summaryrefslogtreecommitdiffstats
path: root/drivers/block/drbd
Commit message (Collapse)AuthorAgeFilesLines
* drbd: avoid to shrink max_bio_size due to peer re-configurationLars Ellenberg2013-11-082-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | For a long time, the receiving side has spread "too large" incoming requests over multiple bios. No need to shrink our max_bio_size (max_hw_sectors) if the peer is reconfigured to use a different storage. The problem manifests itself if we are not the top of the device stack (DRBD is used a LVM PV). A hardware reconfiguration on the peer may cause the supported max_bio_size to shrink, and the connection handshake would now unnecessarily shrink the max_bio_size on the active node. There is no way to notify upper layers that they have to "re-stack" their limits. So they won't notice at all, and may keep submitting bios that are suddenly considered "too large for device". We already check for compatibility and ignore changes on the peer, the code only was masked out unless we have a fully established connection. We just need to allow it a bit earlier during the handshake. Also consider max_hw_sectors in our merge bvec function, just in case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: fix decoding of bitmap vli rle for device sizes > 64 TBLars Ellenberg2013-11-081-1/+5
| | | | | | | | | | | | | | | | | Symptoms: disconnect after bitmap exchange due to bitmap overflow (e:49731075554) while decoding bm RLE packet In the decoding step of the variable length integer run length encoding there was potentially an uncatched bitshift by wordsize (variable >> 64). The result of which is "undefined" :( (only "sometimes" the result is the desired 0) Fix: don't do any bit shift magic for shift == 64, just assign. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: Fix adding of new minors with freshly created meta dataPhilipp Reisner2013-11-082-2/+3
| | | | | | | | | | | | | | | | | Online adding of new minors with freshly created meta data to an resource with an established connection failed, with a wrong state transition on one side on one side of the new minor. Freshly created meta-data has a la_size (last agreed size) of 0. When we online add such devices, the code wrongly got into the code path for resyncing new storage that was added while the disk was detached. Fixed that by making the GREW from ZERO a special case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: Fix an connection drop issue after enabling allow-two-primariesPhilipp Reisner2013-11-081-23/+16
| | | | | | | | | | | | | | | | | | | | | | | Since drbd-8.4.0 it is possible to change the allow-two-primaries network option while the connection is established. The sequence code used to partially order packets from the data socket with packets from the meta-data socket, still assued that the allow-two-primaries option is constant while the connection is established. I.e. On a node that has the RESOLVE_CONFLICTS bits set, after enabling allow-two-primaries, when receiving the next data packet it timed out while waiting for the necessary packets on the data socket to arrive (wait_for_and_update_peer_seq() function). Fixed that by always tracking the sequence number, but only waiting for it if allow-two-primaries is set. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: fix NULL pointer deref in module init error pathLars Ellenberg2013-11-081-10/+9
| | | | | | | | | If we want to iterate over the (as of yet still empty) list in the cleanup path, we need to initialize the list before the first goto fail. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacksJoe Perches2013-08-201-1/+1
| | | | | | | | | | | Don't emit OOM warnings when k.alloc calls fail when there there is a v.alloc immediately afterwards. Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* drbd: Allow online change of al-stripes and al-stripe-sizePhilipp Reisner2013-06-285-52/+172
| | | | | | | | | | | | | | | | | | | | | Allow to change the AL layout with an resize operation. For that the reisze command gets two new fields: al_stripes and al_stripe_size. In order to make the operation crash save: 1) Lock out all IO and MD-IO 2) Write the super block with MDF_PRIMARY_IND clear 3) write the bitmap to the new location (all zeros, since we allow only while connected) 4) Initialize the new AL-area 5) Write the super block with the restored MDF_PRIMARY_IND. 6) Unfreeze all IO Since the AL-layout has no influence on the protocol, this operation needs to be beforemed on both sides of a resource (if intended). Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: Constants should be UPPERCASEPhilipp Reisner2013-06-283-14/+19
| | | | | | Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: Ignore the exit code of a fence-peer handler if it returns too latePhilipp Reisner2013-06-283-3/+17
| | | | | | | | | | In case the connection was established and lost again before the a fence-peer handler returns, ignore the exit code of this instance. (And use the exit code of the later started instance) Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: Fix rcu_read_lock balance on error pathAndreas Gruenbacher2013-06-281-7/+12
| | | | | | Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: fix error return code in drbd_init()Wei Yongjun2013-06-281-3/+1
| | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* drbd: Do not sleep inside rcuAndreas Gruenbacher2013-06-281-2/+2
| | | | | Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2013-05-0812-323/+845
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
| * drbd: fix if(); found by kbuild test robotLars Ellenberg2013-03-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Recently introduced al_begin_io_nonblock() was returning -EBUSY, even when it should return -EWOULDBLOCK. Impact: A few spurious wake_up() calls in prepare_al_transaction_nonblock(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: use sched_setscheduler()Philipp Reisner2013-03-281-2/+4
| | | | | | | | | | | | | | | | | | | | It was unnoticed for some time that assigning to current->policy is no longer sufficient to set a real time priority for a kernel thread. Reported-by: Charlie Suffin <Charlie.Suffin@stratus.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: fix for deadlock when using automatic split-brain-recoveryPhilipp Reisner2013-03-281-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With an automatic after split-brain recovery policy of "after-sb-1pri call-pri-lost-after-sb", when trying to drbd_set_role() to R_SECONDARY, we run into a deadlock. This was first recognized and supposedly fixed by 2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are" replacing drbd_set_role() with drbd_change_state() in that code-path, but the first hunk of that patch forgets to remove the drbd_set_role(). We apparently only ever tested the "two primaries" case. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: add module_put() on error path in drbd_proc_open()Alexey Khoroshilov2013-03-281-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | If single_open() fails in drbd_proc_open(), module refcount is left incremented. The patch adds module_put() on the error path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: fix drbd epoch write count for ahead/behind modeLars Ellenberg2013-03-281-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sanity check when receiving P_BARRIER_ACK does expect all write requests with a given req->epoch to have been either all replicated, or all not replicated. Because req->epoch was assigned before calling maybe_pull_ahead(), this expectation was not met, leading to an off-by-one in the sanity check, and further to a "Protocol Error". Fix: move the call to maybe_pull_ahead() a few lines up, and assign req->epoch only after that. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: Fix build error when CONFIG_CRYPTO_HMAC is not setPhilipp Reisner2013-03-281-2/+2
| | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: validate resync_after dependency on attach alreadyLars Ellenberg2013-03-282-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We validated resync_after dependencies, if changed via disk-options. But we did not validate them when first created via attach. We also did not check or cleanup dependencies that used to be correct, but now point to meanwhile removed minor devices. If the drbd_resync_after_valid() validation in disk-options tried to follow a dependency chain in this way, this could lead to NULL pointer dereference. Validate resync_after settings in drbd_adm_attach() already, as well as in drbd_adm_disk_opts(), and and only reject dependency loops. Depending on non-existing disks is allowed and equivalent to no dependency. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: fix memory leakLars Ellenberg2013-03-281-0/+1
| | | | | | | | | | | | | | | | | | We forgot to free the disk_conf, so for each attach/detach cycle we leaked 336 bytes. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: only fail empty flushes if no good data is reachableLars Ellenberg2013-03-282-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | We completed empty flushes (blkdev_issue_flush()) with IO error if we lost the local disk, even if we still have an established replication link to a healthy remote disk. Fix this to only report errors to upper layers, if neither local nor remote data is reachable. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: Fix disconnect to keep the peer disk state if connection breaks during ↵Philipp Reisner2013-03-283-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | operation The issue was that if the connection broke while we did the gracefull state change to C_DISCONNECTING (C_TEARDOWN), then we returned a success code from the state engine. (SS_CW_NO_NEED) The result of that is that we missed to call the fence-peer script in such a case. Fixed that by introducing a new error code (SS_OUTDATE_WO_CONN). This one should never reach back into user space. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: fix spurious warning about bitmap being locked from detachPhilipp Reisner2013-03-281-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduced in drbd: always write bitmap on detach, the bitmap bulk writeout on detach was indicating it expected exclusive bitmap access. Where I meant to say: expect no more modifications, but testing/counting is still allowed. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: drop now useless duplicate state request from invalidatePhilipp Reisner2013-03-281-34/+28
| | | | | | | | | | | | | | | | | | | | | | | | Patch best viewed with git diff --ignore-space-change. Now that we attempt the fallback to local bitmap operation only when disconnected, we can safely drop the extra "silent" state request from both invalidate and invalidate-remote. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: fix effective error returned when refusing an invalidatePhilipp Reisner2013-03-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit drbd: Disallow the peer_disk_state to be D_OUTDATED while connected trying to invalidate a disconnected Primary returned an error code that did not really match the situation: "Refusing to be Outdated while Connected" Insert two more specific conditions into is_valid_state(), changing that to "Need access to UpToDate data", respectively "Need a connection to start verify or resync". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: move invalidating the whole bitmap out of after_state ch()Philipp Reisner2013-03-282-23/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid other state change requests, after passing through sanitize_state(), to be mistaken for an invalidate, move the "set all bits as out-of-sync" into the invalidate path. Make invalidate and invalidate-remote behave consistently wrt. current connection state (need either an established replication link, or really be disconnected). Also mention that in the documentation. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: abort start of resync early, if it raced with connection breakagePhilipp Reisner2013-03-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've seen a spurious full resync, because a connection breakage raced with drbd_start_resync(, C_SYNC_TARGET), and the resulting state change request intended to start the resync ended up looking like a local invalidate. Fix: Double check the state inside the lock, and don't even request that state change, if we had connection or IO problems. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: reset ap_in_flight counter for new connectionsPhilipp Reisner2013-03-281-0/+1
| | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: adjust upper limit for activity log extentsLars Ellenberg2013-03-221-9/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the on-disk activity-log ring buffer size is adjustable, the maximum active set can become larger, and is now limited by the use of 16bit "labels". This increases the maximum working set from 6433 to 65534 extents, each of which covers an area of 4MiB. Which means that if you use the maximum, you'd have to resync more than 250 GiB after an unclean Primary shutdown. With capable backend storage and replication links, this is entirely feasible. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: try hard to max out the updates per AL transactionLars Ellenberg2013-03-221-0/+31
| | | | | | | | | | | | | | | | | | | | There may have been more incoming requests while we where preparing the current transaction. Try to consolidate more updates into this transaction until we make no more progres. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: move start io accounting before activity log transactionLars Ellenberg2013-03-221-3/+3
| | | | | | | | | | | | | | | | | | The IO accounting of the drbd "queue depth" was misleading. We only started IO accounting once we already wrote the activity log. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: consolidate as many updates as possible into one AL transactionLars Ellenberg2013-03-223-14/+107
| | | | | | | | | | | | | | | | | | Depending on current IO depth, try to consolidate as many updates as possible into one activity log transaction. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: queue writes on submitter thread, unless they pass the activity log ↵Lars Ellenberg2013-03-221-8/+12
| | | | | | | | | | | | | | | | fastpath Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: split out some helper functions to drbd_al_begin_ioLars Ellenberg2013-03-221-21/+28
| | | | | | | | | | | | | | | | | | | | To make the code easier to follow, use an explicit find_active_resync_extent(), and add a "nonblock" parameter to _al_get(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: split drbd_al_begin_io into fastpath, prepare, and commitLars Ellenberg2013-03-222-33/+72
| | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: prepare to queue write requests on a submit workerLars Ellenberg2013-03-224-1/+68
| | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: split __drbd_make_request in before and after drbd_al_begin_ioLars Ellenberg2013-03-221-10/+30
| | | | | | | | | | | | | | | | | | This is in preparation to be able to defer requests that need to wait for an activity log transaction to a submitter workqueue. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: drbd_al_being_io: short circuit to reduce latencyLars Ellenberg2013-03-221-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | A request hitting an already "hot" extent should proceed right away, even if some other requests need to wait for pending transactions. Without that short-circuit, several simultaneous make_request contexts race for committing the transaction, possibly penalizing the innocent. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: Clarify when activity log I/O is delegated to the worker threadLars Ellenberg2013-03-225-26/+31
| | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: read meta data early, base on-disk offsets on super blockLars Ellenberg2013-03-224-37/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | We used to calculate all on-disk meta data offsets, and then compare the stored offsets, basically treating them as magic numbers. Now with the activity log striping, the activity log size is no longer fixed. We need to first read the super block, then base the activity log and bitmap offsets on the stored offsets/al stripe settings. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: mechanically rename la_size to la_size_sectLars Ellenberg2013-03-223-12/+12
| | | | | | | | | | | | | | | | Make it obvious that this value is in units of 512 Byte sectors. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: use the cached meta_dev_idxLars Ellenberg2013-03-222-33/+6
| | | | | | | | | | | | | | | | | | Now we have the cached meta_dev_idx member, we can get rid of a few rcu_read_lock() sections and rcu_dereference(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: prepare for new striped layout of activity logLars Ellenberg2013-03-224-40/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce two new on-disk meta data fields: al_stripes and al_stripe_size_4k The intended use case is activity log on RAID 0 or similar. Logically consecutive transactions will advance their on-disk position by al_stripe_size_4k 4kB (transaction sized) blocks. Right now, these are still asserted to be the backward compatible values al_stripes = 1, al_stripe_size_4k = 8 (which amounts to 32kB). Also introduce a caching member for meta_dev_idx in the in-core structure: even though it is initially passed in in the rcu-protected disk_conf structure, it cannot change without a detach/attach cycle. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: cleanup ondisk meta data layout calculations and definesLars Ellenberg2013-03-225-57/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a comment about our meta data layout variants, and rename a few defines (e.g. MD_RESERVED_SECT -> MD_128MB_SECT) to make it clear that they are short hand for fixed constants, and not arbitrarily to be redefined as one may see fit. Properly pad struct meta_data_on_disk to 4kB, and initialize to zero not only the first 512 Byte, but all of it in drbd_md_sync(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * drbd: cleanup bogus assert messageLars Ellenberg2013-03-222-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes ASSERT( mdev->state.disk == D_FAILED ) in drivers/block/drbd/drbd_main.c When we detach from local disk, we let the local refcount hit zero twice. First, we transition to D_FAILED, so we won't give out new references to incoming requests; we still may give out *internal* references, though. Once the refcount hits zero [1] while in D_FAILED, we queue a transition to D_DISKLESS to our worker. We need to queue it, because we may be in atomic context when putting the reference. Once the transition to D_DISKLESS actually happened [2] from worker context, we don't give out new internal references either. Between hitting zero the first time [1] and actually transition to D_DISKLESS [2], there may be a few very short lived internal get/put, so we may hit zero more than once while being in D_FAILED, or even see a race where a an internal get_ldev() happened while D_FAILED, but the corresponding put_ldev() happens just after the transition to D_DISKLESS. That's why we have the additional test_and_set_bit(GO_DISKLESS,); and that's why the assert was placed wrong. Since there was exactly one code path left to drbd_go_diskless(), and that checks already for D_FAILED, drop that assert, and fold in the drbd_queue_work(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | block_device_operations->release() should return voidAl Viro2013-05-071-3/+2
| | | | | | | | | | | | | | | | | | The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'for-linus' of ↵Linus Torvalds2013-05-011-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
| * | procfs: new helper - PDE_DATA(inode)Al Viro2013-04-091-1/+1
| |/ | | | | | | | | | | | | | | | | | | The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | drbd: rename random32() to prandom_u32()Akinobu Mita2013-04-291-2/+3
|/ | | | | | | | | | Use preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud