summaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm/tpm_tis.c
Commit message (Collapse)AuthorAgeFilesLines
* tpm: autoload tpm_tis based on system PnP IDsMatt Domsch2009-11-031-0/+1
| | | | | | | | | | | The tpm_tis driver already has a list of supported pnp_device_ids. This patch simply exports that list as a MODULE_DEVICE_TABLE() so that the module autoloader will discover and load the module at boottime. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
* tpm_tis: TPM_STS_DATA_EXPECT workaroundRajiv Andrade2009-11-021-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | Some newer Lenovo models are shipped with a TPM that doesn't seem to set the TPM_STS_DATA_EXPECT status bit when sending it a burst of data, so the code understands it as a failure and doesn't proceed sending the chip the intended data. In this patch we bypass this bit check in case the itpm module parameter was set. This patch is based on Andy Isaacson's one: http://marc.info/?l=linux-kernel&m=124650185023495&w=2 It was heavily discussed how should we deal with identifying the chip in kernel space, but the required patch to do so was NACK'd: http://marc.info/?l=linux-kernel&m=124650186423711&w=2 This way we let the user choose using this workaround or not based on his observations on this code behavior when trying to use the TPM. Fixed a checkpatch issue present on the previous patch, thanks to Daniel Walker. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Acked-by: Eric Paris <eparis@redhat.com> Tested-by: Seiji Munetoh <seiji.munetoh@gmail.com> Signed-off-by: James Morris <jmorris@namei.org>
* TPM: Fixup boot probe timeout for tpm_tis driverJason Gunthorpe2009-09-101-6/+6
| | | | | | | | | | | | | | | When probing the device in tpm_tis_init the call request_locality uses timeout_a, which wasn't being initalized until after request_locality. This results in request_locality falsely timing out if the chip is still starting. Move the initialization to before request_locality. This probably only matters for embedded cases (ie mine), a BIOS likely gets the TPM into a state where this code path isn't necessary. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
* platform driver: fix incorrect use of 'platform_bus_type' with 'struct ↵Ming Lei2009-03-241-9/+19
| | | | | | | | | | | | | | | | | | | | | | device_driver' This patch fixes the bug reported in http://bugzilla.kernel.org/show_bug.cgi?id=11681. "Lots of device drivers register a 'struct device_driver' with the '.bus' member set to '&platform_bus_type'. This is wrong, since the platform_bus functions expect the 'struct device_driver' to be wrapped up in a 'struct platform_driver' which provides some additional callbacks (like suspend_late, resume_early). The effect may be that platform_suspend_late() uses bogus data outside the device_driver struct as a pointer pointer to the device driver's suspend_late() function or other hard to reproduce failures."(Lothar Wassmann) Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* The tpm_dev_release function is only called for platform devices, not pnpRajiv Andrade2008-10-111-1/+13
| | | | | | | | | | | | | devices, so we implemented the .remove function for pnp ones. Since it's code is very similar to the one inside tpm_dev_release, we've created a helper function tpm_dev_vendor_release, which is called by both. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Morris <jmorris@namei.org>
* tpm: add support for Broadcom TPM TIS device HIDLE DISEZ Erwan2008-07-261-0/+1
| | | | | | | Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tpm: add Intel TPM TIS device HIDMarcin Obara2008-07-101-0/+1
| | | | | | | | | | | This patch adds Intel TPM TIS device HID: ICO0102 Signed-off-by: Marcin Obara <marcin_obara@users.sourceforge.net> Acked-by: Marcel Selhorst <tpm@selhorst.net> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/char: minor irq handler cleanupsJeff Garzik2008-04-201-1/+1
| | | | | | | | | | - remove always-false tests - don't overload 'irq' argument, pass data properly via dev_id - remove pointless casts from void* Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* TPM: fix TIS device driver locality requestMarcel Selhorst2007-11-291-5/+5
| | | | | | | | | | | | | | | | | | | | During the initialization of the TPM TIS driver, the necessary locality has to be requested earlier in the init-process. Depending on the used TPM chip, this leads to wrong information. For example: Lenovo X61s with Atmel TPM: tpm_tis 00:0a: 1.2 TPM (device-id 0xFFFF, rev-id 255) But correct is: tpm_tis 00:0c: 1.2 TPM (device-id 0x3203, rev-id 9) This short patch fixes this issue. Signed-off-by: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Eliminate pointless casts from void* in a few driver irq handlers.Jeff Garzik2007-10-231-2/+2
| | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* tpm: pay attention to IRQ info from PNPBjorn Helgaas2007-10-171-9/+13
| | | | | | | | | | | | If we discover the TIS TPM device via PNP, use the PNP IRQ information rather than probing for an IRQ. If PNP shows no IRQ, run the TPM in polling mode. Tested-by: <valdis.kletnieks@vt.edu> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tpmdd maintainersKent Yoder2007-08-221-0/+2
| | | | | | | | | | | Fix up the maintainers info in the tpm drivers. Kylene will be out for some time, so copying the sourceforge list is the best way to get some attention. Cc: Marcel Selhorst <tpm@selhorst.net> Cc: Kylene Jo Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] tpm_tis: use resource_size_tKylene Jo Hall2006-07-141-2/+3
| | | | | | | | | | Fix the start and len variables that should be using the new resource_size_t. Signed_off_by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: Add force device probe optionKylene Jo Hall2006-07-141-19/+56
| | | | | | | | | | Some machine manufacturers are not sticking to the TCG specifications and including an ACPI DSDT entry for the TPM which allows PNP discovery of the device. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: interrupt clear fixKylene Jo Hall2006-07-141-0/+1
| | | | | | | | Under stress testing I found that the interrupt is not always cleared. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] make more file_operation structs staticArjan van de Ven2006-07-031-1/+1
| | | | | | | | | | | | Mark the static struct file_operations in drivers/char as const. Making them const prevents accidental bugs, and moves them to the .rodata section so that they no longer do any false sharing; in addition with the proper debug option they are then protected against corruption.. [akpm@osdl.org: build fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] irq-flags: drivers/char: Use the new IRQF_ constantsThomas Gleixner2006-07-021-2/+2
| | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: fix bug for TPM on ThinkPad T60 and Z60Kylene Jo Hall2006-05-261-4/+0
| | | | | | | | | | | | The TPM chip on the ThinkPad T60 and Z60 machines is returning 0xFFFF for the vendor ID which is a check the driver made to double check it was actually talking to the memory mapped space of a TPM. This patch removes the check since it isn't absolutely necessary and was causing device discovery to fail on these machines. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: fix constantKylene Jo Hall2006-05-151-1/+1
| | | | | | | | | Fix the constant used for the base address when it cannot be determined from ACPI. It was off by one order of magnitude. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: add HID module parameterKylene Jo Hall2006-04-221-1/+12
| | | | | | | | | | | | I recently found that not all BIOS manufacturers are using the specified generic PNP id in their TPM ACPI table entry. I have added the vendor specific IDs that I know about and added a module parameter that a user can specify another HID to the probe list if their device isn't being found by the default list. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: add interrupt module parameterKylene Jo Hall2006-04-221-35/+43
| | | | | | | | | | This patch adds a boolean module parameter that allows the user to turn interrupt support on and off. The default behavior is to attempt to use interrupts. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: spacing cleanups 2Kylene Jo Hall2006-04-221-13/+9
| | | | | | | | Fixes minor spacing issues. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: check mem start and lenKylene Jo Hall2006-04-221-0/+7
| | | | | | | | | | | The memory start and length values obtained from the ACPI entry need to be checked and filled in with the default values from the specification if they don't exist. This patch fills in the default values and uses them appropriately. Signed-off-by: Kylie Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: msecs_to_jiffies cleanupsKylene Jo Hall2006-04-221-16/+16
| | | | | | | | | | | | | The timeout and duration values used in the tpm driver are not exposed to userspace. This patch converts the storage units to jiffies with msecs_to_jiffies. They were always being used in jiffies so this simplifies things removing the need for calculation all over the place. The change necessitated a type change in the tpm_chip struct to hold jiffies. Signed-off-by: Kylie Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tpm: driver for next generation TPM chipsLeendert van Doorn2006-04-221-0/+647
The driver for the next generation of TPM chips version 1.2 including support for interrupts. The Trusted Computing Group has written the TPM Interface Specification (TIS) which defines a common interface for all manufacturer's 1.2 TPM's thus the name tpm_tis. Signed-off-by: Leendert van Doorn <leendert@watson.ibm.com> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud