summaryrefslogtreecommitdiffstats
path: root/drivers/block/loop.c
Commit message (Collapse)AuthorAgeFilesLines
...
* fs: move code out of buffer.cAl Viro2012-01-031-1/+0
| | | | | | | | | | | | | | | Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* loop: Fix discard_alignment default settingLukas Czerner2011-12-021-1/+1
| | | | | | | | | | discard_alignment is not relevant to the loop driver since it is supposed to be set as a workaround for the old sector 63 alignments. So set it to zero rather than block size. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reported-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* loop: fix loop block driver discard and encryption commentDave Young2011-11-251-1/+1
| | | | | | | | The loop driver does not support discard if encryption is enabled, fix the comment. Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* loop: cleanup set_status interfaceDmitry Monakhov2011-11-161-15/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Anyone who has read access to loopdev has permission to call set_status and may change important parameters such as lo_offset, lo_sizelimit and so on, which contradicts to read access pattern and definitely equals to write access pattern. 2) Add lo_offset over i_size check to prevent blkdev_size overflow. ##Testcase_bagin #dd if=/dev/zero of=./file bs=1k count=1 #losetup /dev/loop0 ./file /* userspace_application */ struct loop_info64 loinf; fd = open("/dev/loop0", O_RDONLY); ioctl(fd, LOOP_GET_STATUS64, &loinf); /* Set offset to any value which is bigger than i_size, and sizelimit * to nonzero value*/ loinf.lo_offset = 4096*1024; loinf.lo_sizelimit = 1024; ioctl(fd, LOOP_SET_STATUS64, &loinf); /* After this loop device will have size similar to 0x7fffffffffxxxx */ #blockdev --getsz /dev/loop0 ##OUTPUT: 36028797018955968 ##Testcase_end [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* loop: prevent information leak after failed readDmitry Monakhov2011-11-161-1/+2
| | | | | | | | | | | | | | | | | | If read was not fully successful we have to fail whole bio to prevent information leak of old pages ##Testcase_begin dd if=/dev/zero of=./file bs=1M count=1 losetup /dev/loop0 ./file -o 4096 truncate -s 0 ./file # OOps loop offset is now beyond i_size, so read will silently fail. # So bio's pages would not be cleared, may which result in information leak. hexdump -C /dev/loop0 ##testcase_end Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2011-11-041-7/+104
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits) virtio-blk: use ida to allocate disk index hpsa: add small delay when using PCI Power Management to reset for kump cciss: add small delay when using PCI Power Management to reset for kump xen/blkback: Fix two races in the handling of barrier requests. xen/blkback: Check for proper operation. xen/blkback: Fix the inhibition to map pages when discarding sector ranges. xen/blkback: Report VBD_WSECT (wr_sect) properly. xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests. xen-blkfront: plug device number leak in xlblk_init() error path xen-blkfront: If no barrier or flush is supported, use invalid operation. xen-blkback: use kzalloc() in favor of kmalloc()+memset() xen-blkback: fixed indentation and comments xen-blkfront: fix a deadlock while handling discard response xen-blkfront: Handle discard requests. xen-blkback: Implement discard requests ('feature-discard') xen-blkfront: add BLKIF_OP_DISCARD and discard request struct drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd() drivers/block/loop.c: emit uevent on auto release drivers/block/cpqarray.c: use pci_dev->revision loop: always allow userspace partitions and optionally support automatic scanning ... Fic up trivial header file includsion conflict in drivers/block/loop.c
| * drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd()Ayan George2011-09-211-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | If the loop device is associated (lo->lo_state == Lo_bound), it will have a valid bdev pointed to by lo->lo_device. There is no reason to ever pass an additional block_device pointer. Signed-off-by: Ayan George <ayan.george@canonical.com> Cc: Phillip Susi <psusi@cfl.rr.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drivers/block/loop.c: emit uevent on auto releasePhillip Susi2011-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The loopback driver failed to emit the change uevent when auto releasing the device. Fixed lo_release() to pass the bdev to loop_clr_fd() so it can emit the event. Signed-off-by: Phillip Susi <psusi@cfl.rr.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ayan George <ayan@ayan.net> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * loop: always allow userspace partitions and optionally support automatic ↵Kay Sievers2011-08-231-4/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scanning Automatic partition scanning can be requested individually per loop device during its setup by setting LO_FLAGS_PARTSCAN. By default, no partition tables are scanned. Userspace can now always add and remove partitions from all loop devices, regardless if the in-kernel partition scanner is enabled or not. The needed partition minor numbers are allocated from the extended minors space, the main loop device numbers will continue to match the loop minors, regardless of the number of partitions used. # grep . /sys/class/block/loop1/loop/* /sys/block/loop1/loop/autoclear:0 /sys/block/loop1/loop/backing_file:/home/kay/data/stuff/part.img /sys/block/loop1/loop/offset:0 /sys/block/loop1/loop/partscan:1 /sys/block/loop1/loop/sizelimit:0 # ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 Aug 14 20:22 /dev/loop0 brw-rw---- 1 root disk 7, 1 Aug 14 20:23 /dev/loop1 brw-rw---- 1 root disk 259, 0 Aug 14 20:23 /dev/loop1p1 brw-rw---- 1 root disk 259, 1 Aug 14 20:23 /dev/loop1p2 brw-rw---- 1 root disk 7, 99 Aug 14 20:23 /dev/loop99 brw-rw---- 1 root disk 259, 2 Aug 14 20:23 /dev/loop99p1 brw-rw---- 1 root disk 259, 3 Aug 14 20:23 /dev/loop99p2 crw------T 1 root root 10, 237 Aug 14 20:22 /dev/loop-control Cc: Karel Zak <kzak@redhat.com> Cc: Davidlohr Bueso <dave@gnu.org> Acked-By: Tejun Heo <tj@kernel.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * loop: add discard support for loop devicesLukas Czerner2011-08-191-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds discard support for loop devices. Discard is usually supported by SSD and thinly provisioned devices as a method for reclaiming unused space. This is no different than trying to reclaim back space which is not used by the file system on the image, but it still occupies space on the host file system. We can do the reclamation on file system which does support hole punching. So when discard request gets to the loop driver we can translate that to punch a hole to the underlying file, hence reclaim the free space. This is very useful for trimming down the size of the image to only what is really used by the file system on that image. Fstrim may be used for that purpose. It has been tested on ext4, xfs and btrfs with the image file systems ext4, ext3, xfs and btrfs. ext4, or ext6 image on ext4 file system has some problems but it seems that ext4 punch hole implementation is somewhat flawed and it is unrelated to this commit. Also this is a very good method of validating file systems punch hole implementation. Note that when encryption is used, discard support is disabled, because using it might leak some information useful for possible attacker. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | Merge branch 'for-linus' into for-3.2/coreJens Axboe2011-10-241-112/+23
|\ \
| * | loop: remove the incorrect write_begin/write_end shortcutChristoph Hellwig2011-10-171-112/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the loop device tries to call directly into write_begin/write_end instead of going through ->write if it can. This is a fairly nasty shortcut as write_begin and write_end are only callbacks for the generic write code and expect to be called with filesystem specific locks held. This code currently causes various issues for clustered filesystems as it doesn't take the required cluster locks, and it also causes issues for XFS as it doesn't properly lock against the swapext ioctl as called by the defragmentation tools. This in case causes data corruption if defragmentation hits a busy loop device in the wrong time window, as reported by RH QA. The reason why we have this shortcut is that it saves a data copy when doing a transformation on the loop device, which is the technical term for using cryptoloop (or an XOR transformation). Given that cryptoloop has been deprecated in favour of dm-crypt my opinion is that we should simply drop this shortcut instead of finding complicated ways to to introduce a formal interface for this shortcut. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | Merge branch 'v3.1-rc10' into for-3.2/coreJens Axboe2011-10-191-91/+206
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | Conflicts: block/blk-core.c include/linux/blkdev.h Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | loop: fix deadlock when sysfs and LOOP_CLR_FD race against each otherKay Sievers2011-07-311-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LOOP_CLR_FD takes lo->lo_ctl_mutex and tries to remove the loop sysfs files. Sysfs calls show() and waits for lo->lo_ctl_mutex. LOOP_CLR_FD waits for show() to finish to remove the sysfs file. cat /sys/class/block/loop0/loop/backing_file mutex_lock_nested+0x176/0x350 ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop] ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop] loop_attr_do_show_backing_file+0x2f/0xd0 [loop] dev_attr_show+0x1b/0x60 ? sysfs_read_file+0x86/0x1a0 ? __get_free_pages+0x12/0x50 sysfs_read_file+0xaf/0x1a0 ioctl(LOOP_CLR_FD): wait_for_common+0x12c/0x180 ? try_to_wake_up+0x2a0/0x2a0 wait_for_completion+0x18/0x20 sysfs_deactivate+0x178/0x180 ? sysfs_addrm_finish+0x43/0x70 ? sysfs_addrm_start+0x1d/0x20 sysfs_addrm_finish+0x43/0x70 sysfs_hash_and_remove+0x85/0xa0 sysfs_remove_group+0x59/0x100 loop_clr_fd+0x1dc/0x3f0 [loop] lo_ioctl+0x223/0x7a0 [loop] Instead of taking the lo_ctl_mutex from sysfs code, take the inner lo->lo_lock, to protect the access to the backing_file data. Thanks to Tejun for help debugging and finding a solution. Cc: Milan Broz <mbroz@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop ↵Kay Sievers2011-07-311-17/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devices Instead of unconditionally creating a fixed number of dead loop devices which need to be investigated by storage handling services, even when they are never used, we allow distros start with 0 loop devices and have losetup(8) and similar switch to the dynamic /dev/loop-control interface instead of searching /dev/loop%i for free devices. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | loop: add management interface for on-demand device allocationKay Sievers2011-07-311-4/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | loop: replace linked list of allocated devices with an idr indexKay Sievers2011-07-311-72/+80
| |/ | | | | | | | | | | | | | | | | Replace the linked list, that keeps track of allocated devices, with an idr index to allow a more efficient lookup of devices. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: remove support for bio remapping from ->make_requestChristoph Hellwig2011-09-121-3/+2
|/ | | | | | | | | | | | | | | There is very little benefit in allowing to let a ->make_request instance update the bios device and sector and loop around it in __generic_make_request when we can archive the same through calling generic_make_request from the driver and letting the loop in generic_make_request handle it. Note that various drivers got the return value from ->make_request and returned non-zero values for errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* loop: export module parametersNamhyung Kim2011-05-271-3/+14
| | | | | | | | | | | | | | | | | Export 'max_loop' and 'max_part' parameters to sysfs so user can know that how many devices are allowed and how many partitions are supported. If 'max_loop' is 0, there is no restriction on the number of loop devices. User can create/use the devices as many as minor numbers available. If 'max_part' is 0, it means simply the device doesn't support partitioning. Also note that 'max_part' can be adjusted to power of 2 minus 1 form if needed. User should check this value after the module loading if he/she want to use that number correctly (i.e. fdisk, mknod, etc.). Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* loop: handle on-demand devices correctlyNamhyung Kim2011-05-241-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When finding or allocating a loop device, loop_probe() did not take partition numbers into account so that it can result to a different device. Consider following example: $ sudo modprobe loop max_part=15 $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 $ sudo mknod /dev/loop8 b 7 128 $ sudo losetup /dev/loop8 ~/temp/disk-with-3-parts.img $ sudo losetup -a /dev/loop128: [0805]:278201 (/home/namhyung/temp/disk-with-3-parts.img) $ ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 2011-05-24 22:16 /dev/loop0 brw-rw---- 1 root disk 7, 16 2011-05-24 22:16 /dev/loop1 brw-rw---- 1 root disk 7, 2048 2011-05-24 22:18 /dev/loop128 brw-rw---- 1 root disk 7, 2049 2011-05-24 22:18 /dev/loop128p1 brw-rw---- 1 root disk 7, 2050 2011-05-24 22:18 /dev/loop128p2 brw-rw---- 1 root disk 7, 2051 2011-05-24 22:18 /dev/loop128p3 brw-rw---- 1 root disk 7, 32 2011-05-24 22:16 /dev/loop2 brw-rw---- 1 root disk 7, 48 2011-05-24 22:16 /dev/loop3 brw-rw---- 1 root disk 7, 64 2011-05-24 22:16 /dev/loop4 brw-rw---- 1 root disk 7, 80 2011-05-24 22:16 /dev/loop5 brw-rw---- 1 root disk 7, 96 2011-05-24 22:16 /dev/loop6 brw-rw---- 1 root disk 7, 112 2011-05-24 22:16 /dev/loop7 brw-r--r-- 1 root root 7, 128 2011-05-24 22:17 /dev/loop8 After this patch, /dev/loop8 - instead of /dev/loop128 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that LOOP_MAJOR can address. It does not need to be limited by partition numbers unless 'max_loop' param was specified. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* loop: limit 'max_part' module param to DISK_MAX_PARTSNamhyung Kim2011-05-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'max_part' parameter controls the number of maximum partition a loop block device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe loop max_part0000 ------------[ cut here ]------------ kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: loop(+) Pid: 43, comm: insmod Tainted: G W 2.6.39-qemu+ #155 Bochs Bochs RIP: 0010:[<ffffffff8113ce61>] [<ffffffff8113ce61>] internal_create_group= +0x2a/0x170 RSP: 0018:ffff880007b3fde8 EFLAGS: 00000246 RAX: 00000000ffffffef RBX: ffff880007b3d878 RCX: 00000000000007b4 RDX: ffffffff8152da50 RSI: 0000000000000000 RDI: ffff880007b3d878 RBP: ffff880007b3fe38 R08: ffff880007b3fde8 R09: 0000000000000000 R10: ffff88000783b4a8 R11: ffff880007b3d878 R12: ffffffff8152da50 R13: ffff880007b3d868 R14: 0000000000000000 R15: ffff880007b3d800 FS: 0000000002137880(0063) GS:ffff880007c00000(0000) knlGS:00000000000000= 00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000422680 CR3: 0000000007b50000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 43, threadinfo ffff880007b3e000, task ffff880007afb9c= 0) Stack: ffff880007b3fe58 ffffffff811e66dd ffff880007b3fe58 ffffffff811e570b 0000000000000010 ffff880007b3d800 ffff880007a7b390 ffff880007b3d868 0000000000400920 ffff880007b3d800 ffff880007b3fe48 ffffffff8113cfc8 Call Trace: [<ffffffff811e66dd>] ? device_add+0x4bc/0x5af [<ffffffff811e570b>] ? dev_set_name+0x3c/0x3e [<ffffffff8113cfc8>] sysfs_create_group+0xe/0x12 [<ffffffff810b420e>] blk_trace_init_sysfs+0x14/0x16 [<ffffffff8116a090>] blk_register_queue+0x47/0xf7 [<ffffffff8116f527>] add_disk+0xdf/0x290 [<ffffffffa00060eb>] loop_init+0xeb/0x1b8 [loop] [<ffffffffa0006000>] ? 0xffffffffa0005fff [<ffffffff8100020a>] do_one_initcall+0x7a/0x12e [<ffffffff81096804>] sys_init_module+0x9c/0x1e0 [<ffffffff813329bb>] system_call_fastpath+0x16/0x1b Code: c3 55 48 89 e5 41 57 41 56 41 89 f6 41 55 41 54 49 89 d4 53 48 89 fb= 48 83 ec 28 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe = 48 83 7f 30 00 b9 ea ff ff ff 0f 84 18 01 00 00 49 RIP [<ffffffff8113ce61>] internal_create_group+0x2a/0x170 RSP <ffff880007b3fde8> ---[ end trace a123eb592043acad ]--- Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Laurent Vivier <Laurent.Vivier@bull.net> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe2011-03-101-13/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block: remove per-queue pluggingJens Axboe2011-03-101-13/+0
| | | | | | | | | | | | | | | | Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | Merge branch 'for-linus' of ../linux-2.6-block into block-for-2.6.39/coreTejun Heo2011-03-041-5/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This merge creates two set of conflicts. One is simple context conflicts caused by removal of throtl_scheduled_delayed_work() in for-linus and removal of throtl_shutdown_timer_wq() in for-2.6.39/core. The other is caused by commit 255bb490c8 (block: blk-flush shouldn't call directly into q->request_fn() __blk_run_queue()) in for-linus crashing with FLUSH reimplementation in for-2.6.39/core. The conflict isn't trivial but the resolution is straight-forward. * __blk_run_queue() calls in flush_end_io() and flush_data_end_io() should be called with @force_kblockd set to %true. * elv_insert() in blk_kick_flush() should use %ELEVATOR_INSERT_REQUEUE. Both changes are to avoid invoking ->request_fn() directly from request completion path and closely match the changes in the commit 255bb490c8. Signed-off-by: Tejun Heo <tj@kernel.org>
| * | block: kill loop_mutexPetr Uzel2011-03-031-5/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following steps lead to deadlock in kernel: dd if=/dev/zero of=img bs=512 count=1000 losetup -f img mkfs.ext2 /dev/loop0 mount -t ext2 -o loop /dev/loop0 mnt umount mnt/ Stacktrace: [<c102ec04>] irq_exit+0x36/0x59 [<c101502c>] smp_apic_timer_interrupt+0x6b/0x75 [<c127f639>] apic_timer_interrupt+0x31/0x38 [<c101df88>] mutex_spin_on_owner+0x54/0x5b [<fe2250e9>] lo_release+0x12/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a4da5>] fput+0xd5/0x1aa [<fe2250cf>] loop_clr_fd+0x1a9/0x1b1 [loop] [<fe225110>] lo_release+0x39/0x67 [loop] [<c10c4eae>] __blkdev_put+0x7c/0x10c [<c10a59d9>] deactivate_locked_super+0x17/0x36 [<c10b6f37>] sys_umount+0x27e/0x2a5 [<c10b6f69>] sys_oldumount+0xb/0xe [<c1002897>] sysenter_do_call+0x12/0x26 [<ffffffff>] 0xffffffff Regression since 2a48fc0ab24241755dc9, which introduced the private loop_mutex as part of the BKL removal process. As per [1], the mutex can be safely removed. [1] http://www.gossamer-threads.com/lists/linux/kernel/1341930 Addresses: https://bugzilla.novell.com/show_bug.cgi?id=669394 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=29172 Signed-off-by: Petr Uzel <petr.uzel@suse.cz> Cc: stable@kernel.org Reviewed-by: Nikanth Karthikesan <knikanth@suse.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | loop: No need to initialize ->queue_lock explicitly before calling ↵Vivek Goyal2011-03-021-3/+0
|/ | | | | | | | | | blk_cleanup_queue() Now we initialize ->queue_lock at queue allocation time so driver does not have to worry about initializing it before calling blk_cleanup_queue(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* loop: queue_lock NULL pointer derefence in blk_throtl_exitSergey Senozhatsky2011-01-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Performing $ sudo mount -o loop -o umask=0 /dev/sdb1 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so $ sudo modprobe -r loop results in oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffff812479d4>] do_raw_spin_lock+0x14/0x122 Process modprobe (pid: 6189, threadinfo ffff88009a898000, task ffff880154a88000) Call Trace: [<ffffffff81486788>] _raw_spin_lock_irq+0x4a/0x51 [<ffffffff8123404b>] ? blk_throtl_exit+0x3b/0xa0 [<ffffffff8105b120>] ? cancel_delayed_work_sync+0xd/0xf [<ffffffff8123404b>] blk_throtl_exit+0x3b/0xa0 [<ffffffff81229bc8>] blk_release_queue+0x21/0x65 [<ffffffff8123bb06>] kobject_release+0x51/0x66 [<ffffffff8123bab5>] ? kobject_release+0x0/0x66 [<ffffffff8123ce1e>] kref_put+0x43/0x4d [<ffffffff8123ba27>] kobject_put+0x47/0x4b [<ffffffff8122717c>] blk_cleanup_queue+0x56/0x5b [<ffffffffa01c3824>] loop_exit+0x68/0x844 [loop] [<ffffffff8107cccc>] sys_delete_module+0x1e8/0x25b [<ffffffff814864c9>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81002112>] system_call_fastpath+0x16/0x1b because of an attempt to acquire NULL queue_lock. I added the same lines as in blk_queue_make_request - index 44e18c0..49e6a54 100644`fall back to embedded per-queue lock'. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Fix compile warnings due to missing removal of a 'ret' variableJens Axboe2010-12-201-1/+1
| | | | | | | | | | | | | Commit a8adbe3 forgot to remove the return variable, kill it. drivers/block/loop.c: In function 'lo_splice_actor': drivers/block/loop.c:398: warning: unused variable 'ret' [...] fs/nfsd/vfs.c: In function 'nfsd_splice_actor': fs/nfsd/vfs.c:848: warning: unused variable 'ret' Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* fs/splice: Pull buf->ops->confirm() from splice_from_pipe actorsMichał Mirosław2010-12-171-4/+0
| | | | | | | | | | | | | | This patch pulls calls to buf->ops->confirm() from all actors passed (also indirectly) to splice_from_pipe_feed(). Is avoiding the call to buf->ops->confirm() while splice()ing to /dev/null is an intentional optimization? No other user does that and this will remove this special case. Against current linux.git 6313e3c21743cc88bb5bd8aa72948ee1e83937b6. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: remove REQ_HARDBARRIERChristoph Hellwig2010-11-101-6/+0
| | | | | | | | | | | | | | | | | | | | REQ_HARDBARRIER is dead now, so remove the leftovers. What's left at this point is: - various checks inside the block layer. - sanity checks in bio based drivers. - now unused bio_empty_barrier helper. - Xen blockfront use of BLKIF_OP_WRITE_BARRIER - it's dead for a while, but Xen really needs to sort out it's barrier situaton. - setting of ordered tags in uas - dead code copied from old scsi drivers. - scsi different retry for barriers - it's dead and should have been removed when flushes were converted to FS requests. - blktrace handling of barriers - removed. Someone who knows blktrace better should add support for REQ_FLUSH and REQ_FUA, though. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* loop: Properly clear sysfs in autoclear modeMilan Broz2010-10-271-1/+1
| | | | | | | | | | | | | In autoclear mode bdev is NULL but the sysfs entry should be destroyed otherwise this warning appears: WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x82/0x95() sysfs: cannot create duplicate filename '/devices/virtual/block/loop0/loop' Fixes commit ee86273062cbb310665fe49e1f1937d2cf85b0b9 Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* mm: strictly nested kmap_atomic()Peter Zijlstra2010-10-261-2/+2
| | | | | | | | | | | | | | | | | | | | | Ensure kmap_atomic() usage is strictly nested Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-10-221-10/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits) xen-blkfront: disable barrier/flush write support Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c block: remove BLKDEV_IFL_WAIT aic7xxx_old: removed unused 'req' variable block: remove the BH_Eopnotsupp flag block: remove the BLKDEV_IFL_BARRIER flag block: remove the WRITE_BARRIER flag swap: do not send discards as barriers fat: do not send discards as barriers ext4: do not send discards as barriers jbd2: replace barriers with explicit flush / FUA usage jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier jbd: replace barriers with explicit flush / FUA usage nilfs2: replace barriers with explicit flush / FUA usage reiserfs: replace barriers with explicit flush / FUA usage gfs2: replace barriers with explicit flush / FUA usage btrfs: replace barriers with explicit flush / FUA usage xfs: replace barriers with explicit flush / FUA usage block: pass gfp_mask and flags to sb_issue_discard dm: convey that all flushes are processed as empty ...
| * block/loop: implement REQ_FLUSH/FUA supportTejun Heo2010-09-101-9/+9
| | | | | | | | | | | | | | | | | | Deprecate REQ_HARDBARRIER and implement REQ_FLUSH/FUA instead. Also, instead of checking file->f_op->fsync() directly, look at the value of vfs_fsync() and ignore -EINVAL return. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()Tejun Heo2010-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with -EOPNOTSUPP and blk_queue_ordered() is replaced with simpler blk_queue_flush(). blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a device has write cache and can flush it, it should set REQ_FLUSH. If the device can handle FUA writes, it should also set REQ_FUA. All blk_queue_ordered() users are converted. * ORDERED_DRAIN is mapped to 0 which is the default value. * ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH. * ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block/loop: queue ordered mode should be DRAIN_FLUSHTejun Heo2010-09-101-1/+1
| | | | | | | | | | | | | | | | | | | | loop implements FLUSH using fsync but was incorrectly setting its ordered mode to DRAIN. Change it to DRAIN_FLUSH. In practice, this doesn't change anything as loop doesn't make use of the block layer ordered implementation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | Merge branch 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-10-221-0/+101
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.37/drivers' of git://git.kernel.dk/linux-2.6-block: (95 commits) cciss: fix PCI IDs for new Smart Array controllers drbd: add race-breaker to drbd_go_diskless drbd: use dynamic_dev_dbg to optionally log uuid changes dynamic_debug.h: Fix dynamic_dev_dbg() macro if CONFIG_DYNAMIC_DEBUG not set drbd: cleanup: change "<= 0" to "== 0" drbd: relax the grace period of the md_sync timer again drbd: add some more explicit drbd_md_sync drbd: drop wrong debug asserts, fix recently introduced race drbd: cleanup useless leftover warn/error printk's drbd: add explicit drbd_md_sync to drbd_resync_finished drbd: Do not log an ASSERT for P_OV_REQUEST packets while C_CONNECTED drbd: fix for possible deadlock on IO error during resync drbd: fix unlikely access after free and list corruption drbd: fix for spurious fullsync (uuids rotated too fast) drbd: allow for explicit resync-finished notifications drbd: preparation commit, using full state in receive_state() drbd: drbd_send_ack_dp must not rely on header information drbd: Fix regression in recv_bm_rle_bits (compressed bitmap) drbd: Fixed a stupid copy and paste error drbd: Allow larger values for c-fill-target. ... Fix up trivial conflict in drivers/block/ataflop.c due to BKL removal
| * | loop: add some basic read-only sysfs attributesMilan Broz2010-08-231-0/+101
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create /sys/block/loopX/loop directory and provide these attributes: - backing_file - autoclear - offset - sizelimit This loop directory is present only if loop device is configured. To be used in util-linux-ng (and possibly elsewhere like udev rules) where code need to get loop attributes from kernel (and not store duplicate info in userspace). Moreover loop ioctls are not even able to provide full backing file info because of buffer limits. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: autoconvert trivial BKL users to private mutexArnd Bergmann2010-10-051-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The block device drivers have all gained new lock_kernel calls from a recent pushdown, and some of the drivers were already using the BKL before. This turns the BKL into a set of per-driver mutexes. Still need to check whether this is safe to do. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | BLOCK: fix bio.bi_rw handlingJiri Slaby2010-08-231-1/+1
|/ | | | | | | | | | | | Return of the bi_rw tests is no longer bool after commit 74450be1. But results of such tests are stored in bools. This doesn't fit in there for some compilers (gcc 4.5 here), so either use !! magic to get real bools or use ulong where the result is assigned somewhere. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: push down BKL into .open and .releaseArnd Bergmann2010-08-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: remove q->prepare_flush_fn completelyFUJITA Tomonori2010-08-071-1/+1
| | | | | | | | | This removes q->prepare_flush_fn completely (changes the blk_queue_ordered API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: unify flags for struct bio and struct requestChristoph Hellwig2010-08-071-1/+1
| | | | | | | | | | | | | | Remove the current bio flags and reuse the request flags for the bio, too. This allows to more easily trace the type of I/O from the filesystem down to the block driver. There were two flags in the bio that were missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've renamed two request flags that had a superflous RW in them. Note that the flags are in bio.h despite having the REQ_ name - as blkdev.h includes bio.h that is the only way to go for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* sanitize vfs_fsync calling conventionsChristoph Hellwig2010-05-211-2/+2
| | | | | | | | | | | | Now that the last user passing a NULL file pointer is gone we can remove the redundant dentry argument and associated hacks inside vfs_fsynmc_range. The next step will be removig the dentry argument from ->fsync, but given the luck with the last round of method prototype changes I'd rather defer this until after the main merge window. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* generate "change" uevent for loop deviceDavid Zeuthen2010-05-211-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Recent udev versions probe loop devices for filesystems meaning that the /dev/disk hierarchy may contain useful entries such as $ ls -l /dev/disk/by-label/Fedora-12-x86_64-Live lrwxrwxrwx 1 root root 11 Mar 11 13:41 /dev/disk/by-label/Fedora-12-x86_64-Live -> ../../loop0 Unfortunately, no "change" uevent is generated when the loop device is detached so the symlink persists. Additionally, no "change" uevent is guaranteed to be generated when attaching an fd or changing capacity. For example, user space could open the loop device O_RDONLY (in fact, recent util-linux-ng does this) so udev's OPTIONS+="watch" machinery may not trigger the "change" uevent. This patch ensures that the "change" uevent is generated in all of these cases. As a result, the /dev/disk hierarchy works as expected for loop devices. Signed-off-by: David Zeuthen <davidz@redhat.com> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-04-091-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits) cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch loop: Update mtime when writing using aops block: expose the statistics in blkio.time and blkio.sectors for the root cgroup backing-dev: Handle class_create() failure Block: Fix block/elevator.c elevator_get() off-by-one error drbd: lc_element_by_index() never returns NULL cciss: unlock on error path cfq-iosched: Do not merge queues of BE and IDLE classes cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging i2o: Remove the dangerous kobj_to_i2o_device macro block: remove 16 bytes of padding from struct request on 64bits cfq-iosched: fix a kbuild regression block: make CONFIG_BLK_CGROUP visible Remove GENHD_FL_DRIVERFS block: Export max number of segments and max segment size in sysfs block: Finalize conversion of block limits functions block: Fix overrun in lcm() and move it to lib vfs: improve writeback_inodes_wb() paride: fix off-by-one test drbd: fix al-to-on-disk-bitmap for 4k logical_block_size ...
| * loop: Update mtime when writing using aopsNikanth Karthikesan2010-04-081-0/+2
| | | | | | | | | | | | | | | | Update mtime when writing to backing filesystem using the address space operations write_begin and write_end. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-1/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* loop: fix NULL dereference if mount failsAlexey Dobriyan2009-10-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bb21488482bd36eae6b30b014d93619063773fd4 ("[PATCH] switch loop") started to pass NULL bdev to ioctl hook. Steps to reproduce: [boot with loop.max_part=1] [mount -o loop something so mount fails] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 IP: [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 PGD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online CPU 0 Modules linked in: zfs nvidia(P) [last unloaded: zfs] Pid: 15177, comm: mount Tainted: P 2.6.32-rc4-zfs #2 Satellite X200 RIP: 0010:[<ffffffff811486ee>] [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 RSP: 0018:ffff88003b3d5bb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000 R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da FS: 00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920) Stack: ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000 <0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0 <0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000 Call Trace: [<ffffffff812f95f5>] ? schedule_timeout+0x1f5/0x250 [<ffffffff811547d9>] ? rb_insert_color+0x109/0x140 [<ffffffff812fb754>] ? _spin_unlock_irq+0x14/0x40 [<ffffffff812f84c6>] ? wait_for_common+0x66/0x170 [<ffffffff8105a280>] ? default_wake_function+0x0/0x10 [<ffffffff810f8258>] ioctl_by_bdev+0x38/0x50 [<ffffffff811d2481>] loop_clr_fd+0x1e1/0x210 [<ffffffff811d2522>] lo_release+0x72/0x80 [<ffffffff810f934c>] __blkdev_put+0x1ac/0x1d0 [<ffffffff810f937b>] blkdev_put+0xb/0x10 [<ffffffff810f93b9>] blkdev_close+0x39/0x60 [<ffffffff810ccef3>] __fput+0xd3/0x230 [<ffffffff810cd06d>] fput+0x1d/0x30 [<ffffffff810c9680>] filp_close+0x50/0x80 [<ffffffff81061f11>] put_files_struct+0x81/0x100 [<ffffffff81061fde>] exit_files+0x4e/0x60 [<ffffffff81063ec5>] do_exit+0x6b5/0x730 [<ffffffff8107b279>] ? up_read+0x9/0x10 [<ffffffff8104c86e>] ? do_page_fault+0x18e/0x2a0 [<ffffffff81063f81>] do_group_exit+0x41/0xc0 [<ffffffff81064012>] sys_exit_group+0x12/0x20 [<ffffffff81030deb>] system_call_fastpath+0x16/0x1b Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86 RIP [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 RSP <ffff88003b3d5bb8> CR2: 00000000000000b8 ---[ end trace c0b4d3c3118d1427 ]--- Fixing recursive fault but reboot is needed! Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* const: make block_device_operations constAlexey Dobriyan2009-09-221-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud