summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/sleep.c
Commit message (Collapse)AuthorAgeFilesLines
* ACPI / PM: Enable all wakeup GPEs in suspend-to-idleChen Yu2015-03-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, in suspend-to-idle, wakeup GPE for PCI devices are handled properly because acpi_pci_sleep_wake() invokes acpi_enable_gpe() to enable the wakeup GPE directly. But for the other wakeup-capable devices in ACPI bus, acpi_enable_wakeup_devices() should be invoked to update enable_for_wake mask in gpe_register_info structure, thus acpi_enable_all_wakeup_gpes() can enable the wakeup GPE referred in _PRW methods. And acpi_disable_wakeup_devices() will be called before disable_irq_wake() in acpi_freeze_restore() to restore the mask. This patch fixes a power button wakeup problem on Surface Pro 3, on which platform power button uses EC to deliver event (EC GPE is referred in _PRW). Note: enabling EC GPE during freeze state may bring some risks because EC events are expected to fire more frequently than others. Thus it may bring the system out of freeze state unnecessarily. (We already have comments about this in bugzilla) Link: https://bugzilla.kernel.org/show_bug.cgi?id=84651 Reported-and-tested-by: Ethan Schoonover <es@ethanschoonover.com> Tested-by: Peter Amidon <psa.pub.0@picnicpark.org> Tested-by: Yani Ioadnnou <yani.ioannou@gmail.com> Tested-by: Mister Wardrop <mister.wardrop@gmail.com> Tested-by: Anton Anikin <anton@anikin.name> Tested-by: Keith McClelland <zismylaptop@gmail.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / sleep: Drop acpi_suspend() which is not usedRafael J. Wysocki2015-03-181-15/+0
| | | | | | | | The acpi_suspend() function has no callers, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
* ACPI / sleep: mark acpi_sleep_dmi_check() __initJan Beulich2015-01-231-1/+1
| | | | | | | | | This makes a difference if the compiler decides not to inline the function, as then the function's reference to acpisleep_dmi_table[] yields a section mismatch warning. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / sleep: Drain outstanding events after disabling multiple GPEsRafael J. Wysocki2014-12-011-0/+2
| | | | | | | | | | | | | After multiple GPEs have been disabled at the low level in one go, like when acpi_disable_all_gpes() is called, we should always drain all of the outstanding events from them, or interesting races become possible. For this reason, call acpi_os_wait_events_complete() after acpi_enable_all_wakeup_gpes() and acpi_disable_all_gpes() in acpi_freeze_prepare() and acpi_power_off_prepare(), respectively. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / sleep: Rework the handling of ACPI GPE wakeup from suspend-to-idleRafael J. Wysocki2014-09-301-0/+16
| | | | | | | | | | | | | | | | | | | The ACPI GPE wakeup from suspend-to-idle is currently based on using the IRQF_NO_SUSPEND flag for the ACPI SCI, but that is problematic for a couple of reasons. First, in principle the ACPI SCI may be shared and IRQF_NO_SUSPEND does not really work well with shared interrupts. Second, it may require the ACPI subsystem to special-case the handling of device notifications depending on whether or not they are received during suspend-to-idle in some places which would lead to fragile code. Finally, it's better the handle ACPI wakeup interrupts consistently with wakeup interrupts from other sources. For this reason, remove the IRQF_NO_SUSPEND flag from the ACPI SCI and use enable_irq_wake()/disable_irq_wake() with it instead, which requires two additional platform hooks to be added to struct platform_freeze_ops. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / sleep: Do not save NVS for new machines to accelerate S3Lan Tianyu2014-07-241-0/+5
| | | | | | | | | | | | | | NVS region is saved and restored unconditionally for machines without nvs_nosave quirk during S3. Tested some new machines and the operation is not necessary. Saving NVS region also affects S2RAM speed. The time of NVS saving and restoring depends on the size of NVS region and it consumes 7~10ms normally. This patch is to make machines produced from 2012 to now not saving NVS region to accelerate S3. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* PM / sleep: trace events for suspend/resumeTodd E Brandt2014-06-071-0/+3
| | | | | | | | | | | | | | | | | | | | Adds trace events that give finer resolution into suspend/resume. These events are graphed in the timelines generated by the analyze_suspend.py script. They represent large areas of time consumed that are typical to suspend and resume. The event is triggered by calling the function "trace_suspend_resume" with three arguments: a string (the name of the event to be displayed in the timeline), an integer (case specific number, such as the power state or cpu number), and a boolean (where true is used to denote the start of the timeline event, and false to denote the end). The suspend_resume trace event reproduces the data that the machine_suspend trace event did, so the latter has been removed. Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / PM: Hold ACPI scan lock over the "freeze" sleep stateRafael J. Wysocki2014-05-161-0/+18
| | | | | | | | | | | | | | | | | The "freeze" sleep state suffers from the same issue that was addressed by commit ad07277e82de (ACPI / PM: Hold acpi_scan_lock over system PM transitions) for ACPI sleep states, that is, things break if ->remove() is called for devices whose system resume callbacks haven't been executed yet. It also can be addressed in the same way, by holding the ACPI scan lock over the "freeze" sleep state and PM transitions to and from that state, but ->begin() and ->end() platform operations for the "freeze" sleep state are needed for this purpose. This change has been tested on Acer Aspire S5 with Thunderbolt. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / PM: Export acpi_target_system_state() to modulesRafael J. Wysocki2014-05-101-0/+1
| | | | | | | | Export the acpi_target_system_state() function to modules so that modular drivers can use it to check what the target ACPI sleep state of the system is (that is needed for i915 mostly at this point). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / sleep: Add extra checks for HW Reduced ACPI mode sleep statesRafael J. Wysocki2014-03-131-17/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931 Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Aubrey Li <aubrey.li@linux.intel.com> Cc: 3.4+ <stable@vger.kernel.org> # 3.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Revert "ACPI / sleep: pm_power_off needs more sanity checks to be installed"Rafael J. Wysocki2014-03-091-6/+1
| | | | | | | | | | Revert commit 3130497f5bab ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") that breaks power ACPI power off on a lot of systems, because it checks wrong registers. Fixes: 3130497f5bab ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ACPI / sleep: pm_power_off needs more sanity checks to be installedLi, Aubrey2014-03-031-1/+6
| | | | | | | | | | Sleep control and status registers need santity checks as well before ACPI installs acpi_power_off to pm_power_off hook. The checking code in acpi_enter_sleep_state() is too late, we should not allow a not-working pm_power_off function to be hooked up. Signed-off-by: Aubrey Li <aubrey.li@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*-. Merge branches 'acpi-gpe', 'acpi-video', 'acpi-thermal', 'acpi-processor', ↵Rafael J. Wysocki2014-01-121-5/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'acpi-sleep' * acpi-gpe: ACPI / EC: disable GPE before removing GPE handler ACPI / Button: Fix enabling button GPEs twice * acpi-video: ACPI: Blacklist Win8 OSI for some HP laptop 2013 models ACPI / video: Fix typo in video_detect.c * acpi-thermal: ACPI / thermal: remove const from thermal_zone_device_ops declaration * acpi-processor: ACPI / scan: bail out early if failed to parse APIC ID for CPU * acpi-sleep: ACPI / sleep: remove panic in case hardware has changed after S4
| | * ACPI / sleep: remove panic in case hardware has changed after S4Oliver Neukum2014-01-111-5/+2
| |/ | | | | | | | | | | | | | | | | | | | | Some BIOSes change hardware based on the state of a laptop's lid. If the lid is closed, the touchpad is disabled and the checksum changes. Windows 8 no longer aborts resume if the checksum has changed. Signed-off-by: Oliver Neukum <oneukum@suse.de> [rjw: Use pr_crit() for the message and don't break the string] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | Merge branch 'acpi-cleanup'Rafael J. Wysocki2014-01-121-7/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
| * ACPI / sleep: Drop redundant acpi_disabled checkHanjun Guo2013-12-071-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | acpi_sleep_init() is only called from acpi_bus_init() and the code logic shows that it doesn't need to check acpi_disabled: acpi_init(); if (acpi_disabled) return; acpi_bus_init(); acpi_sleep_init(); if (acpi_disabled) return 0; Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * ACPI: Clean up inclusions of ACPI header filesLv Zheng2013-12-071-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / sleep: clean up compiler warning about uninitialized fieldAl Stone2013-11-211-1/+1
|/ | | | | | | | | Initialize pwr_btn_status as disabled which (a) makes sure it is in a proper state to start, and (b) cleans up a compiler warning about an uninitialized variable. Signed-off-by: Al Stone <al.stone@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'acpi-assorted'Rafael J. Wysocki2013-08-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-assorted: ACPI / osl: Kill macro INVALID_TABLE(). earlycpio.c: Fix the confusing comment of find_cpio_data(). ACPI / x86: Print Hot-Pluggable Field in SRAT. ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c ACPI / thermal: Remove the unused lock of struct acpi_thermal ACPI / osl: Fix osi_setup_entries[] __initdata attribute location ACPI / numa: Fix __init attribute location in slit_valid() ACPI / dock: Fix __init attribute location in find_dock_and_bay() ACPI / Sleep: Fix incorrect placement of __initdata ACPI / processor: Fix incorrect placement of __initdata ACPI / EC: Fix incorrect placement of __initdata ACPI / scan: Drop unnecessary label from acpi_create_platform_device() ACPI: Move acpi_bus_get_device() from bus.c to scan.c ACPI / scan: Allow platform device creation without any IO resources ACPI: Cleanup sparse warning on acpi_os_initialize1() platform / thinkpad: Remove deprecated hotkey_report_mode parameter ACPI: Remove the old /proc/acpi/event interface
| * ACPI / Sleep: Fix incorrect placement of __initdataSachin Kamat2013-08-071-1/+1
| | | | | | | | | | | | | | | | __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Hold acpi_scan_lock over system PM transitionsRafael J. Wysocki2013-08-211-15/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bad things happen if ACPI hotplug events are handled during system PM transitions, especially if devices are removed as a result. To prevent those bad things from happening, acquire acpi_scan_lock when a PM transition is started and release it when that transition is complete or has been aborted. This fixes resume lockup on my test-bed Acer Aspire S5 that happens when Thunderbolt devices are disconnected from the machine while suspended. Also fixes the analogous problem for Mika Westerberg on an Intel DZ77RE-75K board. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com>
* | ACPI: introduce helper function acpi_execute_simple_method()Jiang Liu2013-07-151-5/+2
|/ | | | | | | | | Introduce helper function acpi_execute_simple_method() and use it in a number of places to simplify code. [rjw: Changelog] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* x86 / ACPI / sleep: Provide registration for acpi_suspend_lowlevel.Konrad Rzeszutek Wilk2013-06-191-0/+2
| | | | | | | | | | | | Which by default will be x86_acpi_suspend_lowlevel. This registration allows us to register another callback if there is a need to use another platform specific callback. Signed-off-by: Liang Tang <liang.tang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Ben Guthro <benjamin.guthro@citrix.com> Acked-by: "H. Peter Anvin" <hpa@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21MFabio Valentini2013-03-271-0/+8
| | | | | | | | | | | | Add Sony Vaio VGN-FW21M to the device blacklist in drivers/acpi/sleep.c. Fixes suspend/resume on this device (device no longer reboots instead of resuming). References: https://bugzilla.kernel.org/show_bug.cgi?id=55001 Signed-off-by: Fabio Valentini <fafatheone@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / Sleep: Avoid interleaved message on errorsJoe Perches2013-03-041-5/+11
| | | | | | | | | | | | | Got this dmesg log on an Acer Aspire 725. [ 0.256351] ACPI: (supports S0ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.256373] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.256391] S3 S4 S5) Avoid this interleaving error messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'acpi-assorted'Rafael J. Wysocki2013-02-151-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | * acpi-assorted: ACPI: Add DMI entry for Sony VGN-FW41E_H ACPI: fix obsolete comment in custom_method.c ACPI / thermal: Use mode to enable/disable kernel thermal processing ACPI thermal: remove unnecessary newline from exception message ACPI sysfs: remove unnecessary newline from exception ACPI video: remove unnecessary newline from error messages ACPI: SRAT: report non-volatile memory in debug ACPI: Rework acpi_get_child() to be more efficient
| * ACPI: Add DMI entry for Sony VGN-FW41E_HJoseph Salisbury2013-02-061-0/+8
| | | | | | | | | | | | | | | | | | | | This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume properly. References: http://bugs.launchpad.net/bugs/1113547 Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: All <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Consolidate suspend-specific and hibernate-specific codeRafael J. Wysocki2013-01-191-36/+51
| | | | | | | | | | | | | | | | | | Move some suspend-specific and hibernate-specific code from acpi_sleep_init() into separate functions to get rid of explicit #ifdefs in acpi_sleep_init(). Use pr_info() to start and pr_cont() to continue printing the supported ACPI sleep states line. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI: Drop power resources driverRafael J. Wysocki2013-01-171-0/+2
|/ | | | | | | | | | | | | | The ACPI power resources driver is not very useful, because the only thing it really does is to restore the state of the power resources that were "on" before system suspend or hibernation, but that may be achieved in a different way. Drop the ACPI power resources driver entirely and add acpi_resume_power_resources() that will walk the list of all registered power resources during system resume and turn on the ones that were "on" before the preceding system suspend or hibernation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'acpi-general'Rafael J. Wysocki2012-12-041-171/+177
|\ | | | | | | | | | | | | * acpi-general: ACPI / PNP: Do not crash due to stale pointer use during system resume ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
| * ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is setZhang Rui2012-11-301-171/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current acpisleep DMI checks only run when CONFIG_SUSPEND is set. And this may break hibernation on some platforms when CONFIG_SUSPEND is cleared. Move acpisleep DMI check into #ifdef CONFIG_ACPI_SLEEP instead. [rjw: Added acpi_sleep_dmi_check() and rebased on top of earlier patches adding entries to acpisleep_dmi_table[].] References: https://bugzilla.kernel.org/show_bug.cgi?id=45921 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | Merge branch 'acpi-general'Rafael J. Wysocki2012-11-291-1/+24
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-general: (38 commits) ACPI / thermal: _TMP and _CRT/_HOT/_PSV/_ACx dependency fix ACPI: drop unnecessary local variable from acpi_system_write_wakeup_device() ACPI: Fix logging when no pci_irq is allocated ACPI: Update Dock hotplug error messages ACPI: Update Container hotplug error messages ACPI: Update Memory hotplug error messages ACPI: Update CPU hotplug error messages ACPI: Add acpi_handle_<level>() interfaces ACPI: remove use of __devexit ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist. ACPI / battery: Correct battery capacity values on Thinkpads Revert "ACPI / x86: Add quirk for "CheckPoint P-20-00" to not use bridge _CRS_ info" ACPI: create _SUN sysfs file ACPI / memhotplug: bind the memory device when the driver is being loaded ACPI / memhotplug: don't allow to eject the memory device if it is being used ACPI / memhotplug: free memory device if acpi_memory_enable_device() failed ACPI / memhotplug: fix memory leak when memory device is unbound from acpi_memhotplug ACPI / memhotplug: deal with eject request in hotplug queue ACPI / memory-hotplug: add memory offline code to acpi_memory_device_remove() ACPI / memory-hotplug: call acpi_bus_trim() to remove memory device ... Conflicts: include/linux/acpi.h (two additions at the end of the same file)
| * ACPI / PM: Add Sony Vaio VPCEB1S1E to nonvs blacklist.Lan Tianyu2012-11-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | Sony Vaio VPCEB1S1E does not resume correctly without acpi_sleep=nonvs, so add it to the ACPI sleep blacklist. References: https://bugzilla.kernel.org/show_bug.cgi?id=48781 Reported-by: Sébastien Wilmet <swilmet@gnome.org> Cc: <stable@vger.kernel.org> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * ACPI / Sleep: add acpi_sleep=nonvs_s3 parameterKristen Carlson Accardi2012-11-151-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | The ACPI specificiation would like us to save NVS at hibernation time, but makes no mention of saving NVS over S3. Not all versions of Windows do this either, and it is clear that not all machines need NVS saved/restored over S3. Allow the user to improve their suspend/resume time by disabling the NVS save/restore at S3 time, but continue to do the NVS save/restore for S4 as specified. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Move device PM functions related to sleep statesRafael J. Wysocki2012-11-151-57/+6
| | | | | | | | | | | | | | | | Introduce helper function returning the target sleep state of the system and use it to move the remaining device power management functions from sleep.c to device_pm.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Split device wakeup management routinesRafael J. Wysocki2012-11-151-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two device wakeup management routines in device_pm.c and sleep.c, acpi_pm_device_run_wake() and acpi_pm_device_sleep_wake(), take a device pointer argument and use it to obtain the ACPI handle of the corresponding ACPI namespace node. That handle is then used to get the address of the struct acpi_device object corresponding to the struct device passed as the argument. Unfortunately, that last operation may be costly, because it involves taking the global ACPI namespace mutex, so it shouldn't be carried out too often. However, the callers of those routines usually call them in a row with acpi_pm_device_sleep_state() which also takes that mutex for the same reason, so it would be more efficient if they ran acpi_bus_get_device() themselves to obtain a pointer to the struct acpi_device object in question and then passed that pointer to the appropriate PM routines. To make that possible, split each of the PM routines mentioned above in two parts, one taking a struct acpi_device pointer argument and the other implementing the current interface for compatibility. Additionally, change acpi_pm_device_run_wake() to actually return an error code if there is an error while setting up runtime remote wakeup for the device. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Move runtime remote wakeup setup routine to device_pm.cRafael J. Wysocki2012-11-151-39/+0
| | | | | | | | | | | | | | | | | | | | | | The ACPI function for setting up devices to do runtime remote wakeup is now located in drivers/acpi/sleep.c, but drivers/acpi/device_pm.c is a more logical place for it, so move it there. No functional changes should result from this modification. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Move device power state selection routine to device_pm.cRafael J. Wysocki2012-11-151-85/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The ACPI function for choosing device power state is now located in drivers/acpi/sleep.c, but drivers/acpi/device_pm.c is a more logical place for it, so move it there. However, instead of moving the function entirely, move its core only under a different name and with a different list of arguments, so that it is more flexible, and leave a wrapper around it in the original location. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | ACPI / PM: Fix device PM kernedoc comments and #ifdefsRafael J. Wysocki2012-11-151-29/+24
| | | | | | | | | | | | | | | | | | | | | | | | The kerneldoc comments for acpi_pm_device_sleep_state(), acpi_pm_device_run_wake(), and acpi_pm_device_sleep_wake() are outdated or otherwise inaccurate and/or don't follow the common kerneldoc patterns, so fix them. Additionally, notice that acpi_pm_device_run_wake() should be under CONFIG_PM_RUNTIME rather than under CONFIG_PM_SLEEP, so fix that too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | PM / ACPI: Take device PM QoS flags into accountRafael J. Wysocki2012-10-241-4/+17
|/ | | | | | | | | | | | | | | | | | | | Make ACPI power management routines and PCI power management routines depending on ACPI take device PM QoS flags into account when deciding what power state to put the device into. In particular, after this change acpi_pm_device_sleep_state() will not return ACPI_STATE_D3_COLD as the deepest available low-power state if PM_QOS_FLAG_NO_POWER_OFF is requested for the device and it will not require remote wakeup to work for the device in the returned low-power state if there is at least one PM QoS flags request for the device, but PM_QOS_FLAG_REMOTE_WAKEUP is not requested for it. Accordingly, acpi_pci_set_power_state() will refuse to put the device into D3cold if PM_QOS_FLAG_NO_POWER_OFF is requested for it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Huang Ying <ying.huang@intel.com>
*---. Merge branches 'delete-gts-bfs', 'misc', 'novell-bugzilla-757888-numa' and ↵Len Brown2012-08-031-6/+22
|\ \ \ | | | | | | | | | | | | 'osc-pcie' into base
| | * \ Merge branch 'release' of ↵Linus Torvalds2012-07-261-1/+1
| | |\ \ | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...
| | * | Merge branch 'master' [vanilla Linus master] into libata-dev.git/upstreamJeff Garzik2012-07-251-5/+19
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two bits were appended to the end of the bitfield list in struct scsi_device. Resolve that conflict by including both bits. Conflicts: include/scsi/scsi_device.h
| | | * | ACPI/PM: specify lowest allowed state for device sleep stateHuang Ying2012-06-231-5/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lower device sleep state can save more power, but has more exit latency too. Sometimes, to satisfy some power QoS and other requirement, we need to constrain the lowest device sleep state. In this patch, a parameter to specify lowest allowed state for acpi_pm_device_sleep_state is added. So that the caller can enforce the constraint via the parameter. This is needed by PCIe D3cold support, where the lowest power state allowed may be D3_HOT instead of default D3_COLD. CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | * | | libata-acpi: add ata port runtime D3Cold supportLin Ming2012-06-291-0/+2
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ATA port may support runtime D3Cold state, for example, Zero-power ODD case. This patch adds wakeup notifier and enable/disable run_wake during supend/resume. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | ACPI / PM: Fix build warning in sleep.c for CONFIG_ACPI_SLEEP unsetRafael J. Wysocki2012-07-261-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_ACPI_SLEEP is unset, the compiler complains that pwr_btn_event_pending is defined but not used. To silence the warning, move the definition of pwr_btn_event_pending under an appropriate #ifdef. Reported-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | | ACPI: delete _GTS/_BFS supportLen Brown2012-07-301-64/+9
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _GTS and _BFS were added to the suspend/resume flow in the ACPI 2.0 specification. Linux dutifully implemented _GTS and _BFS. We discovered that it was rarely seen in systems in the field. Further, some of those systems had AML so bogus that it could never work -- proof that no other operating system supports _GTS and _BFS. So we made _GTS and _BFS optional via modparam, and disabled them by default. But we've had to complicate some code to keep this support in the kernel, as these methods are defined to be evaluated very close to sleep entry and exit. Indeed, no other AML is ever evaluated with interrupts off. We have submitted a proposal for _GTS and _BFS to be officially removed from the ACPI specification on the next revision. Here we remove it from Linux. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| |
| \
| \
| \
| \
| \
*-----. \ Merge branches 'acpi_pad', 'acpica', 'apei-bugzilla-43282', 'battery', ↵Len Brown2012-07-261-1/+1
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | 'cpuidle-coupled', 'cpuidle-tweaks', 'intel_idle-ivb', 'ost', 'red-hat-bz-772730', 'thermal', 'thermal-spear' and 'turbostat-v2' into release
| | | | *-. Merge branches 'bugfix-battery', 'bugfix-misc', 'bugfix-rafael', ↵Len Brown2012-06-041-12/+51
| | | | |\ \ | | | |/ / / | | |/| / / | | | |/ / | | | | | | | | | | | | | | | | | | | | 'bugfix-turbostat', 'bugfix-video' and 'workaround-pss' into release bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPICA: Remove argument of acpi_os_wait_events_completeLin Ming2012-06-011-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the unused argument of acpi_os_wait_events_complete. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
OpenPOWER on IntegriCloud