summaryrefslogtreecommitdiffstats
path: root/arch/s390
Commit message (Collapse)AuthorAgeFilesLines
* KVM: s390: Verify memory in kvm runCarsten Otte2009-06-101-0/+6
| | | | | | | | | | | This check verifies that the guest we're trying to run in KVM_RUN has some memory assigned to it. It enters an endless exception loop if this is not the case. Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: s390: Sanity check on validity interceptCarsten Otte2009-06-101-10/+18
| | | | | | | | | | | | | This patch adds a sanity check for the content of the guest prefix register content before faulting in the cpu lowcore that it refers to. The guest might end up in an endless loop where SIE complains about missing lowcore with incorrect content of the prefix register without this fix. Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: s390: Unlink vcpu on destroy - v2Carsten Otte2009-06-101-2/+8
| | | | | | | | | | | | This patch makes sure we do unlink a vcpu's sie control block from the system control area in kvm_arch_vcpu_destroy. This prevents illegal accesses to the sie control block from other virtual cpus after free. Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: s390: optimize float int lock: spin_lock_bh --> spin_lockChristian Borntraeger2009-06-104-22/+22
| | | | | | | | | The floating interrupt lock is only taken in process context. We can replace all spin_lock_bh with standard spin_lock calls. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: s390: use hrtimer for clock wakeup from idle - v2Christian Borntraeger2009-06-104-14/+35
| | | | | | | | | | | | | | | | | This patch reworks the s390 clock comparator wakeup to hrtimer. The clock comparator is a per-cpu value that is compared against the TOD clock. If ckc <= TOD an external interrupt 1004 is triggered. Since the clock comparator and the TOD clock have a much higher resolution than jiffies we should use hrtimers to trigger the wakeup. This speeds up guest nanosleep for small values. Since hrtimers callbacks run in hard-irq context, I added a tasklet to do the actual work with enabled interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: s390: Fix memory slot versus run - v3Carsten Otte2009-06-101-5/+31
| | | | | | | | | | | | | | | | | | | | | | | This patch fixes an incorrectness in the kvm backend for s390. In case virtual cpus are being created before the corresponding memory slot is being registered, we need to update the sie control blocks for the virtual cpus. *updates in v3* In consideration of the s390 memslot constraints locking was changed to trylock. These locks should never be held, as vcpu's can't run without the single memslot we just assign when running this code. To ensure this never deadlocks in case other code changes the code uses trylocks and bail out if it can't get all locks. Additionally most of the discussed special conditions for s390 like only one memslot and no user_alloc are now checked for validity in kvm_arch_set_memory_region. Reported-by: Mijo Safradin <mijo@linux.vnet.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Ehrhardt <ehrhardt@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Fix interrupt unhalting a vcpu when it shouldn'tGleb Natapov2009-06-101-0/+6
| | | | | | | | kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking if interrupt window is actually opened. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* s390: convert to use __HEAD and HEAD_TEXT macros.Tim Abbott2009-04-262-3/+4
| | | | | | | | | | | | This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [S390] update default configuration.Martin Schwidefsky2009-04-231-13/+50
| | | | Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] /proc/stat idle field for idle cpusMartin Schwidefsky2009-04-232-0/+20
| | | | | | | | | | | | | The cpu idle field in the output of /proc/stat is too small for cpus that have been idle for more than a tick. Add the architecture hook arch_idle_time that allows to add the not accounted idle time of a sleeping cpu without waking the cpu. The s390 implementation of arch_idle_time uses the already existing s390_idle_data per_cpu variable to find the sleep time of a neighboring idle cpu. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] appldata: avoid deadlock with appldata_memGerald Schaefer2009-04-232-17/+17
| | | | | | | | | | The appldata_ops callbacks are called with a spin_lock held. But the appldata_mem callback then calls all_vm_events(), which calls get_online_cpus(), which might sleep. This possible deadlock is fixed by using a mutex instead of a spin_lock. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] ipl: fix compile breakageHeiko Carstens2009-04-231-0/+1
| | | | | | | | | | | Fix this for !CONFIG_SMP: arch/s390/kernel/ipl.c: In function 'stop_run': arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor' Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* clocksource: pass clocksource to read() callbackMagnus Damm2009-04-211-1/+1
| | | | | | | | | | | | | | Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Separate out common fstatat code into vfs_fstatatOleg Drokin2009-04-201-13/+5
| | | | | | | | | | This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [S390] boot cputime accountingMartin Schwidefsky2009-04-144-17/+43
| | | | | | | | | | Start the cpu time accounting very early to catch the cpu time spent for the initial kernel setup. To make the output of /proc/uptime match the sum of all cpu accounting values of the boot cpu reset xtime and wall_to_monotonic to sane values based on the TOD clock. The values set by timekeeping_init are off by up to a second. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add read_persistent_clockMartin Schwidefsky2009-04-144-21/+35
| | | | | | | | | Add a read_persistent_clock function that does not just return 0. Since timekeeping_init calls the function before time_init has been called move reset_tod_clock to early.c to make sure that the TOD clock is running when read_persistent_clock is invoked. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cpu hotplug and accounting valuesMartin Schwidefsky2009-04-143-0/+28
| | | | | | | Reset the cpu timer to the maximum value and correctly initialize the cpu accounting values in the lowcore when the cpu is started. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] fix idle time accountingMartin Schwidefsky2009-04-141-0/+2
| | | | | | | | | | | | | The steal time is calculated by subtracting the time the virtual cpu has been running on a physical cpu from the wall clock time. To make that work all wall time needs to be added to the steal time field first before the virtual cpu time is subtracted. The time between the last clock update and the load of the enabled wait psw needs to be added to the steal_time field as well to make the sum over all cpu accounting numbers match the wall clock. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] smp: fix cpu_possible_map initializationHeiko Carstens2009-04-141-1/+2
| | | | | | | | | | | | | | | | | The cpu_possible_map by default is initialized with all ones in s390. If the kernel paramert possible_cpus=<x> is passed the cpu_possible_map is supposed to have x bits set. However the current code just sets the x bits without clearing the NR_CPUS bits that were already set. So we end up with an unchanged map that has all bits set. To fix this just clear the map before setting any new bits. This broke with def6cfb70bab83c0094bc0cedd27c4eda563043e "[S390] cpumask: Use accessors code." Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] appldata: Use new mod_virt_timer_periodic() function.Gerald Schaefer2009-04-141-1/+1
| | | | | | | | | | | | | mod_virt_timer() was used to modify/add cpu timers for cpus that were set online. This resulted in a one-shot timer for every cpu that was newly added or previously set offline, instead of an interval timer, which broke the appldata vtime interval setup. To fix this, the new mod_virt_timer_periodic() function is used, which adds interval timers instead of one-shot timers. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] extend virtual timer interface by mod_virt_timer_periodicJan Glauber2009-04-142-24/+34
| | | | | | | | | | | | In case mod_virt_timer is used to add a non pending timer the timer is always added as a one-shot timer. If mod_virt_timer is used for periodic timers they may therfore be degraded to one-shot timers. Add mod_virt_timer_periodic to the interface to allow safe re-programming of the interval value. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] stp synchronization retry timerMartin Schwidefsky2009-04-141-0/+15
| | | | | | | Add a timer that retries the clock synchronization via the server time protocol if there is a usable clock but the synchronization failed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] call nmi_enter/nmi_exit on machine checksHeiko Carstens2009-04-141-2/+3
| | | | | | | | nmi_enter/nmi_exit includes the lockdep calls and various other calls which were missing so far. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] wire up preadv/pwritev system callsHeiko Carstens2009-04-143-1/+23
| | | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] s390: move machine flags to lowcoreChristian Ehrhardt2009-04-1410-36/+56
| | | | | | | | | | | Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* mutex: have non-spinning mutexes on s390 by defaultHeiko Carstens2009-04-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: performance regression fix for s390 The adaptive spinning mutexes will not always do what one would expect on virtualized architectures like s390. Especially the cpu_relax() loop in mutex_spin_on_owner might hurt if the mutex holding cpu has been scheduled away by the hypervisor. We would end up in a cpu_relax() loop when there is no chance that the state of the mutex changes until the target cpu has been scheduled again by the hypervisor. For that reason we should change the default behaviour to no-spin on s390. We do have an instruction which allows to yield the current cpu in favour of a different target cpu. Also we have an instruction which allows us to figure out if the target cpu is physically backed. However we need to do some performance tests until we can come up with a solution that will do the right thing on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> LKML-Reference: <20090409184834.7a0df7b2@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'ipi-for-linus' of ↵Linus Torvalds2009-04-031-6/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: s390: remove arch specific smp_send_stop() panic: clean up kernel/panic.c panic, smp: provide smp_send_stop() wrapper on UP too panic: decrease oops_in_progress only after having done the panic generic-ipi: eliminate WARN_ON()s during oops/panic generic-ipi: cleanups generic-ipi: remove CSD_FLAG_WAIT generic-ipi: remove kmalloc() generic IPI: simplify barriers and locking
| * s390: remove arch specific smp_send_stop()Heiko Carstens2009-03-201-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Impact: build fix on s390 !CONFIG_SMP Remove arch specific smp_send_stop for !CONFIG_SMP since it conflicts with a new generic version. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LKML-Reference: <20090320092410.30d2bac3@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Allow rwlocks to re-enable interruptsRobin Holt2009-04-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the original flags to rwlock arch-code, so that it can re-enable interrupts if implemented for that architecture. Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs which just do the same thing as non-flags variants. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <linux-arch@vger.kernel.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Simplify copy_thread()Alexey Dobriyan2009-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | First argument unused since 2.3.11. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | generic debug pagealloc: build fixAkinobu Mita2009-04-021-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a build failure with generic debug pagealloc: mm/debug-pagealloc.c: In function 'set_page_poison': mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: In function 'clear_page_poison': mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: In function 'page_poison': mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: At top level: mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages' include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here mm/debug-pagealloc.c: In function 'kernel_map_pages': mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function) by fixing - debug_flags should be in struct page - define DEBUG_PAGEALLOC config option for all architectures Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2009-04-012-0/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: online_store - trigger recognition for boxed devices [S390] cio: disallow online setting of device in transient state [S390] cio: introduce notifier for boxed state [S390] cio: introduce ccw_device_schedule_sch_unregister [S390] cio: wake up on failed recognition [S390] fix hypfs build failure [PATCH] sysrq: include interrupt.h instead of irq.h
| * | [S390] cio: introduce notifier for boxed stateSebastian Ott2009-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a ccw device did not respond in time during internal io, we set it into boxed state. With this patch we have the following behaviour: * the ccw driver will get a notification if the device was online and goes into the boxed state * if the device was disconnected and got boxed nothing special is to be done (it will be handled in reprobing later) * if the device got boxed while initial sensing it will be unregistered Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] fix hypfs build failureHeiko Carstens2009-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build breakage below which probably was introduced with ("rcu: don't include unnecessary headers, allow kmemtrace w/ tracepoints"). CC arch/s390/hypfs/hypfs_diag.o arch/s390/hypfs/hypfs_diag.c: In function 'diag204_free_buffer': arch/s390/hypfs/hypfs_diag.c:364: error: implicit declaration of function 'free_pages' arch/s390/hypfs/hypfs_diag.c: In function 'diag204_alloc_rbuf': arch/s390/hypfs/hypfs_diag.c:384: error: implicit declaration of function '__get_free_pages' arch/s390/hypfs/hypfs_diag.c:384: error: 'GFP_KERNEL' undeclared (first use in this function) arch/s390/hypfs/hypfs_diag.c:384: error: (Each undeclared identifier is reported only once arch/s390/hypfs/hypfs_diag.c:384: error: for each function it appears in.) Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | generic debug pageallocAkinobu Mita2009-04-012-0/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and s390. This patch implements it for the rest of the architectures by filling the pages with poison byte patterns after free_pages() and verifying the poison patterns before alloc_pages(). This generic one cannot detect invalid page accesses immediately but invalid read access may cause invalid dereference by poisoned memory and invalid write access can be detected after a long delay. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-03-271-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits) fs: avoid I_NEW inodes Merge code for single and multiple-instance mounts Remove get_init_pts_sb() Move common mknod_ptmx() calls into caller Parse mount options just once and copy them to super block Unroll essentials of do_remount_sb() into devpts vfs: simple_set_mnt() should return void fs: move bdev code out of buffer.c constify dentry_operations: rest constify dentry_operations: configfs constify dentry_operations: sysfs constify dentry_operations: JFS constify dentry_operations: OCFS2 constify dentry_operations: GFS2 constify dentry_operations: FAT constify dentry_operations: FUSE constify dentry_operations: procfs constify dentry_operations: ecryptfs constify dentry_operations: CIFS constify dentry_operations: AFS ...
| * | generic compat_sys_ustatChristoph Hellwig2009-03-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a different size of ino_t ustat needs a compat handler, but currently only x86 and mips provide one. Add a generic compat_sys_ustat and switch all architectures over to it. Instead of doing various user copy hacks compat_sys_ustat just reimplements sys_ustat as it's trivial. This was suggested by Arnd Bergmann. Found by Eric Sandeen when running xfstests/017 on ppc64, which causes stack smashing warnings on RHEL/Fedora due to the too large amount of data writen by the syscall. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2009-03-2648-726/+1688
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits) [S390] remove duplicated #includes [S390] cpumask: use mm_cpumask() wrapper [S390] cpumask: Use accessors code. [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits. [S390] cpumask: remove cpu_coregroup_map [S390] fix clock comparator save area usage [S390] Add hwcap flag for the etf3 enhancement facility [S390] Ensure that ipl panic notifier is called late. [S390] fix dfp elf hwcap/facility bit detection [S390] smp: perform initial cpu reset before starting a cpu [S390] smp: fix memory leak on __cpu_up [S390] ipl: Improve checking logic and remove switch defaults. [S390] s390dbf: Remove needless check for NULL pointer. [S390] s390dbf: Remove redundant initilizations. [S390] use kzfree() [S390] BUG to BUG_ON changes [S390] zfcpdump: Prevent zcore from beeing built as a kernel module. [S390] Use csum_partial in checksum.h [S390] cleanup lowcore.h [S390] eliminate ipl_device from lowcore ...
| * | | [S390] remove duplicated #includesHuang Weiyi2009-03-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated #include's in arch/s390/kernel/ipl.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: use mm_cpumask() wrapperRusty Russell2009-03-263-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makes code futureproof against the impending change to mm->cpu_vm_mask. It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: Use accessors code.Rusty Russell2009-03-261-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: use new API Use the accessors rather than frobbing bits directly. Most of this is in arch code I haven't even compiled, but is straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.Rusty Russell2009-03-261-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup, futureproof In fact, all cpumask ops will only be valid (in general) for bit numbers < nr_cpu_ids. So use that instead of NR_CPUS in various places (I also updated the immediate sites to use the new cpumask_ operators). This is always safe: no cpu number can be >= nr_cpu_ids, and nr_cpu_ids is initialized to NR_CPUS at boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: remove cpu_coregroup_mapRusty Russell2009-03-262-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup cpu_coregroup_mask is the New Hotness. As S/390 uses theirs internally, so we just make it static. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] fix clock comparator save area usageHeiko Carstens2009-03-261-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lowcore clock comparator save area on 64 bit machines is defined to contain only the seven most significant bits of the register. That's also why it starts at an uneven address (0x1331). The current code however writes eight bytes to the address and therefore overwrites the first byte of the access register save area. Fix this and write only seven bytes to the save area. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Add hwcap flag for the etf3 enhancement facilityAndreas Krebbel2009-03-262-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Extended Translation Facility 3 (ETF3) added instructions which allow conversions between different unicode character maps (UTF-8, UTF-32 ...). These instructions got enhanced with a later version of the ETF3 allowing malformed multibyte chars to be recognized and reported correctly. The attached patch reserves bit 8 in the elf hwcaps vector for the enhanced version of ETF3. The bit corresponds to the stfle bits 22 and 30 and will only be set if both of the stfle bits are set. Signed-off-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Ensure that ipl panic notifier is called late.Michael Holzheu2009-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s390 ipl panic notifier will stop the system or trigger a system dump. This should be done as final action on the panic path. All other panic notifiers should be executed before. Currently we use priority 0 for the ipl notifier. In order to be called late, this patch changes the priority to INT_MIN which is the lowest possible priority. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] fix dfp elf hwcap/facility bit detectionChristian Ehrhardt2009-03-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old dfp detection wanted to check bit 43 (dfp high performance), but due to a wrong calculation always used to check bit 42. Additionally the "userspace expectation" is, that the dfp capability bit is set is if facility bit 42 (decimal floating point facility available) and bit 44 (perform floating point operation facility avail). The patch fixes the bit calculation and extends the check to work like: elf hw cap dfp bit = facility bits 42 (dfp) & 44 (pfpo) available Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] smp: perform initial cpu reset before starting a cpuHeiko Carstens2009-03-261-7/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Performing an initial cpu reset makes sure all registers and tlbs of the targeted cpu are initialized and flushed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] smp: fix memory leak on __cpu_upHeiko Carstens2009-03-262-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If sigp_set_prefix fails on __cpu_up we leak the lowcore structures and async+panic stacks for the failed cpu. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] ipl: Improve checking logic and remove switch defaults.Michael Holzheu2009-03-261-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A code analysis tool reported two warnings: "The expression `ipl_info.type == IPL_TYPE_FCP' is true whenever evaluated." and "Default is not possible". This patch improves the corresponding if statement logic and removes the unnecessary switch defaults. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
OpenPOWER on IntegriCloud