summaryrefslogtreecommitdiffstats
path: root/drivers/acpi/battery.c
Commit message (Collapse)AuthorAgeFilesLines
* ACPI / battery: Correct battery capacity values on ThinkpadsKamil Iskra2012-11-161-0/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a quirk to correctly report battery capacity on 2010 and 2011 Lenovo Thinkpad models. The affected models that I tested (x201, t410, t410s, and x220) exhibit a problem where, when battery capacity reporting unit is mAh, the values being reported are wrong. Pre-2010 and 2012 models appear to always report in mWh and are thus unaffected. Also, in mid-2012 Lenovo issued a BIOS update for the 2011 models that fixes the issue (tested on x220 with a post-1.29 BIOS). No such update is available for the 2010 models, so those still need this patch. Problem description: for some reason, the affected Thinkpads switch the reporting unit between mAh and mWh; generally, mAh is used when a laptop is plugged in and mWh when it's unplugged, although a suspend/resume or rmmod/modprobe is needed for the switch to take effect. The values reported in mAh are *always* wrong. This does not appear to be a kernel regression; I believe that the values were never reported correctly. I tested back to kernel 2.6.34, with multiple machines and BIOS versions. Simply plugging a laptop into mains before turning it on is enough to reproduce the problem. Here's a sample /proc/acpi/battery/BAT0/info from Thinkpad x220 (before a BIOS update) with a 4-cell battery: present: yes design capacity: 2886 mAh last full capacity: 2909 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 145 mAh design capacity low: 13 mAh cycle count: 0 capacity granularity 1: 1 mAh capacity granularity 2: 1 mAh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Once the laptop switches the unit to mWh (unplug from mains, suspend, resume), the output changes to: present: yes design capacity: 28860 mWh last full capacity: 29090 mWh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 1454 mWh design capacity low: 200 mWh cycle count: 0 capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Can you see how the values for "design capacity", etc., differ by a factor of 10 instead of 14.8 (the design voltage of this battery)? On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the values reported in mWh are correct and the ones in mAh are not. My guess is that this problem has been around ever since those machines were released, but because the most common Thinkpad batteries are rated at 10.8V, the error (8%) is small enough that it simply hasn't been noticed or at least nobody could be bothered to look into it. My patch works around the problem by adjusting the incorrectly reported mAh values by "10000 / design_voltage". The patch also has code to figure out if it should be activated or not. It only activates on Lenovo Thinkpads, only when the unit is mAh, and, as an extra precaution, only when the battery capacity reported through ACPI does not match what is reported through DMI (I've never encountered a machine where the first two conditions would be true but the last would not, but better safe than sorry). I've been using this patch for close to a year on several systems without any problems. References: https://bugzilla.kernel.org/show_bug.cgi?id=41062 Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* ACPI / PM: Fix unused function warnings for CONFIG_PM_SLEEPRafael J. Wysocki2012-08-101-0/+2
| | | | | | | | According to compiler warnings, several suspend/resume functions in ACPI drivers are not used for CONFIG_PM_SLEEP unset, so add #ifdefs to prevent them from being built in that case. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* Merge branch 'release' of ↵Linus Torvalds2012-07-261-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & power management update from Len Brown: "Re-write of the turbostat tool. lower overhead was necessary for measuring very large system when they are very idle. IVB support in intel_idle It's what I run on my IVB, others should be able to also:-) ACPICA core update We have found some bugs due to divergence between Linux and the upstream ACPICA base. Most of these patches are to reduce that divergence to reduce the risk of future bugs. Some cpuidle updates, mostly for non-Intel More will be coming, as they depend on this part. Some thermal management changes needed by non-ACPI systems. Some _OST (OS Status Indication) updates for hot ACPI hot-plug." * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (51 commits) Thermal: Documentation update Thermal: Add Hysteresis attributes Thermal: Make Thermal trip points writeable ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check tools/power: turbostat: fix large c1% issue tools/power: turbostat v2 - re-write for efficiency ACPICA: Update to version 20120711 ACPICA: AcpiSrc: Fix some translation issues for Linux conversion ACPICA: Update header files copyrights to 2012 ACPICA: Add new ACPI table load/unload external interfaces ACPICA: Split file: tbxface.c -> tbxfload.c ACPICA: Add PCC address space to space ID decode function ACPICA: Fix some comment fields ACPICA: Table manager: deploy new firmware error/warning interfaces ACPICA: Add new interfaces for BIOS(firmware) errors and warnings ACPICA: Split exception code utilities to a new file, utexcep.c ACPI: acpi_pad: tune round_robin_time ACPICA: Update to version 20120620 ACPICA: Add support for implicit notify on multiple devices ACPICA: Update comments; no functional change ...
| * ACPI Battery: Added capacitysrinivas pandruvada2012-06-011-0/+9
| | | | | | | | | | | | | | | | | | | | | | Added Capacity field, which is a pre-defined power_supply property. Calculating capacity using current charge/energy and full charge/energy. Some user mode implementations are relying on capacity field to show battery strength and power down decision. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: Use struct dev_pm_ops for power management in the battery driverRafael J. Wysocki2012-07-011-4/+11
|/ | | | | | | | Make the ACPI battery driver define its PM callbacks through a struct dev_pm_ops object rather than by using legacy PM hooks in struct acpi_device_ops. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
* ACPI battery: only refresh the sysfs files when pertinent information changesAndy Whitcroft2012-05-081-1/+9
| | | | | | | | | | | | | | We only need to regenerate the sysfs files when the capacity units change, avoid the update otherwise. The origin of this issue is dates way back to 2.6.38: da8aeb92d4853f37e281f11fddf61f9c7d84c3cd (ACPI / Battery: Update information on info notification and resume) cc: <stable@vger.kernel.org> Signed-off-by: Andy Whitcroft <apw@canonical.com> Tested-by: Ralf Jung <post@ralfj.de> Signed-off-by: Len Brown <len.brown@intel.com>
* switch procfs to umode_t useAl Viro2012-01-031-1/+1
| | | | | | both proc_dir_entry ->mode and populating functions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge branch 'battery' into releaseLen Brown2011-08-051-3/+7
|\
| * Battery: sysfs_remove_battery(): possible circular lockingSergey Senozhatsky2011-08-051-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9c921c22a7f33397a6774d7fa076db9b6a0fd669 Author: Lan Tianyu <tianyu.lan@intel.com> ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() fixed BUG https://bugzilla.kernel.org/show_bug.cgi?id=35642 , but as a side effect made lockdep unhappy with sysfs_remove_battery(): [14818.477168] [14818.477170] ======================================================= [14818.477200] [ INFO: possible circular locking dependency detected ] [14818.477221] 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.477236] ------------------------------------------------------- [14818.477257] s2ram/1599 is trying to acquire lock: [14818.477276] (s_active#8){++++.+}, at: [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.477323] [14818.477325] but task is already holding lock: [14818.477350] (&battery->lock){+.+.+.}, at: [<ffffffffa0047278>] sysfs_remove_battery+0x10/0x4b [battery] [14818.477395] [14818.477397] which lock already depends on the new lock. [14818.477399] [..] [14818.479121] stack backtrace: [14818.479148] Pid: 1599, comm: s2ram Not tainted 3.1.0-dbg-07865-g1280ea8-dirty #668 [14818.479175] Call Trace: [14818.479198] [<ffffffff814828c3>] print_circular_bug+0x293/0x2a4 [14818.479228] [<ffffffff81070cb5>] __lock_acquire+0xfe4/0x164b [14818.479260] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479288] [<ffffffff810718d2>] lock_acquire+0x138/0x1ac [14818.479316] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479345] [<ffffffff81168a79>] sysfs_deactivate+0x9b/0xec [14818.479373] [<ffffffff81169147>] ? sysfs_addrm_finish+0x31/0x5a [14818.479405] [<ffffffff81169147>] sysfs_addrm_finish+0x31/0x5a [14818.479433] [<ffffffff81167bc5>] sysfs_hash_and_remove+0x54/0x77 [14818.479461] [<ffffffff811681b9>] sysfs_remove_file+0x12/0x14 [14818.479488] [<ffffffff81385bf8>] device_remove_file+0x12/0x14 [14818.479516] [<ffffffff81386504>] device_del+0x119/0x17c [14818.479542] [<ffffffff81386575>] device_unregister+0xe/0x1a [14818.479570] [<ffffffff813c6ef9>] power_supply_unregister+0x23/0x27 [14818.479601] [<ffffffffa004729c>] sysfs_remove_battery+0x34/0x4b [battery] [14818.479632] [<ffffffffa004778f>] battery_notify+0x2c/0x3a [battery] [14818.479662] [<ffffffff8148fe82>] notifier_call_chain+0x74/0xa1 [14818.479692] [<ffffffff810624b4>] __blocking_notifier_call_chain+0x6c/0x89 [14818.479722] [<ffffffff810624e0>] blocking_notifier_call_chain+0xf/0x11 [14818.479751] [<ffffffff8107e40e>] pm_notifier_call_chain+0x15/0x27 [14818.479770] [<ffffffff8107ee1a>] enter_state+0xa7/0xd5 [14818.479782] [<ffffffff8107e341>] state_store+0xaa/0xc0 [14818.479795] [<ffffffff8107e297>] ? pm_async_store+0x45/0x45 [14818.479807] [<ffffffff81248837>] kobj_attr_store+0x17/0x19 [14818.479820] [<ffffffff81167e27>] sysfs_write_file+0x103/0x13f [14818.479834] [<ffffffff81109037>] vfs_write+0xad/0x13d [14818.479847] [<ffffffff811092b2>] sys_write+0x45/0x6c [14818.479860] [<ffffffff81492f92>] system_call_fastpath+0x16/0x1b This patch introduces separate lock to struct acpi_battery to grab in sysfs_remove_battery() instead of battery->lock. So fix by Lan Tianyu is still there, we just grab independent lock. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | Merge branch 'release' of ↵Linus Torvalds2011-08-021-32/+50
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits) ACPI: delete stale reference in kernel-parameters.txt ACPI: add missing _OSI strings ACPI: remove NID_INVAL thermal: make THERMAL_HWMON implementation fully internal thermal: split hwmon lookup to a separate function thermal: hide CONFIG_THERMAL_HWMON ACPI print OSI(Linux) warning only once ACPI: DMI workaround for Asus A8N-SLI Premium and Asus A8N-SLI DELUX ACPI / Battery: propagate sysfs error in acpi_battery_add() ACPI / Battery: avoid acpi_battery_add() use-after-free ACPI: introduce "acpi_rsdp=" parameter for kdump ACPI: constify ops structs ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS ACPI: fix 80 char overflow ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() ACPI / Battery: Add the check before refresh sysfs in the battery_notify() ACPI / Battery: Add the hibernation process in the battery_notify() ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirks ACPI / Battery: Change 16-bit signed negative battery current into correct value ACPI / Battery: Add the power unit macro ...
| | \
| | \
| *-. \ Merge branches 'acpica', 'battery', 'boot-irqs', 'bz-24492', 'bz-9528', ↵Len Brown2011-08-021-32/+50
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | 'from-akpm', 'kexec-param' and 'misc' into release Conflicts: Documentation/kernel-parameters.txt Signed-off-by: Len Brown <len.brown@intel.com>
| | | * ACPI: constify ops structsVasiliy Kulikov2011-07-161-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Structs battery_file, acpi_dock_ops, file_operations, thermal_cooling_device_ops, thermal_zone_device_ops, kernel_param_ops are not changed in runtime. It is safe to make them const. register_hotplug_dock_device() was altered to take const "ops" argument to respect acpi_dock_ops' const notion. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: propagate sysfs error in acpi_battery_add()Stefan Hajnoczi2011-07-161-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | Make sure the error return from sysfs_add_battery() is checked and propagated out from acpi_battery_add(). Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: avoid acpi_battery_add() use-after-freeStefan Hajnoczi2011-07-161-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | When acpi_battery_add_fs() fails the error handling code does not clean up completely. Moreover, it does not return resulting in a use-after-free. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: Resolve the race condition in the sysfs_remove_battery()Lan Tianyu2011-07-141-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use battery->lock in sysfs_remove_battery() to make checking, removing, and clearing bat.dev atomic. This is necessary because sysfs_remove_battery() may be invoked concurrently from different paths. https://bugzilla.kernel.org/show_bug.cgi?id=35642 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: Add the check before refresh sysfs in the battery_notify()Lan Tianyu2011-07-141-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the commit 25be5821, add the refresh sysfs when system resumes from suspending. But it didn't check that the battery exists. This will cause battery sysfs files added when the battery doesn't exist. This patch add the check before refreshing. https://bugzilla.kernel.org/show_bug.cgi?id=35642 Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: Add the hibernation process in the battery_notify()Lan Tianyu2011-07-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Commit 25be58215 has added a PM notifier to refresh the sys in order to deal with the unit change of the Battery Present Rate. But it just consided the suspend situation. The problem also will happen during the hibernation according the bug 28192. https://bugzilla.kernel.org/show_bug.cgi?id=28192 This patch adds the hibernation process and fix the bug. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirksLan Tianyu2011-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is cosmetic only, and makes no functional change. Since the acpi_battery_quirks has been deleted, rename acpi_battery_quirks2 with acpi_battery_quirks to clean the code. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: Change 16-bit signed negative battery current into correct valueLan Tianyu2011-07-141-16/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is for some machines which report the battery current as a 16-bit signed negative when it is charging. This is caused by DSDT bug. The commit bc76f90b8a5cf4aceedf210d08d5e8292f820cec has resolved the problem for Acer laptops. But some other machines also have such problem. https://bugzilla.kernel.org/show_bug.cgi?id=33722 Since it is improper that the current is above 32A on laptops whether on AC or on battery, this patch is to check the current and take its absolute value as current and producing a message when it is negative in s16. Remove Acer quirk, as this workaround handles Acer too. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * ACPI / Battery: Add the power unit macroLan Tianyu2011-07-141-3/+8
| |/ | | | | | | | | | | | | This patch is cosmetic only, and makes no functional change. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | treewide: fix potentially dangerous trailing ';' in #defined values/expressionsPhil Carmody2011-07-211-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | All these are instances of #define NAME value; or #define NAME(params_opt) value; These of course fail to build when used in contexts like if(foo $OP NAME) while(bar $OP NAME) and may silently generate the wrong code in contexts such as foo = NAME + 1; /* foo = value; + 1; */ bar = NAME - 1; /* bar = value; - 1; */ baz = NAME & quux; /* baz = value; & quux; */ Reported on comp.lang.c, Message-ID: <ab0d55fe-25e5-482b-811e-c475aa6065c3@c29g2000yqd.googlegroups.com> Initial analysis of the dangers provided by Keith Thompson in that thread. There are many more instances of more complicated macros having unnecessary trailing semicolons, but this pile seems to be all of the cases of simple values suffering from the problem. (Thus things that are likely to be found in one of the contexts above, more complicated ones aren't.) Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* ACPI battery: fribble sysfs files from a resume notifierKyle McMartin2011-03-221-0/+22
| | | | | | | | | | | | | | | Commit da8aeb92 re-poked the battery on resume, but Linus reports that it broke his eee and partially reverted it in b23fffd7. Unfortunately this also results in my x201s giving crack values until the sysfs files are poked again. In the revert message, it was suggested that we poke it from a PM notifier, so let's do that. With this in place, I haven't noticed the units going nutty on my gnome-power-manager across a dozen suspends or so... Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI / Battery: remove battery refresh on resumeLinus Torvalds2011-01-201-1/+0
| | | | | | | | | | | | | | | | | | | | This partially reverts commit da8aeb92d4853f37e281f11fddf61f9c7d84c3cd ("ACPI / Battery: Update information on info notification and resume"), which causes a hang on resume on at least some machines. This bug was bisected on an ASUS EeePC 901, which hangs at resume time if we do that "acpi_battery_refresh(battery)" in the battery resume function. Rafael suspects we'll still need to refresh the sysfs files upon resume, but that that can be done from a PM notifier (that will run after thawing user space). Bisected-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ACPI / Battery: Update information on info notification and resumeRafael J. Wysocki2011-01-121-0/+14
| | | | | | | | | | | | | | | A notification event 0x81 from an ACPI battery device requires us to re-read the battery information structure. Follow this requirement and remove and re-create the battery's attibutes in sysfs so that they reflect the reporting units used by the battery at the moment (those units may actually change sometimes at run time, which happens on some Thinkpads). The approach used in this patch was suggested by Matthew Garrett. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: delete CONFIG_ACPI_PROCFS_POWER and power procfs I/F in 2.6.39Zhang Rui2011-01-121-0/+2
| | | | | | | | | | | | | | | | sysfs I/F for ACPI power devices, including AC and Battery, has been working in upstream kenrel since 2.6.24, Sep 2007. In 2.6.37, we made the sysfs I/F always built in and this option disabled by default. Now, we plan to remove this option and the ACPI power procfs interface in 2.6.39. First, update the feature-removal-schedule to announce this change. Second, add runtime warnings in ACPI AC/Battery/SBS driver, so that users will notice this change even if "make oldconfig" is used. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'battery' into releaseLen Brown2010-10-251-8/+27
|\
| * ACPI / Battery: Return -ENODEV for unknown values in get_property()Rafael J. Wysocki2010-10-231-8/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function acpi_battery_get_property() is called by the power supply framework's function power_supply_show_property() implementing the sysfs interface for power supply devices as the ACPI battery driver's ->get_property() callback. Thus it is supposed to return error code if the value of the given property is unknown. Unfortunately, however, it returns 0 in those cases and puts a wrong (negative) value into the intval field of the union power_supply_propval object provided by power_supply_show_property(). In consequence, wrong negative values are read by user space from the battery's sysfs files. Fix this by making acpi_battery_get_property() return -ENODEV for properties with unknown values (-ENODEV is returned, because power_supply_uevent() returns with error for any other error code returned by power_supply_show_property()). Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI battery: support percentage battery remaining capacityZhang Rui2010-10-221-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the ACPI spec, some kinds of primary battery can report percentage battery remaining capacity directly to OS. In this case, it reports the LastFullChargedCapacity == 100, BatteryPresentRate = 0xFFFFFFFF, and BatteryRemaingCapacity a percentage value, which actually means RemainingBatteryPercentage. Now we found some battery follows this rule even if it's a rechargeable. https://bugzilla.kernel.org/show_bug.cgi?id=15979 Handle these batteries correctly in ACPI battery driver so that they won't break userspace. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI ac/battery/sbs: sysfs I/F always built in, procfs I/F disabled by defaultZhang Rui2010-10-151-21/+0
|/ | | | | | | | | | | ACPI AC/Battery/SBS driver has different kernel option for procfs and sysfs I/F. This patch, 1. Change CONFIG_ACPI_PROCFS_POWER to 'n' by default so that we can remove it in the next release or two. 2. Remove CONFIG_ACPI_SYSFS_POWER and always build in the sysfs I/F of these drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: Don't report current_now if battery reports in mWhMatthew Garrett2010-08-311-1/+0
| | | | | | | | | | | | | | ACPI batteries can report in units of either current or energy. Right now we expose the current_now file even if the battery is reporting energy units, resulting in a file that should contain mA instead containing mW. Don't expose this value unless the battery is reporting current. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI battery: don't invoke power_supply_changed twice when battery is hot-addedZhang Rui2010-07-061-1/+7
| | | | | | | | | | | When battery is hot-added, we should not invoke power_supply_changed in acpi_battery_notify, because it has been invoked in acpi_battery_update, and battery->bat.changed_work is queued in keventd already. https://bugzilla.kernel.org/show_bug.cgi?id=16244 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Alexey Starikovskiy <astarikovskiy@sude.de> Signed-off-by: Len Brown <len.brown@intel.com>
*-. Merge branches 'battery', 'bugzilla-14667', 'bugzilla-15096', ↵Len Brown2010-04-061-0/+1
|\ \ | | | | | | | | | 'bugzilla-15480', 'bugzilla-15521', 'bugzilla-15605', 'gpe-reference-counters', 'misc', 'pxm-fix' and 'video-random-key' into release
| | * include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | ACPI: battery drivers should call power_supply_changed()Alan Jenkins2010-04-041-1/+1
| | | | | | | | | | | | | | | | | | Calling kobject_uevent() directly is a layering violation. In particular, it means we'll miss updating the generic LED trigger. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: battery: Fix CONFIG_ACPI_SYSFS_POWER=nAlan Jenkins2010-04-041-2/+2
|/ | | | | | | | | | | Disabling CONFIG_ACPI_SYSFS_POWER changes the behaviour of acpi_battery_update(). It will call acpi_battery_get_info() even if the battery is not present. I haven't noticed this causing any problem, but it does look like a bad idea. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
*-. Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', ↵Len Brown2010-03-141-2/+2
|\ \ | | | | | | | | | 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release
| | * ACPI: replace acpi_integer by u64Lin Ming2010-01-281-2/+2
| |/ | | | | | | | | | | | | | | acpi_integer is now obsolete and removed from the ACPICA code base, replaced by u64. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: Battery: Add support for _BIX extended info methodAlexey Starikovskiy2010-01-151-10/+58
| | | | | | | | | | Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: Battery: Add bit flagsAlexey Starikovskiy2010-01-151-12/+14
|/ | | | | Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* battery: fix typo in commentJustin P. Mattock2009-12-161-1/+1
| | | | | Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'battery' into releaseLen Brown2009-09-191-0/+20
|\
| * ACPI battery: work around negative s16 battery current on AcerHector Martin2009-08-291-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Acer Aspire 8930G laptops (and possibly others) report the battery current as a 16-bit signed negative when it is charging. It also reports it as 0x10000 when the current is 0. This patch adds a quirk for this which takes the absolute value of the reported current cast to an s16. This is a DSDT bug present in the latest BIOS revision (the EC register is 16 bits signed and the DSDT attempts to take the 16-bit two's complement of this, which works for discharge but not charge. It also breaks zero values because a 32-bit register is used and the high bits aren't thrown away). I've enabled this for all Acer systems which report in mA units. This should be safe since it won't break compliant systems unless they report a current above 32A, which is insane. The patch also detects the valid 32-bit value -1, which indicates unknown status, and does not attempt the fix in that case (note that this does not conflict with 16-bit -1, which is 65535 as read normally and gets translated to 1mA). Signed-off-by: Hector Martin <hector@marcansoft.com> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown2009-08-281-0/+2
|/ | | | | | | | | | | | | Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: battery: fix CONFIG_ACPI_PROCFS_POWER=n build warningLen Brown2009-06-181-7/+5
| | | | | | drivers/acpi/battery.c:841: warning: label ‘end’ defined but not used Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: battery: use .notify method instead of installing handler directlyBjorn Helgaas2009-06-181-17/+5
| | | | | | | | | | | | | | This patch adds a .notify() method. The presence of .notify() causes Linux/ACPI to manage event handlers and notify handlers on our behalf, so we don't have to install and remove them ourselves. This driver apparently relies on seeing ALL notify events, not just device-specific ones (because it used ACPI_ALL_NOTIFY). We use the ACPI_DRIVER_ALL_NOTIFY_EVENTS driver flag to request all events. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Revert "ACPI battery: fix async boot oops"Linus Torvalds2009-04-111-1/+1
| | | | | | | | | | | This reverts commit 5d38258ec026921a7b266f4047ebeaa75db358e5, since the underlying problem got fixed properly in the previous commit ("async: Fix module loading async-work regression"). Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ACPI battery: fix async boot oopsVegard Nossum2009-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | > BUG: unable to handle kernel NULL pointer dereference at (null) What happens is that the battery module's init sections are being freed before the async callback (which was marked __init) has run. This theory is supported by the fact that the bad RIP value is a vmalloc address. The immediate fix is to make this a non-init call. (A better long-term fix is of course to wait with init-section unloading until a module's async initcalls have been run, which would allow us to discard this function which is still only run once, after all. Perhaps a new async_initcall() function for the async/module API, if this is needed for other modules in the future?) Reported-by: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'linus' into releaseLen Brown2009-04-051-1/+0
|\ | | | | | | | | | | | | Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
| * proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan2009-03-311-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* | Merge branch 'constify' into releaseLen Brown2009-04-051-1/+1
|\ \
OpenPOWER on IntegriCloud