summaryrefslogtreecommitdiffstats
path: root/block/blk-settings.c
Commit message (Collapse)AuthorAgeFilesLines
* block: remove artifical max_hw_sectors capChristoph Hellwig2014-10-211-3/+1
| | | | | | | | | | | | | | Set max_sectors to the value the drivers provides as hardware limit by default. Linux had proper I/O throttling for a long time and doesn't rely on a artifically small maximum I/O size anymore. By not limiting the I/O size by default we remove an annoying tuning step required for most Linux installation. Note that both the user, and if absolutely required the driver can still impose a limit for FS requests below max_hw_sectors_kb. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: fix alignment_offset math that assumes io_min is a power-of-2Mike Snitzer2014-10-091-2/+2
| | | | | | | | | | | | | | | | | The math in both blk_stack_limits() and queue_limit_alignment_offset() assume that a block device's io_min (aka minimum_io_size) is always a power-of-2. Fix the math such that it works for non-power-of-2 io_min. This issue (of alignment_offset != 0) became apparent when testing dm-thinp with a thinp blocksize that matches a RAID6 stripesize of 1280K. Commit fdfb4c8c1 ("dm thin: set minimum_io_size to pool's data block size") unlocked the potential for alignment_offset != 0 due to the dm-thin-pool's io_min possibly being a non-power-of-2. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: ensure that bio_add_page() always accepts a page for an empty bioJens Axboe2014-06-101-1/+4
| | | | | | | | | | | | With commit 762380ad9322 added support for chunk sizes and no merging across them, it broke the rule of always allowing adding of a single page to an empty bio. So relax the restriction a bit to allow for that, similarly to what we have always done. This fixes a crash with mkfs.xfs and 512b sector sizes on NVMe. Reported-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* block: add notion of a chunk size for request mergingJens Axboe2014-06-051-0/+18
| | | | | | | | | | | | Some drivers have different limits on what size a request should optimally be, depending on the offset of the request. Similar to dividing a device into chunks. Add a setting that allows the driver to inform the block layer of such a chunk size. The block layer will then prevent merging across the chunks. This is needed to optimally support NVMe with a non-zero stripe size. Signed-off-by: Jens Axboe <axboe@fb.com>
* bcache/md: Use raid stripe sizeKent Overstreet2014-01-081-0/+4
| | | | | | | | | Now that we've got code for raid5/6 stripe awareness, bcache just needs to know about the stripes and when writing partial stripes is expensive - we probably don't want to enable this optimization for raid1 or 10, even though they have stripes. So add a flag to queue_limits. Signed-off-by: Kent Overstreet <kmo@daterainc.com>
* Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-blockLinus Torvalds2013-11-141-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block IO core updates from Jens Axboe: "This is the pull request for the core changes in the block layer for 3.13. It contains: - The new blk-mq request interface. This is a new and more scalable queueing model that marries the best part of the request based interface we currently have (which is fully featured, but scales poorly) and the bio based "interface" which the new drivers for high IOPS devices end up using because it's much faster than the request based one. The bio interface has no block layer support, since it taps into the stack much earlier. This means that drivers end up having to implement a lot of functionality on their own, like tagging, timeout handling, requeue, etc. The blk-mq interface provides all these. Some drivers even provide a switch to select bio or rq and has code to handle both, since things like merging only works in the rq model and hence is faster for some workloads. This is a huge mess. Conversion of these drivers nets us a substantial code reduction. Initial results on converting SCSI to this model even shows an 8x improvement on single queue devices. So while the model was intended to work on the newer multiqueue devices, it has substantial improvements for "classic" hardware as well. This code has gone through extensive testing and development, it's now ready to go. A pull request is coming to convert virtio-blk to this model will be will be coming as well, with more drivers scheduled for 3.14 conversion. - Two blktrace fixes from Jan and Chen Gang. - A plug merge fix from Alireza Haghdoost. - Conversion of __get_cpu_var() from Christoph Lameter. - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven. - A fix for a race between request completion and the timeout handling from Jeff Moyer. This is what caused the merge conflict with blk-mq/core, in case you are looking at that. - A dm stacking fix from Mike Snitzer. - A code consolidation fix and duplicated code removal from Kent Overstreet. - A handful of block bug fixes from Mikulas Patocka, fixing a loop crash and memory corruption on blk cg. - Elevator switch bug fix from Tomoki Sekiyama. A heads-up that I had to rebase this branch. Initially the immutable bio_vecs had been queued up for inclusion, but a week later, it became clear that it wasn't fully cooked yet. So the decision was made to pull this out and postpone it until 3.14. It was a straight forward rebase, just pruning out the immutable series and the later fixes of problems with it. The rest of the patches applied directly and no further changes were made" * 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits) block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: Do not call sector_div() with a 64-bit divisor kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup() block: Consolidate duplicated bio_trim() implementations block: Use rw_copy_check_uvector() block: Enable sysfs nomerge control for I/O requests in the plug list block: properly stack underlying max_segment_size to DM device elevator: acquire q->sysfs_lock in elevator_change() elevator: Fix a race in elevator switching and md device initialization block: Replace __get_cpu_var uses bdi: test bdi_init failure block: fix a probe argument to blk_register_region loop: fix crash if blk_alloc_queue fails blk-core: Fix memory corruption if blkcg_init_queue fails block: fix race between request completion and timeout handling blktrace: Send BLK_TN_PROCESS events to all running traces blk-mq: don't disallow request merges for req->special being set blk-mq: mq plug list breakage blk-mq: fix for flush deadlock ...
| * block: properly stack underlying max_segment_size to DM deviceMike Snitzer2013-11-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch all DM devices will default to BLK_MAX_SEGMENT_SIZE (65536) even if the underlying device(s) have a larger value -- this is due to blk_stack_limits() using min_not_zero() when stacking the max_segment_size limit. 1073741824 before patch: 65536 after patch: 1073741824 Reported-by: Lukasz Flis <l.flis@cyfronet.pl> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.3+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | ARM: 7794/1: block: Rename parameter dma_mask to max_addr for ↵Santosh Shilimkar2013-10-311-4/+4
|/ | | | | | | | | | | | | | | | | blk_queue_bounce_limit() The blk_queue_bounce_limit() API parameter 'dma_mask' is actually the maximum address the device can handle rather than a dma_mask. Rename it accordingly to avoid it being interpreted as dma_mask. No functional change. The idea is to fix the bad assumptions about dma_mask wherever it could be miss-interpreted. Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* block: discard granularity might not be power of 2Shaohua Li2012-12-141-3/+3
| | | | | | | | | | In MD raid case, discard granularity might not be power of 2, for example, a 4-disk raid5 has 3*chunk_size discard granularity. Correct the calculation for such cases. Reported-by: Neil Brown <neilb@suse.de> Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: Implement support for WRITE SAMEMartin K. Petersen2012-09-201-0/+16
| | | | | | | | | | | | | | | | The WRITE SAME command supported on some SCSI devices allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O. This patch implements support for WRITE SAME in the block layer. The blkdev_issue_write_same() function can be used by filesystems and block drivers to replicate a buffer across a block range. This can be used to efficiently initialize software RAID devices, etc. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: do not artificially constrain max_sectors for stacking driversMike Snitzer2012-08-011-2/+1
| | | | | | | | | | | | | | | | | | blk_set_stacking_limits is intended to allow stacking drivers to build up the limits of the stacked device based on the underlying devices' limits. But defaulting 'max_sectors' to BLK_DEF_MAX_SECTORS (1024) doesn't allow the stacking driver to inherit a max_sectors larger than 1024 -- due to blk_stack_limits' use of min_not_zero. It is now clear that this artificial limit is getting in the way so change blk_set_stacking_limits's max_sectors to UINT_MAX (which allows stacking drivers like dm-multipath to inherit 'max_sectors' from the underlying paths). Reported-by: Vijay Chauhan <vijay.chauhan@netapp.com> Tested-by: Vijay Chauhan <vijay.chauhan@netapp.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: Introduce blk_set_stacking_limits functionMartin K. Petersen2012-01-111-8/+24
| | | | | | | | | | | | | | | | | | | | | Stacking driver queue limits are typically bounded exclusively by the capabilities of the low level devices, not by the stacking driver itself. This patch introduces blk_set_stacking_limits() which has more liberal metrics than the default queue limits function. This allows us to inherit topology parameters from bottom devices without manually tweaking the default limits in each driver prior to calling the stacking function. Since there is now a clear distinction between stacking and low-level devices, blk_set_default_limits() has been modified to carry the more conservative values that we used to manually set in blk_queue_make_request(). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
* block: Fix discard topology stacking and reportingMartin K. Petersen2011-05-181-1/+2
| | | | | | | | | | | | | | | | | | In some cases we would end up stacking discard_zeroes_data incorrectly. Fix this by enabling the feature by default for stacking drivers and clearing it for low-level drivers. Incorporating a device that does not support dzd will then cause the feature to be disabled in the stacking driver. Also ensure that the maximum discard value does not overflow when exported in sysfs and return 0 in the alignment and dzd fields for devices that don't support discard. Reported-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: add a non-queueable flush flagshaohua.li@intel.com2011-05-061-0/+6
| | | | | | | | | | | | | flush request isn't queueable in some drives. Add a flag to let driver notify block layer about this. We can optimize flush performance with the knowledge. Stable: 2.6.39 only Cc: stable@kernel.org Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Revert "block: add callback function for unplug notification"Jens Axboe2011-04-181-16/+0
| | | | | | | | | | | | | | | MD can't use this since it really requires us to be able to keep more than a single piece of state for the unplug. Commit 048c9374 added the required support for MD, so get rid of this now unused code. This reverts commit f75664570d8b75469cc468f23c2b27220984983b. Conflicts: block/blk-core.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: add callback function for unplug notificationJens Axboe2011-04-121-0/+16
| | | | | | | MD would like to know when a queue is unplugged, so it can flush it's bitmap writes. Add such a callback. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe2011-03-101-8/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * block: remove per-queue pluggingJens Axboe2011-03-101-8/+0
| | | | | | | | | | | | | | | | Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: Initialize ->queue_lock to internal lock at queue allocation timeVivek Goyal2011-03-021-7/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There does not seem to be a clear convention whether q->queue_lock is initialized or not when blk_cleanup_queue() is called. In the past it was not necessary but now blk_throtl_exit() takes up queue lock by default and needs queue lock to be available. In fact elevator_exit() code also has similar requirement just that it is less stringent in the sense that elevator_exit() is called only if elevator is initialized. Two problems have been noticed because of ambiguity about spin lock status. - If a driver calls blk_alloc_queue() and then soon calls blk_cleanup_queue() almost immediately, (because some other driver structure allocation failed or some other error happened) then blk_throtl_exit() will run into issues as queue lock is not initialized. Loop driver ran into this issue recently and I noticed error paths in md driver too. Similar error paths should exist in other drivers too. - If some driver provided external spin lock and zapped the lock before blk_cleanup_queue(), then it can lead to issues. So this patch initializes the default queue lock at queue allocation time. block throttling code is one of the users of queue lock and it is initialized at the queue allocation time, so it makes sense to initialize ->queue_lock also to internal lock. A driver can overide that lock later. This will take care of the issue where a driver does not have to worry about initializing the queue lock to default before calling blk_cleanup_queue() Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: max hardware sectors limit wrapperMike Snitzer2010-12-171-6/+20
| | | | | | | | | | | | | | | | | Implement blk_limits_max_hw_sectors() and make blk_queue_max_hw_sectors() a wrapper around it. DM needs this to avoid setting queue_limits' max_hw_sectors and max_sectors directly. dm_set_device_limits() now leverages blk_limits_max_hw_sectors() logic to establish the appropriate max_hw_sectors minimum (PAGE_SIZE). Fixes issue where DM was incorrectly setting max_sectors rather than max_hw_sectors (which caused dm_merge_bvec()'s max_hw_sectors check to be ineffective). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits insteadMartin K. Petersen2010-12-171-23/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When stacking devices, a request_queue is not always available. This forced us to have a no_cluster flag in the queue_limits that could be used as a carrier until the request_queue had been set up for a metadevice. There were several problems with that approach. First of all it was up to the stacking device to remember to set queue flag after stacking had completed. Also, the queue flag and the queue limits had to be kept in sync at all times. We got that wrong, which could lead to us issuing commands that went beyond the max scatterlist limit set by the driver. The proper fix is to avoid having two flags for tracking the same thing. We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the block layer merging functions. The queue_limit 'no_cluster' is turned into 'cluster' to avoid double negatives and to ease stacking. Clustering defaults to being enabled as before. The queue flag logic is removed from the stacking function, and explicitly setting the cluster flag is no longer necessary in DM and MD. Reported-by: Ed Lin <ed.lin@promise.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Merge branch 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-10-221-0/+20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits) xen-blkfront: disable barrier/flush write support Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c block: remove BLKDEV_IFL_WAIT aic7xxx_old: removed unused 'req' variable block: remove the BH_Eopnotsupp flag block: remove the BLKDEV_IFL_BARRIER flag block: remove the WRITE_BARRIER flag swap: do not send discards as barriers fat: do not send discards as barriers ext4: do not send discards as barriers jbd2: replace barriers with explicit flush / FUA usage jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier jbd: replace barriers with explicit flush / FUA usage nilfs2: replace barriers with explicit flush / FUA usage reiserfs: replace barriers with explicit flush / FUA usage gfs2: replace barriers with explicit flush / FUA usage btrfs: replace barriers with explicit flush / FUA usage xfs: replace barriers with explicit flush / FUA usage block: pass gfp_mask and flags to sb_issue_discard dm: convey that all flushes are processed as empty ...
| * block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()Tejun Heo2010-09-101-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with -EOPNOTSUPP and blk_queue_ordered() is replaced with simpler blk_queue_flush(). blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a device has write cache and can flush it, it should set REQ_FLUSH. If the device can handle FUA writes, it should also set REQ_FUA. All blk_queue_ordered() users are converted. * ORDERED_DRAIN is mapped to 0 which is the default value. * ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH. * ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: David S. Miller <davem@davemloft.net> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: Ensure physical block size is unsigned intMartin K. Petersen2010-10-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | Physical block size was declared unsigned int to accomodate the maximum size reported by READ CAPACITY(16). Make sure we use the right type in the related functions. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: set the bounce_pfn to the actual DMA limit rather than to max memoryMalahal Naineni2010-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The bounce_pfn of the request queue in 64 bit systems is set to the current max_low_pfn. Adding more memory later makes this incorrect. Memory allocated beyond this boot time max_low_pfn appear to require bounce buffers (bounce buffers are actually not allocated but used in calculating segments that may result in "over max segments limit" errors). Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: revert bad fix for memory hotplug causing bouncesJens Axboe2010-10-011-1/+3
| | | | | | | | | | | | | | | | Revert "block: set the bounce_pfn to the actual DMA limit rather than to max memory" This reverts commit c49825facfd4969585224a896a5e717f88450cad. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block: set the bounce_pfn to the actual DMA limit rather than to max memoryMalahal Naineni2010-09-241-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | The bounce_pfn of the request queue in 64 bit systems is set to the current max_low_pfn. Adding more memory later makes this incorrect. Memory allocated beyond this boot time max_low_pfn appear to require bounce buffers (bounce buffers are actually not allocated but used in calculating segments that may result in "over max segments limit" errors). Signed-off-by: Malahal Naineni <malahal@us.ibm.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | block/scsi: Provide a limit on the number of integrity segmentsMartin K. Petersen2010-09-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some controllers have a hardware limit on the number of protection information scatter-gather list segments they can handle. Introduce a max_integrity_segments limit in the block layer and provide a new scsi_host_template setting that allows HBA drivers to provide a value suitable for the hardware. Add support for honoring the integrity segment limit when merging both bios and requests. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
* | Consolidate min_not_zeroMartin K. Petersen2010-09-101-5/+0
|/ | | | | | | | We have several users of min_not_zero, each of them using their own definition. Move the define to kernel.h. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@carl.home.kernel.dk>
* block: implement an unprep function corresponding directly to prepJames Bottomley2010-08-071-0/+17
| | | | | | Reviewed-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-04-091-10/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits) cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch loop: Update mtime when writing using aops block: expose the statistics in blkio.time and blkio.sectors for the root cgroup backing-dev: Handle class_create() failure Block: Fix block/elevator.c elevator_get() off-by-one error drbd: lc_element_by_index() never returns NULL cciss: unlock on error path cfq-iosched: Do not merge queues of BE and IDLE classes cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging i2o: Remove the dangerous kobj_to_i2o_device macro block: remove 16 bytes of padding from struct request on 64bits cfq-iosched: fix a kbuild regression block: make CONFIG_BLK_CGROUP visible Remove GENHD_FL_DRIVERFS block: Export max number of segments and max segment size in sysfs block: Finalize conversion of block limits functions block: Fix overrun in lcm() and move it to lib vfs: improve writeback_inodes_wb() paride: fix off-by-one test drbd: fix al-to-on-disk-bitmap for 4k logical_block_size ...
| * block: Fix overrun in lcm() and move it to libMartin K. Petersen2010-03-151-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | lcm() was defined to take integer-sized arguments. The supplied arguments are multiplied, however, causing us to overflow given sufficiently large input. That in turn led to incorrect optimal I/O size reporting in some cases (RAID over RAID). Switch lcm() over to unsigned long similar to gcd() and move the function from blk-settings.c to lib. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* block: Consolidate phys_segment and hw_segment limitsMartin K. Petersen2010-02-261-47/+13
| | | | | | | | | Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen2010-02-261-4/+4
| | | | | | | | | | | | | The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Add BLK_ prefix to definitionsMartin K. Petersen2010-02-261-2/+2
| | | | | | | Add a BLK_ prefix to block layer constants. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Remove unused accessor functionMartin K. Petersen2010-02-261-9/+0
| | | | | | | | blk_queue_max_hw_sectors is no longer called by any subsystem and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Update blk_queue_max_sectors and documentationMartin K. Petersen2010-02-261-13/+17
| | | | | | | Clarify blk_queue_max_sectors and update documentation. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Stop using byte offsetsMartin K. Petersen2010-01-111-17/+9
| | | | | | | | | All callers of the stacking functions use 512-byte sector units rather than byte offsets. Simplify the code so the stacking functions take sectors when specifying data offsets. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: bdev_stack_limits wrapperMartin K. Petersen2010-01-111-0/+22
| | | | | | | | | | DM does not want to know about partition offsets. Add a partition-aware wrapper that DM can use when stacking block devices. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Correct handling of bottom device misaligmentMartin K. Petersen2010-01-111-4/+13
| | | | | | | | | | | | The top device misalignment flag would not be set if the added bottom device was already misaligned as opposed to causing a stacking failure. Also massage the reporting so that an error is only returned if adding the bottom device caused the misalignment. I.e. don't return an error if the top is already flagged as misaligned. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Fix incorrect alignment offset reporting and update documentationMartin K. Petersen2009-12-291-11/+33
| | | | | | | | | | | | | | | queue_sector_alignment_offset returned the wrong value which caused partitions to report an incorrect alignment_offset. Since offset alignment calculation is needed several places it has been split into a separate helper function. The topology stacking function has been updated accordingly. Furthermore, comments have been added to clarify how the stacking function works. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Fix topology stacking for data and discard alignmentMartin K. Petersen2009-12-211-37/+50
| | | | | | | | | | The stacking code incorrectly scaled up the data offset in some cases causing misaligned devices to report alignment. Rewrite the stacking algorithm to remedy this and apply the same alignment principles to the discard handling. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: temporarily disable discard granularityJens Axboe2009-12-161-0/+7
| | | | | | | | | | | | | Commit 86b37281411cf1e9bc0a6b5406c45edb7bd9ea5d adds a check for misaligned stacking offsets, but it's buggy since the defaults are 0. Hence all dm devices that pass in a non-zero starting offset will be marked as misaligned amd dm will complain. A real fix is coming, in the mean time disable the discard granularity check so that users don't worry about dm reporting about misaligned devices. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Allow devices to indicate whether discarded blocks are zeroedMartin K. Petersen2009-12-031-0/+2
| | | | | | | | | | | | | | | | The discard ioctl is used by mkfs utilities to clear a block device prior to putting metadata down. However, not all devices return zeroed blocks after a discard. Some drives return stale data, potentially containing old superblocks. It is therefore important to know whether discarded blocks are properly zeroed. Both ATA and SCSI drives have configuration bits that indicate whether zeroes are returned after a discard operation. Implement a block level interface that allows this information to be bubbled up the stack and queried via a new block device ioctl. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: jiffies fixesRandy Dunlap2009-11-111-1/+2
| | | | | | | | | Use HZ-independent calculation of milliseconds. Add jiffies.h where it was missing since functions or macros from it are used. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: Expose discard granularityMartin K. Petersen2009-11-101-10/+36
| | | | | | | | | | While SSDs track block usage on a per-sector basis, RAID arrays often have allocation blocks that are bigger. Allow the discard granularity and alignment to be set and teach the topology stacking logic how to handle them. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* blk-settings: fix function parameter kernel-doc notationRandy Dunlap2009-10-121-1/+1
| | | | | | | Fix kernel-doc notation in blk-settings.c::blk_queue_max_discard_sectors(). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: allow large discard requestsChristoph Hellwig2009-10-011-0/+13
| | | | | | | | | | | | | | | | Currently we set the bio size to the byte equivalent of the blocks to be trimmed when submitting the initial DISCARD ioctl. That means it is subject to the max_hw_sectors limitation of the HBA which is much lower than the size of a DISCARD request we can support. Add a separate max_discard_sectors tunable to limit the size for discard requests. We limit the max discard request size in bytes to 32bit as that is the limit for bio->bi_size. This could be much larger if we had a way to pass that information through the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: use normal I/O path for discard requestsChristoph Hellwig2009-10-011-17/+0
| | | | | | | | | | | | | | | | | | | | | | | | prepare_discard_fn() was being called in a place where memory allocation was effectively impossible. This makes it inappropriate for all but the most trivial translations of Linux's DISCARD operation to the block command set. Additionally adding a payload there makes the ownership of the bio backing unclear as it's now allocated by the device driver and not the submitter as usual. It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether the queue supports discard operations or not. blkdev_issue_discard now allocates a one-page, sector-length payload which is the right thing for the common ATA and SCSI implementations. The mtd implementation of prepare_discard_fn() is replaced with simply checking for the request being a discard. Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx> which did the prepare_discard_fn but not the different payload allocation yet. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
OpenPOWER on IntegriCloud