summaryrefslogtreecommitdiffstats
path: root/arch/x86/include
Commit message (Collapse)AuthorAgeFilesLines
* x86, perf: Add raw events support for the P4 PMUCyrill Gorcunov2010-03-261-309/+382
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The adding of raw event support lead to complete code refactoring. I hope is became more readable then it was. The list of changes: 1) The 64bit config field is enough to hold all information we need to track event details. To achieve it we used *own* enum for events selection in ESCR register and map this key into proper value at moment of event enabling. For the same reason we use 12LSB bits in CCCR register -- to track which exactly cache trace event was requested. And we cear this bits at real 'write' moment. 2) There is no per-cpu area reserved for P4 PMU anymore. We don't need it. All is held by config. 3) Now we may use any available counter, ie we try to grab any possible counter. v2: - Lin Ming reported the lack of ESCR selector in CCCR for cache events v3: - Don't loose cache event codes at config unpacking procedure, we may need it one day so no obscure hack behind our back, better to clear reserved bits explicitly when needed (thanks Ming for pointing out) - Lin Ming fixed misplaced opcodes in cache events Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com> [ v4: did a few whitespace fixlets ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge commit 'v2.6.34-rc2' into perf/coreIngo Molnar2010-03-227-61/+10
|\ | | | | | | | | | | Merge reason: Pick up latest perf fixes from upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2010-03-132-3/+14
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Provide generic perf_sample_data initialization MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer perf trace: Don't use pager if scripting perf trace/scripting: Remove extraneous header read perf, ARM: Modify kuser rmb() call to compile for Thumb-2 x86/stacktrace: Don't dereference bad frame pointers perf archive: Don't try to collect files without a build-id perf_events, x86: Fixup fixed counter constraints perf, x86: Restrict the ANY flag perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE perf, x86: add some IBS macros to perf_event.h perf, x86: make IBS macros available in perf_event.h hw-breakpoints: Remove stub unthrottle callback x86/hw-breakpoints: Remove the name field perf: Remove pointless breakpoint union perf lock: Drop the buffers multiplexing dependency perf lock: Fix and add misc documentally things percpu: Add __percpu sparse annotations to hw_breakpoint
| * | pci-dma: add linux/pci-dma.h to linux/pci.hFUJITA Tomonori2010-03-121-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the architectures properly set NEED_DMA_MAP_STATE now so we can safely add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h inclusion in arch's asm/pci.h Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | pci-dma: x86: use include/linux/pci-dma.hFUJITA Tomonori2010-03-121-28/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | ptrace: move user_enable_single_step & co prototypes to linux/ptrace.hChristoph Hellwig2010-03-121-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While in theory user_enable_single_step/user_disable_single_step/ user_enable_blockstep could also be provided as an inline or macro there's no good reason to do so, and having the prototype in one places keeps code size and confusion down. Roland said: The original thought there was that user_enable_single_step() et al might well be only an instruction or three on a sane machine (as if we have any of those!), and since there is only one call site inlining would be beneficial. But I agree that there is no strong reason to care about inlining it. As to the arch changes, there is only one thought I'd add to the record. It was always my thinking that for an arch where PTRACE_SINGLESTEP does text-modifying breakpoint insertion, user_enable_single_step() should not be provided. That is, arch_has_single_step()=>true means that there is an arch facility with "pure" semantics that does not have any unexpected side effects. Inserting a breakpoint might do very unexpected strange things in multi-threaded situations. Aside from that, it is a peculiar side effect that user_{enable,disable}_single_step() should cause COW de-sharing of text pages and so forth. For PTRACE_SINGLESTEP, all these peculiarities are the status quo ante for that arch, so having arch_ptrace() itself do those is one thing. But for building other things in the future, it is nicer to have a uniform "pure" semantics that arch-independent code can expect. OTOH, all such arch issues are really up to the arch maintainer. As of today, there is nothing but ptrace using user_enable_single_step() et al so it's a distinction without a practical difference. If/when there are other facilities that use user_enable_single_step() and might care, the affected arch's can revisit the question when someone cares about the quality of the arch support for said new facility. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Add generic sys_olduname()Christoph Hellwig2010-03-124-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add generic implementations of the old and really old uname system calls. Note that sh only implements sys_olduname but not sys_oldolduname, but I'm not going to bother with another ifdef for that special case. m32r implemented an old uname but never wired it up, so kill it, too. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | improve sys_newuname() for compat architecturesChristoph Hellwig2010-03-123-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On an architecture that supports 32-bit compat we need to override the reported machine in uname with the 32-bit value. Instead of doing this separately in every architecture introduce a COMPAT_UTS_MACHINE define in <asm/compat.h> and apply it directly in sys_newuname(). Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Add generic sys_ipc wrapperChristoph Hellwig2010-03-122-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a generic implementation of the ipc demultiplexer syscall. Except for s390 and sparc64 all implementations of the sys_ipc are nearly identical. There are slight differences in the types of the parameters, where mips and powerpc as the only 64-bit architectures with sys_ipc use unsigned long for the "third" argument as it gets casted to a pointer later, while it traditionally is an "int" like most other paramters. frv goes even further and uses unsigned long for all parameters execept for "ptr" which is a pointer type everywhere. The change from int to unsigned long for "third" and back to "int" for the others on frv should be fine due to the in-register calling conventions for syscalls (we already had a similar issue with the generic sys_ptrace), but I'd prefer to have the arch maintainers looks over this in details. Except for that h8300, m68k and m68knommu lack an impplementation of the semtimedop sub call which this patch adds, and various architectures have gets used - at least on i386 it seems superflous as the compat code on x86-64 and ia64 doesn't even bother to implement it. [akpm@linux-foundation.org: add sys_ipc to sys_ni.c] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Add generic sys_old_mmap()Christoph Hellwig2010-03-123-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a generic implementation of the old mmap() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Add generic sys_old_select()Christoph Hellwig2010-03-123-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a generic implementation of the old select() syscall, which expects its argument in a memory block and switch all architectures over to use it. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Acked-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: David Howells <dhowells@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | perf, x86: Fix key indexing in Pentium-4 PMULin Ming2010-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Index 0-6 in p4_templates are reserved for common hardware events. So p4_templates is arranged as below: 0 - 6: common hardware events 7 - N: cache events N+1 - ...: other raw events Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268983738.13901.142.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | x86, perf: Fix few cosmetic dabs for P4 pmu (comments and constantify)Cyrill Gorcunov2010-03-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - A few ESCR have escaped fixing at previous attempt. - p4_escr_map is read only, make it const. Nothing serious. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lin Ming <ming.m.lin@intel.com> LKML-Reference: <20100318211256.GH5062@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | perf, x86: Add cache events for the Pentium-4 PMULin Ming2010-03-182-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the HT bit setting code from p4_pmu_event_map to p4_hw_config. So the cache events can get HT bit set correctly. Tested on my P4 desktop, below 6 cache events work: L1-dcache-load-misses LLC-load-misses dTLB-load-misses dTLB-store-misses iTLB-loads iTLB-load-misses Signed-off-by: Lin Ming <ming.m.lin@intel.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268908392.13901.128.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | perf, x86: Add a key to simplify template lookup in Pentium-4 PMULin Ming2010-03-181-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, we use opcode(Event and Event-Selector) + emask to look up template in p4_templates. But cache events (L1-dcache-load-misses, LLC-load-misses, etc) use the same event(P4_REPLAY_EVENT) to do the counting, ie, they have the same opcode and emask. So we can not use current lookup mechanism to find the template for cache events. This patch introduces a "key", which is the index into p4_templates. The low 12 bits of CCCR are reserved, so we can hide the "key" in the low 12 bits of hwc->config. We extract the key from hwc->config and then quickly find the template. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268908387.13901.127.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | x86, apic: Allow to use certain functions without APIC built-in supportCyrill Gorcunov2010-03-181-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case even if the kernel is configured so that no APIC support is built-in we still may allow to use certain apic functions as dummy calls. In particular we start using it in perf-events code. Note that this is not that same as NOOP apic driver (which is used if APIC support is present but no physical APIC is available), this is for the case when we don't have apic code compiled in at all. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20100317104356.011052632@openvz.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | x86, perf: Fix comments in Pentium-4 PMU definitionsLin Ming2010-03-161-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1268705556.3379.8.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | perf, x86: Enable not tagged retired instruction counting on P4sCyrill Gorcunov2010-03-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This should turn on instruction counting on P4s, which was missing in the first version of the new PMU driver. It's inaccurate for now, we still need dependant event to tag mops before we can count them precisely. The result is that the number of instruction may be lifted up. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1268629102.3355.11.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | perf, x86: Implement initial P4 PMU driverCyrill Gorcunov2010-03-112-1/+708
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The netburst PMU is way different from the "architectural perfomance monitoring" specification that current CPUs use. P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle perfomance monitoring events. A few implementational details: 1) We need a separate x86_pmu::hw_config helper in struct x86_pmu since register bit-fields are quite different from P6, Core and later cpu series. 2) For the same reason is a x86_pmu::schedule_events helper introduced. 3) hw_perf_event::config consists of packed ESCR+CCCR values. It's allowed since in reality both registers only use a half of their size. Of course before making a real write into a particular MSR we need to unpack the value and extend it to a proper size. 4) The tuple of packed ESCR+CCCR in hw_perf_event::config doesn't describe the memory address of ESCR MSR register so that we need to keep a mapping between these tuples used and available ESCR (various P4 events may use same ESCRs but not simultaneously), for this sake every active event has a per-cpu map of hw_perf_event::idx <--> ESCR addresses. 5) Since hw_perf_event::idx is an offset to counter/control register we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel strips it down to 8 registers and event armed may never be turned off (ie the bit in active_mask is set but the loop never reaches this index to check), thanks to Peter Zijlstra Restrictions: - No cascaded counters support (do we ever need them?) - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS doesn't work for now) - There are events with same counters which can't work simultaneously (need to use intersected ones due to broken counter 1) - No PERF_COUNT_HW_CACHE_ events yet Todo: - Implement dependent events - Need proper hashing for event opcodes (no linear search, good for debugging stage but not in real loads) - Some events counted during a clock cycle -- need to set threshold for them and count every clock cycle just to get summary statistics (ie to behave the same way as other PMUs do) - Need to swicth to use event_constraints - To support RAW events we need to encode a global list of P4 events into p4_templates - Cache events need to be added Event support status matrix: Event status ----------------------------- cycles works cache-references works cache-misses works branch-misses works bus-cycles partially (does not work on 64bit cpu with HT enabled) instruction doesnt work (needs dependent event [mop tagging]) branches doesnt work Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Stephane Eranian <eranian@google.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100311165439.GB5129@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | x86: Move MAX_INSN_SIZE into asm/insn.hPeter Zijlstra2010-03-102-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since there's now two users for this, place it in a common header. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <20100304140100.923774125@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | perf, x86: use LBR for PEBS IP+1 fixupPeter Zijlstra2010-03-101-0/+19
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the LBR to fix up the PEBS IP+1 issue. As said, PEBS reports the next instruction, here we use the LBR to find the last branch and from that construct the actual IP. If the IP matches the LBR-TO, we use LBR-FROM, otherwise we use the LBR-TO address as the beginning of the last basic block and decode forward. Once we find a match to the current IP, we use the previous location. This patch introduces a new ABI element: PERF_RECORD_MISC_EXACT, which conveys that the reported IP (PERF_SAMPLE_IP) is the exact instruction that caused the event (barring CPU errata). The fixup can fail due to various reasons: 1) LBR contains invalid data (quite possible) 2) part of the basic block got paged out 3) the reported IP isn't part of the basic block (see 1) Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com LKML-Reference: <20100304140100.619375431@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge commit 'v2.6.34-rc1' into perf/urgentIngo Molnar2010-03-0958-1548/+1581
|\ \ | |/ | | | | | | | | | | | | | | Conflicts: tools/perf/util/probe-event.c Merge reason: Pick up -rc1 and resolve the conflict as well. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds2010-03-0713-43/+151
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
| | * x86, olpc: Use pci subarch init for OLPCThomas Gleixner2010-02-252-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the #ifdef'ed OLPC-specific init functions by a conditional x86_init function. If the function returns 0 we leave pci_arch_init, otherwise we continue. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andres Salomon <dilinger@collabora.co.uk> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE89@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, pci: Add arch_init to x86_init abstractionThomas Gleixner2010-02-251-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added an abstraction function for arch specific init calls. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE84@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, legacy_irq: Remove left over nr_legacy_irqsYinghai Lu2010-02-241-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nr_legacy_irqs and its ilk have moved to legacy_pic. -v2: there is one in ioapic_.c Singed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B84AAC4.2020204@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, apbt: Moorestown APB system timer driverJacob Pan2010-02-241-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moorestown platform does not have PIT or HPET platform timers. Instead it has a bank of eight APB timers. The number of available timers to the os is exposed via SFI mtmr tables. All APB timer interrupts are routed via ioapic rtes and delivered as MSI. Currently, we use timer 0 and 1 for per cpu clockevent devices, timer 2 for clocksource. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D2D2@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, mrst: Add vrtc platform data setup codeFeng Tang2010-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vRTC information is obtained from SFI tables on Moorestown, this patch parses these tables and assign the information. Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0D@orsmsx508.amr.corp.intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, mrst: Add platform timer info parsing codeJacob Pan2010-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Moorestown platform timer information is obtained from SFI FW tables. This patch parses SFI table then assign the irq information to mp_irqs. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0B@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, mrst: Fill in PCI functions in x86_init layerJacob Pan2010-02-231-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | This patch added Moorestown platform specific PCI init functions. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D0A@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, ioapic: Add dummy ioapic functionsJacob Pan2010-02-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some ioapic extern functions are used when CONFIG_X86_IO_APIC is not defined. We need the dummy functions to avoid a compile time error. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318DA07@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * x86, ioapic: Early enable ioapic for timer irqJacob Pan2010-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moorestown platform needs apic ready early for the system timer irq which is delievered via ioapic. Should not impact other platforms. In the longer term, once ioapic setup is moved before late time init, we will not need this patch to do early apic enabling. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D07@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * Merge remote branch 'origin/x86/apic' into x86/mrstH. Peter Anvin2010-02-224-26/+26
| | |\ | | | | | | | | | | | | | | | | Conflicts: arch/x86/kernel/apic/io_apic.c
| | * | x86, apic: Remove ioapic_disable_legacy()Jacob Pan2010-02-191-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ioapic_disable_legacy() call is no longer needed for platforms do not have legacy pic. the legacy pic abstraction has taken care it automatically. This patch also initialize irq-related static variables based on information obtained from legacy_pic. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A30A7660@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | x86, pic: Make use of legacy_pic abstractionJacob Pan2010-02-192-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces legacy PIC-related global variable and functions with the new legacy_pic abstraction. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D04@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | x86, pic: Introduce legacy_pic abstractionJacob Pan2010-02-191-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes i8259A like legacy programmable interrupt controller code into a driver so that legacy pic functions can be selected at runtime based on platform information, such as HW subarchitecure ID. Default structure of legacy_pic maintains the current code path for x86pc. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D03@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | x86: Add pcibios_fixup_irqs to x86_initThomas Gleixner2010-02-192-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Platforms like Moorestown want to override the pcibios_fixup_irqs default function. Add it to x86_init.pci. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80D00@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | x86: Add pci_init_irq to x86_initThomas Gleixner2010-02-192-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moorestown wants to reuse pcibios_init_irq but needs to provide its own implementation of pci_enable_irq. After we distangled the init we can move the init_irq call to x86_init and remove the pci_enable_irq != NULL check in pcibios_init_irq. pci_enable_irq is compile time initialized to pirq_enable_irq and the special cases which override it (visws and acpi) set the x86_init function pointer to noop. That allows MSRT to override pci_enable_irq and otherwise run pcibios_init_irq unmodified. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFF@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| | * | x86: Move pci init function to x86_initThomas Gleixner2010-02-196-6/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init, pci_acpi_init, pci_visws_init and pci_legacy_init are called and each implementation checks and eventually modifies the global variable pcibios_scanned. x86_init functions allow us to do this more elegant. The pci.init function pointer is preset to pci_legacy_init. numaq, acpi and visws can modify the pointer in their early setup functions. The functions return 0 when they did the full initialization including bus scan. A non zero return value indicates that pci_legacy_init needs to be called either because the selected function failed or wants the generic bus scan in pci_legacy_init to happen (e.g. visws). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| * | | Merge branch 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2010-03-057-29/+243
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (145 commits) KVM: x86: Add KVM_CAP_X86_ROBUST_SINGLESTEP KVM: VMX: Update instruction length on intercepted BP KVM: Fix emulate_sys[call, enter, exit]()'s fault handling KVM: Fix segment descriptor loading KVM: Fix load_guest_segment_descriptor() to inject page fault KVM: x86 emulator: Forbid modifying CS segment register by mov instruction KVM: Convert kvm->requests_lock to raw_spinlock_t KVM: Convert i8254/i8259 locks to raw_spinlocks KVM: x86 emulator: disallow opcode 82 in 64-bit mode KVM: x86 emulator: code style cleanup KVM: Plan obsolescence of kernel allocated slots, paravirt mmu KVM: x86 emulator: Add LOCK prefix validity checking KVM: x86 emulator: Check CPL level during privilege instruction emulation KVM: x86 emulator: Fix popf emulation KVM: x86 emulator: Check IOPL level during io instruction emulation KVM: x86 emulator: fix memory access during x86 emulation KVM: x86 emulator: Add Virtual-8086 mode of emulation KVM: x86 emulator: Add group9 instruction decoding KVM: x86 emulator: Add group8 instruction decoding KVM: do not store wqh in irqfd ... Trivial conflicts in Documentation/feature-removal-schedule.txt
| | * | | KVM: Fix segment descriptor loadingGleb Natapov2010-03-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add proper error and permission checking. This patch also change task switching code to load segment selectors before segment descriptors, like SDM requires, otherwise permission checking during segment descriptor loading will be incorrect. Cc: stable@kernel.org (2.6.33, 2.6.32) Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| | * | | KVM: x86 emulator: Check IOPL level during io instruction emulationGleb Natapov2010-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make emulator check that vcpu is allowed to execute IN, INS, OUT, OUTS, CLI, STI. Signed-off-by: Gleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
| | * | | KVM: x86 emulator: fix memory access during x86 emulationGleb Natapov2010-03-012-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently when x86 emulator needs to access memory, page walk is done with broadest permission possible, so if emulated instruction was executed by userspace process it can still access kernel memory. Fix that by providing correct memory access to page walker during emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
| | * | | KVM: x86 emulator: Add Virtual-8086 mode of emulationGleb Natapov2010-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some instructions CPU behaves differently for real-mode and virtual 8086. Let emulator know which mode cpu is in, so it will not poke into vcpu state directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
| | * | | KVM: VMX: Rename VMX_EPT_IGMT_BIT to VMX_EPT_IPAT_BITSheng Yang2010-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following the new SDM. Now the bit is named "Ignore PAT memory type". Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
| | * | | KVM: Rename vcpu->shadow_efer to eferAvi Kivity2010-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the other registers have the shadow_ prefix. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| | * | | KVM: Activate fpu on cltsAvi Kivity2010-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assume that if the guest executes clts, it knows what it's doing, and load the guest fpu to prevent an #NM exception. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| | * | | KVM: SVM: Clean up and enhance mov dr emulationJan Kiszka2010-03-011-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enhance mov dr instruction emulation used by SVM so that it properly handles dr4/5: alias to dr6/7 if cr4.de is cleared. Otherwise return EMULATE_FAIL which will let our only possible caller in that scenario, ud_interception, re-inject UD. We do not need to inject faults, SVM does this for us (exceptions take precedence over instruction interceptions). For the same reason, the value overflow checks can be removed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| | * | | KVM: export <asm/hyperv.h>Avi Kivity2010-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Needed by <asm/kvm_para.h>. Signed-off-by: Avi Kivity <avi@redhat.com>
| | * | | KVM: Add HYPER-V apic access MSRsGleb Natapov2010-03-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up access to EOI/TPR/ICR apic registers for PV guests. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
OpenPOWER on IntegriCloud