summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/setup.h
Commit message (Collapse)AuthorAgeFilesLines
* support multiple .discard.* sections to avoid section type conflictsJeremy Fitzhardinge2010-07-271-1/+1
| | | | | | | | | gcc 4.4.4 will complain if you use a .discard section for both text and data ("causes a section type conflict"). Add support for ".discard.*" sections, and use .discard.text for a dummy function in the x86 RESERVE_BRK() macro. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* x86: Move pci init function to x86_initThomas Gleixner2010-02-191-2/+0
| | | | | | | | | | | | | | | | | | | | | The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init, pci_acpi_init, pci_visws_init and pci_legacy_init are called and each implementation checks and eventually modifies the global variable pcibios_scanned. x86_init functions allow us to do this more elegant. The pci.init function pointer is preset to pci_legacy_init. numaq, acpi and visws can modify the pointer in their early setup functions. The functions return 0 when they did the full initialization including bus scan. A non zero return value indicates that pci_legacy_init needs to be called either because the selected function failed or wants the generic bus scan in pci_legacy_init to happen (e.g. visws). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86: Add Moorestown early detectionThomas Gleixner2009-08-311-0/+6
| | | | | | | | | | | Moorestown MID devices need to be detected early in the boot process to setup and do not call x86_default_early_setup as there is no EBDA region to reserve. [ Copied the minimal code from Jacobs latest MRST series ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jacob Pan <jacob.jun.pan@intel.com>
* x86: Add timer_init to x86_init_opsThomas Gleixner2009-08-311-19/+2
| | | | | | | | | | | | The timer init code is convoluted with several quirks and the paravirt timer chooser. Figuring out which code path is actually taken is not for the faint hearted. Move the numaq TSC quirk to tsc_pre_init x86_init_ops function and replace the paravirt time chooser and the remaining x86 quirk with a simple x86_init_ops function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move xen_post_allocator_init into xen_pagetable_setup_doneThomas Gleixner2009-08-311-4/+0
| | | | | | | | | We really do not need two paravirt/x86_init_ops functions which are called in two consecutive source lines. Move the only user of post_allocator_init into the already existing pagetable_setup_done function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move traps_init to x86_init_opsThomas Gleixner2009-08-311-3/+0
| | | | | | Replace the quirks by a simple x86_init_ops function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move irq_init to x86_init_opsThomas Gleixner2009-08-311-3/+0
| | | | | | | | | irq_init is overridden by x86_quirks and by paravirts. Unify the whole mess and make it an unconditional x86_init_ops function which defaults to the standard function and can be overridden by the early platform code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move pre_intr_init to x86_init_opsThomas Gleixner2009-08-311-1/+0
| | | | | | | | | Replace the quirk machinery by a x86_init_ops function which defaults to the standard implementation. This is also a preparatory patch for Moorestown support which needs to replace the default init_ISA_irqs as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move get/find_smp_config to x86_init_opsThomas Gleixner2009-08-311-2/+0
| | | | | | | Replace the quirk machinery by a x86_init_ops function which defaults to the standard implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move oem_bus_info to x86_init_opsThomas Gleixner2009-08-271-3/+0
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move mpc_oem_pci_bus to x86_init_opsThomas Gleixner2009-08-271-1/+0
| | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move smp_read_mpc_oem to x86_init_ops.Thomas Gleixner2009-08-271-3/+0
| | | | | | Move smp_read_mpc_oem from quirks to x86_init. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move mpc_apic_id to x86_init_opsThomas Gleixner2009-08-271-2/+0
| | | | | | | The mpc_apic_id setup is handled by a x86_quirk. Make it a x86_init_ops function with a default implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move ioapic_ids_setup to x86_init_opsThomas Gleixner2009-08-271-1/+0
| | | | | | | | 32bit and also the numaq code have special requirements on the ioapic_id setup. Convert it to a x86_init_ops function and get rid of the quirks and #ifdefs Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Sanitize smp_record and move it to x86_init_opsThomas Gleixner2009-08-271-1/+0
| | | | | | | | | | | The x86 quirkification introduced an extra ugly hackery with a variable pointer in the mpparse code. If the pointer is initialized then it is dereferenced and the variable set to 0 or incremented. Create a x86_init_ops function and let the affected numaq code hold the function. Default init is a setup noop. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Move memory_setup to x86_init_opsThomas Gleixner2009-08-271-1/+0
| | | | | | | | | memory_setup is overridden by x86_quirks and by paravirts with weak functions and quirks. Unify the whole mess and make it an unconditional x86_init_ops function which defaults to the standard function and can be overridden by the early platform code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Add request_standard_resources to x86_initThomas Gleixner2009-08-271-0/+3
| | | | | | | | | | | | The 32bit and the 64bit code are slighty different in the reservation of standard resources. Also the upcoming Moorestown support needs its own version of that. Add it to x86_init_ops and initialize it with the 64bit default. 32bit overrides it in early boot. Now moorestown can add it's own override w/o sprinkling the code with more #ifdefs Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Add x86_init infrastructureThomas Gleixner2009-08-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The upcoming Moorestown support brings the embedded world to x86. The setup code of x86 has already a couple of hooks which are either x86_quirks or paravirt ops. Some of those setup hooks are pretty convoluted like the timer setup and the tsc calibration code. But there are other places which could do with a cleanup. Instead of having inline functions/macros which are modified at compile time I decided to introduce x86_init ops which are unconditional in the code and make it clear that they can be changed either during compile time or in the early boot process. The function pointers are initialized by default functions which can be noops so that the pointer can be called unconditionally in the most cases. This also allows us to remove 32bit/64bit, paravirt and other #ifdeffery. paravirt guests are just a hardware platform in the setup code, so we should treat them as such and not hide all behind multiple layers of indirection and compile time dependencies. It's more obvious that x86_init.timers.timer_init() is a function pointer than the late_time_init = choose_time_init() obscurity. It's also way simpler to grep for x86_init.timers.timer_init and find all the places which modify that function pointer instead of analyzing weak functions, macros and paravirt indirections. Note. This is not a general paravirt_ops replacement. It just will move setup related hooks which are potentially useful for other platform setup purposes as well out of the paravirt domain. Add the base infrastructure without any functionality. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: move x86_quirk_pre_intr_init() to irqinit_32.cPekka Enberg2009-04-101-1/+0
| | | | | | | | | | | Impact: cleanup In preparation for unifying irqinit_{32,64}.c, make x86_quirk_pre_intr_init() local to irqinit_32.c. Reviewed-by Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Revert "x86: don't compile vsmp_64 for 32bit"Ravikiran G Thirumalai2009-03-251-1/+1
| | | | | | | | | | | | | | | | Partial revert of commit 129d8bc828e011bda0b7110a097bf3a0167f966e titled 'x86: don't compile vsmp_64 for 32bit' Commit reverted to compile vsmp_64.c if CONFIG_X86_64 is defined, since is_vsmp_box() needs to indicate that TSCs are not synchronized, and hence, not a valid time source, even when CONFIG_X86_VSMP is not defined. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: shai@scalex86.org LKML-Reference: <20090324061429.GH7278@localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86/brk: make the brk reservation symbols inaccessible from CJeremy Fitzhardinge2009-03-171-5/+5
| | | | | | | | | | | | | Impact: bulletproofing, clarification The brk reservation symbols are just there to document the amount of space reserved by brk users in the final vmlinux file. Their addresses are irrelevent, and using their addresses will cause certain havok. Name them ".brk.NAME", which is a valid asm symbol but C can't reference it; it also highlights their special role in the symbol table. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* x86: allow extend_brk users to reserve brk spaceJeremy Fitzhardinge2009-03-141-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: new interface; remove hard-coded limit Add RESERVE_BRK(name, size) macro to reserve space in the brk area. This should be a conservative (ie, larger) estimate of how much space might possibly be required from the brk area. Any unused space will be freed, so there's no real downside on making the reservation too large (within limits). The name should be unique within a given file, and somewhat descriptive. The C definition of RESERVE_BRK() ends up being more complex than one would expect to work around a cluster of gcc infelicities: The first attempt was to simply try putting __section(.brk_reservation) on a variable. This doesn't work because it ends up making it a @progbits section, which gets actual space allocated in the vmlinux executable. The second attempt was to emit the space into a section using asm, but gcc doesn't allow arguments to be passed to file-level asm() statements, making it hard to pass in the size. The final attempt is to wrap the asm() in a function to allow it to have arguments, and put the function itself into the .discard section, which vmlinux*.lds drops entirely from the emitted vmlinux. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86-32: use brk segment for allocating initial kernel pagetableJeremy Fitzhardinge2009-03-141-3/+0
| | | | | | | | | | | | | | | Impact: use new interface instead of previous ad hoc implementation Rather than having special purpose init_pg_table_start/end variables to delimit the kernel pagetable built by head_32.S, just use the brk mechanism to extend the bss for the new pagetable. This patch removes init_pg_table_start/end and pg0, defines __brk_base (which is page-aligned and immediately follows _end), initializes the brk region to start there, and uses it for the 32-bit pagetable. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86: add brk allocation for very, very early allocationsJeremy Fitzhardinge2009-03-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: new interface Add a brk()-like allocator which effectively extends the bss in order to allow very early code to do dynamic allocations. This is better than using statically allocated arrays for data in subsystems which may never get used. The space for brk allocations is in the bss ELF segment, so that the space is mapped properly by the code which maps the kernel, and so that bootloaders keep the space free rather than putting a ramdisk or something into it. The bss itself, delimited by __bss_stop, ends before the brk area (__brk_base to __brk_limit). The kernel text, data and bss is reserved up to __bss_stop. Any brk-allocated data is reserved separately just before the kernel pagetable is built, as that code allocates from unreserved spaces in the e820 map, potentially allocating from any unused brk memory. Ultimately any unused memory in the brk area is used in the general kernel memory pool. Initially the brk space is set to 1MB, which is probably much larger than any user needs (the largest current user is i386 head_32.S's code to build the pagetables to map the kernel, which can get fairly large with a big kernel image and no PSE support). So long as the system has sufficient memory for the bootloader to reserve the kernel+1MB brk, there are no bad effects resulting from an over-large brk. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86: don't compile vsmp_64 for 32bitYinghai Lu2009-02-261-0/+4
| | | | | | | | | | | Impact: cleanup that is only needed when CONFIG_X86_VSMP is defined with 64bit also remove dead code about PCI, because CONFIG_X86_VSMP depends on PCI Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: remove update_apic from x86_quirksYinghai Lu2009-02-261-3/+0
| | | | | | | | | | | | | Impact: cleanup x86_quirks->update_apic() calling looks crazy. so try to remove it: 1. every apic take wakeup_cpu member directly 2. separate es7000_apic to es7000_apic_cluster 3. use uv_wakeup_cpu directly Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: refactor x86_quirks supportIngo Molnar2009-02-231-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup Make x86_quirks support more transparent. The highlevel methods are now named: extern void x86_quirk_pre_intr_init(void); extern void x86_quirk_intr_init(void); extern void x86_quirk_trap_init(void); extern void x86_quirk_pre_time_init(void); extern void x86_quirk_time_init(void); This makes it clear that if some platform extension has to do something here that it is considered ... weird, and is discouraged. Also remove arch_hooks.h and move it into setup.h (and other header files where appropriate). Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86, apic: rename 'genapic' to 'apic'Ingo Molnar2009-02-171-1/+1
| | | | | | | | | | | Impact: cleanup Now that all APIC code is consolidated there's nothing 'gen' about apics anymore - so rename 'struct genapic' to 'struct apic'. This shortens the code and is nicer to read as well. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'core/header-fixes' into x86/headersIngo Molnar2009-02-131-21/+22
|\ | | | | | | | | Conflicts: arch/x86/include/asm/setup.h
| * headers_check fix: x86, setup.hJaswinder Singh Rajput2009-02-021-23/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | fix the following 'make headers_check' warning: usr/include/asm/setup.h:16: extern's make no sense in userspace usr/include/asm/setup.h:17: extern's make no sense in userspace usr/include/asm/setup.h:23: extern's make no sense in userspace usr/include/asm/setup.h:24: extern's make no sense in userspace usr/include/asm/setup.h:51: extern's make no sense in userspace usr/include/asm/setup.h:52: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
| |
| \
*-. \ Merge branches 'x86/asm', 'x86/cleanups', 'x86/cpudetect', 'x86/debug', ↵Ingo Molnar2009-01-281-5/+3
|\ \ \ | | |/ | |/| | | | 'x86/doc', 'x86/header-fixes', 'x86/mm', 'x86/paravirt', 'x86/pat', 'x86/setup-v2', 'x86/subarch', 'x86/uaccess' and 'x86/urgent' into x86/core
| | * x86: headers cleanup - setup.hCyrill Gorcunov2009-01-141-5/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup 'make headers_check' warn us about leaking of kernel private (mostly compile time vars) data to userspace in headers. Fix it. Guard this one by __KERNEL__. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | x86: misc clean up after the percpu updateTejun Heo2009-01-161-1/+0
|/ | | | | | | | | | | | Do the following cleanups: * kill x86_64_init_pda() which now is equivalent to pda_init() * use per_cpu_offset() instead of cpu_pda() when initializing initial_gs Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: rename mpc_config_oemtable to mpc_oemtableJaswinder Singh Rajput2009-01-041-2/+2
| | | | | | | | | | | | Impact: cleanup, solve 80 columns wrap problems mpc_config_oemtable should be renamed to mpc_oemtable. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: rename mpc_config_processor to mpc_cpuJaswinder Singh Rajput2009-01-041-2/+2
| | | | | | | | | | | | | | | Impact: cleanup, solve 80 columns wrap problems mpc_config_processor should be renamed to mpc_cpu. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Plus 'processor' is a lot longer than 'cpu' - so we try to use 'cpu' in all type names, as much as possible. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: rename mpc_config_bus to mpc_busJaswinder Singh Rajput2009-01-041-3/+3
| | | | | | | | | | | Impact: cleanup, solve 80 columns wrap problems mpc_config_bus should be renamed to mpc_bus. The reason: the 'c' in MPC already means 'config' - no need to repeat that in the type name. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
*-. Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', ↵Ingo Molnar2008-12-231-0/+7
|\ \ | | | | | | | | | 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core
| | * x86: fix wakeup_cpu with numaq/es7000, v2, fixYinghai Lu2008-11-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix wakeup_secondary_cpu with hotplug We can not put that into x86_quirks, because that is __initdata. So try to move that to genapic, and add update_genapic in x86_quirks. later we even could use that stub to: 1. autodetect CONFIG_ES7000_CLUSTERED_APIC 2. more correct inquire_remote_apic with apic_verbosity setting. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| | * x86: fix wakeup_cpu with numaq/es7000, v2Yinghai Lu2008-11-171-0/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix secondary-CPU wakeup/init path with numaq and es7000 While looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI: |#ifdef WAKE_SECONDARY_VIA_NMI |/* | * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal | * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this | * won't ... remember to clear down the APIC, etc later. | */ |static int __devinit |wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) |{ | unsigned long send_status, accept_status = 0; | int maxlvt; |... | if (APIC_INTEGRATED(apic_version[phys_apicid])) { | maxlvt = lapic_get_maxlvt(); I noticed that there is no warning about undefined phys_apicid... because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_INIT can not be defined at the same time. So NUMAQ is using wrong wakeup_secondary_cpu. WAKE_SECONDARY_VIA_NMI, WAKE_SECONDARY_VIA_INIT and WAKE_SECONDARY_VIA_MIP are variants of a weird and fragile preprocessor-driven "HAL" mechanisms to specify the kind of secondary-CPU wakeup strategy a given x86 kernel will use. The vast majority of systems want to use INIT for secondary wakeup - NUMAQ uses an NMI, (old-style-) ES7000 uses 'MIP' (a firmware driven in-memory flag to let secondaries continue). So convert these mechanisms to x86_quirks and add a ->wakeup_secondary_cpu() method to specify the rare exception to the sane default. Extend genapic accordingly as well, for 32-bit. While looking further, I noticed that functions in wakecup.h for numaq and es7000 are different to the default in mach_wakecpu.h - but smpboot.c will only use default mach_wakecpu.h with smphook.h. So we need to add mach_wakecpu.h for mach_generic, to properly support numaq and es7000, and vectorize the following SMP init methods: int trampoline_phys_low; int trampoline_phys_high; void (*wait_for_init_deassert)(atomic_t *deassert); void (*smp_callin_clear_local_apic)(void); void (*store_NMI_vector)(unsigned short *high, unsigned short *low); void (*restore_NMI_vector)(unsigned short *high, unsigned short *low); void (*inquire_remote_apic)(int apicid); Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * x86: corruption check: move the corruption checks into their own fileArjan van de Ven2008-10-271-0/+4
|/ | | | | | | | | | | | Impact: cleanup The corruption check code is rather sizable and it's likely to grow over time when we add checks for more types of corruptions (there's a few candidates in kerneloops.org that I want to add checks for)... so lets move it to its own file Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: Fix ASM_X86__ header guardsH. Peter Anvin2008-10-221-3/+3
| | | | | | | | | Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86, um: ... and asm-x86 moveAl Viro2008-10-221-0/+105
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
OpenPOWER on IntegriCloud