summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
...
* | gpio-ts5500: Add dependencyJean Delvare2014-02-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | There is no point in displaying the TS5500-specific driver entries if TS5500 board support itself isn't enabled. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: pca953x: Add Exar XRA1202Aaron Sierra2014-02-131-1/+1
| | | | | | | | | | | | | | | | Add Exar XRA1202 8-bit GPIO expander to supported list. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: pca953x: Add NXP PCA9698Aaron Sierra2014-02-131-2/+2
| | | | | | | | | | | | | | | | | | | | Add the NXP PCA9698 40-bit GPIO expander to the supported list. Note: This only enables GPIO functionality. Tested-by: Bob Schmitz <bschmitz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: pca953x: Add devices to Kconfig helpAaron Sierra2014-02-131-0/+4
| | | | | | | | | | | | | | | | | | | | The pca953x driver supports tca6424 (24-bit) and pca9505 (40-bit) devices. They were the only supported devices not mentioned in the Kconfig help. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Graeme Smecher <gsmecher@threespeedlogic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: pl061: Select IRQ_DOMAIN rather than GENERIC_IRQ_CHIPAxel Lin2014-02-061-1/+1
|/ | | | | | | | | commit f1f70479e999 "gpio: pl061: support irqdomain" drops the support of irq generic chip and use irqdomain instead. Thus fixes the dependency by selecting IRQ_DOMAIN rather than GENERIC_IRQ_CHIP. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'drivers-for-linus' of ↵Linus Torvalds2014-01-231-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
| * gpio: introduce GPIO_DAVINCI kconfig optionGrygorii Strashko2013-12-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The compatible to Davinci GPIO HW block is used by other TI SoCs, like Keystone, where GPIO support is declared as optional. Hence, introduce GPIO_DAVINCI Kconfig option which will allow to enable Davinci GPIO driver for Keystone SoCs when needed. At same time, kept Davinci GPIO driver enabled for Davinci SoCs by default. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
* | Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfdLinus Torvalds2014-01-211-0/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
| * | gpio: add LP3943 I2C GPIO expander driverMilo Kim2014-01-211-0/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is one of LP3943 MFD driver. LP3943 is configurable as a GPIO expander, up to 16 GPIOs. * Application note: how to configure LP3943 as a GPIO expander http://www.ti.com/lit/an/snva287a/snva287a.pdf * Supported GPIO controller operations request, free, direction_input, direction_output, get and set * GPIO direction register not supported LP3943 doesn't have the GPIO direction register. It only provides input and output status registers. So, private data for the direction should be handled manually. This variable is updated whenever the direction is changed and used in 'get' operation. * Pin assignment A driver data, 'pin_used' is checked when a GPIO is requested. If the GPIO is already assigned, then returns as failure. If the GPIO is available, 'pin_used' is set. When the GPIO is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | Merge tag 'gpio-v3.14-1' of ↵Linus Torvalds2014-01-211-5/+32
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO tree bulk changes from Linus Walleij: "A big set this merge window, as we have much going on in this subsystem. The changes to other subsystems (notably a slew of ARM machines as I am doing away with their custom APIs) have all been ACKed to the extent possible. Major changes this time: - Some core improvements and cleanups to the new GPIO descriptor API. This seems to be working now so we can start the exodus to this API, moving gradually away from the global GPIO numberspace. - Incremental improvements to the ACPI GPIO core, and move the few GPIO ACPI clients we have to the GPIO descriptor API right *now* before we go any further. We actually managed to contain this *before* we started to litter the kernel with yet another hackish global numberspace for the ACPI GPIOs, which is a big win. - The RFkill GPIO driver and all platforms using it have been migrated to use the GPIO descriptors rather than fixed number assignments. Tegra machine has been migrated as part of this. - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those should be really good examples of how I expect a nice GPIO driver to look these days. - Do away with custom GPIO implementations on a major part of the ARM machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the same in the horribly convoluted Samsung S3C include forest. We expect to continue to clean this up as we move forward. - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and lynxpoint. This makes the GPIOlib core aware that a certain GPIO line is used for IRQs and can then enforce some semantics such as disallowing a GPIO line marked as in use for IRQ to be switched to output mode. - Drop all use of irq_set_chip_and_handler_name(). The name provided in these cases were just unhelpful tags like "mux" or "demux". - Extend the MCP23s08 driver to handle interrupts. - Minor incremental improvements for rcar, lynxpoint, em 74x164 and msm drivers. - Some non-urgent bug fixes here and there, duplicate #includes and that usual kind of cleanups" Fix up broken Kconfig file manually to make this all compile. * tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits) gpio: mcp23s08: fix casting caused build warning gpio: mcp23s08: depend on OF_GPIO gpio: mcp23s08: Add irq functionality for i2c chips ARM: S5P[v210|c100|64x0]: Fix build error gpio: pxa: clamp gpio get value to [0,1] ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h> ARM: S3C[24|64]xx: move includes back under <mach/> scope Documentation / ACPI: update to GPIO descriptor API gpio / ACPI: get rid of acpi_gpio.h gpio / ACPI: register to ACPI events automatically mmc: sdhci-acpi: convert to use GPIO descriptor API ARM: s3c24xx: fix build error gpio: f7188x: set can_sleep attribute gpio: samsung: Update documentation gpio: samsung: Remove hardware.h inclusion gpio: xtensa: depend on HAVE_XTENSA_GPIO32 gpio: clps711x: Enable driver compilation with COMPILE_TEST gpio: clps711x: Use of_match_ptr() net: rfkill: gpio: convert to descriptor-based GPIO interface leds: s3c24xx: Fix build failure ...
| * gpio: mcp23s08: depend on OF_GPIOLinus Walleij2014-01-201-1/+1
| | | | | | | | | | | | | | | | The MCP drivers fails to compile on trial builds due to missing Kconfig dependency on OF_GPIO. Fix it. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: mcp23s08: Add irq functionality for i2c chipsLars Poeschel2014-01-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds interrupt functionality for i2c chips to the driver. They can act as a interrupt-controller and generate interrupts, if the inputs change. This is tested with a mcp23017 chip on an arm based platform. v3: - be a bit more clear that the irq functionality is also available on spi versions of the chips, but the linux driver does not support this yet v2: - some more word about irq-mirror property in binding doc - use of_read_bool instead of of_find_property for "interrupt-contrller" and "irq-mirror" - cache the "interrupt-controller" for remove function - do set the irq-mirror bit only if device is marked as interrupt-controller - do create the irq mapping and setup of irq_desc of all possible interrupts in probe path instead of in gpio_to_irq - mark gpios as in use as interrupts in irq in irq_startup and unlock it in irq_shutdown - rename virq to child_irq - remove dev argument from mcp23s08_irq_setup function - move gpiochip_add before mcp23s08_irq_setup in probe path Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: xtensa: depend on HAVE_XTENSA_GPIO32Baruch Siach2014-01-071-0/+1
| | | | | | | | | | | | | | | | Prevent build failure when the selected variant does not support GPIO32. Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: clps711x: Enable driver compilation with COMPILE_TESTAlexander Shiyan2014-01-071-1/+1
| | | | | | | | | | | | | | This helps increasing build testing coverage. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: add GPIO support for SMSC SCH311xBruno Randolf2013-12-201-0/+9
| | | | | | | | | | | | | | | | | | | | This patch adds support for the GPIOs found on the SMSC "Super I/ SCH311x. The chip detection and I/O functions are copied from sch311x_wdt. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: driver for Xtensa GPIO32Baruch Siach2013-12-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIO32 is a standard optional extension to the Xtensa architecture core that provides preconfigured output and input ports for intra SoC signaling. The GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) output state called EXPSTATE, and 32bit input wire called IMPWIRE. This driver treats input and output states as two distinct devices. v3: * Use BUG() in xtensa_impwire_set_value() to indicate that it should never be called (Linus Walleij) v2: * Address the comments of Linus Walleij: - Add a few comments - Expand commit log message - Use the BIT() macro for bit offsets - Rewrite CPENABLE handling as static inlines - Use device_initcall() * Depend on !SMP for reason explained in the comments (Marc Gauthier) * Use XCHAL_CP_ID_XTIOP to enable/disable GPIO32 only Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: 74x164: Remove non-DT supportAlexander Shiyan2013-12-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Commit 20bc4d5d565159eb2b942bf4b7fae86fba94e32c (gpio: 74x164: Add support for the daisy-chaining) introduce check for DT for the driver, so driver cannot be used without DT. There are no in-tree users of this driver, so remove non-DT support completely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: Add MOXA ART GPIO driverJonas Jensen2013-12-031-0/+7
| | | | | | | | | | | | | | | | Add GPIO driver for MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio-lynxpoint: Allow building as a moduleJean Delvare2013-12-031-1/+1
|/ | | | | | | | | | | | | | Change CONFIG_GPIO_LYNXPOINT from bool to tristate so that the gpio-lynxpoint driver can be built as a module. Add the required glue: an exit function to unregister the driver, and module information. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-v3.13-1' of ↵Linus Torvalds2013-11-121-10/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "Here is the bulk of GPIO changes for the v3.13 development cycle. I've got ACKs for the things that affect other subsystems (or it's my own subsystem, like pinctrl). Most of that pertain to an attempt from my side to consolidate and get rid of custom GPIO implementations in the ARM tree. I will continue doing this. The main change this time is the new GPIO descriptor API, background for this can be found in Corbet's summary from this january in LWN: http://lwn.net/Articles/533632/ Summary: - Merged the GPIO descriptor API from Alexandre Courbot. This is a first step toward trying to get rid of the global GPIO numberspace for the future. - Add an API so that driver can flag that a certain GPIO line is being used by a irqchip backend for generating IRQs, so that we can enforce checks, like not allowing users to switch that line to an output at runtime, since this makes no sense. Implemented corresponding calls in a few select drivers. - ACPI GPIO cleanups, refactorings and switch to using the descriptor-based interface. - Support for the TPS80036 Palmas GPIO variant. - A new driver for the Broadcom Kona GPIO SoC IP block. - Device tree support for the PCF857x driver. - A set of ARM GPIO refactorings with the goal of getting rid of a bunch of custom GPIO implementations from the arch/arm/* tree: * Move the IOP GPIO driver to the GPIO subsystem and fix all users to use the gpiolib API for accessing GPIOs. Delete the old custom GPIO implementation. * Delete the unused custom PXA GPIO implemention. * Convert all users of the IXP4 custom GPIO implementation to use gpiolib and delete the custom implementation. * Delete the custom Gemini GPIO implementation, also completely unused. - Various cleanups and renamings" * tag 'gpio-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (85 commits) gpio: gpio-mxs: Remove unneeded dt checks gpio: pl061: don't depend on CONFIG_ARM gpio: bcm-kona: add missing .owner to struct gpio_chip gpiolib: provide a declaration of seq_file in gpio/driver.h gpiolib: include gpio/consumer.h in of_gpio.h for desc_to_gpio() gpio: provide stubs for devres gpio functions gpiolib: devres: add missing headers gpiolib: make GPIO_DEVRES depend on GPIOLIB gpiolib: devres: fix devm_gpiod_get_index() gpiolib / ACPI: document the GPIO descriptor based interface gpiolib / ACPI: allow passing GPIOF_ACTIVE_LOW for GpioInt resources gpiolib / ACPI: add ACPI support for gpiod_get_index() gpiolib / ACPI: convert to gpiod interfaces gpiolib: add gpiod_get() and gpiod_put() functions gpiolib: port of_ functions to use gpiod gpiolib: export descriptor-based GPIO interface Fixup "MAINTAINERS: GPIO-INTEL-MID: add maintainer" gpio: bcm281xx: Don't print addresses of GPIO area in probe() gpio: tegra: use new gpio_lock_as_irq() API gpio: rcar: Include linux/of.h header ...
| * gpio: pl061: don't depend on CONFIG_ARMRob Herring2013-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | The pl061 driver has no real dependency on ARM, so remove the kconfig dependency. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpiolib: make GPIO_DEVRES depend on GPIOLIBAlexandre Courbot2013-10-291-4/+4
| | | | | | | | | | | | | | | | | | | | Current Kconfig allows GPIO_DEVRES to be selected and compiled without GPIOLIB. This does not make sense anymore since GPIOLIB has become the exclusive way to deal with GPIOs. This patch makes GPIO_DEVRES available only if GPIOLIB is selected. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: rename gpio-langwell to gpio-intel-midDavid Cohen2013-10-111-3/+3
| | | | | | | | | | | | | | | | | | | | | | gpio-langwell is a deprecated name. Despite the driver was made initially for Langwell, it supports now other Intel Mid SoC's. This patch does no change beside the file renaming with Kconfig/Makefile update. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * Merge branch 'iop-cleanup' into develLinus Walleij2013-09-231-0/+9
| |\
| | * ARM: plat-iop: move the GPIO driver to drivers/gpioLinus Walleij2013-09-201-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the IOP GPIO driver to live with its siblings in the GPIO subsystem. Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | gpio: ucb1400: Can be built as a moduleJean Delvare2013-09-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent code cleanup from Marek Vasut, driver gpio-ucb1400 can be built as a module, so change symbol GPIO_UCB1400 from bool to tristate. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | gpio: bcm281xx: Add GPIO driverMarkus Mayer2013-09-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the GPIO driver for the Broadcom bcm281xx family of mobile SoCs. These GPIO controllers may contain up to 8 banks where each bank includes 32 pins that can be driven high or low and act as an edge sensitive interrupt. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> [Added depends on OF_GPIO] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | emev2: GPIOLIB: Enable support for OFIan Molton2013-09-191-1/+1
| |/ | | | | | | | | | | | | | | | | | | EMEV2 is now a DT platform, however the GPIO driver cannot be used from a DT file since it does not fill out the of_node field in its gpio_chip structure. Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: add TB10x GPIO driverChristian Ruppert2013-10-251-0/+4
|/ | | | | | | | | | | The GPIO driver for the Abilis Systems TB10x series of SOCs based on ARC700 CPUs. It supports GPIO control and GPIO interrupt generation. This driver works in conjunction with the TB10x pinctrl driver. Signed-off-by: Sascha Leuenberger <sascha.leuenberger@abilis.com> Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2013-09-131-3/+3
| | | | | | | | After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-09-121-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This has been sitting in -next for a while with no objections and all MIPS defconfigs except one are building fine; that one platform got broken by another patch in your tree and I'm going to submit a patch separately. - a handful of fixes that didn't make 3.11 - a few bits of Octeon 3 support with more to come for a later release - platform enhancements for Octeon, ath79, Lantiq, Netlogic and Ralink SOCs - a GPIO driver for the Octeon - some dusting off of the DECstation code - the usual dose of cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits) MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code MIPS: kexec: Fix random crashes while loading crashkernel MIPS: kdump: Skip walking indirection page for crashkernels MIPS: DECstation HRT calibration bug fixes MIPS: Export copy_from_user_page() (needed by lustre) MIPS: Add driver for the built-in PCI controller of the RT3883 SoC MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000 MIPS: ralink: Add support for reset-controller API MIPS: ralink: mt7620: Add cpu-feature-override header MIPS: ralink: mt7620: Add spi clock definition MIPS: ralink: mt7620: Add wdt clock definition MIPS: ralink: mt7620: Improve clock frequency detection MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts MIPS: ralink: mt7620: Add verbose ram info MIPS: ralink: Probe clocksources from OF MIPS: ralink: Add support for systick timer found on newer ralink SoC MIPS: ralink: Add support for periodic timer irq MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards MIPS: Netlogic: Add support for USB on XLP2xx MIPS: Netlogic: XLP2xx update for I2C controller ...
| * gpio MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins.David Daney2013-08-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The SOCs in the OCTEON family have 16 (or in some cases 20) on-chip GPIO pins, this driver handles them all. Configuring the pins as interrupt sources is handled elsewhere (OCTEON's irq handling code). Signed-off-by: David Daney <david.daney@cavium.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5633/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | gpio: add GPIO support for F71882FG and F71889FSimon Guinot2013-08-301-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the GPIOs found on the Fintek super-I/O chips F71882FG and F71889F. A super-I/O is a legacy I/O controller embedded on x86 motherboards. It is used to connect the low-bandwidth devices. Among others functions the F71882FG/F71889F provides: a parallel port, two serial ports, a keyboard controller, an hardware monitoring controller and some GPIO pins. Note that this super-I/Os are embedded on some Atom-based LaCie NASes. The GPIOs are used to control the LEDs and the hard drive power. Changes since v3: - Use request_muxed_region to protect the I/O ports against concurrent accesses. Changes since v2: - Remove useless NULL setters for driver data. Changes since v1: - Enhance the commit message by describing what is a Super-I/O. - Use self-explanatory names for the GPIO register macros. - Add a comment to explain the platform device and driver registration. - Fix gpio_get when GPIO is configured in input mode. I only had the hardware to check this mode recently... Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio: Kontron PLD gpio driverGuenter Roeck2013-07-211-0/+12
| | | | | | | | | | | | | | | | | | | | | | Add gpio support for the on-board PLD found on some Kontron embedded modules. Originally-from: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio-tz1090: convert to use generic irqchipJames Hogan2013-07-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Convert gpio-tz1090 driver to use generic irqchips. This allows the irq_ack, irq_mask, and irq_unmask callbacks and associated helper functions to be removed. Also switch to using irq_setup_alt_chip() in the irq_set_type callback instead of using __irq_set_handler_locked(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio-tz1090-pdc: add TZ1090 PDC gpio driverJames Hogan2013-07-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a GPIO driver for the low-power Powerdown Controller GPIOs in the TZ1090 SoC. The driver is instantiated by device tree and supports interrupts for the SysWake GPIOs only. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. Changes in v2: - gpio-tz1090-pdc: remove references to Linux flags in dt bindings - gpio-tz1090-pdc: make use of BIT() from linux/bitops.h - gpio-tz1090-pdc: make register accessors inline to match pinctrl - gpio-tz1090-pdc: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | gpio-tz1090: add TZ1090 gpio driverJames Hogan2013-07-201-0/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a GPIO driver for the main GPIOs found in the TZ1090 (Comet) SoC. This doesn't include low-power GPIOs as they're controlled separately via the Powerdown Controller (PDC) registers. The driver is instantiated by device tree and supports interrupts for all GPIOs. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) - gpio-tz1090: use of_property_read_u32 instead of of_get_property Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - some s/unsigned int/bool/ and use of BIT(). - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. - gpio-tz1090: add REG_ prefix to some constants for consistency. - gpio-tz1090: add comment to explain tz1090_gpio_irq_next_edge cunningness. Changes in v2: - gpio-tz1090: remove references to Linux flags in dt bindings - gpio-tz1090: make use of BIT() from linux/bitops.h - gpio-tz1090: make register accessors inline to match pinctrl - gpio-tz1090: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-for-v3.11-1' of ↵Linus Torvalds2013-07-031-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is a batch of GPIO changes for v3.11. I have agreed with Grant to take care of the pull requests for this development cycle. No special things are happening in the GPIO tree this time (nice with some calm) and I have been extra careful to do regression builds and it's well boiled in -next. GPIO changes for the v3.11 development cycle: - Incremental development for the Langwell (Atom SoC), Xilinx, ICH and RCAR drivers. - Cleanups from Jingoo Han, Axel Lin, Wei Jongjun, Wolfram Sang, Tushar Behera, Sachin Kamat and Yijing Wang" * tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (35 commits) Gpio/trivial: replace numeric with standard PM state macros gpiolib: remove warnning of allocations with IRQs disabled gpio: grgpio: Staticize local symbols gpio-langwell: remove Withney point support gpio: ich: add GPO_BLINK support gpio-sta2x11: Convert to use devm_ioremap_resource gpio_msm: Convert to use devm_ioremap_resource gpio-rcar: Use OUTDT when reading GPIOs configured as output gpio-sta2x11: Fix potential NULL pointer dereference gpio/omap: omap_gpio_init_context stub must be inline gpio: msm-v1: Remove errant __devinit to fix compile gpio: devres: make comments proper GPIO: xilinx: Enable driver for Xilinx zynq DT: Add documentation for gpio-xilinx GPIO: xilinx: Use BIT macro GPIO: xilinx: Use __raw_readl/__raw_writel IO functions GPIO: xilinx: Add support for dual channel GPIO: xilinx: Simplify driver probe function gpio: sx150x: convert to use devm_* functions MAINTAINERS: add linux-gpio mailing list ...
| * GPIO: xilinx: Enable driver for Xilinx zynqMichal Simek2013-06-171-1/+1
| | | | | | | | | | | | | | Enable gpio driver for usage on Xilinx ARM zynq platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * gpio: max7300: Fix trivial typo in Kconfig help textAxel Lin2013-05-301-1/+1
| | | | | | | | | | | | | | | | max7301 is controlled through SPI interface which means another driver. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge tag 'soc-for-linus' of ↵Linus Torvalds2013-07-021-1/+11
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
| * \ Merge tag 'remove-nondt-exynos-3' of ↵Arnd Bergmann2013-06-201-0/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: cleanup and removing dead code for only support DT for exynos - remove board file for exynos - remove legacy files which are not used anymore - decouple ARCH_EXYNOS from PLAT_S5P * tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (35 commits) ARM: EXYNOS: Remove remaining dead code after non-DT support removal ARM: EXYNOS: Remove legacy L2X0 initialization ARM: EXYNOS: Use exynos_init_io() as map_io callback ARM: EXYNOS: Remove custom init_irq callbacks ARM: EXYNOS: Remove mach/regs-usb-phy.h header thermal: exynos: Support both EXYNOS4X12 SoCs ARM: EXYNOS: Remove unused base addresses from mach/map.h header ARM: EXYNOS: Remove mach/irqs.h header ARM: EXYNOS: Select SPARSE_IRQ for Exynos ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS ARM: EXYNOS: Remove mach/regs-gpio.h header ARM: EXYNOS: Remove mach/gpio.h ARM: EXYNOS: Remove setup-i2c0.c ARM: EXYNOS: Do not select legacy Kconfig symbols any more ARM: SAMSUNG: Include most of mach/ headers conditionally ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P USB: Check for ARCH_EXYNOS separately platform: Check for ARCH_EXYNOS separately ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header ... Conflicts: arch/arm/mach-exynos/Kconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entryTomasz Figa2013-06-191-0/+7
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds Kconfig entry that selects whether legacy Samsung GPIO driver should be built or not. For platforms that support only DT based boot, the new pinctrl driver is used and so the old one is not needed. Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| * | GPIO: clps711x: Rewrite driver for using generic GPIO codeAlexander Shiyan2013-06-111-1/+4
| |/ | | | | | | | | | | | | | | | | | | This patch provides rewritten driver for CLPS711X GPIO which uses generic GPIO code. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* | Merge tag 'msm-cleanup-for-3.11' of ↵Olof Johansson2013-06-141-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From David Brown: Cleanups for MSM for 3.11 These are a handful of cleanups to the MSM tree. The gpio cleanups get us closer to having proper pinmux and gpio support. * tag 'msm-cleanup-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: mfd: ssbi: Use devm_* and simplify code gpio: msm: Add device tree and irqdomain support for gpio-msm-v2 ARM: msm: Remove gpiomux-v2 and re-organize MSM_GPIOMUX configs msm: iomap: Remove unused bases and mappings msm: Remove unused file core.h ARM: msm: Remove init_irq declaration in machine description Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/boot/dts/msm8660-surf.dts arch/arm/boot/dts/msm8960-cdp.dts
| * gpio: msm: Add device tree and irqdomain support for gpio-msm-v2Rohit Vaswani2013-06-121-1/+1
| | | | | | | | | | | | | | | | | | | | This cleans up the gpio-msm-v2 driver of all the global define usage. The number of gpios are now defined in the device tree. This enables adding irqdomain support as well. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
* | gpio: mcp23s08: Fix build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=mAxel Lin2013-05-201-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes below build error when CONFIG_SPI_MASTER=y && CONFIG_I2C=m && CONFIG_GPIO_MCP23S08=y. LD init/built-in.o drivers/built-in.o: In function `mcp23017_write': clkdev.c:(.text+0x1e14): undefined reference to `i2c_smbus_write_word_data' drivers/built-in.o: In function `mcp23017_read': clkdev.c:(.text+0x1e24): undefined reference to `i2c_smbus_read_word_data' drivers/built-in.o: In function `mcp23008_write': clkdev.c:(.text+0x1e8c): undefined reference to `i2c_smbus_write_byte_data' drivers/built-in.o: In function `mcp23008_read': clkdev.c:(.text+0x1e98): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23008_read_regs': clkdev.c:(.text+0x1ed0): undefined reference to `i2c_smbus_read_byte_data' drivers/built-in.o: In function `mcp23s08_init': clkdev.c:(.init.text+0x30): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `mcp23s08_exit': clkdev.c:(.exit.text+0x30): undefined reference to `i2c_del_driver' make: *** [vmlinux] Error 1 When CONFIG_I2C=m, meaning we can't build the drivers in with I2C support. Thus don't allow the drivers to be compiled as built-in when CONFIG_I2C=m. The real fix though is to break the driver apart into a SPI part, an I2C part and a common part. But that's something for 3.11 while this is something for 3.10/stable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2013-05-091-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
| * Remove GENERIC_GPIO config optionAlexandre Courbot2013-04-161-1/+0
| | | | | | | | | | | | | | | | | | | | GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge tag 'soc-for-linus-2' of ↵Linus Torvalds2013-05-071-0/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 2) from Arnd Bergmann: "These patches are all for Renesas shmobile, and depend on the earlier pinctrl updates. Remarkably, this adds support for three new SoCs: r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is for pinctrl (using the new subsystem) and for clocks (not yet using the common clock subsystem). The latter will have to get converted in one of the upcoming releases, but shmobile is not ready for that yet. The series also contains Renesas shmobile board changes, adding one board file for each of the three new SoCs. These boards are using a mix of classic and device-tree based probing, as there is still a lot of infrastructure in shmobile that has not been converted to DT yet. Once those are resolved to the degree that no board specific setup code is needed, they can get folded into the respective SoC setup files." * tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: shmobile: use r8a7790 timer setup code on Lager ARM: shmobile: force enable of r8a7790 arch timer ARM: shmobile: Add second I/O range for r8a7790 PFC ARM: shmobile: bockw: enable network settings on bootargs ARM: shmobile: bockw: add SMSC ethernet support ARM: shmobile: R8A7778: add Ether support ARM: shmobile: bockw: enable SMSC ethernet on defconfig ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin() ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO() ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support ...
OpenPOWER on IntegriCloud