summaryrefslogtreecommitdiffstats
path: root/arch/x86/pci
Commit message (Collapse)AuthorAgeFilesLines
* x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS versionJonathan Nieder2012-03-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Carlos was getting WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52() when probing his sound card, and sound did not work. After adding pci=use_crs to the kernel command line, no more trouble. Ok, we can add a quirk. dmidecode output reveals that this is an MSI MS-7253, for which we already have a quirk, but the short-sighted author tied the quirk to a single BIOS version, making it not kick in on Carlos's machine with BIOS V1.2. If a later BIOS update makes it no longer necessary to look at the _CRS info it will still be harmless, so let's stop trying to guess which versions have and don't have accurate _CRS tables. Addresses https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5533 Also see <https://bugzilla.kernel.org/show_bug.cgi?id=42619>. Reported-by: Carlos Luna <caralu74@gmail.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: use host bridge _CRS info on MSI MS-7253Jonathan Nieder2012-02-281-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by default on a board that needs it. This fixes boot failures and oopses introduced in 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res"). The quirk is quite targetted (to a specific board and BIOS version) for two reasons: (1) to emphasize that this method of tackling the problem one quirk at a time is a little insane (2) to give BIOS vendors an opportunity to use simpler tables and allow us to return to generic behavior (whatever that happens to be) with a later BIOS update In other words, I am not at all happy with having quirks like this. But it is even worse for the kernel not to work out of the box on these machines, so... Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619 Reported-by: Svante Signell <svante.signell@telia.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix memleak when ACPI _CRS is not used.Yinghai Lu2012-02-231-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | warning: unreferenced object 0xffff8801f6914200 (size 512): comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s) hex dump (first 32 bytes): 00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00 `X/............. backtrace: [<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43 [<ffffffff8113764f>] __kmalloc+0x121/0x183 [<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6 [<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c [<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421 [<ffffffff81408f50>] acpi_device_probe+0x50/0x190 [<ffffffff8149edc7>] really_probe+0x99/0x126 [<ffffffff8149ef83>] driver_probe_device+0x3b/0x56 [<ffffffff8149effd>] __driver_attach+0x5f/0x82 [<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88 [<ffffffff8149eb87>] driver_attach+0x1e/0x20 [<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d [<ffffffff8149f47b>] driver_register+0x91/0xfe [<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45 [<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28 [<ffffffff810001e7>] do_one_initcall+0x57/0x134 The system has _CRS for root buses, but they are not used because the machine date is before the cutoff date for _CRS usage. Try to free those unused resource arrays and names. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callbackStefano Stabellini2012-02-031-1/+1
| | | | | | CC: stable@kernel.org #2.6.37 and onwards Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* x86/PCI: build amd_bus.o only when CONFIG_AMD_NB=yBjorn Helgaas2012-01-121-1/+2
| | | | | | | | | | | We only need amd_bus.o for AMD systems with PCI. arch/x86/pci/Makefile already depends on CONFIG_PCI=y, so this patch just adds the dependency on CONFIG_AMD_NB. Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org # 2.6.34+ (needs adjustment for k8 -> amd rename) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds2012-01-111-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel config: Fix the APB_TIMER selection x86/mrst: Add additional debug prints for pb_keys x86/intel config: Revamp configuration to allow for Moorestown and Medfield x86/intel/scu/ipc: Match the changes in the x86 configuration x86/apb: Fix configuration constraints x86: Fix INTEL_MID silly x86/Kconfig: Cyclone-timer depends on x86-summit x86: Reduce clock calibration time during slave cpu startup x86/config: Revamp configuration for MID devices x86/sfi: Kill the IRQ as id hack
| * x86/intel config: Revamp configuration to allow for Moorestown and MedfieldAlan Cox2011-12-181-1/+1
| | | | | | | | | | | | | | | | | | This sets all up the other bits that need to be INTEL_MID specific rather than Moorestown specific. Signed-off-by: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/20111217174318.7207.91543.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'linux-next' of ↵Linus Torvalds2012-01-118-116/+139
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
| * | x86/PCI: amd: factor out MMCONFIG discoveryBjorn Helgaas2012-01-061-31/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This factors out the AMD native MMCONFIG discovery so we can use it outside amd_bus.c. amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the PCI resources. We may also need the MMCONFIG information to work around BIOS defects in the ACPI MCFG table. Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: stable@kernel.org # 2.6.34+ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()Bjorn Helgaas2012-01-063-34/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | x86 has two kinds of PCI root bus scanning: (1) ACPI-based, using _CRS resources. This used pci_create_bus(), not pci_scan_bus(), because ACPI hotplug needed to split the pci_bus_add_devices() into a separate host bridge .start() method. This patch parses the _CRS resources earlier, so we can build a list of resources and pass it to pci_create_root_bus(). Note that as before, we parse the _CRS even if we aren't going to use it so we can print it for debugging purposes. (2) All other, which used either default resources (ioport_resource and iomem_resource) or information read from the hardware via amd_bus.c or similar. This used pci_scan_bus(). This patch converts x86_pci_root_bus_res_quirks() (previously called from pcibios_fixup_bus()) to x86_pci_root_bus_resources(), which builds a list of resources before we call pci_scan_root_bus(). We also use x86_pci_root_bus_resources() if we have ACPI but are ignoring _CRS. CC: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()Bjorn Helgaas2012-01-063-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This doesn't change any functionality, but it makes a subsequent patch slightly simpler. pci_scan_bus(NULL, ...) and pci_scan_bus_parented() are identical except that pci_scan_bus() also calls pci_bus_add_devices(): pci_scan_bus_parented pci_create_bus pci_scan_child_bus pci_scan_bus pci_create_bus pci_scan_child_bus pci_bus_add_devices All callers of pcibios_scan_root() call pci_bus_add_devices() explicitly, and we don't pass a parent device, so we might as well use pci_scan_bus(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: read Broadcom CNB20LE host bridge info before PCI scanBjorn Helgaas2012-01-061-23/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently read the CNB20LE aperture information in a PCI quirk, which happens after we've already created the root bus. This patch changes it to read the apertures earlier so we can create the root bus with the correct resources. I believe the CNB20LE lives at "pci 0000:00:00" based on https://lkml.org/lkml/2010/8/13/220 CC: Ira W. Snyder <iws@ovro.caltech.edu> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: amd: Kill misleading message about enablement of IO access to PCI ECS]Andreas Herrmann2012-01-061-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 24d9b70b8c679264756a6980e668b96b3f964826 (x86: Use PCI method for enabling AMD extended config space before MSR method) added a message when IO access to PCI ECS was enabled via access to the NB_CFG PCI register. This can lead to a bogus message like [ 0.365177] Extended Config Space enabled on 0 nodes which is misleading because IO ECS access is subsequently enabled for AMD CPUs (that support this) by modifying the corresponding NB_CFG MSR. Furthermore it's not "Extended Config Space" that is enabled by this register setting. It's the IO access that is enabled for extended configruation space. IMHO the ambiguous message needs to be cancelled. Cc: Jan Beulich <jbeulich@novell.com> Cc: Robert Richter <robert.richter@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: x86: use generic pcibios_set_master()Myron Stowe2012-01-061-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes x86's architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Pull PCI 'latency timer' setup up into the coreMyron Stowe2012-01-061-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'latency timer' of PCI devices, both Type 0 and Type 1, is setup in architecture-specific code [see: 'pcibios_set_master()']. There are two approaches being taken by all the architectures - check if the 'latency timer' is currently set between 16 and 255 and if not bring it within bounds, or, do nothing (and then there is the gratuitously different PA-RISC implementation). There is nothing architecture-specific about PCI's 'latency timer' so this patch pulls its setup functionality up into the PCI core by creating a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture-specific code. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: Ignore CPU non-addressable _CRS reserved memory resourcesGary Hade2012-01-061-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This assures that a _CRS reserved host bridge window or window region is not used if it is not addressable by the CPU. The new code either trims the window to exclude the non-addressable portion or totally ignores the window if the entire window is non-addressable. The current code has been shown to be problematic with 32-bit non-PAE kernels on systems where _CRS reserves resources above 4GB. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Renninger <trenn@novell.com> Cc: linux-kernel@vger.kernel.org Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Add Thinkpad SL510 to pci=nocrs blacklistDave Jones2012-01-061-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling CRS by default breaks suspend on the Thinkpad SL510. Details in https://bugzilla.redhat.com/show_bug.cgi?id=769657 Reported-by: Stefan Kirrmann <stefan.kirrmann@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Add Dell Studio 1557 to pci=nocrs blacklistDave Jones2012-01-061-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Dell Studio 1557 also doesn't suspend correctly when CRS is enabled. Details at https://bugzilla.redhat.com/show_bug.cgi?id=769657 Reported-by: Gregory S. Hoerner <ghoerner@transcendingthought.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: add set_nouse_crs for use by a pci=nocrs blacklistDave Jones2012-01-061-0/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some machines don't boot unless passed pci=nocrs. (See https://bugzilla.redhat.com/show_bug.cgi?id=770308 for details of one report. Waiting on dmidecode output for others). Currently there is a DMI whitelist, even though the default is on. v2: drop the 1536 blacklist entry, superceded by the PNP/MMCONFIG changes from Bjorn Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | typo fixes: aera -> area, exntension -> extensionWang YanQing2011-12-091-1/+1
|/ | | | | | | One printk and one comment typo fix. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* x86: Fix files explicitly requiring export.h for EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker2011-10-312-0/+2
| | | | | | | | | | | | | | | | These files were implicitly getting EXPORT_SYMBOL via device.h which was including module.h, but that will be fixed up shortly. By fixing these now, we can avoid seeing things like: arch/x86/kernel/rtc.c:29: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ arch/x86/kernel/pci-dma.c:20: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’ arch/x86/kernel/e820.c:69: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL_GPL’ [ with input from Randy Dunlap <rdunlap@xenotime.net> and also from Stephen Rothwell <sfr@canb.auug.org.au> ] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* Merge branch 'next-rebase' of ↵Linus Torvalds2011-10-288-12/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Clean-up MPS debug output pci: Clamp pcie_set_readrq() when using "performance" settings PCI: enable MPS "performance" setting to properly handle bridge MPS PCI: Workaround for Intel MPS errata PCI: Add support for PASID capability PCI: Add implementation for PRI capability PCI: Export ATS functions to modules PCI: Move ATS implementation into own file PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake() PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove PCI / PM: Extend PME polling to all PCI devices PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823 PCI: Make pci_setup_bridge() non-static for use by arch code x86: constify PCI raw ops structures PCI: Add quirk for known incorrect MPSS PCI: Add Solarflare vendor ID and SFC4000 device IDs
| * x86: constify PCI raw ops structuresJan Beulich2011-10-148-12/+12
| | | | | | | | | | | | | | | | | | | | | | As with any other such change, the goal is to prevent inadvertent writes to these structures (assuming DEBUG_RODATA is enabled), and to separate data (possibly frequently) written to from such never getting modified. Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| |
| \
| \
| \
*---. \ Merge branches 'stable/drivers-3.2', 'stable/drivers.bugfixes-3.2' and ↵Linus Torvalds2011-10-251-3/+19
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/drivers-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus: don't rely on xen_initial_domain to detect local xenstore xenbus: Fix loopback event channel assuming domain 0 xen/pv-on-hvm:kexec: Fix implicit declaration of function 'xen_hvm_domain' xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel xen/pv-on-hvm kexec: update xs_wire.h:xsd_sockmsg_type from xen-unstable xen/pv-on-hvm kexec+kdump: reset PV devices in kexec or crash kernel xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports xen/pv-on-hvm kexec: prevent crash in xenwatch_thread() when stale watch events arrive * 'stable/drivers.bugfixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pciback: Check if the device is found instead of blindly assuming so. xen/pciback: Do not dereference psdev during printk when it is NULL. xen: remove XEN_PLATFORM_PCI config option xen: XEN_PVHVM depends on PCI xen/pciback: double lock typo xen/pciback: use mutex rather than spinlock in vpci backend xen/pciback: Use mutexes when working with Xenbus state transitions. xen/pciback: miscellaneous adjustments xen/pciback: use mutex rather than spinlock in passthrough backend xen/pciback: use resource_size() * 'stable/pci.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: support multi-segment systems xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs. xen/pci: make bus notifier handler return sane values xen-swiotlb: fix printk and panic args xen-swiotlb: Fix wrong panic. xen-swiotlb: Retry up three times to allocate Xen-SWIOTLB xen-pcifront: Update warning comment to use 'e820_host' option.
| | | * | xen/pci: support multi-segment systemsJan Beulich2011-09-221-3/+19
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the hypercall interface changes are in -unstable, make the kernel side code not ignore the segment (aka domain) number anymore (which results in pretty odd behavior on such systems). Rather, if only the old interfaces are available, don't call them for devices on non-zero segments at all. Signed-off-by: Jan Beulich <jbeulich@suse.com> [v1: Edited git description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | | |
| \ \ \
*-. \ \ \ Merge branches 'stable/bug.fixes-3.2' and 'stable/mmu.fixes' of ↵Linus Torvalds2011-10-251-3/+7
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m/debugfs: Make type_name more obvious. xen/p2m/debugfs: Fix potential pointer exception. xen/enlighten: Fix compile warnings and set cx to known value. xen/xenbus: Remove the unnecessary check. xen/irq: If we fail during msi_capability_init return proper error code. xen/events: Don't check the info for NULL as it is already done. xen/events: BUG() when we can't allocate our event->irq array. * 'stable/mmu.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fix selfballooning and ensure it doesn't go too far xen/gntdev: Fix sleep-inside-spinlock xen: modify kernel mappings corresponding to granted pages xen: add an "highmem" parameter to alloc_xenballooned_pages xen/p2m: Use SetPagePrivate and its friends for M2P overrides. xen/p2m: Make debug/xen/mmu/p2m visible again. Revert "xen/debug: WARN_ON when identity PFN has no _PAGE_IOMAP flag set."
| * | | | xen/irq: If we fail during msi_capability_init return proper error code.Konrad Rzeszutek Wilk2011-10-191-3/+7
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | There are three different modes: PV, HVM, and initial domain 0. In all the cases we would return -1 for failure instead of a proper error code. Fix this by propagating the error code from the generic IRQ code. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | x86/PCI: use host bridge _CRS info on ASUS M2V-MX SEPaul Menzel2011-10-061-0/+11
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In summary, this DMI quirk uses the _CRS info by default for the ASUS M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN") whose commit message should be read for further information. Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res") Linux gives the following oops: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:20:01.0: setting latency timer to 64 BUG: unable to handle kernel paging request at ffffc90011c08000 IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173 Oops: 0009 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstate CPU 0 Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan] Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name RIP: 0010:[<ffffffffa0578402>] [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP: 0018:ffff88013153fe50 EFLAGS: 00010286 RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090 FS: 0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0) Stack: 0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400 ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8 ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232 Call Trace: [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186 [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92 [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b [<ffffffff8105fd3f>] ? kthread+0x7a/0x82 [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10 [<ffffffff8105fcc5>] ? kthread+0x0/0x82 [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10 Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be RIP [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP <ffff88013153fe50> CR2: ffffc90011c08000 ---[ end trace 8d1f3ebc136437fd ]--- Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem. $ dmesg | grep -i crs # with the quirk PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug The match has to be against the DMI board entries though since the vendor entries are not populated. DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304 10/30/2007 This quirk should be removed when `pci=use_crs` is enabled for machines from 2006 or earlier or some other solution is implemented. Using coreboot [1] with this board the problem does not exist but this quirk also does not affect it either. To be safe though the check is tightened to only take effect when the BIOS from American Megatrends is used. 15:13 < ruik> but coreboot does not need that 15:13 < ruik> because i have there only one root bus 15:13 < ruik> the audio is behind a bridge $ sudo dmidecode BIOS Information Vendor: American Megatrends Inc. Version: 0304 Release Date: 10/30/2007 [1] http://www.coreboot.org/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552 Cc: stable@kernel.org (2.6.34) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Fix pointer dereference before call to pcie_bus_configure_settingsShyam Iyer2011-09-091-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b03e7495a862 ("PCI: Set PCI-E Max Payload Size on fabric") introduced a potential NULL pointer dereference in calls to pcie_bus_configure_settings due to attempts to access pci_bus self variables when the self pointer is NULL. To correct this, verify that the self pointer in pci_bus is non-NULL before dereferencing it. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | PCI: Set PCI-E Max Payload Size on fabricJon Mason2011-08-011-0/+9
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a given PCI-E fabric, each device, bridge, and root port can have a different PCI-E maximum payload size. There is a sizable performance boost for having the largest possible maximum payload size on each PCI-E device. However, if improperly configured, fatal bus errors can occur. Thus, it is important to ensure that PCI-E payloads sends by a device are never larger than the MPS setting of all devices on the way to the destination. This can be achieved two ways: - A conservative approach is to use the smallest common denominator of the entire tree below a root complex for every device on that fabric. This means for example that having a 128 bytes MPS USB controller on one leg of a switch will dramatically reduce performances of a video card or 10GE adapter on another leg of that same switch. It also means that any hierarchy supporting hotplug slots (including expresscard or thunderbolt I suppose, dbl check that) will have to be entirely clamped to 128 bytes since we cannot predict what will be plugged into those slots, and we cannot change the MPS on a "live" system. - A more optimal way is possible, if it falls within a couple of constraints: * The top-level host bridge will never generate packets larger than the smallest TLP (or if it can be controlled independently from its MPS at least) * The device will never generate packets larger than MPS (which can be configured via MRRS) * No support of direct PCI-E <-> PCI-E transfers between devices without some additional code to specifically deal with that case Then we can use an approach that basically ignores downstream requests and focuses exclusively on upstream requests. In that case, all we need to care about is that a device MPS is no larger than its parent MPS, which allows us to keep all switches/bridges to the max MPS supported by their parent and eventually the PHB. In this case, your USB controller would no longer "starve" your 10GE Ethernet and your hotplug slots won't affect your global MPS. Additionally, the hotplugged devices themselves can be configured to a larger MPS up to the value configured in the hotplug bridge. To choose between the two available options, two PCI kernel boot args have been added to the PCI calls. "pcie_bus_safe" will provide the former behavior, while "pcie_bus_perf" will perform the latter behavior. By default, the latter behavior is used. NOTE: due to the location of the enablement, each arch will need to add calls to this function. This patch only enables x86. This patch includes a number of changes recommended by Benjamin Herrenschmidt. Tested-by: Jordan_Hargrave@dell.com Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | Merge branch 'linux-next' of ↵Linus Torvalds2011-07-298-14/+25
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: remove printks about disabled bridge windows PCI: fold pci_calc_resource_flags() into decode_bar() PCI: treat mem BAR type "11" (reserved) as 32-bit, not 64-bit, BAR PCI: correct pcie_set_readrq write size PCI: pciehp: change wait time for valid configuration access x86/PCI: Preserve existing pci=bfsort whitelist for Dell systems PCI: ARI is a PCIe v2 feature x86/PCI: quirks: Use pci_dev->revision PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. PCI hotplug: cpqphp: use pci_dev->vendor PCI hotplug: cpqphp: use pci_dev->subsystem_{vendor|device} x86/PCI: config space accessor functions should not ignore the segment argument PCI: Assign values to 'pci_obff_signal_type' enumeration constants x86/PCI: reduce severity of host bridge window conflict warnings PCI: enumerate the PCI device only removed out PCI hieratchy of OS when re-scanning PCI PCI: PCIe AER: add aer_recover_queue x86/PCI: select direct access mode for mmconfig option PCI hotplug: Rename is_ejectable which also exists in dock.c
| * | x86/PCI: Preserve existing pci=bfsort whitelist for Dell systemsNarendra_K@Dell.com2011-07-221-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6e8af08dfa40b747002207d3ce8e8b43a050d99f enables pci=bfsort on future Dell systems. But the identification string 'Dell System' matches on already existing whitelist, which do not have SMBIOS type 0xB1, causing pci=bfsort not being set on existing whitelist. This patch fixes the regression by moving the type 0xB1 check beyond the existing whitelist so that existing whitelist is walked before. Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.Ralf Baechle2011-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: "David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: Paul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: config space accessor functions should not ignore the segment argumentJan Beulich2011-07-225-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this change, the majority of the raw PCI config space access functions silently ignore a non-zero segment argument, which is certainly wrong. Apart from pci_direct_conf1, all other non-MMCFG access methods get used only for non-extended accesses (i.e. assigned to raw_pci_ops only). Consequently, with the way raw_pci_{read,write}() work, it would be a coding error to call these functions with a non-zero segment (with the current call flow this cannot happen afaict). The access method 1 accessor, as it can be used for extended accesses (on AMD systems) instead gets checks added for the passed in segment to be zero. This would be the case when on such a system having multiple PCI segments (don't know whether any exist in practice) MMCFG for some reason is not usable, and method 1 gets selected for doing extended accesses. Rather than accessing the wrong device's config space, the function will now error out. v2: Convert BUG_ON() to WARN_ON(), and extend description as per Ingo's request. Signed-off-by: Jan Beulich <jbeulich@novell.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | x86/PCI: reduce severity of host bridge window conflict warningsBjorn Helgaas2011-07-221-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Host bridge windows are top-level resources, so if we find a host bridge window conflict, it's probably with a hard-coded legacy reservation. Moving host bridge windows is theoretically possible, but we don't support it; we just ignore windows with conflicts, and it's not worth making this a user-visible error. Reported-and-tested-by: Jools Wills <jools@oxfordinspire.co.uk> References: https://bugzilla.kernel.org/show_bug.cgi?id=38522 Reported-by: Das <dasfox@gmail.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=16497 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds2011-07-221-1/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Correct UV2 BAU destination timeout x86, UV: Correct failed topology memory leak x86, UV: Remove cpumask_t from the stack x86, UV: Rename hubmask to pnmask x86, UV: Correct reset_with_ipi() x86, UV: Allow for non-consecutive sockets x86, UV: Inline header file functions x86, UV: Fix smp_processor_id() use in a preemptable region x66, UV: Enable 64-bit ACPI MFCG support for SGI UV2 platform x86, UV: Clean up uv_mmrs.h
| * | | x66, UV: Enable 64-bit ACPI MFCG support for SGI UV2 platformJack Steiner2011-06-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable 64-bit ACPI MFCG support for SGI UV2 platform. The check is similar to the check on UV1. UV2 has a different oem_id string. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110602195943.GA27079@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | | xen/pci: Use 'acpi_gsi_to_irq' value unconditionally.Konrad Rzeszutek Wilk2011-07-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past we would only use the function's value if the returned value was not equal to 'acpi_sci_override_gsi'. Meaning that the INT_SRV_OVR values for global and source irq were different. But it is OK to use the function's value even when the global and source irq are the same. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Remove 'xen_allocate_pirq_gsi'.Konrad Rzeszutek Wilk2011-07-111-25/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past (2.6.38) the 'xen_allocate_pirq_gsi' would allocate an entry in a Linux IRQ -> {XEN_IRQ, type, event, ..} array. All of that has been removed in 2.6.39 and the Xen IRQ subsystem uses an linked list that is populated when the call to 'xen_allocate_irq_gsi' (universally done from any of the xen_bind_* calls) is done. The 'xen_allocate_pirq_gsi' is a NOP and there is no need for it anymore so lets remove it. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Retire unnecessary #ifdef CONFIG_ACPIKonrad Rzeszutek Wilk2011-07-111-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the code paths that are guarded by CONFIG_XEN_DOM0 already depend on CONFIG_ACPI so the extra #ifdef is not required. The earlier patch that added them in had done its job. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Move the allocation of IRQs when there are no IOAPIC's to the endKonrad Rzeszutek Wilk2011-07-111-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | .. which means we can preset of NR_IRQS_LEGACY interrupts using the 'acpi_get_override_irq' API before this loop. This means that we can get the IRQ's polarity (and trigger) from either the ACPI (or MP); or use the default values. This fixes a bug if we did not have an IOAPIC we would not been able to preset the IRQ's polarity if the MP table existed. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Squash pci_xen_initial_domain and xen_setup_pirqs together.Konrad Rzeszutek Wilk2011-07-111-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since they are only called once and the rest of the pci_xen_* functions follow the same pattern of setup. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Use the xen_register_pirq for HVM and initial domain usersKonrad Rzeszutek Wilk2011-07-111-52/+23
| | | | | | | | | | | | | | | | | | | | | | | | .. to cut down on the code duplicity. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: In xen_register_pirq bind the GSI to the IRQ after the hypercall.Konrad Rzeszutek Wilk2011-07-111-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | Not before .. also that code segment starts looking like the HVM one. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Provide #ifdef CONFIG_ACPI to easy code squashing.Konrad Rzeszutek Wilk2011-07-111-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past we would guard those code segments to be dependent on CONFIG_XEN_DOM0 (which depends on CONFIG_ACPI) so this patch is not stricly necessary. But the next patch will merge common HVM and initial domain code and we want to make sure the CONFIG_ACPI dependency is preserved - as HVM code does not depend on CONFIG_XEN_DOM0. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Update comments and fix empty spaces.Konrad Rzeszutek Wilk2011-07-111-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the out-dated comment at the beginning of the file. Also provide the copyrights of folks who have been contributing to this code lately. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | | xen/pci: Shuffle code around.Konrad Rzeszutek Wilk2011-07-111-173/+173
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The file is hard to read. Move the code around so that the contents of it follows a uniform format: - setup GSIs - PV, HVM, and initial domain case - then MSI/MSI-x setup - PV, HVM and then initial domain case. - then MSI/MSI-x teardown - same order. - lastly, the __init functions in PV, HVM, and initial domain order. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | Merge branch 'stable/bug.fixes' of ↵Linus Torvalds2011-07-071-28/+28
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.
| * | xen/pci: Move check for acpi_sci_override_gsi to xen_setup_acpi_sci.Konrad Rzeszutek Wilk2011-07-071-28/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we would check for acpi_sci_override_gsi == gsi every time a PCI device was enabled. That works during early bootup, but later on it could lead to triggering unnecessarily the acpi_gsi_to_irq(..) lookup. The reason is that acpi_sci_override_gsi was declared in __initdata and after early bootup could contain bogus values. This patch moves the check for acpi_sci_override_gsi to the site where the ACPI SCI is preset. CC: stable@kernel.org Reported-by: Raghavendra D Prabhu <rprabhu@wnohang.net> Tested-by: Raghavendra D Prabhu <rprabhu@wnohang.net> [http://lists.xensource.com/archives/html/xen-devel/2011-07/msg00154.html] Suggested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | Merge branch 'stable/bug.fixes' of ↵Linus Torvalds2011-07-011-2/+24
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Use the INT_SRC_OVR IRQ (instead of GSI) to preset the ACPI SCI IRQ. xen/mmu: Fix for linker errors when CONFIG_SMP is not defined.
OpenPOWER on IntegriCloud