summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/i8253.c
Commit message (Collapse)AuthorAgeFilesLines
* x86/kernel: Audit and remove any unnecessary uses of module.hPaul Gortmaker2016-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Note that some bool/obj-y instances remain since module.h is the header for some exception table entry stuff, and for things like __init_or_module (code that is tossed when MODULES=n). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* clockevents/drivers/i8253: Migrate to new 'set-state' interfaceViresh Kumar2015-08-101-1/+1
| | | | | | | | | | | | | Migrate i8253 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* x86: Use common i8253 clockeventThomas Gleixner2011-07-011-90/+3
| | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20110609130622.026152527@linutronix.de
* x86: i8253: Consolidate definitions of global_clock_eventRalf Baechle2011-06-091-0/+1
| | | | | | | | | | | | There are multiple declarations of global_clock_event in header files specific to particular clock event implementations. Consolidate them in <asm/time.h> and make sure all users include that header. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Venkatesh Pallipadi (Venki) <venki@google.com> Link: http://lkml.kernel.org/r/20110601180610.762763451@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* i8253: Consolidate all kernel definitions of i8253_lockRalf Baechle2011-06-091-3/+0
| | | | | | | | | | | | | | Move them to drivers/clocksource/i8253.c and remove the implementations in arch/ [ tglx: Avoid the extra file in lib - folded arch patches in. The export will become conditional in a later step ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/20110601180610.221426078@duck.linux-mips.net Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* i8253: Create linux/i8253.h and use it in all 8253 related filesRalf Baechle2011-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> arch/arm/mach-footbridge/isa-timer.c | 2 +- arch/mips/cobalt/time.c | 2 +- arch/mips/jazz/irq.c | 2 +- arch/mips/kernel/i8253.c | 2 +- arch/mips/mti-malta/malta-time.c | 2 +- arch/mips/sgi-ip22/ip22-time.c | 2 +- arch/mips/sni/time.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apm_32.c | 2 +- arch/x86/kernel/hpet.c | 2 +- arch/x86/kernel/i8253.c | 2 +- arch/x86/kernel/time.c | 2 +- drivers/block/hd.c | 2 +- drivers/clocksource/i8253.c | 2 +- drivers/input/gameport/gameport.c | 2 +- drivers/input/joystick/analog.c | 2 +- drivers/input/misc/pcspkr.c | 2 +- include/linux/i8253.h | 11 +++++++++++ sound/drivers/pcsp/pcsp.h | 2 +- 19 files changed, 29 insertions(+), 18 deletions(-)
* x86: Convert PIT to clockevents_config_and_register()Thomas Gleixner2011-05-191-5/+1
| | | | | | | | | Let the core do the work. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Reviewed-by: Ingo Molnar <mingo@elte.hu> Link: http://lkml.kernel.org/r/%3C20110518210136.545615675%40linutronix.de%3E
* Merge branch 'consolidate-clksrc-i8253' of ↵Thomas Gleixner2011-05-141-75/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource Conflicts: arch/ia64/kernel/cyclone.c arch/mips/kernel/i8253.c arch/x86/kernel/i8253.c Reason: Resolve conflicts so further cleanups do not conflict further Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * clocksource: convert x86 to generic i8253 clocksourceRussell King2011-05-141-78/+1
| | | | | | | | | | | | | | | | | | | | Convert x86 i8253 clocksource code to use generic i8253 clocksource. Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | x86: Convert remaining x86 clocksources to clocksource_register_hz/khzJohn Stultz2011-02-211-5/+1
|/ | | | | | | | | | | | | | | This converts the remaining x86 clocksources to use clocksource_register_hz/khz. CC: jacob.jun.pan@intel.com CC: Glauber Costa <glommer@redhat.com> CC: Dimitri Sivanich <sivanich@sgi.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Jeremy Fitzhardinge <jeremy@xensource.com> CC: Chris McDermott <lcm@us.ibm.com> CC: Thomas Gleixner <tglx@linutronix.de> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen] Signed-off-by: John Stultz <johnstul@us.ibm.com>
* i8253: Convert i8253_lock to raw_spinlockThomas Gleixner2010-03-021-7/+7
| | | | | | | | | | | | | | | i8253_lock needs to be a real spinlock in preempt-rt, i.e. it can not be converted to a sleeping lock. Convert it to raw_spinlock and fix up all users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> LKML-Reference: <20100217163751.030764372@linutronix.de>
* x86: Do not unregister PIT clocksource on PIT oneshot setup/shutdownThomas Gleixner2009-08-211-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This basically reverts commit 1a0c009ac (x86: unregister PIT clocksource when PIT is disabled) because the problem which was tried to address with that patch has been solved by commit 3f68535ada (clocksource: sanity check sysfs clocksource changes). The problem addressed by the original patch is that PIT could be selected as clocksource after the system switched the PIT off or set the PIT into one shot mode which would result in complete timekeeping wreckage. Now with the sysfs sanity check in place PIT cannot be selected again when the system is in oneshot mode. The system will not switch to one shot mode as long as PIT is installed because PIT is not suitable for one shot. The shutdown case which happens when the lapic timer is installed is covered by the fact that init_pit_clocksource() is called after the lapic timer take over and then does not install the PIT clocksource at all. We should have done the sanity checks back then, but ... This also solves the locking problem which was reported vs. the clocksource rework. LKML-Reference: <new-submission> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* time: move PIT_TICK_RATE to linux/timex.hArnd Bergmann2009-06-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | PIT_TICK_RATE is currently defined in four architectures, but in three different places. While linux/timex.h is not the perfect place for it, it is still a reasonable replacement for those drivers that traditionally use asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency. Note that for Alpha, the actual value changed from 1193182UL to 1193180UL. This is unlikely to make a difference, and probably can only improve accuracy. There was a discussion on the correct value of CLOCK_TICK_RATE a few years ago, after which every existing instance was getting changed to 1193182. According to the specification, it should be 1193181.818181... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* clocksource: pass clocksource to read() callbackMagnus Damm2009-04-211-1/+1
| | | | | | | | | | | | | | Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86: i8253 cleanupJaswinder Singh Rajput2009-03-211-35/+33
| | | | | | | | | Impact: cleanup - fix various style problems - fix header file issues Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
* cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell2008-12-131-1/+1
| | | | | | | | | | | | | Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
* x86: cleanup div_sc() usageAkinobu Mita2008-04-261-1/+2
| | | | | | | Remove the magic number in the third argment of div_sc(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: cleanup clocksource_hz2mult usageAkinobu Mita2008-04-261-1/+2
| | | | | | | Remove the magic number in the second argument of clocksource_hz2mult() Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: pit_clockevent can be staticHarvey Harrison2008-02-131-1/+1
| | | | | | | | arch/x86/kernel/i8253.c:98:27: warning: symbol 'pit_clockevent' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: isolate PIC/PIT in/out callsAlan Cox2008-01-301-15/+15
| | | | | | | | | | | | | | | | | Rather than remove and/or mangle inb_p/outb_p we want to remove the use of them from inappropriate places. For the PIC/PIT this may eventually depend on 32/64bitism or similar so start by adding inb/outb_pit and inb/outb_pic so that we can make them use any scheme we settle on without disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can make inb_pit use udelay without messing up inb_p). Floppy already does this for the fdc. That really only leaves the CMOS as a core logic item to tackle, and bits of parallel port handling in the chipset layers. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* mips, x86: optimize the i8259 code a bitRalf Baechle2008-01-301-8/+4
| | | | | | | | | | | | The timer code always calls the clock_event_device set_net_event and set_mode methods with interrupts disabled, so no need to use spin_lock_irqsave / spin_unlock_irqrestore for those. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by:Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: unregister PIT clocksource when PIT is disabledThomas Gleixner2008-01-301-0/+19
| | | | | | | | | | | | | | | | | The following scenario might leave PIT as a disfunctional clock source: PIT is registered as clocksource PM_TIMER is registered as clocksource and enables highres/dyntick mode PIT is switched to oneshot mode -> now the readout of PIT is bogus, but the user might select PIT via the sysfs override, which would break the box as the time readout is unusable. Unregister the PIT clocksource when the PIT clock event device is switched into shutdown / oneshot mode. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* clocksource: add unregister function to disable unusable clocksourcesThomas Gleixner2008-01-301-0/+1
| | | | | | | | | On x86 the PIT might become an unusable clocksource. Add an unregister function to provide a possibilty to remove the PIT from the list of available clock sources. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: restrict PIT clocksource usageThomas Gleixner2008-01-301-1/+9
| | | | | | | | | | | | | | | PIT clocksource is registered unconditionally even when HPET is enabled or when PIT is replaced by the local APIC timer. In both cases PIT can not be used as it is stopped and the readout would be stale. Prevent registering PIT in those cases. patch depends on: x86: offer is_hpet_enabled() on !CONFIG_HPET_TIMER too Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* spelling fixes: arch/i386/Simon Arlott2007-10-201-1/+1
| | | | | | | Spelling fixes in arch/i386/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* Delete filenames in comments.Dave Jones2007-10-131-1/+1
| | | | | | | | | | | | | | | Since the x86 merge, lots of files that referenced their own filenames are no longer correct. Rather than keep them up to date, just delete them, as they add no real value. Additionally: - fix up comment formatting in scx200_32.c - Remove a credit from myself in setup_64.c from a time when we had no SCM - remove longwinded history from tsc_32.c which can be figured out from git. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86_64: remove now unused codeThomas Gleixner2007-10-121-0/+208
Remove the unused code after the switch to clock events. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
OpenPOWER on IntegriCloud