summaryrefslogtreecommitdiffstats
path: root/drivers/dma/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver supportPeter Griffin2016-10-181-0/+1
| | | | | | | | | | | | | This patch adds support for the Flexible Direct Memory Access (FDMA) core driver. The FDMA is a slim core CPU with a dedicated firmware. It is a general purpose DMA controller capable of supporting 16 independent DMA channels. Data moves maybe from memory to memory or between memory and paced latency critical real time targets and it is found on al STi based chipsets. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: mv_xor_v2: new driverThomas Petazzoni2016-07-121-0/+1
| | | | | | | | | | | The new mv_xor_v2 driver supports the XOR engines found in the 64-bits ARM from Marvell of the Armada 7K and Armada 8K family. This XOR engine is a completely new hardware block, entirely different from the one used on previous Marvell Armada platforms, which use the existing mv_xor driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: tegra-adma: Add support for Tegra210 ADMAJon Hunter2016-05-131-0/+1
| | | | | | | | | | | | Add support for the Tegra210 Audio DMA controller that is used for transferring data between system memory and the Audio sub-system. The driver only supports cyclic transfers because this is being solely used for audio. This driver is based upon the work by Dara Ramesh <dramesh@nvidia.com>. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: qcom_bam_dma: move to qcom directorySinan Kaya2016-03-111-1/+1
| | | | | | | | Creating a QCOM directory for all QCOM DMA source files. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: Add STM32 DMA driverM'boumba Cedric Madianga2015-11-161-0/+1
| | | | | | | This patch adds support for the STM32 DMA controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: idma: rename to INTEL_IDMA64Vinod Koul2015-09-241-1/+1
| | | | | | | | | | the symbol CONFIG_IDMA64 should rather be CONFIG_INTEL_IDMA64 to conform to rest of the intel dmaengine drivers. This was found after sorting the entries and trying to place this odd one Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-09-041-39/+49
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This time we have aded a new capability for scatter-gathered memset using dmaengine APIs. This is supported in xdmac & hdmac drivers We have added support for reusing descriptors for examples like video buffers etc. Driver will follow The behaviour of descriptor ack has been clarified and documented New devices added are: - dma controller in sun[457]i SoCs - lpc18xx dmamux - ZTE ZX296702 dma controller - Analog Devices AXI-DMAC DMA controller - eDMA support for dma-crossbar - imx6sx support in imx-sdma driver - imx-sdma device to device support Other: - jz4780 fixes - ioatdma large refactor and cleanup for removal of ioat v1 and v2 which is deprecated and fixes - ACPI support in X-Gene DMA engine driver - ipu irq fixes - mvxor fixes - minor fixes spread thru drivers" [ The Kconfig and Makefile entries got re-sorted alphabetically, and I handled the conflict with the new Intel integrated IDMA driver by slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in order to keep the Intel entries together. I think it might be a good idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make the sorting be a true sort, not this mismash. Also, this merge disables the COMPILE_TEST for the sun4i DMA controller, because it does not compile cleanly at all. - Linus ] * tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs dmaengine :ipu: change ipu_irq_handler() to remove compile warning dmaengine: ioatdma: Fix variable array length dmaengine: ioatdma: fix sparse "error" with prep lock dmaengine: hdmac: Add memset capabilities dmaengine: sort the sh Makefile dmaengine: sort the sh Kconfig dmaengine: sort the dw Kconfig dmaengine: sort the Kconfig dmaengine: sort the makefile drivers/dma: make mv_xor.c driver explicitly non-modular dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller devicetree: Add bindings documentation for Analog Devices AXI-DMAC dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests dmaengine: ioatdma: fix coccinelle warning dmaengine: ioatdma: fix zero day warning on incompatible pointer type dmaengine: tegra-apb: Simplify locking for device using global pause dmaengine: tegra-apb: Remove unnecessary return statements and variables dmaengine: tegra-apb: Avoid unnecessary channel base address calculation dmaengine: tegra-apb: Remove unused variables ...
| * dmaengine: sort the makefileVinod Koul2015-08-241-41/+47
| | | | | | | | | | | | | | | | dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: Add support for the Analog Devices AXI-DMAC DMA controllerLars-Peter Clausen2015-08-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Analog Devices AXI-DMAC DMA controller. This controller is a soft peripheral that can be instantiated in a FPGA and is often used in Analog Devices' reference designs for FPGA platforms. The peripheral has various configuration options that can be selected at synthesis time and influence the supported features of the instantiated peripheral, those options are represented as device-tree properties to allow the driver to behave accordingly. The peripheral has a zero latency architecture, which means it is possible to switch from one to the next descriptor without any delay. This is archived by having a internal queue which can hold multiple descriptors. The driver supports this, which means it will submit new descriptors directly to the hardware until the queue is full and not wait for a descriptor to complete before the next one is submitted. Interrupts are used for the descriptor queue flow control. Currently the driver supports SG, cyclic and interleaved slave DMA. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * Merge branch 'topic/zxdma' into for-linusVinod Koul2015-08-231-0/+1
| |\
| | * dmaengine: zxdma: Support ZTE ZX296702 dmaJun Nie2015-07-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add ZTE ZX296702 dma controller support. Only device tree probe is support currently. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | dmaengine: sun4i: Add support for the DMA engine on sun[457]i SoCsEmilio López2015-08-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the DMA engine present on Allwinner A10, A13, A10S and A20 SoCs. This engine has two kinds of channels: normal and dedicated. The main difference is in the mode of operation; while a single normal channel may be operating at any given time, dedicated channels may operate simultaneously provided there is no overlap of source or destination. Hardware documentation can be found on A10 User Manual (section 12), A13 User Manual (section 14) and A20 User Manual (section 1.12) Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | dmaengine: add driver for lpc18xx dmamuxJoachim Eastwood2015-08-181-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | Add support for DMA on NXP LPC18xx/43xx platforms which has a multiplexer in front of the PL080 dma request lines. The mux is a single register in the LPC18xx/43xx CREG block and can multiplex up to 4 request lines to each of the 16 lines on the PL080. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: add a driver for Intel integrated DMA 64-bitAndy Shevchenko2015-07-281-0/+1
|/ | | | | | | | | | | | | | | | | | Intel integrated DMA (iDMA) 64-bit is a specific IP that is used as a part of LPSS devices such as HSUART or SPI. The iDMA IP is attached for private usage on each host controller independently. While it has similarities with Synopsys DesignWare DMA, the following distinctions doesn't allow to use the existing driver: - 64-bit mode with corresponding changes in Hardware Linked List data structure - many slight differences in the channel registers Moreover this driver is based on the DMA virtual channels framework that helps to make the driver cleaner and easy to understand. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* Merge branch 'topic/pxa' into for-linusVinod Koul2015-06-251-0/+1
|\
| * dmaengine: pxa: add pxa dmaengine driverRobert Jarzmik2015-05-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: Add driver for TI DMA crossbar on DRA7xPeter Ujfalusi2015-05-141-0/+1
|/ | | | | | | | | | The DRA7x has more peripherals with DMA requests than the sDMA can handle: 205 vs 127. All DMA requests are routed through the DMA crossbar, which can be configured to route selected incoming DMA requests to specific sDMA request. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-04-241-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
| * dmaengine: Driver support for FSL RaidEngine device.Xuelin Shi2015-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | The RaidEngine is a new FSL hardware used for Raid5/6 acceration. This patch enables the RaidEngine functionality and provides hardware offloading capability for memcpy, xor and pq computation. It works with async_tx. Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: Add support for APM X-Gene SoC DMA engine driverRameshwar Prasad Sahu2015-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch implements the APM X-Gene SoC DMA engine driver. The APM X-Gene SoC DMA engine consists of 4 DMA channels for performing DMA operations. These DMA operations include memory copy, scatter-gather memory copy, raid5 xor, and raid6 p+q offloading. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controllerAlex Smith2015-04-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for the DMA controller found in the Ingenic JZ4780. It currently does not implement any support for the programmable firmware feature of the controller - this is not necessary for most uses. It also does not take priority into account when allocating channels, it just allocates the first available channel. This can be implemented later. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> [Updated for dmaengine api changes, Add residue support, couple of minor fixes] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | Merge tag 'tty-4.1-rc1' of ↵Linus Torvalds2015-04-211-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver update for 4.1-rc1. It was delayed for a bit due to some questions surrounding some of the console command line parsing changes that are in here. There's still one tiny regression for people who were previously putting multiple console command lines and expecting them all to be ignored for some odd reason, but Peter is working on fixing that. If not, I'll send a revert for the offending patch, but I have faith that Peter can address it. Other than the console work here, there's the usual serial driver updates and changes, and a buch of 8250 reworks to try to make that driver easier to maintain over time, and have it support more devices in the future. All of these have been in linux-next for a while" * tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits) n_gsm: Drop unneeded cast on netdev_priv sc16is7xx: expose RTS inversion in RS-485 mode serial: 8250_pci: port failed after wakeup from S3 earlycon: 8250: Document kernel command line options earlycon: 8250: Fix command line regression earlycon: Fix __earlycon_table stride tty: clean up the tty time logic a bit serial: 8250_dw: only get the clock rate in one place serial: 8250_dw: remove useless ACPI ID check dmaengine: hsu: move memory allocation to GFP_NOWAIT dmaengine: hsu: remove redundant pieces of code serial: 8250_pci: add Intel Tangier support dmaengine: hsu: add Intel Tangier PCI ID serial: 8250_pci: replace switch-case by formula for Intel MID serial: 8250_pci: replace switch-case by formula tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1 serial: jsm: some off by one bugs serial: xuartps: Fix check in console_setup(). serial: xuartps: Get rid of register access macros. serial: xuartps: Fix iobase use. ...
| * | dmaengine: append hsu DMA driverAndy Shevchenko2015-03-071-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The HSU DMA is developed to support High Speed UART controllers found in particular on Intel MID platforms such as Intel Medfield. The existing implementation is tighten to the drivers/tty/serial/mfd.c driver and has a lot of disadvantages. Besides that we would like to get rid of the old HS UART driver in regarding to extending the 8250 which supports generic DMAEngine API. That's why the current driver has been developed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | dmaengine: intel-mid-dma: remove the driverAndy Shevchenko2015-03-171-1/+0
|/ | | | | | | | | | | | Since the last and the only user of this driver is converted to use dw_dmac we can remove driver from the tree. Moreover, besides the driver is unmaintained a long time, it serves for the DesignWare DMA IP, for which we have already driver in the tree. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* dmaengine: Add driver for IMG MDCAndrew Bresticker2015-02-041-0/+1
| | | | | | | | | | Add support for the IMG Multi-threaded DMA Controller (MDC) found on certain IMG SoCs. Currently this driver supports the variant present on the MIPS-based Pistachio SoC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: rcar-dmac: Add Renesas R-Car Gen2 DMA Controller (DMAC) driverLaurent Pinchart2014-12-231-1/+1
| | | | | | | | | | | | | | | | The DMAC is a general purpose multi-channel DMA controller that supports both slave and memcpy transfers. The driver currently supports the DMAC found in the r8a7790 and r8a7791 SoCs. Support for compatible DMA controllers (such as the audio DMAC) will be added later. Feature-wise, automatic hardware handling of descriptors chains isn't supported yet. LPAE support is implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
* dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driverLudovic Desroches2014-11-061-0/+1
| | | | | | | | | New atmel DMA controller known as XDMAC, introduced with SAMA5D4 devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge tag 'dmaengine-3.17' of ↵Linus Torvalds2014-10-071-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine Pull dmaengine updates from Dan Williams: "Even though this has fixes marked for -stable, given the size and the needed conflict resolutions this is 3.18-rc1/merge-window material. These patches have been languishing in my tree for a long while. The fact that I do not have the time to do proper/prompt maintenance of this tree is a primary factor in the decision to step down as dmaengine maintainer. That and the fact that the bulk of drivers/dma/ activity is going through Vinod these days. The net_dma removal has not been in -next. It has developed simple conflicts against mainline and net-next (for-3.18). Continuing thanks to Vinod for staying on top of drivers/dma/. Summary: 1/ Step down as dmaengine maintainer see commit 08223d80df38 "dmaengine maintainer update" 2/ Removal of net_dma, as it has been marked 'broken' since 3.13 (commit 77873803363c "net_dma: mark broken"), without reports of performance regression. 3/ Miscellaneous fixes" * tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine: net: make tcp_cleanup_rbuf private net_dma: revert 'copied_early' net_dma: simple removal dmaengine maintainer update dmatest: prevent memory leakage on error path in thread ioat: Use time_before_jiffies() dmaengine: fix xor sources continuation dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup() dma: mv_xor: Remove all callers of mv_xor_slot_cleanup() dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call ioat: Use pci_enable_msix_exact() instead of pci_enable_msix() drivers: dma: Include appropriate header file in dca.c drivers: dma: Mark functions as static in dma_v3.c dma: mv_xor: Add DMA API error checks ioat/dca: Use dev_is_pci() to check whether it is pci device
| * net_dma: simple removalDan Williams2014-09-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per commit "77873803363c net_dma: mark broken" net_dma is no longer used and there is no plan to fix it. This is the mechanical removal of bits in CONFIG_NET_DMA ifdef guards. Reverting the remainder of the net_dma induced changes is deferred to subsequent patches. Marked for stable due to Roman's report of a memory leak in dma_pin_iovec_pages(): https://lkml.org/lkml/2014/9/3/177 Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: David Whipple <whipple@securedatainnovations.ch> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: <stable@vger.kernel.org> Reported-by: Roman Gushchin <klamm@yandex-team.ru> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* | Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2014-08-111-2/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dma updates from Vinod Koul: "Some notable changes are: - new driver for AMBA AXI NBPF by Guennadi - new driver for sun6i controller by Maxime - pl330 drivers fixes from Lar's - sh-dma updates and fixes from Laurent, Geert and Kuninori - Documentation updates from Geert - drivers fixes and updates spread over dw, edma, freescale, mpc512x etc.." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits) dmaengine: sun6i: depends on RESET_CONTROLLER dma: at_hdmac: fix invalid remaining bytes detection dmaengine: nbpfaxi: don't build this driver where it cannot be used dmaengine: nbpf_error_get_channel() can be static dma: pl08x: Use correct specifier for size_t values dmaengine: Remove the context argument to the prep_dma_cyclic operation dmaengine: nbpfaxi: convert to tasklet dmaengine: nbpfaxi: fix a theoretical race dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores dmaengine: add device tree binding documentation for the nbpfaxi driver dmaengine: edma: Do not register second device when booted with DT dmaengine: edma: Do not change the error code returned from edma_alloc_slot dmaengine: rcar-dmac: Add device tree bindings documentation dmaengine: shdma: Allocate cyclic sg list dynamically dmaengine: shdma: Make channel filter ignore unrelated devices dmaengine: sh: Rework Kconfig and Makefile dmaengine: sun6i: Fix memory leaks dmaengine: sun6i: Free the interrupt before killing the tasklet dmaengine: sun6i: Remove switch statement from buswidth convertion routine dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected ...
| * | dmaengine: add a driver for AMBA AXI NBPF DMAC IP coresGuennadi Liakhovetski2014-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for NBPF DMAC IP cores from Renesas, designed for the AMBA AXI bus. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | dmaengine: sun6i: Add driver for the Allwinner A31 DMA controllerMaxime Ripard2014-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Allwinner A31 has a 16 channels DMA controller that it shares with the newer A23. Although sharing some similarities with the DMA controller of the older Allwinner SoCs, it's significantly different, I don't expect it to be possible to share the driver for these two. The A31 Controller is able to memory-to-memory or memory-to-device transfers on the 16 channels in parallel. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | dmaengine: inherit debug settings from the subsystem for subdirectoriesWolfram Sang2014-07-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | To be able to see debug messages during boot, enable the debug settings from Kconfig also for drivers in subdirectories. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | | dma: MIC X100 DMA DriverSiva Yerramreddy2014-07-121-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements DMA Engine API for DMA controller on MIC X100 Coprocessors. DMA h/w is shared between host and card s/w. Channels 0 to 3 are used by host and 4 to 7 are used by card. Since the DMA device doesn't show up as PCIe device, a virtual bus called mic bus is created and virtual devices are added on that bus to follow device model. Allowed dma transfer directions are host to card, card to host and card to card. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Siva Yerramreddy <yshivakrishna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | dma: Add Xilinx AXI Video Direct Memory Access Engine driver supportSrikanth Thokala2014-04-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the driver for the AXI Video Direct Memory Access (AXI VDMA) core, which is a soft Xilinx IP core that provides high- bandwidth direct memory access between memory and AXI4-Stream type video target peripherals. The core provides efficient two dimensional DMA operations with independent asynchronous read and write channel operation. This module works on Zynq (ARM Based SoC) and Microblaze platforms. Signed-off-by: Srikanth Thokala <sthokal@xilinx.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Reviewed-by: Levente Kurusa <levex@linux.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | dmaengine: add Qualcomm BAM dma driverAndy Gross2014-04-051-0/+2
|/ | | | | | | | | | | | | | | | | Add the DMA engine driver for the QCOM Bus Access Manager (BAM) DMA controller found in the MSM 8x74 platforms. Each BAM DMA device is associated with a specific on-chip peripheral. Each channel provides a uni-directional data transfer engine that is capable of transferring data between the peripheral and system memory (System mode), or between two peripherals (BAM2BAM). The initial release of this driver only supports slave transfers between peripherals and system memory. Signed-off-by: Andy Gross <agross@codeaurora.org> Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: Add MOXA ART DMA engine driverJonas Jensen2014-01-201-0/+1
| | | | | | | | | | | | The MOXA ART SoC has a DMA controller capable of offloading expensive memory operations, such as large copies. This patch adds support for the controller including four channels. Two of these are used to handle MMC copy on the UC-7112-LX hardware. The remaining two can be used in a future audio driver or client application. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: Add support for BCM2835Florian Meier2014-01-071-0/+1
| | | | | | | | | | Add support for DMA controller of BCM2835 as used in the Raspberry Pi. Currently it only supports cyclic DMA. Signed-off-by: Florian Meier <florian.meier@koalo.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dmaengine: add driver for Samsung s3c24xx SoCsHeiko Stuebner2013-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This adds a new driver to support the s3c24xx dma using the dmaengine and makes the old one in mach-s3c24xx obsolete in the long run. Conceptually the s3c24xx-dma feels like a distant relative of the pl08x with numerous virtual channels being mapped to a lot less physical ones. The driver therefore borrows a lot from the amba-pl08x driver in this regard. Functionality-wise the driver gains a memcpy ability in addition to the slave_sg one. The driver supports both the method for requesting the peripheral used by SoCs before the S3C2443 and the different method for S3C2443 and later. On earlier SoCs the hardware channels usable for specific peripherals is constrainted while on later SoCs all channels can be used for any peripheral. Tested on a s3c2416-based board, memcpy using the dmatest module and slave_sg partially using the spi-s3c64xx driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2013-09-101-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine updates from Vinod Koul: "This pull brings: - Andy's DW driver updates - Guennadi's sh driver updates - Pl08x driver fixes from Tomasz & Alban - Improvements to mmp_pdma by Daniel - TI EDMA fixes by Joel - New drivers: - Hisilicon k3dma driver - Renesas rcar dma driver - New API for publishing slave driver capablities - Various fixes across the subsystem by Andy, Jingoo, Sachin etc..." * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits) dma: edma: Remove limits on number of slots dma: edma: Leave linked to Null slot instead of DUMMY slot dma: edma: Find missed events and issue them ARM: edma: Add function to manually trigger an EDMA channel dma: edma: Write out and handle MAX_NR_SG at a given time dma: edma: Setup parameters to DMA MAX_NR_SG at a time dmaengine: pl330: use dma_set_max_seg_size to set the sg limit dmaengine: dma_slave_caps: remove sg entries dma: replace devm_request_and_ioremap by devm_ioremap_resource dma: ste_dma40: Fix potential null pointer dereference dma: ste_dma40: Remove duplicate const dma: imx-dma: Remove redundant NULL check dma: dmagengine: fix function names in comments dma: add driver for R-Car HPB-DMAC dma: k3dma: use devm_ioremap_resource() instead of devm_request_and_ioremap() dma: imx-sdma: Staticize sdma_driver_data structures pch_dma: Add MODULE_DEVICE_TABLE dmaengine: PL08x: Add cyclic transfer support dmaengine: PL08x: Fix reading the byte count in cctl dmaengine: PL08x: Add support for different maximum transfer size ...
| * dmaengine: Add hisilicon k3 DMA engine driverZhangfei Gao2013-08-281-0/+1
| | | | | | | | | | | | | | | | | | Add dmaengine driver for hisilicon k3 platform based on virt_dma Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Tested-by: Kai Yang <jean.yangkai@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | usb: musb dma: add cppi41 dma driverSebastian Andrzej Siewior2013-08-091-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* dma: Add a jz4740 dmaengine driverLars-Peter Clausen2013-07-051-0/+1
| | | | | | | | | | | This patch adds dmaengine support for the JZ4740 DMA controller. For now the driver will be a wrapper around the custom JZ4740 DMA API. Once all users of the custom JZ4740 DMA API have been converted to the dmaengine API the custom API will be removed and direct hardware access will be added to the dmaengine driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dma: dw: split driver to library part and platform codeAndy Shevchenko2013-07-051-1/+1
| | | | | | | | | | | To simplify the driver development let's split driver to library and platform code parts. It helps us to add PCI driver in future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [Fixed compile error and few checkpatch issues] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dma: move dw_dmac driver to an own directoryAndy Shevchenko2013-07-051-1/+1
| | | | | | | | | | The dw_dmac driver is going to be split into multiple files. To make this more convenient move it to an own directory. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dma: sh: add KconfigShimoda, Yoshihiro2013-04-301-1/+1
| | | | | | | | | | | This patch adds Kconfig in the drivers/dma/sh. This patch also adds a new config "SH_DMAE_BASE" and the "config SH_DMAE" depends on it. Since some drivers (e.g. sh_mmcif.c) depends on shdma-base.c if CONFIG_DMA_ENGINE=y, the "config SH_DMAE_BASE" is set as "bool". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* dma: acpi-dma: introduce ACPI DMA helpersAndy Shevchenko2013-04-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a new generic API to get a DMA channel for a slave device (commit 9a6cecc8 "dmaengine: add helper function to request a slave DMA channel"). In similar fashion to the DT case (commit aa3da644 "of: Add generic device tree DMA helpers") we introduce helpers to the DMAC drivers which are enumerated by ACPI. The proposed extension provides the following API calls: acpi_dma_controller_register(), devm_acpi_dma_controller_register() acpi_dma_controller_free(), devm_acpi_dma_controller_free() acpi_dma_simple_xlate() acpi_dma_request_slave_chan_by_index() acpi_dma_request_slave_chan_by_name() The first two should be used, for example, at probe() and remove() of the corresponding DMAC driver. At the register stage the DMAC driver supplies a custom xlate() function to translate a struct dma_spec into struct dma_chan. Accordingly to the ACPI Fixed DMA resource specification the only two pieces of information the slave device has are the channel id and the request line (slave id). Those two are represented by struct dma_spec. The acpi_dma_request_slave_chan_by_index() provides access to the specifix FixedDMA resource by its index. Whereas dma_request_slave_channel() takes a string parameter to identify the DMA resources required by the slave device. To make a slave device driver work with both DeviceTree and ACPI enumeration a simple convention is established: "tx" corresponds to the index 0 and "rx" to the index 1. In case of robust configuration the slave device driver unfortunately needs to call acpi_dma_request_slave_chan_by_index() directly. Additionally the patch provides "managed" version of the register/free pair i.e. devm_acpi_dma_controller_register() and devm_acpi_dma_controller_free(). Usually, the driver uses only devm_acpi_dma_controller_register(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2013-02-261-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
| * dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.cVinod Koul2013-02-131-0/+2
| | | | | | | | | | | | | | as requested by Rob Suggested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dmaPhilippe De Muyter2013-01-031-0/+1
|/ | | | | | | | | | | | | | | The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Anatolij Gustschin <agust@denx.de>
OpenPOWER on IntegriCloud