summaryrefslogtreecommitdiffstats
path: root/arch/x86/pci/common.c
Commit message (Collapse)AuthorAgeFilesLines
* x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows=?UTF-8?q?Christian=20K=C3=B6nig?=2018-01-111-0/+5
| | | | | | | | | | | | | | | | | | Only try to enable a 64-bit window on AMD CPUs when "pci=big_root_window" is specified. This taints the kernel because the new 64-bit window uses address space we don't know anything about, and it may contain unreported devices or memory that would conflict with the window. The pci_amd_enable_64bit_bar() quirk that enables the window is specific to AMD CPUs. The generic solution would be to have the firmware enable the window and describe it in the host bridge's _CRS method, or at least describe it in the _PRS method so the OS would have the option of enabling it. Signed-off-by: Christian König <christian.koenig@amd.com> [bhelgaas: changelog, extend doc, mention taint in dmesg] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
* x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use memremap() for RAM mappingsTom Lendacky2017-07-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ioremap() function is intended for mapping MMIO. For RAM, the memremap() function should be used. Convert calls from ioremap() to memremap() when re-mapping RAM. This will be used later by SME to control how the encryption mask is applied to memory mappings, with certain memory locations being mapped decrypted vs encrypted. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b13fccb9abbd547a7eef7b1fdfc223431b211c88.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge tag 'pci-v4.13-changes' of ↵Linus Torvalds2017-07-081-22/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
| * x86/PCI: Simplify Dell DMI B1 quirkJean Delvare2017-06-151-22/+5
| | | | | | | | | | | | | | | | No need for such convoluted code, when all we need is to call one function in one specific case. Tested-by: Narendra K <Narendra.K@dell.com> # DellEMC PowerEdge 1950, R730XD Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | x86/PCI: Select CONFIG_PCI_LOCKLESS_CONFIGThomas Gleixner2017-06-281-2/+2
|/ | | | | | | | | | | | | | | | | | All x86 PCI configuration space accessors have either their own serialization or can operate completely lockless (ECAM). Disable the global lock in the generic PCI configuration space accessors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/20170316215057.295079391@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86/PCI: Implement pcibios_release_device to release IRQ from IOAPICRui Wang2017-03-011-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The revert of 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") causes a problem for IOAPIC hotplug. The problem is that IRQs are allocated and freed in pci_enable_device() and pci_disable_device(). But there are some drivers which don't call pci_disable_device(), and they have good reasons not calling it, so if they're using IOAPIC their IRQs won't have a chance to be released from the IOAPIC. When this happens IOAPIC hot-removal fails with a kernel stack dump and an error message like this: [149335.697989] pin16 on IOAPIC2 is still in use. It turns out that we can fix it in a different way without moving IRQ allocation into pcibios_alloc_irq(), thus avoiding the regression of 991de2e59090. We can keep the allocation and freeing of IRQs as is within pci_enable_device()/pci_disable_device(), without breaking any previous assumption of the rest of the system, keeping compatibility with both the legacy and the modern drivers. We can accomplish this by implementing the existing __weak hook of pcibios_release_device() thus when a pci device is about to be deleted we get notified in the hook and take the chance to release its IRQ, if any, from the IOAPIC. Implement pcibios_release_device() for x86 to release any IRQ not released by the driver. Signed-off-by: Rui Wang <rui.y.wang@intel.com> Cc: tony.luck@intel.com Cc: linux-pci@vger.kernel.org Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: fengguang.wu@intel.com Cc: helgaas@kernel.org Cc: kbuild-all@01.org Cc: bhelgaas@google.com Link: http://lkml.kernel.org/r/1488288869-31290-2-git-send-email-rui.y.wang@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* treewide: Move dma_ops from struct dev_archdata into struct deviceBart Van Assche2017-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | Some but not all architectures provide set_dma_ops(). Move dma_ops from struct dev_archdata into struct device such that it becomes possible on all architectures to configure dma_ops per device. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Cc: x86@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
* x86/PCI: VMD: Request userspace control of PCIe hotplug indicatorsKeith Busch2016-09-231-0/+7
| | | | | | | | | | | | | | | | | | Add set_dev_domain_options() to set PCI domain-specific options as devices are added. The first usage is to request exclusive userspace control of PCIe hotplug indicators in VMD domains. Devices in a VMD domain use PCIe hotplug Attention and Power Indicators in a non-standard way; tell pciehp to ignore the indicators so userspace can control them via the sysfs "attention" file. To determine whether a bus is within a VMD domain, add a bool to the pci_sysdata structure that the VMD driver sets during initialization. [bhelgaas: changelog] Requested-by: Kapil Karkra <kapil.karkra@intel.com> Tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: Fix comment typoAndrea Gelmini2016-06-101-1/+1
| | | | | | | Fix typo. Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: Refine PCI support check in pcibios_init()Adrian-Ken Rueegsegger2016-04-111-1/+1
| | | | | | | | Also consider raw_pci_ext_ops when validating if a system has PCI support. This leads to proper resource allocation via pcibios_resource_survey() in the case where PCI config space is exclusively accessed through MMCONFIG. Signed-off-by: Adrian-Ken Rueegsegger <ken@codelabs.ch> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'pci-v4.6-changes' of ↵Linus Torvalds2016-03-161-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for v4.6: Enumeration: - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas) - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas Resource management: - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Don't assign or reassign immutable resources (Bjorn Helgaas) - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas) - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas) - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas) - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas) - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas) - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas) - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas) - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi) Virtualization: - Wait for up to 1000ms after FLR reset (Alex Williamson) - Support SR-IOV on any function type (Kelly Zytaruk) - Add ACS quirk for all Cavium devices (Manish Jaggi) AER: - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas) - Restore pci_ops pointer while calling original pci_ops (David Daney) - Fix aer_inject error codes (Jean Delvare) - Use dev_warn() in aer_inject (Jean Delvare) - Log actual error causes in aer_inject (Jean Delvare) - Log aer_inject error injections (Jean Delvare) VPD: - Prevent VPD access for buggy devices (Babu Moger) - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas) - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas) - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas) - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas) - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas) - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas) - Update VPD definitions (Hannes Reinecke) - Allow access to VPD attributes with size 0 (Hannes Reinecke) - Determine actual VPD size on first access (Hannes Reinecke) Generic host bridge driver: - Move structure definitions to separate header file (David Daney) - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney) - Expose pci_host_common_probe() for use by other drivers (David Daney) Altera host bridge driver: - Fix altera_pcie_link_is_up() (Ley Foon Tan) Cavium ThunderX host bridge driver: - Add PCIe host driver for ThunderX processors (David Daney) - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney) Freescale i.MX6 host bridge driver: - Add DT bindings to configure PHY Tx driver settings (Justin Waters) - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach) - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach) - Remove broken Gen2 workaround (Lucas Stach) - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach) Freescale Layerscape host bridge driver: - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi) Intel VMD host bridge driver: - Attach VMD resources to parent domain's resource tree (Jon Derrick) - Set bus resource start to 0 (Keith Busch) Microsoft Hyper-V host bridge driver: - Add fwnode_handle to x86 pci_sysdata (Jake Oshins) - Look up IRQ domain by fwnode_handle (Jake Oshins) - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins) NVIDIA Tegra host bridge driver: - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding) - Implement ->{add,remove}_bus() callbacks (Thierry Reding) - Remove unused struct tegra_pcie.num_ports field (Thierry Reding) - Track bus -> CPU mapping (Thierry Reding) - Remove misleading PHYS_OFFSET (Thierry Reding) Renesas R-Car host bridge driver: - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman) Synopsys DesignWare host bridge driver: - ARC: Add PCI support (Joao Pinto) - Add generic dw_pcie_wait_for_link() (Joao Pinto) - Add default link up check if sub-driver doesn't override (Joao Pinto) - Add driver for prototyping kits based on ARC SDP (Joao Pinto) TI Keystone host bridge driver: - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin) Xilinx AXI host bridge driver: - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada) - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada) - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada) - Update Zynq binding with Microblaze node (Bharat Kumar Gogada) - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada) Xilinx NWL host bridge driver: - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada) Miscellaneous: - Check device_attach() return value always (Bjorn Helgaas) - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas) - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas) - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas) - Remove includes of asm/pci-bridge.h (Bjorn Helgaas) - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas) - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas) - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler) - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas) - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa) - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig) - Move pci_dma_* helpers to common code (Christoph Hellwig) - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus) - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson) - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)" * tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition PCI: designware: Add driver for prototyping kits based on ARC SDP PCI: designware: Add default link up check if sub-driver doesn't override PCI: designware: Add generic dw_pcie_wait_for_link() PCI: Cleanup pci/pcie/Kconfig whitespace PCI: Simplify pci_create_attr() control flow PCI: Don't leak memory if sysfs_create_bin_file() fails PCI: Simplify sysfs ROM cleanup PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource MIPS: Loongson 3: Use temporary struct resource * to avoid repetition ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource ia64/PCI: Use ioremap() instead of open-coded equivalent ia64/PCI: Use temporary struct resource * to avoid repetition PCI: Clean up pci_map_rom() whitespace PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices PCI: thunder: Add PCIe host driver for ThunderX processors PCI: generic: Expose pci_host_common_probe() for use by other drivers PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe() ...
| * PCI: Remove includes of empty asm-generic/pci-bridge.hBjorn Helgaas2016-02-051-1/+0
| | | | | | | | | | | | | | include/asm-generic/pci-bridge.h is now empty, so remove every #include of it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Will Deacon <will.deacon@arm.com> (arm64)
* | Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"Bjorn Helgaas2016-02-271-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug. Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not v4.3 and bisected it to 991de2e59090. Sunjin reported that the RocketRAID 272x driver worked in v4.2 but not v4.3. In both cases booting with "pci=routirq" is a workaround. I think the problem is that after 991de2e59090, we no longer call pcibios_enable_irq() for upstream bridges. Prior to 991de2e59090, when a driver called pci_enable_device(), we recursively called pcibios_enable_irq() for upstream bridges via pci_enable_bridge(). After 991de2e59090, we call pcibios_enable_irq() from pci_device_probe() instead of the pci_enable_device() path, which does *not* call pcibios_enable_irq() for upstream bridges. Revert 991de2e59090 to fix these driver regressions. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Reported-and-tested-by: Олег Мороз <oleg.moroz@mcc.vniiem.ru> Reported-by: Sunjin Yang <fan4326@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com>
* | Revert "x86/PCI: Don't alloc pcibios-irq when MSI is enabled"Bjorn Helgaas2016-02-171-8/+0
|/ | | | | | | | | | | | | | | Revert 8affb487d4a4 ("x86/PCI: Don't alloc pcibios-irq when MSI is enabled"). This is part of reverting 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") to fix regressions it introduced. Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211 Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> CC: Jiang Liu <jiang.liu@linux.intel.com> CC: Joerg Roedel <jroedel@suse.de>
* x86/PCI: Allow DMA ops specific to a PCI domainKeith Busch2016-01-151-0/+38
| | | | | | | | | | | | | The Intel Volume Management Device (VMD) is a PCIe endpoint that acts as a host bridge to another PCI domain. When devices below the VMD perform DMA, the VMD replaces their DMA source IDs with its own source ID. Therefore, those devices require special DMA ops. Add interfaces to allow the VMD driver to set up dma_ops for the devices below it. [bhelgaas: remove "extern", add "static", changelog] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge tag 'pci-v4.4-changes' of ↵Linus Torvalds2015-11-061-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Add support for Enhanced Allocation devices (Sean O. Stalley) - Add Enhanced Allocation register entries (Sean O. Stalley) - Handle IORESOURCE_PCI_FIXED when sizing resources (David Daney) - Handle IORESOURCE_PCI_FIXED when assigning resources (David Daney) - Handle Enhanced Allocation capability for SR-IOV devices (David Daney) - Clear IORESOURCE_UNSET when reverting to firmware-assigned address (Bjorn Helgaas) - Make Enhanced Allocation bitmasks more obvious (Bjorn Helgaas) - Expand Enhanced Allocation BAR output (Bjorn Helgaas) - Add of_pci_check_probe_only to parse "linux,pci-probe-only" (Marc Zyngier) - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Add sparc mem64 resource parsing for root bus (Yinghai Lu) PCI device hotplug: - pciehp: Queue power work requests in dedicated function (Guenter Roeck) Driver binding: - Add builtin_pci_driver() to avoid registration boilerplate (Paul Gortmaker) Virtualization: - Set SR-IOV NumVFs to zero after enumeration (Alexander Duyck) - Remove redundant validation of SR-IOV offset/stride registers (Alexander Duyck) - Remove VFs in reverse order if virtfn_add() fails (Alexander Duyck) - Reorder pcibios_sriov_disable() (Alexander Duyck) - Wait 1 second between disabling VFs and clearing NumVFs (Alexander Duyck) - Fix sriov_enable() error path for pcibios_enable_sriov() failures (Alexander Duyck) - Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs (Ben Shelton) - Don't try to restore VF BARs (Wei Yang) MSI: - Don't alloc pcibios-irq when MSI is enabled (Joerg Roedel) - Add msi_controller setup_irqs() method for special multivector setup (Lucas Stach) - Export all remapped MSIs to sysfs attributes (Romain Bezut) - Disable MSI on SiS 761 (Ondrej Zary) AER: - Clear error status registers during enumeration and restore (Taku Izumi) Generic host bridge driver: - Fix lookup of linux,pci-probe-only property (Marc Zyngier) - Allow multiple hosts with different map_bus() methods (David Daney) - Pass starting bus number to pci_scan_root_bus() (David Daney) - Fix address window calculation for non-zero starting bus (David Daney) Altera host bridge driver: - Add msi.h to ARM Kbuild (Ley Foon Tan) - Add Altera PCIe host controller driver (Ley Foon Tan) - Add Altera PCIe MSI driver (Ley Foon Tan) APM X-Gene host bridge driver: - Remove msi_controller assignment (Duc Dang) Broadcom iProc host bridge driver: - Fix header comment "Corporation" misspelling (Florian Fainelli) - Fix code comment to match code (Ray Jui) - Remove unused struct iproc_pcie.irqs[] (Ray Jui) - Call pci_fixup_irqs() for ARM64 as well as ARM (Ray Jui) - Fix PCIe reset logic (Ray Jui) - Improve link detection logic (Ray Jui) - Update PCIe device tree bindings (Ray Jui) - Add outbound mapping support (Ray Jui) Freescale i.MX6 host bridge driver: - Return real error code from imx6_add_pcie_port() (Fabio Estevam) - Add PCIE_PHY_RX_ASIC_OUT_VALID definition (Fabio Estevam) Freescale Layerscape host bridge driver: - Remove ls_pcie_establish_link() (Minghuan Lian) - Ignore PCIe controllers in Endpoint mode (Minghuan Lian) - Factor out SCFG related function (Minghuan Lian) - Update ls_add_pcie_port() (Minghuan Lian) - Remove unused fields from struct ls_pcie (Minghuan Lian) - Add support for LS1043a and LS2080a (Minghuan Lian) - Add ls_pcie_msi_host_init() (Minghuan Lian) HiSilicon host bridge driver: - Add HiSilicon SoC Hip05 PCIe driver (Zhou Wang) Marvell MVEBU host bridge driver: - Return zero for reserved or unimplemented config space (Russell King) - Use exact config access size; don't read/modify/write (Russell King) - Use of_get_available_child_count() (Russell King) - Use for_each_available_child_of_node() to walk child nodes (Russell King) - Report full node name when reporting a DT error (Russell King) - Use port->name rather than "PCIe%d.%d" (Russell King) - Move port parsing and resource claiming to separate function (Russell King) - Fix memory leaks and refcount leaks (Russell King) - Split port parsing and resource claiming from port setup (Russell King) - Use gpio_set_value_cansleep() (Russell King) - Use devm_kcalloc() to allocate an array (Russell King) - Use gpio_desc to carry around gpio (Russell King) - Improve clock/reset handling (Russell King) - Add PCI Express root complex capability block (Russell King) - Remove code restricting accesses to slot 0 (Russell King) NVIDIA Tegra host bridge driver: - Wrap static pgprot_t initializer with __pgprot() (Ard Biesheuvel) Renesas R-Car host bridge driver: - Build pci-rcar-gen2.c only on ARM (Geert Uytterhoeven) - Build pcie-rcar.c only on ARM (Geert Uytterhoeven) - Make PCI aware of the I/O resources (Phil Edworthy) - Remove dependency on ARM-specific struct hw_pci (Phil Edworthy) - Set root bus nr to that provided in DT (Phil Edworthy) - Fix I/O offset for multiple host bridges (Phil Edworthy) ST Microelectronics SPEAr13xx host bridge driver: - Fix dw_pcie_cfg_read/write() usage (Gabriele Paoloni) Synopsys DesignWare host bridge driver: - Make "clocks" and "clock-names" optional DT properties (Bhupesh Sharma) - Use exact access size in dw_pcie_cfg_read() (Gabriele Paoloni) - Simplify dw_pcie_cfg_read/write() interfaces (Gabriele Paoloni) - Require config accesses to be naturally aligned (Gabriele Paoloni) - Make "num-lanes" an optional DT property (Gabriele Paoloni) - Move calculation of bus addresses to DRA7xx (Gabriele Paoloni) - Replace ARM pci_sys_data->align_resource with global function pointer (Gabriele Paoloni) - Factor out MSI msg setup (Lucas Stach) - Implement multivector MSI IRQ setup (Lucas Stach) - Make get_msi_addr() return phys_addr_t, not u32 (Lucas Stach) - Set up high part of MSI target address (Lucas Stach) - Fix PORT_LOGIC_LINK_WIDTH_MASK (Zhou Wang) - Revert "PCI: designware: Program ATU with untranslated address" (Zhou Wang) - Use of_pci_get_host_bridge_resources() to parse DT (Zhou Wang) - Make driver arch-agnostic (Zhou Wang) Miscellaneous: - Make x86 pci_subsys_init() static (Alexander Kuleshov) - Turn off Request Attributes to avoid Chelsio T5 Completion erratum (Hariprasad Shenai)" * tag 'pci-v4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) PCI: altera: Add Altera PCIe MSI driver PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver PCI: layerscape: Add ls_pcie_msi_host_init() PCI: layerscape: Add support for LS1043a and LS2080a PCI: layerscape: Remove unused fields from struct ls_pcie PCI: layerscape: Update ls_add_pcie_port() PCI: layerscape: Factor out SCFG related function PCI: layerscape: Ignore PCIe controllers in Endpoint mode PCI: layerscape: Remove ls_pcie_establish_link() PCI: designware: Make "clocks" and "clock-names" optional DT properties PCI: designware: Make driver arch-agnostic ARM/PCI: Replace pci_sys_data->align_resource with global function pointer PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT Revert "PCI: designware: Program ATU with untranslated address" PCI: designware: Move calculation of bus addresses to DRA7xx PCI: designware: Make "num-lanes" an optional DT property PCI: designware: Require config accesses to be naturally aligned PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces PCI: designware: Use exact access size in dw_pcie_cfg_read() PCI: spear: Fix dw_pcie_cfg_read/write() usage ...
| * x86/PCI: Don't alloc pcibios-irq when MSI is enabledJoerg Roedel2015-10-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pcibios-irq and MSI both use dev->irq to store the IRQ number. While the MSI code checks for that and frees the pcibios-irq before overwriting dev->irq, the pcibios_alloc_irq() function does not. Usually this is not a problem, as the pcibios-irq is allocated before probe time of the device and the MSI IRQ is allocted from the driver's probe path. But there are PCI devices handled by the core kernel and not by a standard PCI driver, like the AMD IOMMU for example. For the AMD IOMMU a normal PCI device driver does not make sense, because a driver can be forcibly unbound from its device, which is not a good idea for an IOMMU. Nevertheless the PCI core code tries to match the PCI device implementing the AMD IOMMU against drivers, and allocates/frees a pcibios IRQ every time it tries out a new driver. This overwrites the dev->irq field set by pci_enable_msi() and sets it to 0 in the end (because the probe fails and the pcibios-irq is freed again). On suspend/resume this breaks the kernel, because the IRQ descriptor for IRQ 0 is NULL. Fix this by not allocating a pcibios-irq when MSI is already active. This also has the benefit, that a device claimed by the core kernel can not be probed by a PCI driver later. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com>
* | PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"Bjorn Helgaas2015-09-151-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes <oe5hpm@gmail.com> Reported-by: Ray Jui <rjui@broadcom.com> Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
*-. Merge branches 'pci/irq', 'pci/misc', 'pci/resource' and ↵Bjorn Helgaas2015-08-041-12/+9
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'pci/virtualization' into next * pci/irq: PCI/MSI: Free legacy IRQ when enabling MSI/MSI-X PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq() PCI: Add pcibios_alloc_irq() and pcibios_free_irq() * pci/misc: PCI: Remove unused "pci_probe" flags PCI: Add VPD function 0 quirk for Intel Ethernet devices PCI: Add dev_flags bit to access VPD through function 0 PCI / ACPI: Fix pci_acpi_optimize_delay() comment PCI: Remove a broken link in quirks.c PCI: Remove useless redundant code PCI: Simplify pci_find_(ext_)capability() return value checks PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirks PCI: Add pcie_downstream_port() (true for Root and Switch Downstream Ports) PCI: Fix pcie_port_device_resume() comment PCI: Shift PCI_CLASS_NOT_DEFINED consistently with other classes PCI: Revert aeb30016fec3 ("PCI: add Intel USB specific reset method") PCI: Fix TI816X class code quirk PCI: Fix generic NCR 53c810 class code quirk PCI: Use PCI_CLASS_SERIAL_USB instead of bare number PCI: Add quirk for Intersil/Techwell TW686[4589] AV capture cards PCI: Remove Intel Cherrytrail D3 delays * pci/resource: PCI: Call pci_read_bridge_bases() from core instead of arch code * pci/virtualization: PCI: Restore ACS configuration as part of pci_restore_state()
| | * PCI: Call pci_read_bridge_bases() from core instead of arch codeLorenzo Pieralisi2015-07-231-1/+0
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we scan a PCI bus, we read PCI-PCI bridge window registers with pci_read_bridge_bases() so we can validate the resource hierarchy. Most architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but PCI-PCI bridges are not arch-specific, so this doesn't need to be in arch-specific code. Call pci_read_bridge_bases() directly from the PCI core instead of from arch code. For alpha and mips, we now call pci_read_bridge_bases() always; previously we only called it if PCI_PROBE_ONLY was set. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: James E.J. Bottomley <jejb@parisc-linux.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: David Howells <dhowells@redhat.com> CC: Russell King <linux@arm.linux.org.uk> CC: Tony Luck <tony.luck@intel.com> CC: David S. Miller <davem@davemloft.net> CC: Ingo Molnar <mingo@redhat.com> CC: Guenter Roeck <linux@roeck-us.net> CC: Michal Simek <monstr@monstr.eu> CC: Chris Zankel <chris@zankel.net>
| * PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()Jiang Liu2015-07-301-11/+9
|/ | | | | | | | | | | | | | To support IOAPIC hotplug, we need to allocate PCI IRQ resources on demand and free them when not used anymore. Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically allocate and free PCI IRQs. Remove mp_should_keep_irq(), which is no longer used. [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
* Merge tag 'pci-v4.1-changes' of ↵Linus Torvalds2015-04-131-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
| * PCI: Assign resources before drivers claim devices (pci_scan_root_bus())Yijing Wang2015-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, pci_scan_root_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_root_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_root_bus() and do it after any resource assignment in the callers. Note that ARM's pci_common_init_dev() already called pci_bus_add_devices() after pci_scan_root_bus(), so we only need to remove the first call: pci_common_init_dev pcibios_init_hw pci_scan_root_bus pci_bus_add_devices # first call pci_bus_assign_resources pci_bus_add_devices # second call [bhelgaas: changelog, drop "root_bus" var in alpha common_init_pci(), return failure earlier in mn10300, add "return" in x86 pcibios_scan_root(), return early if xtensa platform_pcibios_fixup() fails] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com> CC: David Howells <dhowells@redhat.com> CC: Tony Luck <tony.luck@intel.com> CC: Michal Simek <monstr@monstr.eu> CC: Ralf Baechle <ralf@linux-mips.org> CC: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: Chris Metcalf <cmetcalf@ezchip.com> CC: Chris Zankel <chris@zankel.net> CC: Max Filippov <jcmvbkbc@gmail.com> CC: Thomas Gleixner <tglx@linutronix.de>
* | Revert "x86/PCI: Refine the way to release PCI IRQ resources"Rafael J. Wysocki2015-03-201-28/+6
|/ | | | | | | | | | | | | | | | | | | | | | Commit b4b55cda5874 (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda5874 and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* Merge branch 'acpi-resources'Rafael J. Wysocki2015-02-101-6/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * acpi-resources: (23 commits) Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug x86/PCI: Refine the way to release PCI IRQ resources x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation x86/PCI: Fix the range check for IO resources PCI: Use common resource list management code instead of private implementation resources: Move struct resource_list_entry from ACPI into resource core ACPI: Introduce helper function acpi_dev_filter_resource_type() ACPI: Add field offset to struct resource_list_entry ACPI: Translate resource into master side address for bridge window resources ACPI: Return translation offset when parsing ACPI address space resources ACPI: Enforce stricter checks for address space descriptors ACPI: Set flag IORESOURCE_UNSET for unassigned resources ACPI: Normalize return value of resource parser functions ACPI: Fix a bug in parsing ACPI Memory24 resource ACPI: Add prefetch decoding to the address space parser ACPI: Move the window flag logic to the combined parser ACPI: Unify the parsing of address_space and ext_address_space ACPI: Let the parser return false for disabled resources ...
| * x86/PCI: Refine the way to release PCI IRQ resourcesJiang Liu2015-02-051-6/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI device drivers assume that pci_dev->irq won't change after calling pci_disable_device() and pci_enable_device() during suspend and resume. Commit c03b3b0738a5 ("x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled") frees PCI IRQ resources when pci_disable_device() is called and reallocate IRQ resources when pci_enable_device() is called again. This breaks above assumption. So commit 3eec595235c1 ("x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation") and 9eabc99a635a ("x86, irq, PCI: Keep IRQ assignment for runtime power management") fix the issue by avoiding freeing/reallocating IRQ resources during PCI device suspend/resume. They achieve this by checking dev.power.is_prepared and dev.power.runtime_status. PM maintainer, Rafael, then pointed out that it's really an ugly fix which leaking PM internal state information to IRQ subsystem. Recently David Vrabel <david.vrabel@citrix.com> also reports an regression in pciback driver caused by commit cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count"). Please refer to: http://lkml.org/lkml/2015/1/14/546 So this patch refine the way to release PCI IRQ resources. Instead of releasing PCI IRQ resources in pci_disable_device()/ pcibios_disable_device(), we now release it at driver unbinding notification BUS_NOTIFY_UNBOUND_DRIVER. In other word, we only release PCI IRQ resources when there's no driver bound to the PCI device, and it keeps the assumption that pci_dev->irq won't through multiple invocation of pci_enable_device()/pci_disable_device(). Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | PCI: Add NEC variants to Stratus ftServer PCIe DMI checkCharlotte Richardson2015-02-021-0/+16
|/ | | | | | | | | | | | NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f8ff6 ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by: Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+ CC: Myron Stowe <myron.stowe@redhat.com>
* x86/PCI: Mark DMI tables as initialization dataMathias Krause2014-09-221-10/+10
| | | | | | | | | | | | The DMI tables are only used in __init code, thereby can be marked as initialization data, too. The same is true for the callback functions referenced from the DMI tables. This moves ~9.6 kB of code and r/o data to the init sections, marking the memory for release after initialization. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'x86-nuke-platforms-for-linus' of ↵Linus Torvalds2014-04-021-4/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000
| * x86, platforms: Remove SGI Visual WorkstationH. Peter Anvin2014-02-271-4/+1
| | | | | | | | | | | | | | | | | | | | The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin <pazke@donpac.ru> Cc: Michael Reed <mdr@sgi.com> Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | x86/PCI: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node()Bjorn Helgaas2014-02-031-69/+0
| | | | | | | | | | | | | | | | There are no callers of get_mp_bus_to_node(), so we no longer need mp_bus_to_node[], get_mp_bus_to_node(), or set_mp_bus_to_node(). This removes them. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | x86/PCI: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node()Bjorn Helgaas2014-02-031-1/+1
| | | | | | | | | | | | | | | | | | This replaces all uses of get_mp_bus_to_node() with x86_pci_root_bus_node(). I think these uses are all on root buses, except possibly for blind probing, where NUMA node information is unimportant. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | x86/PCI: Drop return value of pcibios_scan_root()Bjorn Helgaas2014-02-031-4/+2
| | | | | | | | | | | | | | | | Nobody really uses the return value of pcibios_scan_root() (one place uses it to control a printk, but the printk is not very useful). This converts pcibios_scan_root() to a void function. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | x86/PCI: Merge pci_scan_bus_on_node() into pcibios_scan_root()Bjorn Helgaas2014-02-031-30/+19
| | | | | | | | | | | | | | | | pci_scan_bus_on_node() is only called by pcibios_scan_root(). This merges pci_scan_bus_on_node() into pcibios_scan_root() and removes pci_scan_bus_on_node(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | x86/PCI: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata()Bjorn Helgaas2014-02-031-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_scan_bus_with_sysdata() and pcibios_scan_root() are quite similar: pci_scan_bus_with_sysdata pci_scan_bus_on_node(..., &pci_root_ops, -1) pcibios_scan_root pci_scan_bus_on_node(..., &pci_root_ops, get_mp_bus_to_node(busnum)) get_mp_bus_to_node() returns -1 if it couldn't find the node number, so this removes pci_scan_bus_with_sysdata() and uses pcibios_scan_root() instead. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | x86/PCI: Drop pcibios_scan_root() check for bus already scannedBjorn Helgaas2014-02-031-9/+0
|/ | | | | | | | | | | | | | | | | The PCI core checks to see whether we've already scanned a bus, so we don't need to do it in pcibios_scan_root(). Here's where it happens in the core: pcibios_scan_root pci_scan_bus_on_node pci_scan_root_bus pci_create_root_bus b2 = pci_find_bus(pci_domain_nr(b), bus) if (b2) goto err_out; # already scanned this bus This removes the check from pcibios_scan_root(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* x86/PCI: Map PCI setup data with ioremap() so it can be in highmemMatt Fleming2013-06-051-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f9a37be0f0 ("x86: Use PCI setup data") added support for using PCI ROM images from setup_data. This used phys_to_virt(), which is not valid for highmem addresses, and can cause a crash when booting a 32-bit kernel via the EFI boot stub. pcibios_add_device() assumes that the physical addresses stored in setup_data are accessible via the direct kernel mapping, and that calling phys_to_virt() is valid. This isn't guaranteed to be true on x86 where the direct mapping range is much smaller than on x86-64. Calling phys_to_virt() on a highmem address results in the following: BUG: unable to handle kernel paging request at 39a3c198 IP: [<c262be0f>] pcibios_add_device+0x2f/0x90 ... Call Trace: [<c2370c73>] pci_device_add+0xe3/0x130 [<c274640b>] pci_scan_single_device+0x8b/0xb0 [<c2370d08>] pci_scan_slot+0x48/0x100 [<c2371904>] pci_scan_child_bus+0x24/0xc0 [<c262a7b0>] pci_acpi_scan_root+0x2c0/0x490 [<c23b7203>] acpi_pci_root_add+0x312/0x42f ... The solution is to use ioremap() instead of phys_to_virt() to map the setup data into the kernel address space. [bhelgaas: changelog] Tested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org # v3.8+
* x86/PCI: Implement pcibios_{add|remove}_bus() hooksJiang Liu2013-04-121-0/+11
| | | | | | | | | | | | | | Implement pcibios_{add|remove}_bus() hooks for x86 platforms. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Myron Stowe <myron.stowe@redhat.com>
* Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds2013-02-251-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
| * x86/PCI: Remove unused pci_root_busBjorn Helgaas2013-01-031-1/+0
| | | | | | | | | | pci_root_bus is unused, so remove all references to it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | X86: drivers: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-13/+13
|/ | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)Myron Stowe2012-12-261-1/+2
| | | | | | | | | | | | | | | | Commit 284f5f9 was intended to disable the "only_one_child()" optimization on Stratus ftServer systems, but its DMI check is wrong. It looks for DMI_SYS_VENDOR that contains "ftServer", when it should look for DMI_SYS_VENDOR containing "Stratus" and DMI_PRODUCT_NAME containing "ftServer". Tested on Stratus ftServer 6400. Reported-by: Fadeeva Marina <astarta@rat.ru> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+
* Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas2012-12-101-2/+2
|\ | | | | | | | | * pci/mjg-pci-roms-from-efi: PCI: Use phys_addr_t for physical ROM address
| * PCI: Use phys_addr_t for physical ROM addressBjorn Helgaas2012-12-101-2/+2
| | | | | | | | | | | | | | Use phys_addr_t rather than "void *" for physical memory address. This removes casts and fixes a "cast from pointer to integer of different size" warning on ppc44x_defconfig. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas2012-12-061-0/+30
|\ \ | |/ | | | | | | | | | | | | * pci/mjg-pci-roms-from-efi: x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR
| * x86: Use PCI setup dataMatthew Garrett2012-12-051-0/+30
| | | | | | | | | | | | | | | | | | | | | | EFI can provide PCI ROMs out of band via boot services, which may not be available after boot. Add support for using the data handed off to us by the boot stub or bootloader. [bhelgaas: added Seth's boot_params section mismatch fix] [bhelgaas: drop "boot_params.hdr.version < 0x0209" test] Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
* | PCI: Don't pass pci_dev to pci_ext_cfg_avail()Taku Izumi2012-11-071-1/+1
|/ | | | | | | | | pci_ext_cfg_avail() doesn't use the "struct pci_dev *" passed to it, and there's no requirement that a host bridge even be represented by a pci_dev. This drops the pci_ext_cfg_avail() parameter. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: adjust section annotations for pcibios_setup()Myron Stowe2012-07-051-1/+1
| | | | | | Make pcibios_setup() consistently use the "__init" section annotation. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branch 'topic/stratus' into nextBjorn Helgaas2012-05-071-0/+16
|\
| * PCI: work around Stratus ftServer broken PCIe hierarchyBjorn Helgaas2012-04-301-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A PCIe downstream port is a P2P bridge. Its secondary interface is a link that should lead only to device 0 (unless ARI is enabled)[1], so we don't probe for non-zero device numbers. Some Stratus ftServer systems have a PCIe downstream port (02:00.0) that leads to both an upstream port (03:00.0) and a downstream port (03:01.0), and 03:01.0 has important devices below it: [0000:02]-+-00.0-[03-3c]--+-00.0-[04-09]--... \-01.0-[0a-0d]--+-[USB] +-[NIC] +-... Previously, we didn't enumerate device 03:01.0, so USB and the network didn't work. This patch adds a DMI quirk to scan all device numbers, not just 0, below a downstream port. Based on a patch by Prarit Bhargava. [1] PCIe spec r3.0, sec 7.3.1 CC: Myron Stowe <mstowe@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: James Paradis <james.paradis@stratus.com> CC: Matthew Wilcox <matthew.r.wilcox@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
OpenPOWER on IntegriCloud