summaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm
Commit message (Collapse)AuthorAgeFilesLines
* TPM: fix suspend and resume failureDavid Smith2008-01-141-6/+6
| | | | | | | | | | | | | The savestate command structure was being overwritten by the result of running the TPM_SaveState command after one run, so make it a local variable to the function instead of a global variable that gets overwritten. Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Kent Yoder <shpedoikal@gmail.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* TPM: fix TIS device driver locality requestMarcel Selhorst2007-11-291-5/+5
| | | | | | | | | | | | | | | | | | | | During the initialization of the TPM TIS driver, the necessary locality has to be requested earlier in the init-process. Depending on the used TPM chip, this leads to wrong information. For example: Lenovo X61s with Atmel TPM: tpm_tis 00:0a: 1.2 TPM (device-id 0xFFFF, rev-id 255) But correct is: tpm_tis 00:0c: 1.2 TPM (device-id 0x3203, rev-id 9) This short patch fixes this issue. Signed-off-by: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Eliminate pointless casts from void* in a few driver irq handlers.Jeff Garzik2007-10-231-2/+2
| | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* tpm: pay attention to IRQ info from PNPBjorn Helgaas2007-10-171-9/+13
| | | | | | | | | | | | If we discover the TIS TPM device via PNP, use the PNP IRQ information rather than probing for an IRQ. If PNP shows no IRQ, run the TPM in polling mode. Tested-by: <valdis.kletnieks@vt.edu> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tpmdd maintainersKent Yoder2007-08-227-5/+9
| | | | | | | | | | | Fix up the maintainers info in the tpm drivers. Kylene will be out for some time, so copying the sourceforge list is the best way to get some attention. Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix memory leak in tpm_binary_bios_measurements_open()Reiner Sailer2007-07-201-3/+8
| | | | | | | | | | | The same problem that was fixed for tpm_ascii_bios_measurements_open() in commit 178554ae75739e91dc4d7c3e42a3db95448cc5bf also occurs in tpm_binary_bios measurements(). Thanks for noticing this Satyam! I tested the attached patch to fix tpm_binary_bios_measurments as well. Signed-off-by: Reiner Sailer <sailer@watson.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Memory leak in tpm_ascii_bios_measurements_open()Jesper Juhl2007-07-201-3/+8
| | | | | | | | | | | | | | | Coverity found a memory leak in tpm_ascii_bios_measurements_open(). If "read_log(log)" fails, then we may leak 'log' and 'log->bios_event_log'. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: Seiji Munetoh <munetoh@jp.ibm.com> Cc: Stefan Berger <stefanb@us.ibm.com> Cc: Reiner Sailer <sailer@watson.ibm.com> Cc: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use menuconfig objects II - TPMJan Engelhardt2007-07-161-10/+8
| | | | | | | | | | | | Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Missing include file in tpm_atmel.hStephen Rothwell2007-05-121-0/+3
| | | | | | | | On PPC64, we need to include asm/prom.h for function definitions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky2007-05-101-0/+1
| | | | | | | Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Fix trivial typos in Kconfig* filesDavid Sterba2007-05-091-1/+1
| | | | | | | Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* Merge branch 'master' of ↵Linus Torvalds2007-05-081-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (77 commits) [POWERPC] Abolish powerpc_flash_init() [POWERPC] Early serial debug support for PPC44x [POWERPC] Support for the Ebony 440GP reference board in arch/powerpc [POWERPC] Add device tree for Ebony [POWERPC] Add powerpc/platforms/44x, disable platforms/4xx for now [POWERPC] MPIC U3/U4 MSI backend [POWERPC] MPIC MSI allocator [POWERPC] Enable MSI mappings for MPIC [POWERPC] Tell Phyp we support MSI [POWERPC] RTAS MSI implementation [POWERPC] PowerPC MSI infrastructure [POWERPC] Rip out the existing powerpc msi stubs [POWERPC] Remove use of 4level-fixup.h for ppc32 [POWERPC] Add powerpc PCI-E reset API implementation [POWERPC] Holly bootwrapper [POWERPC] Holly DTS [POWERPC] Holly defconfig [POWERPC] Add support for 750CL Holly board [POWERPC] Generalize tsi108 PCI setup [POWERPC] Generalize tsi108 PHY types ... Fixed conflict in include/asm-powerpc/kdebug.h manually Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * Merge branch 'linux-2.6'Paul Mackerras2007-05-081-1/+0
| |\
| * | [POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell2007-05-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Rename get_property to of_get_property: driversStephen Rothwell2007-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | These are all the remaining instances of get_property. Simple rename of get_property to of_get_property. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | | use mutex instead of semaphore in TPM driverMatthias Kaehlcke2007-05-082-13/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TPM driver uses two semaphores as mutexes. Use the mutex API instead of the (binary) semaphores. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | tpm: fix sleep-in-spinlockParag Warudkar2007-05-081-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | flush_scheduled_work() can sleep, and we're calling it under spinlock. AFAICS, moving flush_scheduled_work before spin_lock() should not cause any problems. Reason being - The only thing that can race against tpm_release is tpm_open (tpm_release is called when last reference to the file is closed and only thing that can happen after that is tpm_open??) and tpm_open acquires driver_lock and more over it bails out with EBUSY if chip->num_opens is greater than 0. I also moved chip->num_pending-- to after deleting timer and setting data pending as it looks more correct for the paranoid although it probably doesn't matter as it is guarded by driver_lock. None the less this change should not cause problems. While I was at it I noticed a missing NULL check in tpm_register_hardware which is fixed with this patch as well. Signed-off-by: Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | tpm_infineon: add support for devices in mmio spaceAlex Williamson2007-05-081-66/+165
| |/ |/| | | | | | | | | | | | | | | | | | | tAdd adds support for devices living in MMIO space to the Infineon TPM driver. These can be found on some of the newer HP ia64 systems. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Acked-by: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | PCI: Cleanup the includes of <linux/pci.h>Jean Delvare2007-05-021-1/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "[POWERPC] Rename get_property to of_get_property: drivers"Paul Mackerras2007-04-261-1/+1
| | | | | | This reverts commit d05c7a80cf39ae7d0f8d0c3e47c93d51fcd393d3, which included changes which should go via other subsystem maintainers.
* [POWERPC] Rename get_property to of_get_property: driversStephen Rothwell2007-04-131-1/+1
| | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename prom_n_size_cells to of_n_size_cellsStephen Rothwell2007-04-131-1/+1
| | | | | | | This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename prom_n_addr_cells to of_n_addr_cellsStephen Rothwell2007-04-131-1/+1
| | | | | | | This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] mark struct file_operations const 3Arjan van de Ven2007-02-121-2/+2
| | | | | | | | | | | Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Char: timers cleanupJiri Slaby2007-02-121-3/+2
| | | | | | | | | | | | | | | | | | | | | - Use timer macros to set function and data members and to modify expiration time. - Use DEFINE_TIMER for global timers and do not init them at run-time in these cases. - del_timer_sync is common in most cases -- we want to wait for timer function if it's still running. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Acked-by: Dmitry Torokhov <dtor@mail.ru> (Input bits) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ACPICA: Remove duplicate table definitions (non-conflicting), contAlexey Starikovskiy2007-02-021-5/+3
| | | | Signed-off-by: Len Brown <len.brown@intel.com>
* [PATCH] Correct misc_register return code handling in several driversNeil Horman2006-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Clean up several code points in which the return code from misc_register is not handled properly. Several modules failed to deregister various hooks when misc_register fails, and this patch cleans them up. Also there are a few modules that legitimately don't care about the failure status of misc register. These drivers however unilaterally call misc_deregister on module unload. Since misc_register doesn't initialize the list_head in the init_routine if it fails, the deregister operation is at risk for oopsing when list_del is called. The initial solution was to manually init the list in the miscdev structure in each of those modules, but the consensus in this thread was to consolodate and do that universally inside misc_register. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'master' of ↵David Howells2006-12-051-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
| * [PATCH] severing fs.h, radix-tree.h -> sched.hAl Viro2006-12-041-0/+1
| | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'master' of ↵David Howells2006-12-051-1/+1
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/infiniband/core/iwcm.c drivers/net/chelsio/cxgb2.c drivers/net/wireless/bcm43xx/bcm43xx_main.c drivers/net/wireless/prism54/islpci_eth.c drivers/usb/core/hub.h drivers/usb/input/hid-core.c net/core/netpoll.c Fix up merge failures with Linus's head and fix new compilation failures. Signed-Off-By: David Howells <dhowells@redhat.com>
| * Driver core: change misc class_devices to be real devicesGreg Kroah-Hartman2006-12-011-1/+1
| | | | | | | | | | | | | | | | This also ment that some of the misc drivers had to also be fixed up as they were assuming the device was a class_device. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | WorkStruct: make allyesconfigDavid Howells2006-11-221-3/+3
|/ | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* [PATCH] tpm: fix error handlingJeff Garzik2006-10-113-8/+17
| | | | | | | | | | | | - handle sysfs error - handle driver model errors - de-obfuscate platform_device_register_simple() call, which included an assignment in between two function calls, in the same C statement. Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* Merge branch 'merge'Paul Mackerras2006-08-012-19/+59
|\
| * [PATCH] tpm_tis: use resource_size_tKylene Jo Hall2006-07-141-2/+3
| | | | | | | | | | | | | | | | | | | | Fix the start and len variables that should be using the new resource_size_t. Signed_off_by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] tpm: Add force device probe optionKylene Jo Hall2006-07-141-19/+56
| | | | | | | | | | | | | | | | | | | | Some machine manufacturers are not sticking to the TCG specifications and including an ACPI DSDT entry for the TPM which allows PNP discovery of the device. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] tpm: interrupt clear fixKylene Jo Hall2006-07-141-0/+1
| | | | | | | | | | | | | | | | Under stress testing I found that the interrupt is not always cleared. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] TPM: fix failure path leakRandy Dunlap2006-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | kfree(devname) on the misc_register() failure path. Otherwise it is lost forever. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [POWERPC] tmp_atmel: Constify & voidify get_property()Jeremy Kerr2006-07-311-2/+2
|/ | | | | | | | | | | Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. tpm_atmel changes Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] make more file_operation structs staticArjan van de Ven2006-07-034-4/+4
| | | | | | | | | | | | Mark the static struct file_operations in drivers/char as const. Making them const prevents accidental bugs, and moves them to the .rodata section so that they no longer do any false sharing; in addition with the proper debug option they are then protected against corruption.. [akpm@osdl.org: build fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] irq-flags: drivers/char: Use the new IRQF_ constantsThomas Gleixner2006-07-021-2/+2
| | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: more bios log parsing fixesSeiji Munetoh2006-05-311-44/+4
| | | | | | | | | | | | | | | | | | | | From: Seiji Munetoh <seiji.munetoh@gmail.com> Change the binary output format to actual ACPI TCPA log structure since the current format does not contain all event-data information that need to verify the PCRs in TPM. tpm_binary_bios_measurements_show() uses get_event_name() to convert the binary event-data to ascii format, and puts them as binary. However, to verify the PCRs, the event-data must be a actual binary event-data used by SHA1 calc. in BIOS. So, I think actual ACPI TCPA log is good for this binary output format. That way, any userland tools easily parse this data with reference to TCG PC specification. Signed-off-by: Seiji Munetoh <seiji.munetoh@gmail.com> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: bios log parsing fixesSeiji Munetoh2006-05-311-16/+25
| | | | | | | | | | | | From: Seiji Munetoh <seiji.munetoh@gmail.com> Fix "tcpa_pc_event" misalignment between enum, strings and TCG PC spec and output of the event which contains a hash data. Signed-off-by: Seiji Munetoh <seiji.munetoh@gmail.com> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: fix bug for TPM on ThinkPad T60 and Z60Kylene Jo Hall2006-05-261-4/+0
| | | | | | | | | | | | The TPM chip on the ThinkPad T60 and Z60 machines is returning 0xFFFF for the vendor ID which is a check the driver made to double check it was actually talking to the memory mapped space of a TPM. This patch removes the check since it isn't absolutely necessary and was causing device discovery to fail on these machines. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm_register_hardware gcc 4.1 warning fixDaniel Walker2006-05-151-1/+1
| | | | | | | | | | drivers/char/tpm/tpm.c: In function 'tpm_register_hardware': drivers/char/tpm/tpm.c:1157: warning: assignment from incompatible pointer type Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: fix constantKylene Jo Hall2006-05-151-1/+1
| | | | | | | | | Fix the constant used for the base address when it cannot be determined from ACPI. It was off by one order of magnitude. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: update module dependenciesKylene Jo Hall2006-05-151-1/+1
| | | | | | | | | The TIS driver is dependent upon information from the ACPI table for device discovery thus it compiles but does no actual work without this dependency. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: add HID module parameterKylene Jo Hall2006-04-221-1/+12
| | | | | | | | | | | | I recently found that not all BIOS manufacturers are using the specified generic PNP id in their TPM ACPI table entry. I have added the vendor specific IDs that I know about and added a module parameter that a user can specify another HID to the probe list if their device isn't being found by the default list. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud