summaryrefslogtreecommitdiffstats
path: root/arch/sparc/include
Commit message (Collapse)AuthorAgeFilesLines
* sparc: Remove unnecessary semicolonsJoe Perches2011-06-074-8/+8
| | | | | | | | Semicolons are not necessary after switch/while/for/if braces so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc32,leon: add GRPCI2 PCI Host driverDaniel Hellstrom2011-06-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA region must be accessible in order for PCI peripheral drivers to work, the sparc32 has DMA in the normal memory zone which requires the GRPCI2 to PCI target BARs so that all kernel low mem (192MB) can be mapped 1:1 to PCI address space. The GRPCI2 has resizeable target BARs, by default the first is made 256MB and all other BARs are disabled. I/O space are always located on 0x1000-0x10000, but accessed through the GRPCI2 PCI I/O Window memory mapped to virtual address space. Configuration space is accessed through the 64KB GRPCI2 PCI CFG Window using LDA bypassing the MMU. The GRPCI2 has a single PCI Window for prefetchable and non- prefetchable address space, it is up to the AHB master requesting PCI data to determine access type. Memory space is mapped 1:1. The GRPCI2 core can be configured in 4 different IRQ modes, where PCI Interrupt, Error Interrupt and DMA Interrupt are shared on a single IRQ line or at most 5 IRQs are used. The GRPCI2 can mask/unmask PCI interrupts, Err and DMA in the control and check status bits which tells us which IRQ really happended. The GENIRQ layer is used to unmask/mask each individual IRQ source by creating virtual IRQs and implementing a IRQ chip. The optional DMA functionality of the GRPCI2 is not supported by this patch. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc32,leon: added LEON-common low-level PCI routinesDaniel Hellstrom2011-06-022-0/+45
| | | | | | | | | The LEON architecture does not have a BIOS or bootloader that initializes PCI for us, instead Linux generic PCI layer is used to set up resources and IRQ. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc32: added CONFIG_PCIC_PCI Kconfig settingDaniel Hellstrom2011-06-021-1/+1
| | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ns: Wire up the setns system callEric W. Biederman2011-05-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 32bit and 64bit on x86 are tested and working. The rest I have looked at closely and I can't find any problems. setns is an easy system call to wire up. It just takes two ints so I don't expect any weird architecture porting problems. While doing this I have noticed that we have some architectures that are very slow to get new system calls. cris seems to be the slowest where the last system calls wired up were preadv and pwritev. avr32 is weird in that recvmmsg was wired up but never declared in unistd.h. frv is behind with perf_event_open being the last syscall wired up. On h8300 the last system call wired up was epoll_wait. On m32r the last system call wired up was fallocate. mn10300 has recvmmsg as the last system call wired up. The rest seem to at least have syncfs wired up which was new in the 2.6.39. v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com> v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com> v4: Moved wiring up of the system call to another patch v5: ported to v2.6.39-rc6 v6: rebased onto parisc-next and net-next to avoid syscall conflicts. v7: ported to Linus's latest post 2.6.39 tree. >  arch/blackfin/include/asm/unistd.h     |    3 ++- >  arch/blackfin/mach-common/entry.S      |    1 + Acked-by: Mike Frysinger <vapier@gentoo.org> Oh - ia64 wiring looks good. Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sparc: mmu_gather reworkPeter Zijlstra2011-05-254-90/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework the sparc mmu_gather usage to conform to the new world order :-) Sparc mmu_gather does two things: - tracks vaddrs to unhash - tracks pages to free Split these two things like powerpc has done and keep the vaddrs in per-cpu data structures and flush them on context switch. The remaining bits can then use the generic mmu_gather. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds2011-05-2215-75/+123
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (28 commits) sparc32: fix build, fix missing cpu_relax declaration SCHED_TTWU_QUEUE is not longer needed since sparc32 now implements IPI sparc32,leon: Remove unnecessary page_address calls in LEON DMA API. sparc: convert old cpumask API into new one sparc32, sun4d: Implemented SMP IPIs support for SUN4D machines sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines sparc32,leon: Implemented SMP IPIs for LEON CPU sparc32: implement SMP IPIs using the generic functions sparc32,leon: SMP power down implementation sparc32,leon: added some SMP comments sparc: add {read,write}*_be routines sparc32,leon: don't rely on bootloader to mask IRQs sparc32,leon: operate on boot-cpu IRQ controller registers sparc32: always define boot_cpu_id sparc32: removed unused code, implemented by generic code sparc32: avoid build warning at mm/percpu.c:1647 sparc32: always register a PROM based early console sparc32: probe for cpu info only during startup sparc: consolidate show_cpuinfo in cpu.c sparc32,leon: implement genirq CPU affinity ...
| * sparc32: fix build, fix missing cpu_relax declarationSam Ravnborg2011-05-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following sparc (32 bit) build error: CC arch/sparc/kernel/asm-offsets.s In file included from include/linux/seqlock.h:29:0, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:57, from arch/sparc/kernel/asm-offsets.c:13: include/linux/spinlock.h: In function 'spin_unlock_wait': include/linux/spinlock.h:360:2: error: implicit declaration of function 'cpu_relax' Most likely caused by commit e66eed651fd1 ("list: remove prefetching from regular list iterators") due to include changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'master' of ↵David S. Miller2011-05-201-0/+13
| |\ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
| | * sparc: add {read,write}*_be routinesJan Andersson2011-05-121-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds {read,write}*_be big endian memory access routines to the io.h header used on SPARC32 and SPARC64. Tested on SPARC32 (LEON) Signed-off-by: Jan Andersson <jan@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc: convert old cpumask API into new oneKOSAKI Motohiro2011-05-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapt new API. Almost change is trivial, most important change are to remove following like =operator. cpumask_t cpu_mask = *mm_cpumask(mm); cpus_allowed = current->cpus_allowed; Because cpumask_var_t is =operator unsafe. These usage might prevent kernel core improvement. No functional change. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32,leon: Implemented SMP IPIs for LEON CPUDaniel Hellstrom2011-05-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements SMP IPIs on LEON using software generated IRQs to signal between CPUs. The IPI IRQ number is set by using the ipi_num property in the device tree, or defaults to 13. LEON SMP systems should reserve IRQ 13 (and IRQ 15) to Linux in order for the defaults to work. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32: implement SMP IPIs using the generic functionsDaniel Hellstrom2011-05-162-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current sparc32 SMP IPI generation is implemented the cross call function. The cross call function uses IRQ15 the NMI, this is has the effect that IPIs will interrupt IRQ critical areas and hang the system. Typically on/after spin_lock_irqsave calls can be aborted. The cross call functionality must still exist to flush cache/TLBS. This patch provides CPU models a custom way to implement generation of IPIs on the generic code's request. The typical approach is to generate an IRQ for each IPI case. After this patch each sparc32 SMP CPU model needs to implement IPIs in order to function properly. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32,leon: added some SMP commentsDaniel Hellstrom2011-05-162-0/+14
| | | | | | | | | | | | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32: always define boot_cpu_idDaniel Hellstrom2011-04-211-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define boot_cpu_id in single-processor kernels as well. This is to support architectures which can boot on other than CPU0. Sam Ravnborg has written the cleanup parts by extracting boot_cpu_id from smp_32.c into setup_32.c and cleaned up sun4d_irq.c. boot_cpu_id was initialized before BSS was cleared in sun4c_continue_boot, instead boot_cpu_id is set to 0xff to avoid BSS. If boot_cpu_id is untouched (0xff) by bootup code it will be overwritten to 0. boot_cpu_id4 is automatically calculated in common code. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32: avoid build warning at mm/percpu.c:1647Sam Ravnborg2011-04-211-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix following warning: mm/percpu.c: In function 'pcpu_embed_first_chunk': mm/percpu.c:1647:3: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'unsigned int' Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> [sam: added warning message to changelog, use _AC()] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32: probe for cpu info only during startupSam Ravnborg2011-04-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We did a cpu_probe() call each time a CPU got online - which only effect was to save latest CPU/FPU info for use by show_cpuinfo(). Use same setup as for sparc64 where we probe for this info during startup, and only once. This allowed us to annotate a few functions __init which again fixed the following section mismatch warnings: WARNING: vmlinux.o(.text+0x65f0): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown) WARNING: vmlinux.o(.text+0x65f8): Section mismatch in reference from the function set_cpu_and_fpu() to the (unknown reference) .init.rodata:(unknown) WARNING: vmlinux.o(.text+0x664c): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info WARNING: vmlinux.o(.text+0x6650): Section mismatch in reference from the function set_cpu_and_fpu() to the variable .init.rodata:manufacturer_info Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc: consolidate show_cpuinfo in cpu.cSam Ravnborg2011-04-213-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | We have all the cpu related info in cpu.c - so move the remaining functions to support /proc/cpuinfo to this file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32,leon: cleaned away code from the LEON2 daysDaniel Hellstrom2011-04-211-23/+0
| | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32,leon: per-cpu ticker use genirq per-cpu handlerDaniel Hellstrom2011-04-211-2/+4
| | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32,leon: add support for extended interrupt controllerDaniel Hellstrom2011-04-211-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The extended IRQ controller gives the LEON 16 more IRQs. The patch installs a custom handler for the exetended controller IRQ, where a register is read and the "real" IRQ causing IRQ is determined. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32: genirq supportSam Ravnborg2011-04-193-17/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sparc32: cleanup code for pci initSam Ravnborg2011-04-191-3/+9
| |/ | | | | | | | | | | | | | | Move the ifdeffery to a header file to make the logic more obvious where we decide between PCI or SBUS init Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2011-05-201-1/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
| * | net: Add sendmmsg socket system callAnton Blanchard2011-05-051-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a multiple message send syscall and is the send version of the existing recvmmsg syscall. This is heavily based on the patch by Arnaldo that added recvmmsg. I wrote a microbenchmark to test the performance gains of using this new syscall: http://ozlabs.org/~anton/junkcode/sendmmsg_test.c The test was run on a ppc64 box with a 10 Gbit network card. The benchmark can send both UDP and RAW ethernet packets. 64B UDP batch pkts/sec 1 804570 2 872800 (+ 8 %) 4 916556 (+14 %) 8 939712 (+17 %) 16 952688 (+18 %) 32 956448 (+19 %) 64 964800 (+20 %) 64B raw socket batch pkts/sec 1 1201449 2 1350028 (+12 %) 4 1461416 (+22 %) 8 1513080 (+26 %) 16 1541216 (+28 %) 32 1553440 (+29 %) 64 1557888 (+30 %) We see a 20% improvement in throughput on UDP send and 30% on raw socket send. [ Add sparc syscall entries. -DaveM ] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| |
| \
*-. \ Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of ↵Linus Torvalds2011-05-191-1/+5
|\ \ \ | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits) sched: Fix and optimise calculation of the weight-inverse sched: Avoid going ahead if ->cpus_allowed is not changed sched, rt: Update rq clock when unthrottling of an otherwise idle CPU sched: Remove unused parameters from sched_fork() and wake_up_new_task() sched: Shorten the construction of the span cpu mask of sched domain sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG sched: Remove unused 'this_best_prio arg' from balance_tasks() sched: Remove noop in alloc_rt_sched_group() sched: Get rid of lock_depth sched: Remove obsolete comment from scheduler_tick() sched: Fix sched_domain iterations vs. RCU sched: Next buddy hint on sleep and preempt path sched: Make set_*_buddy() work on non-task entities sched: Remove need_migrate_task() sched: Move the second half of ttwu() to the remote cpu sched: Restructure ttwu() some more sched: Rename ttwu_post_activation() to ttwu_do_wakeup() sched: Remove rq argument from ttwu_stat() sched: Remove rq->lock from the first half of ttwu() sched: Drop rq->lock from sched_exec() ... * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix rt_rq runtime leakage bug
| * | sched, sparc64: Turn cpu_coregroup_mask() into a real functionStephen Rothwell2011-04-121-1/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This compile error triggers on Sparc64: kernel/sched.c:7140: error: 'cpu_coregroup_mask' undeclared here (not in a function) Because after the recent scheduler domain cleanups the scheduler uses this arch method as a function pointer in a scheduler topology data structure - which is not possible with a macro. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20110412140040.3020ef55.sfr@canb.auug.org.au Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'tip/perf/core' of ↵Ingo Molnar2011-04-271-11/+14
|\ \ | |/ |/| | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core Conflicts: include/linux/perf_event.h Merge reason: pick up the latest jump-label enhancements, they are cooked ready. Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * jump label: Introduce static_branch() interfaceJason Baron2011-04-041-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce: static __always_inline bool static_branch(struct jump_label_key *key); instead of the old JUMP_LABEL(key, label) macro. In this way, jump labels become really easy to use: Define: struct jump_label_key jump_key; Can be used as: if (static_branch(&jump_key)) do unlikely code enable/disale via: jump_label_inc(&jump_key); jump_label_dec(&jump_key); that's it! For the jump labels disabled case, the static_branch() becomes an atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(), atomic_dec() operations. We show testing results for this change below. Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct. Since we now require a 'struct jump_label_key *key', we can store a pointer into the jump table addresses. In this way, we can enable/disable jump labels, in basically constant time. This change allows us to completely remove the previous hashtable scheme. Thanks to Peter Zijlstra for this re-write. Testing: I ran a series of 'tbench 20' runs 5 times (with reboots) for 3 configurations, where tracepoints were disabled. jump label configured in avg: 815.6 jump label *not* configured in (using atomic reads) avg: 800.1 jump label *not* configured in (regular reads) avg: 803.4 Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110316212947.GA8792@redhat.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Suggested-by: H. Peter Anvin <hpa@linux.intel.com> Tested-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* | Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds2011-04-074-13/+13
|\ \ | | | | | | | | | | | | * 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
| * | Fix common misspellingsLucas De Marchi2011-03-314-13/+13
| |/ | | | | | | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* | sparc: Hook up syncfs system call.David S. Miller2011-03-291-1/+2
|/ | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* remove dma64_addr_tFUJITA Tomonori2011-03-231-18/+0
| | | | | | | | | | | | | There is no user now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: David Miller <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* bitops: remove minix bitops from asm/bitops.hAkinobu Mita2011-03-232-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | minix bit operations are only used by minix filesystem and useless by other modules. Because byte order of inode and block bitmaps is different on each architecture like below: m68k: big-endian 16bit indexed bitmaps h8300, microblaze, s390, sparc, m68knommu: big-endian 32 or 64bit indexed bitmaps m32r, mips, sh, xtensa: big-endian 32 or 64bit indexed bitmaps for big-endian mode little-endian bitmaps for little-endian mode Others: little-endian bitmaps In order to move minix bit operations from asm/bitops.h to architecture independent code in minix filesystem, this provides two config options. CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k. CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu, m32r, mips, sh, xtensa). The architectures which always use little-endian bitmaps do not select these options. Finally, we can remove minix bit operations from asm/bitops.h for all architectures. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* bitops: remove ext2 non-atomic bitops from asm/bitops.hAkinobu Mita2011-03-232-2/+0
| | | | | | | | | | | | As the result of conversions, there are no users of ext2 non-atomic bit operations except for ext2 filesystem itself. Now we can put them into architecture independent code in ext2 filesystem, and remove from asm/bitops.h for all architectures. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* bitops: introduce little-endian bitops for most architecturesAkinobu Mita2011-03-232-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce little-endian bit operations to the big-endian architectures which do not have native little-endian bit operations and the little-endian architectures. (alpha, avr32, blackfin, cris, frv, h8300, ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa) These architectures can just include generic implementation (asm-generic/bitops/le.h). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* add the common dma_addr_t typedef to include/linux/types.hFUJITA Tomonori2011-03-221-4/+0
| | | | | | | | | | | | | | | | | | | | | | All architectures can use the common dma_addr_t typedef now. We can remove the arch specific dma_addr_t. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: NUMA aware alloc_thread_info_node()Eric Dumazet2011-03-222-15/+15
| | | | | | | | | | | | | | | | | | | Add a node parameter to alloc_thread_info(), and change its name to alloc_thread_info_node() This change is needed to allow NUMA aware kthread_create_on_cpu() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sparc: Add {open_by,name_to}_handle_at and clock_adjtime syscalls.David S. Miller2011-03-181-1/+4
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* sparc: Provide NO_IRQ definition.David S. Miller2011-03-182-0/+5
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2011-03-171-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits) KVM: unbreak userspace that does not sets tss address KVM: MMU: cleanup pte write path KVM: MMU: introduce a common function to get no-dirty-logged slot KVM: fix rcu usage in init_rmode_* functions KVM: fix kvmclock regression due to missing clock update KVM: emulator: Fix permission checking in io permission bitmap KVM: emulator: Fix io permission checking for 64bit guest KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n KVM: x86: Remove useless regs_page pointer from kvm_lapic KVM: improve comment on rcu use in irqfd_deassign KVM: MMU: remove unused macros KVM: MMU: cleanup page alloc and free KVM: MMU: do not record gfn in kvm_mmu_pte_write KVM: MMU: move mmu pages calculated out of mmu lock KVM: MMU: set spte accessed bit properly KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits KVM: Start lock documentation KVM: better readability of efer_reserved_bits KVM: Clear async page fault hash after switching to real mode KVM: VMX: Initialize vm86 TSS only once. ...
| * mm: make __get_user_pages return -EHWPOISON for HWPOISON page optionallyHuang Ying2011-03-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make __get_user_pages return -EHWPOISON for HWPOISON page only if FOLL_HWPOISON is specified. With this patch, the interested callers can distinguish HWPOISON pages from general FAULT pages, while other callers will still get -EFAULT for all these pages, so the user space interface need not to be changed. This feature is needed by KVM, where UCR MCE should be relayed to guest for HWPOISON page, while instruction emulation and MMIO will be tried for general FAULT page. The idea comes from Andrew Morton. Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* | sparc32: fix build with leon or floppy enabledSam Ravnborg2011-03-161-3/+0
| | | | | | | | | | | | | | | | Add a few includes back required to build with floppy enabled Fix declaration of trapbase_cpu* so it is now consistent Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sparc32: add irq + smp declarations to headersSam Ravnborg2011-03-162-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for cleaning up a number of files add declarations for irq and smp related data/functions to the relevant headers. This showed that the extern declaration of cputypval differed in the two files where it was used. As cputypval is defined like this: cputypval: .asciz "sun4c" the correct representation is a char array. Fix users to use the new declaration. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | SPARC/LEON: power down instruction different of different LEONsDaniel Hellstrom2011-03-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The way a LEON is powered down is implemented differently depending on CHIP type. The AMBA Plug&Play system ID tells revision of GRLIB and CHIP. This is for example needed by the GR-LEON4-ITX board and the UT699. Previously the power down support for LEON was limited to SMP, now both SMP and UP systems use the instruction. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | sparc64: rename virt_irq => irq - IISam Ravnborg2011-03-161-9/+9
|/ | | | | | | | | | | The generic irq support uses the term 'irq' for the allocated irq number. Fix it so sparc64 use the same term for an irq as the generic irq support does. For a naive reader this is less confusing. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-03-161-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
| * dt/sparc: Eliminate users of of_platform_{,un}register_driverGrant Likely2011-02-281-3/+3
| | | | | | | | | | | | | | | | | | Get rid of old users of of_platform_driver in arch/sparc. Most of_platform_driver users can be converted to use the platform_bus directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge branch 'tty-next' of ↵Linus Torvalds2011-03-161-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits) pch_uart: reference clock on CM-iTC pch_phub: add new device ML7213 n_gsm: fix UIH control byte : P bit should be 0 n_gsm: add a documentation serial: msm_serial_hs: Add MSM high speed UART driver tty_audit: fix tty_audit_add_data live lock on audit disabled tty: move cd1865.h to drivers/staging/tty/ Staging: tty: fix build with epca.c driver pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Staging: generic_serial: fix double locking bug nozomi: don't use flush_scheduled_work() tty/serial: Relax the device_type restriction from of_serial MAINTAINERS: Update HVC file patterns tty: phase out of ioctl file pointer for tty3270 as well tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile pch_uart: Fix DMA channel miss-setting issue. pch_uart: fix exclusive access issue pch_uart: fix auto flow control miss-setting issue pch_uart: fix uart clock setting issue pch_uart : Use dev_xxx not pr_xxx ... Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied twice, then changes to the same area in one branch)
| * \ Merge 2.6.38-rc6 into tty-nextGreg Kroah-Hartman2011-02-241-0/+2
| |\ \ | | |/ | | | | | | | | | | | | | | | This was to resolve a merge issue with drivers/char/Makefile and drivers/tty/serial/68328serial.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud