summaryrefslogtreecommitdiffstats
path: root/drivers/firmware
Commit message (Collapse)AuthorAgeFilesLines
* Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-3/+3
| | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it existsZhenzhong Duan2012-12-201-15/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | The right dmi version is in SMBIOS if it's zero in DMI region This issue was originally found from an oracle bug. One customer noticed system UUID doesn't match between dmidecode & uek2. - HP ProLiant BL460c G6 : # cat /sys/devices/virtual/dmi/id/product_uuid 00000000-0000-4C48-3031-4D5030333531 # dmidecode | grep -i uuid UUID: 00000000-0000-484C-3031-4D5030333531 From SMBIOS 2.6 on, spec use little-endian encoding for UUID other than network byte order. So we need to get dmi version to distinguish. If version is 0.0, the real version is taken from the SMBIOS version. This is part of original kernel comment in code. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Feng Jin <joe.jin@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/firmware/dmi_scan.c: check dmi version when get system uuidZhenzhong Duan2012-12-201-3/+15
| | | | | | | | | | | | | | As of version 2.6 of the SMBIOS specification, the first 3 fields of the UUID are supposed to be little-endian encoded. Also a minor fix to match variable meaning and mute checkpatch.pl [akpm@linux-foundation.org: tweak code comment] Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Feng Jin <joe.jin@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* efi: Fix the build with user namespaces enabled.Eric W. Biederman2012-12-171-1/+0
| | | | | | | | | | | | | | | | When compiling efivars.c the build fails with: CC drivers/firmware/efivars.o drivers/firmware/efivars.c: In function ‘efivarfs_get_inode’: drivers/firmware/efivars.c:886:31: error: incompatible types when assigning to type ‘kgid_t’ from type ‘int’ make[2]: *** [drivers/firmware/efivars.o] Error 1 make[1]: *** [drivers/firmware/efivars.o] Error 2 Fix the build error by removing the duplicate initialization of i_uid and i_gid inode_init_always has already initialized them to 0. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'core-efi-for-linus' of ↵Linus Torvalds2012-12-141-8/+504
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI update from Peter Anvin: "EFI tree, from Matt Fleming. Most of the patches are the new efivarfs filesystem by Matt Garrett & co. The balance are support for EFI wallclock in the absence of a hardware-specific driver, and various fixes and cleanups." * 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) efivarfs: Make efivarfs_fill_super() static x86, efi: Check table header length in efi_bgrt_init() efivarfs: Use query_variable_info() to limit kmalloc() efivarfs: Fix return value of efivarfs_file_write() efivarfs: Return a consistent error when efivarfs_get_inode() fails efivarfs: Make 'datasize' unsigned long efivarfs: Add unique magic number efivarfs: Replace magic number with sizeof(attributes) efivarfs: Return an error if we fail to read a variable efi: Clarify GUID length calculations efivarfs: Implement exclusive access for {get,set}_variable efivarfs: efivarfs_fill_super() ensure we clean up correctly on error efivarfs: efivarfs_fill_super() ensure we free our temporary name efivarfs: efivarfs_fill_super() fix inode reference counts efivarfs: efivarfs_create() ensure we drop our reference on inode on error efivarfs: efivarfs_file_read ensure we free data in error paths x86-64/efi: Use EFI to deal with platform wall clock (again) x86/kernel: remove tboot 1:1 page table creation code x86, efi: 1:1 pagetable mapping for virtual EFI calls x86, mm: Include the entire kernel memory map in trampoline_pgd ...
| * efivarfs: Make efivarfs_fill_super() staticMatt Fleming2012-11-151-1/+1
| | | | | | | | | | | | | | | | | | | | sparse is complaining that efivarfs_fill_super() doesn't have a prototype. Make it static to avoid the warning. Cc: Xie ChanglongX <changlongx.xie@intel.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Use query_variable_info() to limit kmalloc()Matt Fleming2012-11-131-9/+34
| | | | | | | | | | | | | | | | | | | | | | We don't want someone who can write EFI variables to be able to allocate arbitrarily large amounts of memory, so cap it to something sensible like the amount of free space for EFI variables. Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Fix return value of efivarfs_file_write()Matt Fleming2012-10-301-5/+8
| | | | | | | | | | | | | | | | | | | | We're stuffing a variable of type size_t (unsigned) into a ssize_t (signed) which, even though both types should be the same number of bits, it's just asking for sign issues to be introduced. Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Return a consistent error when efivarfs_get_inode() failsMatt Fleming2012-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | Instead of returning -ENOSPC if efivarfs_get_inode() fails we should be returning -ENOMEM, since running out of memory is the only reason it can fail. Furthermore, that's the error value used everywhere else in this file. It's also less likely to confuse users that hit this error case. Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Make 'datasize' unsigned longMatt Fleming2012-10-301-1/+1
| | | | | | | | | | | | | | | | | | There's no reason to declare 'datasize' as an int, since the majority of the functions it's passed to expect an unsigned long anyway. Plus, this way we avoid any sign problems during arithmetic. Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Add unique magic numberMatt Fleming2012-10-301-1/+1
| | | | | | | | | | | | | | | | Using pstore's superblock magic number is no doubt going to cause problems in the future. Give efivarfs its own magic number. Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Replace magic number with sizeof(attributes)Matt Fleming2012-10-301-4/+4
| | | | | | | | | | | | | | | | | | Seeing "+ 4" littered throughout the functions gets a bit confusing. Use "sizeof(attributes)" which clearly explains what quantity we're adding. Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Return an error if we fail to read a variableMatt Fleming2012-10-301-26/+36
| | | | | | | | | | | | | | | | | | | | Instead of always returning 0 in efivarfs_file_read(), even when we fail to successfully read the variable, convert the EFI status to something meaningful and return that to the caller. This way the user will have some hint as to why the read failed. Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: Clarify GUID length calculationsJeremy Kerr2012-10-301-8/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present, the handling of GUIDs in efivar file names isn't consistent. We use GUID_LEN in some places, and 38 in others (GUID_LEN plus separator), and implicitly use the presence of the trailing NUL. This change removes the trailing NUL from GUID_LEN, so that we're explicitly adding it when required. We also replace magic numbers with GUID_LEN, and clarify the comments where appropriate. We also fix the allocation size in efivar_create_sysfs_entry, where we're allocating one byte too much, due to counting the trailing NUL twice - once when calculating short_name_size, and once in the kzalloc. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: Implement exclusive access for {get,set}_variableJeremy Kerr2012-10-301-25/+43
| | | | | | | | | | | | | | | | | | | | | | | | Currently, efivarfs does not enforce exclusion over the get_variable and set_variable operations. Section 7.1 of UEFI requires us to only allow a single processor to enter {get,set}_variable services at once. This change acquires the efivars->lock over calls to these operations from the efivarfs paths. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: efivarfs_fill_super() ensure we clean up correctly on errorAndy Whitcroft2012-10-301-2/+18
| | | | | | | | | | | | | | | | | | | | Ensure we free both the name and inode on error when building the individual variables. Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: efivarfs_fill_super() ensure we free our temporary nameAndy Whitcroft2012-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | d_alloc_name() copies the passed name to new storage, once complete we no longer need our name. Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: efivarfs_fill_super() fix inode reference countsAndy Whitcroft2012-10-301-12/+4
| | | | | | | | | | | | | | | | | | | | When d_make_root() fails it will automatically drop the reference on the root inode. We should not be doing so as well. Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: efivarfs_create() ensure we drop our reference on inode on errorAndy Whitcroft2012-10-301-5/+9
| | | | | | | | | | | | | | Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efivarfs: efivarfs_file_read ensure we free data in error pathsAndy Whitcroft2012-10-301-3/+3
| | | | | | | | | | | | | | Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: add efivars kobject to efi sysfs folderLee, Chun-Yi2012-10-301-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | UEFI variable filesystem need a new mount point, so this patch add efivars kobject to efi_kobj for create a /sys/firmware/efi/efivars folder. Cc: Matthew Garrett <mjg@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: Handle deletions and size changes in efivarfs_write_fileJeremy Kerr2012-10-301-10/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A write to an efivarfs file will not always result in a variable of 'count' size after the EFI SetVariable() call. We may have appended to the existing data (ie, with the EFI_VARIABLE_APPEND_WRITE attribute), or even have deleted the variable (with an authenticated variable update, with a zero datasize). This change re-reads the updated variable from firmware, to check for size changes and deletions. In the latter case, we need to drop the dentry. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
| * efi: Add support for a UEFI variable filesystemMatthew Garrett2012-10-301-6/+378
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The existing EFI variables code only supports variables of up to 1024 bytes. This limitation existed in version 0.99 of the EFI specification, but was removed before any full releases. Since variables can now be larger than a single page, sysfs isn't the best interface for this. So, instead, let's add a filesystem. Variables can be read, written and created, with the first 4 bytes of each variable representing its UEFI attributes. The create() method doesn't actually commit to flash since zero-length variables can't exist per-spec. Updates from Jeremy Kerr <jeremy.kerr@canonical.com>. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | efi_pstore: Add a format check for an existing variable name at erasing timeSeiji Aguchi2012-11-261-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Issue] a format of variable name has been updated to type, id, count and ctime to support holding multiple logs. Format of current variable name dump-type0-1-2-12345678 type:0 id:1 count:2 ctime:12345678 On the other hand, if an old variable name before being updated remains, users can't erase it via /dev/pstore. Format of old variable name dump-type0-1-12345678 type:0 id:1 ctime:12345678 [Solution] This patch add a format check for the old variable name in a erase callback to make it erasable. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | efi_pstore: Add a format check for an existing variable name at reading timeSeiji Aguchi2012-11-261-10/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Issue] a format of variable name has been updated to type, id, count and ctime to support holding multiple logs. Format of current variable name dump-type0-1-2-12345678 type:0 id:1 count:2 ctime:12345678 On the other hand, if an old variable name before being updated remains, users can't read it via /dev/pstore. Format of old variable name dump-type0-1-12345678 type:0 id:1 ctime:12345678 [Solution] This patch add a format check for the old variable name in a read callback to make it readable. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | efi_pstore: Add a sequence counter to a variable nameSeiji Aguchi2012-11-261-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Issue] Currently, a variable name, which identifies each entry, consists of type, id and ctime. But if multiple events happens in a short time, a second/third event may fail to log because efi_pstore can't distinguish each event with current variable name. [Solution] A reasonable way to identify all events precisely is introducing a sequence counter to the variable name. The sequence counter has already supported in a pstore layer with "oopscount". So, this patch adds it to a variable name. Also, it is passed to read/erase callbacks of platform drivers in accordance with the modification of the variable name. <before applying this patch> a variable name of first event: dump-type0-1-12345678 a variable name of second event: dump-type0-1-12345678 type:0 id:1 ctime:12345678 If multiple events happen in a short time, efi_pstore can't distinguish them because variable names are same among them. <after applying this patch> it can be distinguishable by adding a sequence counter as follows. a variable name of first event: dump-type0-1-1-12345678 a variable name of Second event: dump-type0-1-2-12345678 type:0 id:1 sequence counter: 1(first event), 2(second event) ctime:12345678 In case of a write callback executed in pstore_console_write(), "0" is added to an argument of the write callback because it just logs all kernel messages and doesn't need to care about multiple events. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | efi_pstore: Add ctime to argument of erase callbackSeiji Aguchi2012-11-261-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Issue] Currently, a variable name, which is used to identify each log entry, consists of type, id and ctime. But an erase callback does not use ctime. If efi_pstore supported just one log, type and id were enough. However, in case of supporting multiple logs, it doesn't work because it can't distinguish each entry without ctime at erasing time. <Example> As you can see below, efi_pstore can't differentiate first event from second one without ctime. a variable name of first event: dump-type0-1-12345678 a variable name of second event: dump-type0-1-23456789 type:0 id:1 ctime:12345678, 23456789 [Solution] This patch adds ctime to an argument of an erase callback. It works across reboots because ctime of pstore means the date that the record was originally stored. To do this, efi_pstore saves the ctime to variable name at writing time and passes it to pstore at reading time. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | efi_pstore: Remove a logic erasing entries from a write callback to hold ↵Seiji Aguchi2012-11-261-37/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | multiple logs [Issue] Currently, efi_pstore driver simply overwrites existing panic messages in NVRAM. So, in the following scenario, we will lose 1st panic messages. 1. kernel panics. 2. efi_pstore is kicked and writes panic messages to NVRAM. 3. system reboots. 4. kernel panics again before a user checks the 1st panic messages in NVRAM. [Solution] A reasonable solution to fix the issue is just holding multiple logs without erasing existing entries. This patch removes a logic erasing existing entries in a write callback because the logic is not needed in the write callback to support holding multiple logs. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | efi_pstore: Add a logic erasing entries to an erase callbackSeiji Aguchi2012-11-261-1/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Issue] Currently, efi_pstore driver simply overwrites existing panic messages in NVRAM. So, in the following scenario, we will lose 1st panic messages. 1. kernel panics. 2. efi_pstore is kicked and writes panic messages to NVRAM. 3. system reboots. 4. kernel panics again before a user checks the 1st panic messages in NVRAM. [Solution] A reasonable solution to fix the issue is just holding multiple logs without erasing existing entries. This patch freshly adds a logic erasing existing entries, which shared with a write callback, to an erase callback. To support holding multiple logs, the write callback doesn't need to erase any entries and it will be removed in a subsequent patch. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | efi_pstore: Check remaining space with QueryVariableInfo() before writing dataSeiji Aguchi2012-11-261-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Issue] As discussed in a thread below, Running out of space in EFI isn't a well-tested scenario. And we wouldn't expect all firmware to handle it gracefully. http://marc.info/?l=linux-kernel&m=134305325801789&w=2 On the other hand, current efi_pstore doesn't check a remaining space of storage at writing time. Therefore, efi_pstore may not work if it tries to write a large amount of data. [Patch Description] To avoid handling the situation above, this patch checks if there is a space enough to log with QueryVariableInfo() before writing data. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | firmware/memmap: avoid type conflicts with the generic memmap_init()Fengguang Wu2012-10-191-2/+2
|/ | | | | | | | | | | | | Fix this build error: drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init' arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Bernhard Walle <bwalle@suse.de> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* firmware: Add missing attributes to EFI variable attribute print out from sysfsKhalid Aziz2012-09-101-3/+14
| | | | | | | | | | | | | Some of the EFI variable attributes are missing from print out from /sys/firmware/efi/vars/*/attributes. This patch adds those in. It also updates code to use pre-defined constants for masking current value of attributes. Signed-off-by: Khalid Aziz <khalid.aziz@hp.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'random_for_linus' of ↵Linus Torvalds2012-07-311-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
| * dmi: Feed DMI table to /dev/random driverTony Luck2012-07-241-0/+3
| | | | | | | | | | | | | | | | Send the entire DMI (SMBIOS) table to the /dev/random driver to help seed its pools. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* | firmware_map: make firmware_map_add_early() argument consistent with ↵Yasuaki Ishimatsu2012-07-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | firmware_map_add_hotplug() There are two ways to create /sys/firmware/memmap/X sysfs: - firmware_map_add_early When the system starts, it is calledd from e820_reserve_resources() - firmware_map_add_hotplug When the memory is hot plugged, it is called from add_memory() But these functions are called without unifying value of end argument as below: - end argument of firmware_map_add_early() : start + size - 1 - end argument of firmware_map_add_hogplug() : start + size The patch unifies them to "start + size". Even if applying the patch, /sys/firmware/memmap/X/end file content does not change. [akpm@linux-foundation.org: clarify comments] Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | pcdp: use early_ioremap/early_iounmap to access pcdp tableGreg Pearson2012-07-301-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | efi_setup_pcdp_console() is called during boot to parse the HCDP/PCDP EFI system table and setup an early console for printk output. The routine uses ioremap/iounmap to setup access to the HCDP/PCDP table information. The call to ioremap is happening early in the boot process which leads to a panic on x86_64 systems: panic+0x01ca do_exit+0x043c oops_end+0x00a7 no_context+0x0119 __bad_area_nosemaphore+0x0138 bad_area_nosemaphore+0x000e do_page_fault+0x0321 page_fault+0x0020 reserve_memtype+0x02a1 __ioremap_caller+0x0123 ioremap_nocache+0x0012 efi_setup_pcdp_console+0x002b setup_arch+0x03a9 start_kernel+0x00d4 x86_64_start_reservations+0x012c x86_64_start_kernel+0x00fe This replaces the calls to ioremap/iounmap in efi_setup_pcdp_console() with calls to early_ioremap/early_iounmap which can be called during early boot. This patch was tested on an x86_64 prototype system which uses the HCDP/PCDP table for early console setup. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Khalid Aziz <khalid.aziz@hp.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* efivars: Improve variable validationMatthew Garrett2012-05-031-16/+30
| | | | | | | | | | Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* efi: Validate UEFI boot variablesMatthew Garrett2012-04-301-0/+182
| | | | | | | | | | | | | A common flaw in UEFI systems is a refusal to POST triggered by a malformed boot variable. Once in this state, machines may only be restored by reflashing their firmware with an external hardware device. While this is obviously a firmware bug, the serious nature of the outcome suggests that operating systems should filter their variable writes in order to prevent a malicious user from rendering the machine unusable. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-01-123-166/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
| * Merge branch 'mfd/wm8994' of ↵Mark Brown2011-12-131-4/+2
| |\ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3
| * | ASoC: Move SigmaDSP firmware loader to ASoCLars-Peter Clausen2011-11-293-166/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been pointed out previously, that the firmware subsystem is not the right place for the SigmaDSP firmware loader. Furthermore the SigmaDSP is currently only used in audio products and we are aiming for better integration into the ASoC framework in the future, with support for ALSA controls for firmware parameters and support dynamic power management as well. So the natural choice for the SigmaDSP firmware loader is the ASoC subsystem. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | Merge branch 'for-linus2' of ↵Linus Torvalds2012-01-081-6/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
| * | | switch ->is_visible() to returning umode_tAl Viro2012-01-031-6/+6
| | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | | Merge branch 'driver-core-next' of ↵Linus Torvalds2012-01-071-1/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
| * \ \ \ Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman2012-01-061-1/+2
| |\ \ \ \ | | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | | firmware: google: fix gsmi.c build warningMaxin B. John2011-12-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use min_t() macro instead of min() to fix a build warning: CC drivers/firmware/google/gsmi.o drivers/firmware/google/gsmi.c: In function ‘gsmi_get_variable’: drivers/firmware/google/gsmi.c:348: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Maxin B. John <maxin.john@gmail.com> Acked-By: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | Merge branch 'pstore' of ↵Linus Torvalds2012-01-061-3/+5
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux * 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: gracefully handle NULL pstore_info functions pstore: pass reason to backend write callback
| * | | | pstore: pass reason to backend write callbackKees Cook2011-11-171-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows a backend to filter on the dmesg reason as well as the pstore reason. When ramoops is switched to pstore, this is needed since it has no interest in storing non-crash dmesg details. Drop pstore_write() as it has no users, and handling the "reason" here has no obviously correct value. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | | | | Merge branch 'linux-next' of ↵Linus Torvalds2011-12-152-26/+42
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: ibft: Fix finding IBFT ACPI table on UEFI
| * | | | | ibft: Fix finding IBFT ACPI table on UEFIYinghai Lu2011-12-132-26/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
OpenPOWER on IntegriCloud