summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-scsi.c
Commit message (Collapse)AuthorAgeFilesLines
* libata: don't check whether to use DMA or not for no data commandsTejun Heo2008-06-181-9/+7
| | | | | | | | | | There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix libata-scsi kernel-doc notationRandy Dunlap2008-05-301-1/+2
| | | | | | | | | | Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: ignore SIMG4726 config pseudo deviceTejun Heo2008-05-191-6/+0
| | | | | | | | | | | | I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it happy but no even this doesn't work under certain configurations and it's not like we can do anything useful with the cofig device anyway. Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for the config device. This makes the device completely ignored by libata. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata-scsi: improve rbuf handling for simulated commandsTejun Heo2008-04-291-290/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | Buffer length handling in simulated commands is error-prone and full of bugs. There are a number of places where necessary length checks are missing and if the output buffer is passed in as sglist, nothing works. This patch adds a static buffer ata_scsi_rbuf which is sufficiently large to handle the larges output from simulated commands (4k currently), let all simulte functions write to the buffer and removes all length checks as we know that there always is enough buffer space. Copying in (for ATAPI inquiry fix up) and out are handled by sg_copy_to/from_buffer() behind ata_scsi_rbuf_get/put() interface which handles sglist properly. This patch is inspired from buffer length check fix patch from Petr Vandrovec. Updated to use sg_copy_to/from_buffer() as suggested by FUJITA Tomonori. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Petr Vandrovec <petr@vmware.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata-scsi: clean up inquiry / mode sense related functionsTejun Heo2008-04-291-68/+21
| | | | | | | | | | * make ata_scsiop_*() static * make ata_scsi_set_sense() static and move it above its users * make ata_scsi_rbuf_fill() static * kill unused ata_scsi_badcmd() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* SCSI: convert struct class_device to struct deviceTony Jones2008-04-191-7/+8
| | | | | | | | | | | | | It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-04-181-5/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits) [SCSI] iscsi: bidi support for iscsi_tcp [SCSI] iscsi: bidi support at the generic libiscsi level [SCSI] iscsi: extended cdb support [SCSI] zfcp: Fix error handling for blocked unit for send FCP command [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock [SCSI] zfcp: fix 31 bit compile warnings [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands [SCSI] bsg: remove minor in struct bsg_device [SCSI] bsg: use better helper list functions [SCSI] bsg: replace kobject_get with blk_get_queue [SCSI] bsg: takes a ref to struct device in fops->open [SCSI] qla1280: remove version check [SCSI] libsas: fix endianness bug in sas_ata [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next) [SCSI] aacraid: Do not describe check_reset parameter with its value [SCSI] aacraid: Fix down_interruptible() to check the return value [SCSI] sun3_scsi_vme: add MODULE_LICENSE [SCSI] st: rename flush_write_buffer() [SCSI] tgt: use KMEM_CACHE macro [SCSI] initio: fix big endian problems for auto request sense ...
| * [SCSI] libata: use scsi_build_sense_bufferFUJITA Tomonori2008-04-071-5/+1
| | | | | | | | | | | | | | Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | libata: fix boot panic with SATAPI devices on non-SFF HBAsJames Bottomley2008-04-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel now panics reliably on boot if you have a SATAPI device connected. The problem was introduced by the libata merge trying to pull out all the SFF code into a separate module. Unfortunately, if you're a satapi device you usually need to call atapi_request_sense, which has a bare invocation of a SFF callback which is NULL on non-SFF HBAs. Fix this by making the call conditional. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | libata: implement PMP helpersTejun Heo2008-04-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | Implement helpers to test whether PMP is supported, attached and determine pmp number to use when issuing SRST to a link. While at it, move ata_is_host_link() so that it's together with the two new PMP helpers. This change simplifies LLDs and helps making PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
* | libata: make SFF support optionalTejun Heo2008-04-171-0/+2
| | | | | | | | | | | | | | | | | | | | Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo <htejun@gmail.com>
* | libata: rename SFF port opsTejun Heo2008-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | Add sff_ prefix to SFF specific port ops. This rename is in preparation of separating SFF support out of libata core layer. This patch strictly renames ops and doesn't introduce any behavior difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
* | libata: kill ata_ehi_schedule_probe()Tejun Heo2008-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ata_ehi_schedule_probe() was created to hide details of link-resuming reset magic. Now that all the softreset workarounds are gone, scheduling probe is very simple - set probe_mask and request RESET. Kill ata_ehi_schedule_probe() and open code it. This also increases consistency as ata_ehi_schedule_probe() couldn't cover individual device probings so they were open-coded even when the helper existed. While at it, define ATA_ALL_DEVICES as mask of all possible devices on a link and always use it when requesting probe on link level for simplicity and consistency. Setting extra bits in the probe_mask doesn't hurt anybody. Signed-off-by: Tejun Heo <htejun@gmail.com>
* | libata: kill ATA_EHI_RESUME_LINKTejun Heo2008-04-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ATA_EHI_RESUME_LINK has two functions - promote reset to hardreset if ATA_LFLAG_HRST_TO_RESUME is set and preventing EH from shortcutting reset action when probing is requested. The former is gone now and the latter can easily be achieved by making EH to perform at least one reset if reset is requested, which also makes more sense than depending on RESUME_LINK flag. As ATA_EHI_RESUME_LINK was the only EHI reset modifier, this also kills reset modifier handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
* | libata: prefer hardresetTejun Heo2008-04-171-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When both soft and hard resets are available, libata preferred softreset till now. The logic behind it was to be softer to devices; however, this doesn't really help much. Rationales for the change: * BIOS may freeze lock certain things during boot and softreset can't unlock those. This by itself is okay but during operation PHY event or other error conditions can trigger hardreset and the device may end up with different configuration. For example, after a hardreset, previously unlockable HPA can be unlocked resulting in different device size and thus revalidation failure. Similar condition can occur during or after resume. * Certain ATAPI devices require hardreset to recover after certain error conditions. On PATA, this is done by issuing the DEVICE RESET command. On SATA, COMRESET has equivalent effect. The problem is that DEVICE RESET needs its own execution protocol. For SFF controllers with bare TF access, it can be easily implemented but more advanced controllers (e.g. ahci and sata_sil24) require specialized implementations. Simply using hardreset solves the problem nicely. * COMRESET initialization sequence is the norm in SATA land and many SATA devices don't work properly if only SRST is used. For example, some PMPs behave this way and libata works around by always issuing hardreset if the host supports PMP. Like the above example, libata has developed a number of mechanisms aiming to promote softreset to hardreset if softreset is not going to work. This approach is time consuming and error prone. Also, note that, dependingon how you read the specs, it could be argued that PMP fan-out ports require COMRESET to start operation. In fact, all the PMPs on the market except one don't work properly if COMRESET is not issued to fan-out ports after PMP reset. * COMRESET is an integral part of SATA connection and any working device should be able to handle COMRESET properly. After all, it's the way to signal hardreset during reboot. This is the most used and recommended (at least by the ahci spec) method of resetting devices. So, this patch makes libata prefer hardreset over softreset by making the following changes. * Rename ATA_EH_RESET_MASK to ATA_EH_RESET and use it whereever ATA_EH_{SOFT|HARD}RESET used to be used. ATA_EH_{SOFT|HARD}RESET is now only used to tell prereset whether soft or hard reset will be issued. * Strip out now unneeded promote-to-hardreset logics from ata_eh_reset(), ata_std_prereset(), sata_pmp_std_prereset() and other places. Signed-off-by: Tejun Heo <htejun@gmail.com>
* libata: implement ata_qc_raw_nbytes()Tejun Heo2008-03-241-3/+11
| | | | | | | | Implement ata_qc_raw_nbytes() which determines the raw user-requested size of a PC command. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* block: separate out padding from alignmentTejun Heo2008-03-041-1/+2
| | | | | | | | | | | | | | | | Block layer alignment was used for two different purposes - memory alignment and padding. This causes problems in lower layers because drivers which only require memory alignment ends up with adjusted rq->data_len. Separate out padding such that padding occurs iff driver explicitly requests it. Tomo: restorethe code to update bio in blk_rq_map_user introduced by the commit 40b01b9bbdf51ae543a04744283bf2d56c4a6afa according to padding alignment. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: restore the meaning of rq->data_len to the true data lengthFUJITA Tomonori2008-03-041-3/+3
| | | | | | | | | | | | | | | | | | The meaning of rq->data_len was changed to the length of an allocated buffer from the true data length. It breaks SG_IO friends and bsg. This patch restores the meaning of rq->data_len to the true data length and adds rq->extra_len to store an extended length (due to drain buffer and padding). This patch also removes the code to update bio in blk_rq_map_user introduced by the commit 40b01b9bbdf51ae543a04744283bf2d56c4a6afa. The commit adjusts bio according to memory alignment (queue_dma_alignment). However, memory alignment is NOT padding alignment. This adjustment also breaks SG_IO friends and bsg. Padding alignment needs to be fixed in a proper way (by a separate patch). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
* [libata] wrap kmap_atomic(KM_IRQ0) with local_irq_save/restore()Jeff Garzik2008-02-291-0/+10
| | | | | | | | Interrupts must be disabled if using kmap_atomic(KM_IRQ0), but that was not the case in a few code paths coming directly from ATA driver interrupt handlers (which use spin_lock rather than spin_lock_irqsave). Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: automatically use DMADIR if drive/bridge requires itTejun Heo2008-02-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix kernel-doc parameter warningRandy Dunlap2008-02-201-1/+1
| | | | | | | | | Fix libata kernel-doc parameter: Warning(linux-2.6.25-rc2-git3//drivers/ata/libata-scsi.c:845): No description found for parameter 'rq' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement drain buffersJames Bottomley2008-02-191-6/+53
| | | | | | | | | | | | | | | | | | | | This just updates the libata slave configure routine to take advantage of the block layer drain buffers. It also adjusts the size lengths in the atapi code to add the drain buffer to the DMA length so the driver knows it can rely on it. I suspect I should also be checking for AHCI as well as ATA_DEV_ATAPI, but I couldn't see how to do that easily. tj: * atapi_drain_needed() added such that draining is applied to only misc ATAPI commands. * q->bounce_gfp used when allocating drain buffer. * Now duplicate ATAPI PIO drain logic dropped. * ata_dev_printk() used instead of sdev_printk(). Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* libata: eliminate the home grown dma padding in favour ofJames Bottomley2008-02-191-17/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* ata: make ata_scsiop_inq_89 static in libata-scsi.cHarvey Harrison2008-02-151-1/+1
| | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2008-01-251-2/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
| * [SCSI] libata: fix corruption induced by relaxed DMA alignment in SCSIJames Bottomley2008-01-231-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hugh Dickens noticed that SMART commands issued from user space can end up corupting memory. The problem occurs if the buffer used to read data spans two pages. The reason is that the PIO sector routines in libata are expecting physically contiguous pages when they do sector operations, so the left overs on the second page go into the next physically adjacent page rather than the next page in the sg mapping. Fix this by enforcing strict 512 byte alignment on all buffers from userspace. Acked-by: Hugh Dickins <hugh@veritas.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * [SCSI] relax scsi dma alignmentJames Bottomley2008-01-111-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch relaxes the default SCSI DMA alignment from 512 bytes to 4 bytes. I remember from previous discussions that usb and firewire have sector size alignment requirements, so I upped their alignments in the respective slave allocs. The reason for doing this is so that we don't get such a huge amount of copy overhead in bio_copy_user() for udev. (basically all inquiries it issues can now be directly mapped). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()James Bottomley2008-01-231-1/+1
| | | | | | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof()akpm@linux-foundation.org2008-01-231-1/+1
| | | | | | | | | | | | | | Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | libata annotations and fixesAl Viro2008-01-231-2/+2
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | libata: convert to chained sgTejun Heo2008-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*Tejun Heo2008-01-231-5/+5
| | | | | | | | | | | | | | | | | | ATA_PROT_ATAPI_* are ugly and naming schemes between ATA_PROT_* and ATA_PROT_ATAPI_* are inconsistent causing confusion. Rename them to ATAPI_PROT_* and make them consistent with ATA counterpart. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | libata: make atapi_request_sense() use sgTejun Heo2008-01-231-1/+3
| | | | | | | | | | | | | | | | | | atapi_request_sense() is now the only left user of ata_sg_init_one(). Convert it to use sg interface. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Rusty Russel <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | libata: Disable ATA8-ACS proposed Trusted Computing features by defaultAlan Cox2008-01-231-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
* | libata: relocate sdev->manage_start_stop configurationTejun Heo2008-01-141-3/+3
|/ | | | | | | | | | After 9b8e8de7, manage_start_stop configuration depends on valid ATA device. Move it into ata_scsi_dev_config(). This was detected by the coverity checker. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata and starting/stopping ATAPI floppy devicesOndrej Zary2008-01-101-1/+2
| | | | | | | | | | | | | | | Prevent libata from starting/stopping non-ATA devices (like ATAPI floppy drives) as they don't seem to like it: sd 1:0:1:0: [sdb] Starting disk ata2.01: configured for PIO2 sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08 sd 1:0:1:0: [sdb] Sense Key : 0x2 [current] sd 1:0:1:0: [sdb] ASC=0x3a ASCQ=0x0 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: bump transfer chunk size if it's oddTejun Heo2007-11-261-3/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the drives I have follows what the standard says about transfer chunk size. Of the four SATA and six PATA ATAPI devices tested, four ignore transfer chunk size completely and the ones which honor it don't behave according to the spec when it's odd. According to the spec, transfer chunk size can be odd if the amount of data to transfer equals or is smaller than the chunk size and the device can indicate the same odd number and transfer the whole thing at one go with a pad byte appended. However, in reality, none of the drives I have does that. They all indicate and transfer even number of bytes one byte shorter than the chunk size first; then indicate and transfer two bytes, which is clearly out of spec. In addition to unnecessary second PIO data phase, this also creates a weird problem when combined with SATA controllers which perform PIO via DMA. Some of these controllers use actualy number of bytes received to update DMA pointer so chunks which are sized 4n + 2 makes DMA pointer off by two bytes. This causes data corruption and buffer overruns. This patch rounds nbytes up to the nearest even number such that ATAPI devices don't split data transfer for the last odd byte. This shouldn't confuse controllers which depend on transfer chunk size as devices will report the rounded-up number, actually transfer that much and padding buffer is there to receive them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBsMark Lord2007-11-191-1/+2
| | | | | | | | | | | | | | | | | | Sebastian Kemper reported that issuing CD/DVD commands under libata is not fully compatible with ide-scsi. In particular, the GPCMD_SET_STREAMING was being rejected at the host level in some instances. The reason is that libata-scsi insists upon the cmd_len field exactly matching the SCSI opcode being issued, whereas ide-scsi tolerates 12-byte commands contained within a 16-byte (cmd_len) CDB. There doesn't seem to be a good reason for us to not be compatible there, so here is a patch to fix libata-scsi to permit SCSI opcodes so long as they fit within whatever size CDB is provided. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
* [libata] Utilize new SCSI event infrastructureJeff Garzik2007-11-031-3/+5
| | | | | | | An end to CD-ROM polling (if you have a device that supports AN)... hooray! Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* make ata_scsi_lpm_get() staticAdrian Bunk2007-11-031-1/+1
| | | | | | | ata_scsi_lpm_get() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement and use ATA_QCFLAG_QUIETTejun Heo2007-10-301-2/+2
| | | | | | | | | | | | | | | | | | | | Implement ATA_QCFLAG_QUIET which indicates that there's no need to report if the command fails with AC_ERR_DEV and set it for passthrough commands. Combined with previous changes, this now makes device errors for all direct commands reported directly to the issuer without going through EH actions and reporting. Note that EH is still invoked after non-IO device errors to determine the nature of the error and resume command execution (some controller requires special care after error to continue). It just performs default maintenance after error, examines what's going on, realizes that it's none of its business and reports the command failure without logging any error messages. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: flush is an IO commandTejun Heo2007-10-301-0/+3
| | | | | | | | | | | ATA_QCFLAG_IO is used to mark commands which are used to perform regluar IO transfers via block layer. These commands are assumed to be valid and taken more seriously during error handling. Cache flush is used by regular IO path and necessary for data integrity. Mark it with ATA_QCFLAG_IO. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Link power management infrastructureKristen Carlson Accardi2007-10-291-0/+68
| | | | | | | | | | | | | | | | | | | | | | Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: relocate and fix post-command processingTejun Heo2007-10-291-23/+0
| | | | | | | | | | | | | | | | | | | | | | | | Some commands need post-processing after successful completion. This was done in ata_scsi_qc_complete() till now but this has the following problems. * Post-command processing gets executed when qc is completed from EH. Some qc's are retried from EH with zero err_mask and thus triggers unnecessary/incorrect post-command processing. * Command post processing doesn't belong to SAT layer. * Link-wide revalidation was scheduled where device revalidation suffices. This patch moves post-command processing to success completion path of ata_qc_complete() which is travelled iff the command is going to be completed without passing through EH and updates post-command processing such that device-specific action is used. While at it, restructure code a bit for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] checkpatch-inspired cleanupsJeff Garzik2007-10-231-120/+120
| | | | | | | | | | | | Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [SG] Update drivers to use sg helpersJens Axboe2007-10-221-1/+1
| | | | Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2007-10-161-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
| * remove blk_queue_max_phys_segments in libataFUJITA Tomonori2007-10-161-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LIBATA_MAX_PRD is the maximum number of DMA scatter/gather elements permitted by the HBA's DMA engine. It's properly set to q->max_hw_segments via the sg_tablesize parameter. libata shouldn't call blk_queue_max_phys_segments. Now LIBATA_MAX_PRD is equal to SCSI_MAX_PHYS_SEGMENTS by default (both is 128), so everything is fine. But if they are changed, some code (like the scsi mid layer, sg chaining, etc) might not work properly. (Addition from Jens) The basic issue is that the physical segment setting is purely a driver issue. And since SCSI is managing the sglist, libata has no business changing the setting. All libata should care about is the hw segment setting. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | docbook: fix libata contentRandy Dunlap2007-10-151-1/+1
|/ | | | | | | | | Fix libata docbook warnings. Warning(linux-2.6.23-git8//drivers/ata/libata-scsi.c:3251): No description found for parameter 'dev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* libata: fix revalidation issuing after configuration commandsTejun Heo2007-10-151-2/+3
| | | | | | | | | | | | | | After commands which can change device configuration, EH is scheduled to revalidate and reconfigure the device. Host link was incorrectly used unconditionally when scheduling EH action. This resulted in bogus revalidation request and mismatched configuration between device and driver. Fix it. This bug was reported by Igor Durdanovic. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Igor Durdanovic <idurdanovic@comcast.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
OpenPOWER on IntegriCloud