summaryrefslogtreecommitdiffstats
path: root/drivers/char/agp/intel-gtt.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915: Use fixed-sized types for stolenChris Wilson2017-01-061-2/+4
| | | | | | | | | | Stolen memory is a hardware resource of known size, so use an accurate fixed integer type rather than the ambiguous variable size_t. This was motivated by the next patch spotting inconsistencies in our types. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170106152013.24684-3-chris@chris-wilson.co.uk
* agp/intel: Flush chipset writes after updating a single PTEChris Wilson2016-08-181-0/+2
| | | | | | | | | | | | | | | | | After we update one PTE for a page, the caller expects to be able to immediately use that through a GGTT read/write. To comply with the callers expectations we therefore need to flush the chipset buffers before returning. Reported-by: Matti Hämäläinen <ccr@tnsp.org> Fixes: d6473f566417 ("drm/i915: Add support for mapping an object page...") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Matti Hämäläinen <ccr@tnsp.org> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.uk
* drm/i915: Add support for mapping an object page by pageChris Wilson2016-06-131-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Introduced a new vm specfic callback insert_page() to program a single pte in ggtt or ppgtt. This allows us to map a single page in to the mappable aperture space. This can be iterated over to access the whole object by using space as meagre as page size. v2: Added low level rpm assertions to insert_page routines (Chris) v3: Added POSTING_READ post register write (Tvrtko) v4: Rebase (Ankit) v5: Removed wmb() and FLUSH_CTL from insert_page, caller to take care of it (Chris) v6: insert_page not working correctly without FLSH_CNTL write, added the write again. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
* agp/intel-gtt: Only register fake agp driver for gen1Daniel Vetter2016-02-111-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fake agp driver for the intel graphics gart is only needed for ums support. And we ditched that a long time ago: commit 03dae59c72ffffd8ef6e005f48ba356c863e0587 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jul 23 16:27:25 2014 +0200 drm/i915: Ditch UMS config option With this there's no longer the problem that 2 drivers (fake agp driver and the drm/i915 driver) fight over the same piece, which fixes apparent dma leaks detected by CONFIG_DMA_API_DEBUG. Note that the leak isn't real since intel-gtt refcounts and will tear down eventually. But the debug code assumes that when the i915 driver unbinds from the pci device everything should be gone. Which isn't the case if we have intel-agp enabled - userspace might need it. But by ditching this intel-gtt setup and teardown is completely tied to the livetime of the "real" driver. While at it untangle the init ordering a bit - the fake agp wouldn't be initialized correctly if i915.ko loads first. Which isn't a problem since when i915 loads in kms mode you won't need the fake agp support needed by the ums driver ... Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93793 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-3-git-send-email-daniel.vetter@ffwll.ch
* agp/intel-gtt: Don't leak the scratch pageDaniel Vetter2016-02-101-2/+6
| | | | | | | | | | | | | | | | Recently discovered by enabling CONFIG_DMA_API_DEBUG in our CI. By the looks of it broken since forever. v2: Don't forget to set the scratch page back to wb (Chris). Reuse intel_gtt_teardown_scratch_page for that (and fix it up to treat needs_dmar y/n correctly). Cc: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93793 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-1-git-send-email-daniel.vetter@ffwll.ch
* Merge tag 'drm-intel-fixes-2015-07-15' into drm-intel-next-queuedDaniel Vetter2015-07-151-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backmerge fixes since it's getting out of hand again with the massive split due to atomic between -next and 4.2-rc. All the bugfixes in 4.2-rc are addressed already (by converting more towards atomic instead of minimal duct-tape) so just always pick the version in next for the conflicts in modeset code. All the other conflicts are just adjacent lines changed. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_gtt.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_ringbuffer.h Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * agp/intel: Fix typo in needs_ilk_vtd_wa()Chris Wilson2015-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In needs_ilk_vtd_wa(), we pass in the GPU device but compared it against the ids for the mobile GPU and the mobile host bridge. That latter is impossible and so likely was just a typo for the desktop GPU device id (which is also buggy). Fixes commit da88a5f7f7d434e2cde1b3e19d952e6d84533662 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Feb 13 09:31:53 2013 +0000 drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILK Reported-by: Ting-Wei Lan <lantw44@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91127 References: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* | drm/i915/gtt: Allow >= 4GB sizes for vm.Mika Kuoppala2015-06-261-2/+2
|/ | | | | | | | | | | We can have exactly 4GB sized ppgtt with 32bit system. size_t is inadequate for this. v2: Convert a lot more places (Daniel) Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel: Serialise after GTT updatesChris Wilson2015-01-281-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | An interesting bug occurs on Pineview through which the root cause is that the writes of the PTE values into the GTT is not serialised with subsequent memory access through the GTT (when using WC updates of the PTE values). This is despite there being a posting read after the GTT update. However, by changing the address of the posting read, the memory access is indeed serialised correctly. Whilst we are manipulating the memory barriers, we can remove the compiler :memory restraint on the intermediate PTE writes knowing that we explicitly perform a posting read afterwards. v2: Replace posting reads with explicit write memory barriers - in particular this is advantages in case of single page objects. Update comments to mention this issue is only with WC writes. Testcase: igt/gem_exec_big #pnv Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88191 Tested-by: huax.lu@intel.com (v1) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp: Fix up email address & attributions in AGP MODULE_AUTHOR tagsDave Jones2014-12-231-1/+1
| | | | | | | | | | | - Remove soon-to-be-dead @redhat address. - Jeff Hartmann wrote the bulk of the original backend code, and should at least get a mention in the MODULE_AUTHOR for backend.o - Various people at Intel have done a lot more work than myself on the intel-* drivers, so again, mention that. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* agp/intel-gtt: Remove get/put_pagesDaniel Vetter2014-09-191-4/+0
| | | | | | | | | | If a page isn't allocated as __GFP_MOVEABLE it won't move around, so no need to grab a reference to lock it into place. Discovered while reviewing page allocation handling in i915 gem. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
* drivers/char: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-02-071-1/+0
| | | | | | | | | | | | | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: David Airlie <airlied@linux.ie> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Corey Minyard <minyard@acm.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Ashley Lai <ashley@ashleylai.com> Cc: Marcel Selhorst <tpmdd@selhorst.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-01-291-0/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
| * drm/i915: Make AGP support optionalVille Syrjälä2013-11-081-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only depend on the intel-gtt module for GTT frobbign on older gens. The intel_agp module is optional, except for UMS and some old XvMC userland on gen3. So make AGP support optional. As before, we will fail the i915 init for UMS and gen3 KMS the same as before if intel_agp isn't around. intel-gtt.c is left with a somewhat ugly ifdef mess, but I'm going to save that for a later cleaning. At least my gen2 still works with the patch and CONFIG_AGP=n. v2: Make i915 depend on X86 and PCI, and intel-gtt depend on PCI Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | agp/intel: Use CPU physical address, not bus address, for ioremap()Bjorn Helgaas2014-01-071-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | In i810_setup(), i830_setup(), and i9xx_setup(), we use the result of pci_bus_address() as an argument to ioremap() and to compute gtt_phys_addr. These should use pci_resource_start() instead because we want the CPU physical address, not the bus address. If there were an AGP device behind a host bridge that translated addresses, e.g., a PNP0A08 device with _TRA != 0, this would fix a bug. I'm not aware of any of those, but they are possible. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | agp/intel: Use pci_bus_address() to get GTTADR bus addressBjorn Helgaas2014-01-071-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Per the Intel 915G/915GV/... Chipset spec (document number 301467-005), GTTADR is a standard PCI BAR. The PCI core reads GTTADR at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. The spec above only mentions 32-bit GTTADR, but we should still use the standard interface. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | agp/intel: Use pci_bus_address() to get MMADR bus addressBjorn Helgaas2014-01-071-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per the Intel 915G/915GV/... Chipset spec (document number 301467-005), MMADR is a standard PCI BAR. The PCI core reads MMADR at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. The spec above only mentions 32-bit MMADR, but we should still use the standard interface. Also, stop clearing the low 19 bits of the bus address because it's invalid to use addresses outside the region defined by the BAR. The spec claims MMADR is 512KB; if that's the case, those bits will be zero anyway. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | agp/intel: Support 64-bit GMADRYinghai Lu2014-01-071-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Per the Intel 915G/915GV/... Chipset spec (document number 301467-005), GMADR is a standard PCI BAR. The PCI core reads GMADR at enumeration-time. Use pci_bus_address() instead of reading it again in the driver. This works correctly for both 32-bit and 64-bit BARs. The spec above only mentions 32-bit GMADR, but Yinghai's patch (link below) indicates some devices have a 64-bit GMADR. [bhelgaas: reworked starting from http://lkml.kernel.org/r/1385851238-21085-13-git-send-email-yinghai@kernel.org] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | agp/intel: Rename gtt_bus_addr to gtt_phys_addrBjorn Helgaas2014-01-071-8/+8
|/ | | | | | | | | | The only use of gtt_bus_addr is as an argument to ioremap(), so it is a CPU physical address, not a bus address. Rename it to gtt_phys_addr to reflect this. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILKChris Wilson2013-02-201-2/+35
| | | | | | | | | | | | | | | | Whilst IOMMU is enabled for the Intel GPU on Ironlake, it appears that using WC writes to update the PTE on the GPU fails miserably. The result looks like the majority of the writes do not land leading to lots of screen corruption and a hard system hang. v2: s/</<=/ to preserve the current exclusion of Sandybridge Reported-by: Nathan Myers <ncm@cantrip.org> Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Nathan Myers <ncm@cantrip.org> [danvet: Remove cc: stable and add tested-by.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Fix gen2 mappable calculationsBen Widawsky2013-02-151-1/+4
| | | | | | | | | | | | | | | | | | When I refactored the code initially, I forgot that gen2 uses a different bar for the CPU mappable aperture. The agp-less code knows nothing of generations less than 5, so we have to expand the gtt_probe function to include the mappable base and end. It was originally broken by me: commit baa09f5fd8a6d033ec075355dda99a65b7f6a0f3 Author: Ben Widawsky <ben@bwidawsk.net> Date: Thu Jan 24 13:49:57 2013 -0800 drm/i915: Add probe and remove to the gtt ops Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: remove intel_gtt structureBen Widawsky2013-01-311-15/+21
| | | | | | | | | | | | | With the probe call in our dispatch table, we can now cut away the last three remaining members in the intel_gtt shared struct and so remove it completely. v2: Rebased on top of Daniel's series Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: bikeshed commit message a bit.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel: Add gma_bus_addrBen Widawsky2013-01-201-2/+3
| | | | | | | | | | | | | | | | | | | | | | | It is no longer used in the i915 code, so isolate it from the shared struct. This was originally part of: commit 0e275518f325418d559c05327775bff894b237f7 Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Jan 14 13:35:33 2013 -0800 agp/intel: decouple more of the agp-i915 sharing Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> That commit had some other hunks which can't be used due to issues Daniel found in previous commits. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: drop squash notice from the commit since it's imo ok to keep this one separate.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Needs_dmar, notBen Widawsky2013-01-201-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reasoning behind our code taking two paths depending upon whether or not we may have been configured for IOMMU isn't clear to me. It should always be safe to use the pci mapping functions as they are designed to abstract the decision we were handling in i915. Aside from simpler code, removing another member for the intel_gtt struct is a nice motivation. I ran this by Chris, and he wasn't concerned about the extra kzalloc, and memory references vs. page_to_phys calculation in the case without IOMMU. v2: Update commit message v3: Remove needs_dmar addition from Zhenyu upstream This reverts (and then other stuff) commit 20652097dadd9a7fb4d652f25466299974bc78f9 Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Thu Dec 13 23:47:47 2012 +0800 drm/i915: Fix missed needs_dmar setting Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2) Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Squash in follow-up fix to remove the bogus hunk which deleted the dma_mask configuration for gen6+.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Remove scratch page from sharedBen Widawsky2013-01-201-4/+5
| | | | | | | | We already had a mapping in both (minus the phys_addr in AGP). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Cut out the infamous ILK w/a from AGP layerBen Widawsky2013-01-201-27/+0
| | | | | | | | | | | | | | | | | | And, move it to where the rest of the logic is. There is some slight functionality changes. There was extra paranoid checks in AGP code making sure we never do idle maps on gen2 parts. That was not duplicated as the simple PCI id check should do the right thing. v2: use IS_GEN5 && IS_MOBILE check instead. For now, this is the same as IS_IRONLAKE_M but is more future proof. The workaround docs hint that more than one platform may be effected, but we've never seen such a platform in the wild. (Rodrigo, Daniel) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1) Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Move GSM mapping into dev_privBen Widawsky2012-12-201-1/+0
| | | | | | | | | | | | | | | | | | | This removes an unused field from the AGP structure and moves it into the dev_priv structure (with a slightly better name). This builds upon the kill-agp series already merged. GSM is a well defined term in the bspec: GSM: Graphics Stolen Memory GTT stolen space is defined for storage of the GFX GTT entries in physical memory. IA can not access GSM directly , it can only access via GTTMMADR. GT can access GSM directly or through GTTMMADR. This is not the entire stolen space. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Kill off now unused gen6+ AGP codeBen Widawsky2012-11-111-307/+11
| | | | | | | | | | v2: Accidently removed an ILK case in i9xx_setup (Nicely found by Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by [v1] : Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Stop using AGP layer for GEN6+Ben Widawsky2012-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: disable wc gtt pte mappings on gen2Daniel Vetter2012-10-121-1/+1
| | | | | | | | | | | | | | | | | | | | It doesn't work since the gtt pte range sits in the middle of the mmio bar. We didn't notice that since both my and Chris' gen2 machines don't support PAT and hence all wc io mapping request will automatically be demoted to uc. This regression has been introduce in commit edef7e685da05c13cce50c0126189c80fe2c8f71 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Sep 14 11:57:47 2012 +0100 agp/intel: Use a write-combining map for updating PTEs Reported-by: Egbert Eich <eich@pdx.freedesktop.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55834 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel: Use a write-combining map for updating PTEsChris Wilson2012-09-201-3/+8
| | | | | | | | | | | | | | | Rewriting the PTE entries using an WC mapping is roughly an order of magnitude faster than through the uncached mapping. This makes an observable difference on workloads that cycle through large numbers of buffers, for example Chromium using ShmPixmaps where virtually all the CPU time is currently spent rebinding the userptr. v2: Limit the WC mapping to older generations as we have observed that the TLB invalidation on SandyBridge+ is unreliable with WC updates. See i-g-t/tests/gem_gtt_cpu_tlb Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: Replace the array of pages with a scatterlistChris Wilson2012-09-201-29/+22
| | | | | | | | | | | | | | | | | | | | | | | | | Rather than have multiple data structures for describing our page layout in conjunction with the array of pages, we can migrate all users over to a scatterlist. One major advantage, other than unifying the page tracking structures, this offers is that we replace the vmalloc'ed array (which can be up to a megabyte in size) with a chain of individual pages which helps reduce memory pressure. The disadvantage is that we then do not have a simple array to iterate, or to access randomly. The common case for this is in the relocation processing, which will typically fit within a single scatterlist page and so be almost the same cost as the simple array. For iterating over the array, the extra function call could be optimised away, but in reality is an insignificant cost of either binding the pages, or performing the pwrite/pread. v2: Fix drm_clflush_sg() to not invoke wbinvd as well! And fix the trivial compile error from rebasing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: fix hsw uncached pteDaniel Vetter2012-08-171-36/+69
| | | | | | | | | | They've changed it ... for no apparent reason. Meh. V2: remove unused 'is_hsw' field. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: add more Haswell PCI IDsPaulo Zanoni2012-08-071-1/+59
| | | | | | | | Also properly indent the HB IDs. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel: use correct GTT offset on VLVJesse Barnes2012-06-201-0/+1
| | | | | | | | VLV is a gen7 device, but we don't currently handle that in the switch. So add it and write the PTEs correctly. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel: allow cacheable and GDFT PTEs on ValleyViewJesse Barnes2012-06-201-2/+9
| | | | | | | | | | | | | | | | | The PTE format is similar to SNB, but we don't support an MLC and don't need chipset flushing. Note: I have my questions whether this is right, given that MLC died for snb & ivb, that ivb has grown a L3$ cache instead (which vlv seems to have, too) and that the LLC bit here isn't actually LLC, but just means 'snoop cpu caches'. But I plan to burn this all with the heat of a thousands suns in my gtt rework, so who cares ;-) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Added note.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: call intel_enable_gttDaniel Vetter2012-06-121-1/+2
| | | | | | | | When drm/i915 is in control of the gtt, we need to call the enable function at all the relevant places ourselves. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel-gtt: move gart base addres setupDaniel Vetter2012-06-121-10/+10
| | | | | | | | | We need this thing much earlier, and it doesn't make sense in the hw enabling function intel_enable_gtt - this does not change over a suspend/resume cycle ... Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915 + agp/intel-gtt: prep work for direct setupDaniel Vetter2012-06-121-9/+37
| | | | | | | | | | | | | | | To be able to directly set up the intel-gtt code from drm/i915 and avoid setting up the fake-agp driver we need to prepare a few things: - pass both the bridge and gpu pci_dev to the probe function and add code to handle the gpu pdev both being present (for drm/i915) and not present (fake agp). - add refcounting to the remove function so that unloading drm/i915 doesn't kill the fake agp driver v2: Fix up the cleanup and refcount, noticed by Jani Nikula. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel-gtt: don't require the agp bridge on setupDaniel Vetter2012-06-121-3/+5
| | | | | | | | | | | We only need it to fake the agp interface and don't actually use it in the driver anywhere. Hence conditionalize that. This is just a prep patch to eventually disable the fake agp driver on gen6+. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/i915: stop using dev->agp->baseDaniel Vetter2012-06-121-3/+2
| | | | | | | | | For that to work we need to export the base address of the gtt mmio window from intel-gtt. Also replace all other uses of dev->agp by values we already have at hand. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel-gtt: remove dead codeDaniel Vetter2012-06-121-3/+0
| | | | | | | | This is a leftover from the conversion of the i81x fake agp driver over to the new intel-gtt code layoute. Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* Merge branch 'drm-intel-next' of ↵Dave Airlie2012-04-121-1/+44
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~danvet/drm-intel into drm-core-next Daniel Vetter wrote First pull request for 3.5-next, slightly large than usual because new things kept coming in since the last pull for 3.4. Highlights: - first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci ids are not yet added, and there's still quite a few patches to merge (mostly modesetting). To make QA easier I've decided to merge this stuff in pieces. - loads of cleanups and prep patches spurred by the above. Especially vlv is a real frankenstein chip, but also hsw is stretching our driver's code design. Expect more to come in this area for 3.5. - more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again, there are more patches needed (and some already queued up), but I wanted to split this a bit for better testing. - pwrite/pread rework and retuning. This series has been in the works for a few months already and a lot of i-g-t tests have been created for it. Now it's finally ready to be merged. Note that one patch in this series touches include/pagemap.h, that patch is acked-by akpm. - reduce mappable pressure and relocation throughput improvements from Chris. - mmap offset exhaustion mitigation by Chris Wilson. - a start at figuring out which codepaths in our messy dri1/ums+gem/kms driver we actually need to support by bailing out of unsupported case. The driver now refuses to load without kms on gen6+ and disallows a few ioctls that userspace never used in certain cases. More of this will definitely come. - More decoupling of global gtt and ppgtt. - Improved dual-link lvds detection by Takashi Iwai. - Shut up the compiler + plus fix the fallout (Ben) - Inverted panel brightness handling (mostly Acer manages to break things in this way). - Small fixlets and adjustements and some minor things to help debugging. Regression-wise QA reported quite a few issues on ivb, but all of them turned out to be hw stability issues which are already fixed in drm-intel-fixes (QA runs the nightly regression tests on -next alone, without -fixes automatically merged in). There's still one issue open on snb, it looks like occlusion query writes are not quite as cache coherent as we've expected. With some of the pwrite adjustements we can now reliably hit this. Kernel workaround for it is in the works." * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits) drm/i915: VCS is not the last ring drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2 drm/i915: make quirks more verbose drm/i915: dump the DMA fetch addr register on pre-gen6 drm/i915/sdvo: Include YRPB as an additional TV output type drm/i915: disallow gem init ioctl on ilk drm/i915: refuse to load on gen6+ without kms drm/i915: extract gt interrupt handler drm/i915: use render gen to switch ring irq functions drm/i915: rip out old HWSTAM missed irq WA for vlv drm/i915: open code gen6+ ring irqs drm/i915: ring irq cleanups drm/i915: add SFUSE_STRAP registers for digital port detection drm/i915: add WM_LINETIME registers drm/i915: add WRPLL clocks drm/i915: add LCPLL control registers drm/i915: add SSC offsets for SBI access drm/i915: add port clock selection support for HSW drm/i915: add S PLL control drm/i915: add PIXCLK_GATE register ... Conflicts: drivers/char/agp/intel-agp.h drivers/char/agp/intel-gtt.c drivers/gpu/drm/i915/i915_debugfs.c
| * drm/i915: add Haswell devices and their PCI IDsEugeni Dodonov2012-04-091-0/+14
| | | | | | | | | | | | | | | | | | This adds product definitions for desktop, mobile and server boards. v2: split into a separate patch, add .has_pch_split feature. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * agp/intel: add ValleyView AGP driverJesse Barnes2012-03-291-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | ... and bind it right to the PCI id. Note that there are still a few things to fix here: - we need to move the tlb flush to a better place in drm/i915. - we need to check snoop support on vlv and implement it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: squash follow-on patch and add todo items to commit msg.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * agp/intel: map more registers for use by the GTT codeJesse Barnes2012-03-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | We need to flush the Gunit TLB when we update GTT PTEs on VLV, but the register for doing so is above the range we normally map. Map the whole register space to make sure we can get it. v2: only map the larger space on gen7+ (Daniel) Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | drm/i915: disable ppgtt on snb when dmar is enabledDaniel Vetter2012-04-021-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Totally unexpected that this regressed. Luckily it sounds like we just need to have dmar disable on the igfx, not the entire system. At least that's what a few days of testing between Tony Vroon and me indicates. Reported-by: Tony Vroon <tony@linx.net> Cc: Tony Vroon <tony@linx.net> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43024 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | drm/i915: add Ivy Bridge GT2 Server entriesEugeni Dodonov2012-04-021-0/+2
|/ | | | | | | | This adds PCI ID for IVB GT2 server variant which we were missing. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> [danvet: fix up conflict because the patch has been diffed against next. tsk.] Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel-gtt: export the gtt pagetable iomappingDaniel Vetter2012-02-091-0/+1
| | | | | | | | | | | We need this because ppgtt page directory entries need to be in the global gtt pagetable. Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* agp/intel-gtt: export the scratch page dma addressDaniel Vetter2012-02-091-5/+4
| | | | | | | | | | | To implement a PPGTT for drm/i915 that fully aliases the GTT, we also need to properly alias the scratch page. Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
OpenPOWER on IntegriCloud