summaryrefslogtreecommitdiffstats
path: root/drivers/dma
Commit message (Collapse)AuthorAgeFilesLines
* dma: edma.c: remove edma_desc leakageGeyslan G. Bem2013-10-111-0/+1
| | | | | | | Free memory allocated to edma_desc when failing to allocate slot. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* rcar-hpbdma: add parameter to set_slave() methodSergei Shtylyov2013-10-111-2/+5
| | | | | | | | | | | | | | | | | | | | Commit 4981c4dc194efb18f0e9a02f1b43e926f2f0d2bb (DMA: shdma: switch DT mode to use configuration data from a match table) added a new parameter to set_slave() method but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the old prototype which caused this warning: drivers/dma/sh/rcar-hpbdma.c:485: warning: initialization from incompatible pointer type The newly added parameter is used to override DMA slave address from 'struct hpb_dmae_slave_config', so we have to add the 'slave_addr' field to 'struct hpb_dmae_chan', conditionally assign it in set_slave() method, and return in slave_addr() method. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* rcar-hpbdma: remove shdma_free_irq() callsSergei Shtylyov2013-10-111-2/+0
| | | | | | | | | | | | | | | | | | Commit c1c63a14f4f2419d093acd7164eccdff315baa86 (DMA: shdma: switch to managed resource allocation) got rid of shdma_free_irq() but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a709ac8ff1fe1af9 (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the calls and got broken: drivers/dma/sh/rcar-hpbdma.c: In function `hpb_dmae_alloc_chan_resources': drivers/dma/sh/rcar-hpbdma.c:435: error: implicit declaration of function `shdma_free_irq' Fix this compilation error by removing the remaining shdma_free_irq() calls. Reported-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: imx-dma: fix callback path in taskletMichael Grzeschik2013-10-041-4/+6
| | | | | | | | | | We need to free the ld_active list head before jumping into the callback routine. Otherwise the callback could run into issue_pending and change our ld_active list head we just going to free. This will run the channel list into an currupted and undefined state. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: imx-dma: fix lockdep issue between irqhandler and taskletMichael Grzeschik2013-10-041-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tasklet and irqhandler are using spin_lock while other routines are using spin_lock_irqsave/restore. This leads to lockdep issues as described bellow. This patch is changing the code to use spinlock_irq_save/restore in both code pathes. As imxdma_xfer_desc always gets called with spin_lock_irqsave lock held, this patch also removes the spare call inside the routine to avoid double locking. [ 403.358162] ================================= [ 403.362549] [ INFO: inconsistent lock state ] [ 403.366945] 3.10.0-20130823+ #904 Not tainted [ 403.371331] --------------------------------- [ 403.375721] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 403.381769] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 403.386762] (&(&imxdma->lock)->rlock){?.-...}, at: [<c019d77c>] imxdma_tasklet+0x20/0x134 [ 403.395201] {IN-HARDIRQ-W} state was registered at: [ 403.400108] [<c004b264>] mark_lock+0x2a0/0x6b4 [ 403.404798] [<c004d7c8>] __lock_acquire+0x650/0x1a64 [ 403.410004] [<c004f15c>] lock_acquire+0x94/0xa8 [ 403.414773] [<c02f74e4>] _raw_spin_lock+0x54/0x8c [ 403.419720] [<c019d094>] dma_irq_handler+0x78/0x254 [ 403.424845] [<c0061124>] handle_irq_event_percpu+0x38/0x1b4 [ 403.430670] [<c00612e4>] handle_irq_event+0x44/0x64 [ 403.435789] [<c0063a70>] handle_level_irq+0xd8/0xf0 [ 403.440903] [<c0060a20>] generic_handle_irq+0x28/0x38 [ 403.446194] [<c0009cc4>] handle_IRQ+0x68/0x8c [ 403.450789] [<c0008714>] avic_handle_irq+0x3c/0x48 [ 403.455811] [<c0008f84>] __irq_svc+0x44/0x74 [ 403.460314] [<c0040b04>] cpu_startup_entry+0x88/0xf4 [ 403.465525] [<c02f00d0>] rest_init+0xb8/0xe0 [ 403.470045] [<c03e07dc>] start_kernel+0x28c/0x2d4 [ 403.474986] [<a0008040>] 0xa0008040 [ 403.478709] irq event stamp: 50854 [ 403.482140] hardirqs last enabled at (50854): [<c001c6b8>] tasklet_action+0x38/0xdc [ 403.489954] hardirqs last disabled at (50853): [<c001c6a0>] tasklet_action+0x20/0xdc [ 403.497761] softirqs last enabled at (50850): [<c001bc64>] _local_bh_enable+0x14/0x18 [ 403.505741] softirqs last disabled at (50851): [<c001c268>] irq_exit+0x88/0xdc [ 403.513026] [ 403.513026] other info that might help us debug this: [ 403.519593] Possible unsafe locking scenario: [ 403.519593] [ 403.525548] CPU0 [ 403.528020] ---- [ 403.530491] lock(&(&imxdma->lock)->rlock); [ 403.534828] <Interrupt> [ 403.537474] lock(&(&imxdma->lock)->rlock); [ 403.541983] [ 403.541983] *** DEADLOCK *** [ 403.541983] [ 403.547951] no locks held by swapper/0. [ 403.551813] [ 403.551813] stack backtrace: [ 403.556222] CPU: 0 PID: 0 Comm: swapper Not tainted 3.10.0-20130823+ #904 [ 403.563039] Backtrace: [ 403.565581] [<c000b98c>] (dump_backtrace+0x0/0x10c) from [<c000bb28>] (show_stack+0x18/0x1c) [ 403.574054] r6:00000000 r5:c05c51d8 r4:c040bd58 r3:00200000 [ 403.579872] [<c000bb10>] (show_stack+0x0/0x1c) from [<c02f398c>] (dump_stack+0x20/0x28) [ 403.587955] [<c02f396c>] (dump_stack+0x0/0x28) from [<c02f29c8>] (print_usage_bug.part.28+0x224/0x28c) [ 403.597340] [<c02f27a4>] (print_usage_bug.part.28+0x0/0x28c) from [<c004b404>] (mark_lock+0x440/0x6b4) [ 403.606682] r8:c004a41c r7:00000000 r6:c040bd58 r5:c040c040 r4:00000002 [ 403.613566] [<c004afc4>] (mark_lock+0x0/0x6b4) from [<c004d844>] (__lock_acquire+0x6cc/0x1a64) [ 403.622244] [<c004d178>] (__lock_acquire+0x0/0x1a64) from [<c004f15c>] (lock_acquire+0x94/0xa8) [ 403.631010] [<c004f0c8>] (lock_acquire+0x0/0xa8) from [<c02f74e4>] (_raw_spin_lock+0x54/0x8c) [ 403.639614] [<c02f7490>] (_raw_spin_lock+0x0/0x8c) from [<c019d77c>] (imxdma_tasklet+0x20/0x134) [ 403.648434] r6:c3847010 r5:c040e890 r4:c38470d4 [ 403.653194] [<c019d75c>] (imxdma_tasklet+0x0/0x134) from [<c001c70c>] (tasklet_action+0x8c/0xdc) [ 403.662013] r8:c0599160 r7:00000000 r6:00000000 r5:c040e890 r4:c3847114 r3:c019d75c [ 403.670042] [<c001c680>] (tasklet_action+0x0/0xdc) from [<c001bd4c>] (__do_softirq+0xe4/0x1f0) [ 403.678687] r7:00000101 r6:c0402000 r5:c059919c r4:00000001 [ 403.684498] [<c001bc68>] (__do_softirq+0x0/0x1f0) from [<c001c268>] (irq_exit+0x88/0xdc) [ 403.692652] [<c001c1e0>] (irq_exit+0x0/0xdc) from [<c0009cc8>] (handle_IRQ+0x6c/0x8c) [ 403.700514] r4:00000030 r3:00000110 [ 403.704192] [<c0009c5c>] (handle_IRQ+0x0/0x8c) from [<c0008714>] (avic_handle_irq+0x3c/0x48) [ 403.712664] r5:c0403f28 r4:c0593ebc [ 403.716343] [<c00086d8>] (avic_handle_irq+0x0/0x48) from [<c0008f84>] (__irq_svc+0x44/0x74) [ 403.724733] Exception stack(0xc0403f28 to 0xc0403f70) [ 403.729841] 3f20: 00000001 00000004 00000000 20000013 c0402000 c04104a8 [ 403.738078] 3f40: 00000002 c0b69620 a0004000 41069264 a03fb5f4 c0403f7c c0403f40 c0403f70 [ 403.746301] 3f60: c004b92c c0009e74 20000013 ffffffff [ 403.751383] r6:ffffffff r5:20000013 r4:c0009e74 r3:c004b92c [ 403.757210] [<c0009e30>] (arch_cpu_idle+0x0/0x4c) from [<c0040b04>] (cpu_startup_entry+0x88/0xf4) [ 403.766161] [<c0040a7c>] (cpu_startup_entry+0x0/0xf4) from [<c02f00d0>] (rest_init+0xb8/0xe0) [ 403.774753] [<c02f0018>] (rest_init+0x0/0xe0) from [<c03e07dc>] (start_kernel+0x28c/0x2d4) [ 403.783051] r6:c03fc484 r5:ffffffff r4:c040a0e0 [ 403.787797] [<c03e0550>] (start_kernel+0x0/0x2d4) from [<a0008040>] (0xa0008040) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: imx-dma: fix slow path issue in prep_dma_cyclicMichael Grzeschik2013-10-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When perparing cyclic_dma buffers by the sound layer, it will dump the following lockdep trace. The leading snd_pcm_action_single get called with read_lock_irq called. To fix this, we change the kcalloc call from GFP_KERNEL to GFP_ATOMIC. WARNING: at kernel/lockdep.c:2740 lockdep_trace_alloc+0xcc/0x114() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) Modules linked in: CPU: 0 PID: 832 Comm: aplay Not tainted 3.11.0-20130823+ #903 Backtrace: [<c000b98c>] (dump_backtrace+0x0/0x10c) from [<c000bb28>] (show_stack+0x18/0x1c) r6:c004c090 r5:00000009 r4:c2e0bd18 r3:00404000 [<c000bb10>] (show_stack+0x0/0x1c) from [<c02f397c>] (dump_stack+0x20/0x28) [<c02f395c>] (dump_stack+0x0/0x28) from [<c001531c>] (warn_slowpath_common+0x54/0x70) [<c00152c8>] (warn_slowpath_common+0x0/0x70) from [<c00153dc>] (warn_slowpath_fmt+0x38/0x40) r8:00004000 r7:a3b90000 r6:000080d0 r5:60000093 r4:c2e0a000 r3:00000009 [<c00153a4>] (warn_slowpath_fmt+0x0/0x40) from [<c004c090>] (lockdep_trace_alloc+0xcc/0x114) r3:c03955d8 r2:c03907db [<c004bfc4>] (lockdep_trace_alloc+0x0/0x114) from [<c008f16c>] (__kmalloc+0x34/0x118) r6:000080d0 r5:c3800120 r4:000080d0 r3:c040a0f8 [<c008f138>] (__kmalloc+0x0/0x118) from [<c019c95c>] (imxdma_prep_dma_cyclic+0x64/0x168) r7:a3b90000 r6:00000004 r5:c39d8420 r4:c3847150 [<c019c8f8>] (imxdma_prep_dma_cyclic+0x0/0x168) from [<c024618c>] (snd_dmaengine_pcm_trigger+0xa8/0x160) [<c02460e4>] (snd_dmaengine_pcm_trigger+0x0/0x160) from [<c0241fa8>] (soc_pcm_trigger+0x90/0xb4) r8:c058c7b0 r7:c3b8140c r6:c39da560 r5:00000001 r4:c3b81000 [<c0241f18>] (soc_pcm_trigger+0x0/0xb4) from [<c022ece4>] (snd_pcm_do_start+0x2c/0x38) r7:00000000 r6:00000003 r5:c058c7b0 r4:c3b81000 [<c022ecb8>] (snd_pcm_do_start+0x0/0x38) from [<c022e958>] (snd_pcm_action_single+0x40/0x6c) [<c022e918>] (snd_pcm_action_single+0x0/0x6c) from [<c022ea64>] (snd_pcm_action_lock_irq+0x7c/0x9c) r7:00000003 r6:c3b810f0 r5:c3b810f0 r4:c3b81000 [<c022e9e8>] (snd_pcm_action_lock_irq+0x0/0x9c) from [<c023009c>] (snd_pcm_common_ioctl1+0x7f8/0xfd0) r8:c3b7f888 r7:005407b8 r6:c2c991c0 r5:c3b81000 r4:c3b81000 r3:00004142 [<c022f8a4>] (snd_pcm_common_ioctl1+0x0/0xfd0) from [<c023117c>] (snd_pcm_playback_ioctl1+0x464/0x488) [<c0230d18>] (snd_pcm_playback_ioctl1+0x0/0x488) from [<c02311d4>] (snd_pcm_playback_ioctl+0x34/0x40) r8:c3b7f888 r7:00004142 r6:00000004 r5:c2c991c0 r4:005407b8 [<c02311a0>] (snd_pcm_playback_ioctl+0x0/0x40) from [<c00a14a4>] (vfs_ioctl+0x30/0x44) [<c00a1474>] (vfs_ioctl+0x0/0x44) from [<c00a1fe8>] (do_vfs_ioctl+0x55c/0x5c0) [<c00a1a8c>] (do_vfs_ioctl+0x0/0x5c0) from [<c00a208c>] (SyS_ioctl+0x40/0x68) [<c00a204c>] (SyS_ioctl+0x0/0x68) from [<c0009380>] (ret_fast_syscall+0x0/0x44) r8:c0009544 r7:00000036 r6:bedeaa58 r5:00000000 r4:000000c0 Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMAJosh Boyer2013-09-171-0/+1
| | | | | | | | | | | | | | | | | | | | The TI_EDMA driver unconditionally calls functions provided by the TI_PRIV_EDMA code, but it doesn't force that to be built-in. If that isn't otherwise enabled somewhere, you can get build errors like: linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:593: undefined reference to `edma_free_slot' drivers/built-in.o: In function `edma_terminate_all': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:169: undefined reference to `edma_stop' drivers/built-in.o: In function `edma_execute': linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:122: undefined reference to `edma_write_slot' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:149: undefined reference to `edma_link' linux-3.12.0-0.rc0.git1.1.fc21.armv7hl/drivers/dma/edma.c:152: undefined reference to `edma_start' Make TI_EDMA select TI_PRIV_EDMA to avoid this. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* edma: Update author email addressJosh Boyer2013-09-171-1/+1
| | | | | | | | | Matt's @ti.com address bounces. Update the MODULE_AUTHOR information in edma.c to his Linaro address. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Acked-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2013-09-131-1/+0
| | | | | | | | After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2013-09-1038-636/+2941
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine updates from Vinod Koul: "This pull brings: - Andy's DW driver updates - Guennadi's sh driver updates - Pl08x driver fixes from Tomasz & Alban - Improvements to mmp_pdma by Daniel - TI EDMA fixes by Joel - New drivers: - Hisilicon k3dma driver - Renesas rcar dma driver - New API for publishing slave driver capablities - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dma: edma: Remove limits on number of slots dma: edma: Leave linked to Null slot instead of DUMMY slot dma: edma: Find missed events and issue them ARM: edma: Add function to manually trigger an EDMA channel dma: edma: Write out and handle MAX_NR_SG at a given time dma: edma: Setup parameters to DMA MAX_NR_SG at a time dmaengine: pl330: use dma_set_max_seg_size to set the sg limit dmaengine: dma_slave_caps: remove sg entries dma: replace devm_request_and_ioremap by devm_ioremap_resource dma: ste_dma40: Fix potential null pointer dereference dma: ste_dma40: Remove duplicate const dma: imx-dma: Remove redundant NULL check dma: dmagengine: fix function names in comments dma: add driver for R-Car HPB-DMAC dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap() dma: imx-sdma: Staticize sdma_driver_data structures pch_dma: Add MODULE_DEVICE_TABLE dmaengine: PL08x: Add cyclic transfer support dmaengine: PL08x: Fix reading the byte count in cctl dmaengine: PL08x: Add support for different maximum transfer size ...
| * dma: edma: Remove limits on number of slotsJoel Fernandes2013-09-041-6/+0
| | | | | | | | | | | | | | | | | | With this series, this check is no longer required and we shouldn't need to reject drivers DMA'ing more than the MAX number of slots. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: edma: Leave linked to Null slot instead of DUMMY slotJoel Fernandes2013-09-041-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dummy slot has been used as a way for missed-events not to be reported as missing. This has been particularly troublesome for cases where we might want to temporarily pause all incoming events. For EDMA DMAC, there is no way to do any such pausing of events as the occurence of the "next" event is not software controlled. Using "edma_pause" in IRQ handlers doesn't help as by then the event in concern from the slave is already missed. Linking a dummy slot, is seen to absorb these events which we didn't want to miss. So we don't link to dummy, but instead leave it linked to NULL set, allow an error condition and detect the channel that missed it. Consider the case where we have a scatter-list like: SG1->SG2->SG3->SG4->SG5->SG6->Null For ex, for a MAX_NR_SG of 2, earlier we were splitting this as: SG1->SG2->Null SG3->SG4->Null SG5->SG6->Null Now we split it as SG1->SG2->Null SG3->SG4->Null SG5->SG6->Dummy This approach results in lesser unwanted interrupts that occur for the last list split. The Dummy slot has the property of not raising an error condition if events are missed unlike the Null slot. We are OK with this as we're done with processing the whole list once we reach Dummy. Signed-off-by: Joel Fernandes <joelf@ti.com> [modifed duplicate s-o-b & patch title] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: edma: Find missed events and issue themJoel Fernandes2013-09-041-1/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In an effort to move to using Scatter gather lists of any size with EDMA as discussed at [1] instead of placing limitations on the driver, we work through the limitations of the EDMAC hardware to find missed events and issue them. The sequence of events that require this are: For the scenario where MAX slots for an EDMA channel is 3: SG1 -> SG2 -> SG3 -> SG4 -> SG5 -> SG6 -> Null The above SG list will have to be DMA'd in 2 sets: (1) SG1 -> SG2 -> SG3 -> Null (2) SG4 -> SG5 -> SG6 -> Null After (1) is succesfully transferred, the events from the MMC controller donot stop coming and are missed by the time we have setup the transfer for (2). So here, we catch the events missed as an error condition and issue them manually. In the second part of the patch, we make handle the NULL slot cases: For crypto IP, we continue to receive events even continuously in NULL slot, the setup of the next set of SG elements happens after the error handler executes. This is results in some recursion problems. Due to this, we continously receive error interrupts when we manually trigger an event from the error handler. We fix this, by first detecting if the Channel is currently transferring from a NULL slot or not, that's where the edma_read_slot in the error callback from interrupt handler comes in. With this we can determine if the set up of the next SG list has completed, and we manually trigger only in this case. If the setup has _not_ completed, we are still in NULL so we just set a missed flag and allow the manual triggerring to happen in edma_execute which will be eventually called. This fixes the above mentioned race conditions seen with the crypto drivers. [1] http://marc.info/?l=linux-omap&m=137416733628831&w=2 Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: edma: Write out and handle MAX_NR_SG at a given timeJoel Fernandes2013-09-041-26/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Process SG-elements in batches of MAX_NR_SG if they are greater than MAX_NR_SG. Due to this, at any given time only those many slots will be used in the given channel no matter how long the scatter list is. We keep track of how much has been written inorder to process the next batch of elements in the scatter-list and detect completion. For such intermediate transfer completions (one batch of MAX_NR_SG), make use of pause and resume functions instead of start and stop when such intermediate transfer is in progress or completed as we donot want to clear any pending events. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: edma: Setup parameters to DMA MAX_NR_SG at a timeJoel Fernandes2013-09-041-3/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes are made here for configuring existing parameters to support DMA'ing them out in batches as needed. Also allocate as many as slots as needed by the SG list, but not more than MAX_NR_SG. Then these slots will be reused accordingly. For ex, if MAX_NR_SG=10, and number of SG entries is 40, still only 10 slots will be allocated to DMA the entire SG list of size 40. Also enable TC interrupts for slots that are a last in a current iteration, or that fall on a MAX_NR_SG boundary. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * Merge branch 'topic/api_caps' into for-linusVinod Koul2013-09-041-7/+8
| |\
| | * dmaengine: pl330: use dma_set_max_seg_size to set the sg limitVinod Koul2013-09-031-7/+8
| | | | | | | | | | | | Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | Merge branch 'topic/sh' into for-linusVinod Koul2013-09-029-118/+232
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/dma/sh/Kconfig drivers/dma/sh/shdmac.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: fix a bad merge - remove free_irq()Guennadi Liakhovetski2013-08-271-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A bad merge resulted in a left-over free_irq() call. This patch removes it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | dma: sh: remove unnecessary platform_set_drvdata()Jingoo Han2013-08-272-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: add r8a73a4 DMAC data to the device ID tableGuennadi Liakhovetski2013-08-275-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This configuration data will be used, when DMAC DT support is added to r8a73a4. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: add a header with common for ARM SoCs definesGuennadi Liakhovetski2013-08-271-0/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All shdma DMACs on ARM SoCs share certain register layout patterns, which are currently defined in arch/arm/mach-shmobile/include/mach/dma-register.h. That header is included by SoC-specific setup-*.c files to be used in DMAC platform data. That header, however, cannot be directly used by the driver. This patch copies those defines into a driver-local header to be used by Device Tree configurations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: remove private and unused defines from a global headerGuennadi Liakhovetski2013-08-271-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Macros, named like TEND or SAR lack a namespace and are too broadly named for a global header. Besides, they aren't needed globally. Move them to where they belong - into the driver. Some other macros aren't used at all, remove them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: switch DT mode to use configuration data from a match tableGuennadi Liakhovetski2013-08-276-21/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This facilitates DMAC DT support by eliminating the need in AUXDATA and avoiding creating complex DT data. This also fits well with DMAC devices, of which SoCs often have multiple identical copies and it is perfectly valid to use a single configuration data set for all of them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: make a pointer constGuennadi Liakhovetski2013-08-272-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platform data shouldn't be changed at run-time, so, pointers to it should be const. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: sudmac: fix compiler warningGuennadi Liakhovetski2013-08-271-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following compiler warning: drivers/dma/sh/sudmac.c: In function 'sudmac_chan_remove': drivers/dma/sh/sudmac.c:302: warning: unused variable 'sc' Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: switch to managed resource allocationGuennadi Liakhovetski2013-08-273-63/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch shdma to using devm_* managed functions for allocation of memory, requesting IRQs, mapping IO resources etc. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: support the new CHCLR register layoutGuennadi Liakhovetski2013-08-271-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On newer r-car SoCs the CHCLR register only contains one bit per channel, to which a 1 has to be written to reset the channel. Older SoC versions had one CHCLR register per channel, to which a 0 must be written to reset the channel and clear its buffers. This patch adds support for the newer layout. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: switch all __iomem pointers to voidGuennadi Liakhovetski2013-08-252-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the shdma driver __iomem pointers are used to point to hardware registers. Using typed pointers like "u32 __iomem *" in this case is inconvenient, because then offsets, added to such pointers, have to be devided by sizeof(u32) or similar. Switch the driver to use void pointers, which avoids this clumsiness. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | DMA: shdma: fix CHCLR register address calculationGuennadi Liakhovetski2013-08-251-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct sh_dmae_device::chan_reg is a pointer to u32, therefore when adding offsets to it care should be taken to add offsets in sizeof(u32) units, not in bytes. This patch corrects such a bug. While at it we also remove the redundant parameter of the affected function. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | Merge branch 'topic/of' into for-linusVinod Koul2013-09-022-6/+7
| |\ \ \
| | * | | dma: of: make error message more meaningful by adding the node nameLothar Waßmann2013-08-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| | * | | dmaengine: fix - error: potential NULL dereference 'chan'Vinod Koul2013-08-191-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 7bb587f4 "dmaengine: add interface of dma_get_slave_channel" introduced the above error so fix it Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | Merge branch 'topic/api_caps' into for-linusVinod Koul2013-09-021-0/+27
| |\ \ \ \ | | | |_|/ | | |/| |
| | * | | dma: pl330: Implement device_slave_capsLars-Peter Clausen2013-07-151-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement the device_slave_caps() callback for the pl330 driver. This allows dmaengine users like the generic ALSA dmaengine PCM driver to query the capabilities of the driver. The PL330 supports all buswidths and both mem-to-dev as well as dev-to-mem transfers. In theory there is no limit on the number of segments that can be transferred (in practice you'll run out of memory eventually) and the number of bytes per segment is limited by the size of the PL330 program buffer. Due to the nature of the PL330 the maximum number of bytes per segment depends on the burstsize, the driver sets it to the value for a 1-byte burstsize, since it is the smallest. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: replace devm_request_and_ioremap by devm_ioremap_resourceJulia Lawall2013-09-021-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_ioremap_resource instead of devm_request_and_ioremap. This was done using the semantic patch scripts/coccinelle/api/devm_ioremap_resource.cocci The relevant call to platform_get_resource was manually moved down to the call to devm_ioremap_resource. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: ste_dma40: Fix potential null pointer dereferenceSachin Kamat2013-09-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kcalloc can return NULL. Check the pointer before dereferencing. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: ste_dma40: Remove duplicate constSachin Kamat2013-09-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'const' was added twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: imx-dma: Remove redundant NULL checkSachin Kamat2013-09-021-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kfree on a NULL pointer is a no-op. Null pointer check is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: dmagengine: fix function names in commentsDaniel Mack2013-09-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial fix for function name mismatches I stumbled over. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: add driver for R-Car HPB-DMACMax Filippov2013-09-023-0/+662
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for HPB-DMAC found in Renesas R-Car SoCs, using 'shdma-base' DMA driver framework. Based on the original patch by Phil Edworthy <phil.edworthy@renesas.com>. Signed-off-by: Max Filippov <max.filippov@cogentembedded.com> [Sergei: removed useless #include, sorted #include's, fixed HPB_DMA_TCR_MAX, fixed formats and removed line breaks in the dev_dbg() calls, rephrased and added IRQ # to the shdma_request_irq() failure message, added MODULE_AUTHOR(), removed '__init'/'__exit' annotations from the probe()/remove() methods, removed '__initdata' annotation from 'hpb_dmae_driver', fixed guard macro name in the header file, fixed #define ASYNCRSTR_ASRST20, added #define ASYNCRSTR_ASRST24, added the necessary runtime PM calls to the probe() and remove() methods, handled errors returned by dma_async_device_register(), beautified comments and #define's.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap()Jingoo Han2013-09-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_ioremap_resource() because devm_request_and_ioremap() is obsoleted by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dma: imx-sdma: Staticize sdma_driver_data structuresFabio Estevam2013-09-021-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sparse report the following warnings: drivers/dma/imx-sdma.c:330:25: warning: symbol 'sdma_imx31' was not declared. Should it be static? drivers/dma/imx-sdma.c:351:25: warning: symbol 'sdma_imx25' was not declared. Should it be static? drivers/dma/imx-sdma.c:357:25: warning: symbol 'sdma_imx35' was not declared. Should it be static? drivers/dma/imx-sdma.c:375:25: warning: symbol 'sdma_imx51' was not declared. Should it be static? drivers/dma/imx-sdma.c:395:25: warning: symbol 'sdma_imx53' was not declared. Should it be static? drivers/dma/imx-sdma.c:414:25: warning: symbol 'sdma_imx6q' was not declared. Should it be static? Make the sdma_driver_data structures static. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | pch_dma: Add MODULE_DEVICE_TABLEBen Hutchings2013-09-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pch_dma currently isn't auto-loaded if built as a module. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dmaengine: PL08x: Add cyclic transfer supportAlban Bedel2013-09-021-29/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many audio interface drivers require support of cyclic transfers to work correctly, for example Samsung ASoC DMA driver. This patch adds support for cyclic transfers to the amba-pl08x driver. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> [tfiga: Rebase and slightly beautify the original patch.] Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dmaengine: PL08x: Fix reading the byte count in cctlAlban Bedel2013-09-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are more fields than just SWIDTH in CH_CONTROL register, so read register value must be masked in addition to shifting. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dmaengine: PL08x: Add support for different maximum transfer sizeTomasz Figa2013-09-021-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PL080S has separate register to store transfer size in, allowing single transfer to be much larger than in standard PL080. This patch makes the amba-pl08x driver aware of this and removes writing transfer size to reserved bits of CH_CONTROL register on PL080S, which was not a problem witn transfer sizes fitting the original bitfield of PL080, but now would overwrite other fields. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dmaengine: PL08x: Add support for PL080S variantTomasz Figa2013-09-021-27/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PL080S is a modified version of PL080 that can be found on Samsung SoCs, such as S3C6400 and S3C6410. It has different offset of CONFIG register, separate CONTROL1 register that holds transfer size and larger maximum transfer size. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dmaengine: PL08x: Move LLI dumping code into separate functionTomasz Figa2013-09-021-17/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactors debugging code that dumps LLI entries by moving it into separate function, which is stubbed when VERBOSE_DEBUG is not selected. This allows us to get rid of the ugly ifdef from the body of pl08x_fill_llis_for_desc(). No functional change is introduced by this patch. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | | dmaengine: PL08x: Rework LLI handling to be less fragileTomasz Figa2013-09-021-65/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently memory allocated for LLIs is casted to an array of structs, which is fragile and also limits the driver to a single, predefined LLI layout, while there are some variants of PL08x, which have more fields in LLI (namely PL080S with its extra CCTL2). This patch makes LLIs a sequence of 32-bit words, which is just filled with appropriate values in appropriate order and padded with required amount of dummy words (currently zero, but PL080S will make better use of this). Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
OpenPOWER on IntegriCloud