summaryrefslogtreecommitdiffstats
path: root/arch/s390/kvm
Commit message (Collapse)AuthorAgeFilesLines
* s390: fix save and restore of the floating-point-control registerMartin Schwidefsky2013-10-241-8/+15
| | | | | | | | | | | | | | | | | | | | | | The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/dis: move disassembler function prototypes to proper header fileHeiko Carstens2013-10-241-0/+1
| | | | | | | | Now that the in-kernel disassembler has an own header file move the disassembler related function prototypes to that header file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/time: correct use of store clock fastMartin Schwidefsky2013-10-221-3/+3
| | | | | | | | | | | | | | | | | The result of the store-clock-fast (STCKF) instruction is a bit fuzzy. It can happen that the value stored on one CPU is smaller than the value stored on another CPU, although the order of the stores is the other way around. This can cause deltas of get_tod_clock() values to become negative when they should not be. We need to be more careful with store-clock-fast, this patch partially reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time: always use stckf instead of stck if available". The get_tod_clock() function now uses the store-clock-extended (STCKE) instruction. get_tod_clock_fast() can be used if the fuzziness of store-clock-fast is acceptable e.g. for wait loops local to a CPU. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2013-09-044-31/+55
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull KVM updates from Gleb Natapov: "The highlights of the release are nested EPT and pv-ticketlocks support (hypervisor part, guest part, which is most of the code, goes through tip tree). Apart of that there are many fixes for all arches" Fix up semantic conflicts as discussed in the pull request thread.. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits) ARM: KVM: Add newlines to panic strings ARM: KVM: Work around older compiler bug ARM: KVM: Simplify tracepoint text ARM: KVM: Fix kvm_set_pte assignment ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256 ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs ARM: KVM: vgic: fix GICD_ICFGRn access ARM: KVM: vgic: simplify vgic_get_target_reg KVM: MMU: remove unused parameter KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate() KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX KVM: x86: update masterclock when kvmclock_offset is calculated (v2) KVM: PPC: Book3S: Fix compile error in XICS emulation KVM: PPC: Book3S PR: return appropriate error when allocation fails arch: powerpc: kvm: add signed type cast for comparation KVM: x86: add comments where MMIO does not return to the emulator KVM: vmx: count exits to userspace during invalid guest emulation KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp kvm: optimize away THP checks in kvm_is_mmio_pfn() ...
| * KVM: s390: Add helper function for setting condition codeThomas Huth2013-07-292-9/+13
| | | | | | | | | | | | | | | | | | Introduced a helper function for setting the CC in the guest PSW to improve the readability of the code. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * KVM: s390: Fix sparse warnings in priv.cThomas Huth2013-07-291-3/+3
| | | | | | | | | | | | | | | | | | sparse complained about the missing UL postfix for long constants. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * KVM: s390: declare virtual HW facilitiesMichael Mueller2013-07-293-15/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | The patch renames the array holding the HW facility bitmaps. This allows to interprete the variable as set of virtual machine specific "virtual" facilities. The basic idea is to make virtual facilities externally managable in future. An availability test for virtual facilites has been added as well. Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * KVM: Introduce kvm_arch_memslots_updated()Takuya Yoshikawa2013-07-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is called right after the memslots is updated, i.e. when the result of update_memslots() gets installed in install_new_memslots(). Since the memslots needs to be updated twice when we delete or move a memslot, kvm_arch_commit_memory_region() does not correspond to this exactly. In the following patch, x86 will use this new API to check if the mmio generation has reached its maximum value, in which case mmio sptes need to be flushed out. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * KVM: s390: use cookies for ioeventfdCornelia Huck2013-07-181-4/+13
| | | | | | | | | | | | | | | | | | Make use of cookies for the virtio ccw notification hypercall to speed up lookup of devices on the io bus. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> [Small fix to a comment. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds2013-09-041-4/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
| * | s390: Replace weird use of PTR_RET.Rusty Russell2013-07-151-4/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Saves repeating "(void __force *)__uptr" but it's less clear. Using the output of PTR_RET() to determine the error rather than just testing IS_ERR() is odd. For example, I *assume* __gptr_to_uptr() never returns NULL? Because the __ret would be 0 for the old code. The new version is clearer, IMHO: it would try to get_user() on that address. If you hate this variant, I can just s/PTR_RET/PTR_ERR_OR_ZERO/ instead. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* | KVM: s390: fix pfmf non-quiescing control handlingHeiko Carstens2013-07-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix the test within handle_pfmf() if the host has the NQ key-setting facility installed. Right now the code would incorrectly generate a program check in the guest if the NQ control bit for a pfmf request was set and if the host has the NQ key-setting facility installed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | KVM: s390: move kvm_guest_enter,exit closer to sieDominik Dingel2013-07-291-7/+14
|/ | | | | | | | | | | Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Fixed priority of execution in STSIThomas Huth2013-06-201-7/+16
| | | | | | | | | | | Added some missing validity checks for the operands and fixed the priority of exceptions for some function codes according to the "Principles of Operation" document. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Reworked LCTL and LCTLG instructionsThomas Huth2013-06-203-85/+81
| | | | | | | | | | | | | LCTL and LCTLG are also privileged instructions, thus there is no need for treating them separately from the other instructions in priv.c. So this patch moves these two instructions to priv.c, adds a check for supervisor state and simplifies the "handle_eb" instruction decoding by merging the two eb_handlers jump tables from intercept.c and priv.c into one table only. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Check for access exceptions during TPIThomas Huth2013-06-201-3/+4
| | | | | | | | | | | When a guest calls the TPI instruction, the second operand address could point to an invalid location. In this case the problem should be signaled to the guest by throwing an access exception. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Check for PSTATE when handling DIAGNOSEThomas Huth2013-06-201-0/+3
| | | | | | | | | | DIAGNOSE is a privileged instruction and thus we must make sure that we are in supervisor mode before taking any other actions. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Privileged operation checks moved to instruction handlersThomas Huth2013-06-201-24/+39
| | | | | | | | | | | | | | | We need more fine-grained control about the point in time when we check for privileged instructions, since the exceptions that can happen during an instruction have a well-defined priority. For example, for the PFMF instruction, the check for PGM_PRIVILEGED_OP must happen after the check for PGM_OPERATION since the latter has a higher precedence - thus the check for privileged operation must not be done in kvm_s390_handle_b9() already. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Privileged operation check for TPROTThomas Huth2013-06-201-0/+3
| | | | | | | | | | TPROT is a privileged instruction and thus should generate a privileged operation exception when the problem state bit is not cleared in the PSW. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Renamed PGM_PRIVILEGED_OPERATIONThomas Huth2013-06-202-11/+8
| | | | | | | | | | | Renamed the PGM_PRIVILEGED_OPERATION define to PGM_PRIVILEGED_OP since this define was way longer than the other PGM_* defines and caused the code often to exceed the 80 columns limit when not split to multiple lines. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Fix epsw instruction decodingThomas Huth2013-06-171-2/+1
| | | | | | | | | | | | The handle_epsw() function calculated the first register in the wrong way, so that it always used r0 by mistake. Now the code uses the common helper function for decoding the registers of rre functions instead to avoid such mistakes. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Use common waitqueueChristian Borntraeger2013-06-173-18/+18
| | | | | | | | | | | | Lets use the common waitqueue for kvm cpus on s390. By itself it is just a cleanup, but it should also improve the accuracy of diag 0x44 which is implemented via kvm_vcpu_on_spin. kvm_vcpu_on_spin has an explicit check for waiting on the waitqueue to optimize the yielding. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: code cleanup to use common vcpu slab cacheMichael Mueller2013-06-171-3/+3
| | | | | | | | | | cleanup of arch specific code to use common code provided vcpu slab cache instead of kzalloc() provided memory Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: guest large pagesChristian Borntraeger2013-06-173-4/+95
| | | | | | | | | | | | | This patch enables kvm to give large pages to the guest. The heavy lifting is done by the hardware, the host only has to take care of the PFMF instruction, which is also part of EDAT-1. We also support the non-quiescing key setting facility if the host supports it, to behave similar to the interpretation of sske. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: s390: Add "devname:kvm" alias.Cornelia Huck2013-06-031-0/+9
| | | | | | | | Providing a "devname:kvm" module alias enables automatic loading of the kvm module when /dev/kvm is opened. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
* s390/kvm: avoid automatic sie reentryMartin Schwidefsky2013-05-211-1/+3
| | | | | | | | | | Do not automatically restart the sie instruction in entry64.S after an interrupt, return to the caller with a reason code instead. That allows to deal with RCU and other conditions in C code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
* s390/kvm: Kick guests out of sie if prefix page host pte is touchedChristian Borntraeger2013-05-213-37/+52
| | | | | | | | | | | | | The guest prefix pages must be mapped writeable all the time while SIE is running, otherwise the guest might see random behaviour. (pinned at the pte level) Turns out that mlocking is not enough, the page table entry (not the page) might change or become r/o. This patch uses the gmap notifiers to kick guest cpus out of SIE. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
* s390/kvm: Provide a way to prevent reentering SIEChristian Borntraeger2013-05-212-0/+32
| | | | | | | | | | | | | | | | | Lets provide functions to prevent KVM from reentering SIE and to kick cpus out of SIE. We cannot use the common kvm_vcpu_kick code, since we need to kick out guests in places that hold architecture specific locks (e.g. pgste lock) which might be necessary on the other cpus - so no waiting possible. So lets provide a bit in a private field of the sie control block that acts as a gate keeper, after we claimed we are in SIE. Please note that we do not reuse prog0c, since we want to access that bit without atomic ops. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
* s390/kvm: fix psw rewinding in handle_skeyMartin Schwidefsky2013-05-211-1/+2
| | | | | | | | | The PSW can wrap if the guest has been running in the 24 bit or 31 bit addressing mode. Use __rewind_psw to find the correct address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
* KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in MakefilesMarc Zyngier2013-05-191-1/+2
| | | | | | | | | | | | | | | | | | | | As requested by the KVM maintainers, remove the addprefix used to refer to the main KVM code from the arch code, and replace it with a KVM variable that does the same thing. Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Christoffer Dall <cdall@cs.columbia.edu> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Alexander Graf <agraf@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
* Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2013-05-059-728/+318
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull kvm updates from Gleb Natapov: "Highlights of the updates are: general: - new emulated device API - legacy device assignment is now optional - irqfd interface is more generic and can be shared between arches x86: - VMCS shadow support and other nested VMX improvements - APIC virtualization and Posted Interrupt hardware support - Optimize mmio spte zapping ppc: - BookE: in-kernel MPIC emulation with irqfd support - Book3S: in-kernel XICS emulation (incomplete) - Book3S: HV: migration fixes - BookE: more debug support preparation - BookE: e6500 support ARM: - reworking of Hyp idmaps s390: - ioeventfd for virtio-ccw And many other bug fixes, cleanups and improvements" * tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) kvm: Add compat_ioctl for device control API KVM: x86: Account for failing enable_irq_window for NMI window request KVM: PPC: Book3S: Add API for in-kernel XICS emulation kvm/ppc/mpic: fix missing unlock in set_base_addr() kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write kvm/ppc/mpic: remove users kvm/ppc/mpic: fix mmio region lists when multiple guests used kvm/ppc/mpic: remove default routes from documentation kvm: KVM_CAP_IOMMU only available with device assignment ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ...
| * KVM: s390: Enable KVM_CAP_NR_MEMSLOTS on s390Nick Wang2013-04-021-0/+3
| | | | | | | | | | | | | | | | | | Return KVM_USER_MEM_SLOTS in kvm_dev_ioctl_check_extension(). Signed-off-by: Nick Wang <jfwang@us.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: Remove the sanity checks for kvm memory slotNick Wang2013-04-021-12/+4
| | | | | | | | | | | | | | | | | | | | | | To model the standby memory with memory_region_add_subregion and friends, the guest would have one or more regions of ram. Remove the check allowing only one memory slot and the check requiring the real address of memory slot starts at zero. Signed-off-by: Nick Wang <jfwang@us.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: fix compile with !CONFIG_COMPATHeiko Carstens2013-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/s390/kvm/priv.c should include both linux/compat.h and asm/compat.h. Fixes this one: In file included from arch/s390/kvm/priv.c:23:0: arch/s390/include/asm/compat.h: In function ‘arch_compat_alloc_user_space’: arch/s390/include/asm/compat.h:258:2: error: implicit declaration of function ‘is_compat_task’ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: fix stsi exception handlingHeiko Carstens2013-04-021-10/+10
| | | | | | | | | | | | | | | | | | In case of an exception the guest psw condition code should be left alone. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-By: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: fix and enforce return code handling for irq injectionsHeiko Carstens2013-04-024-73/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kvm_s390_inject_program_int() and friends may fail if no memory is available. This must be reported to the calling functions, so that this gets passed down to user space which should fix the situation. Alternatively we end up with guest state corruption. So fix this and enforce return value checking by adding a __must_check annotation to all of these function prototypes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: make if statements in lpsw/lpswe handlers readableHeiko Carstens2013-04-021-34/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Being unable to parse the 5- and 8-line if statements I had to split them to be able to make any sense of them and verify that they match the architecture. So change the code since I guess that other people will also have a hard time parsing such long conditional statements with line breaks. Introduce a common is_valid_psw() function which does all the checks needed. In case of lpsw (64 bit psw -> 128 bit psw conversion) it will do some not needed additional checks, since a couple of bits can't be set anyway, but that doesn't hurt. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: fix return code handling in lpsw/lpswe handlersHeiko Carstens2013-04-021-30/+14
| | | | | | | | | | | | | | | | | | | | | | kvm_s390_inject_program_int() may return with a non-zero return value, in case of an error (out of memory). Report that to the calling functions instead of ignoring the error case. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: fix psw conversion in lpsw handlerHeiko Carstens2013-04-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When converting a 64 bit psw to a 128 bit psw the addressing mode bit of the "addr" part of the 64 bit psw must be moved to the basic addressing mode bit of the "mask" part of the 128 bit psw. In addition the addressing mode bit must be cleared when moved to the "addr" part of the 128 bit psw. Otherwise an invalid psw would be generated if the orginal psw was in the 31 bit addressing mode. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: fix 24 bit psw handling in lpsw/lpswe handlerHeiko Carstens2013-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When checking for validity the lpsw/lpswe handler check that only the lower 20 bits instead of 24 bits have a non-zero value. There handling valid psws as invalid ones. Fix the 24 bit psw mask. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * KVM: s390: Dont do a gmap update on minor memslot changesChristian Borntraeger2013-04-021-0/+10
| | | | | | | | | | | | | | | | | | | | | | Some memslot updates dont affect the gmap implementation, e.g. setting/unsetting dirty tracking. Since a gmap update will cause tlb flushes and segment table invalidations we want to avoid that. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * s390/kvm,gaccess: add address space annotationsHeiko Carstens2013-03-074-41/+42
| | | | | | | | | | | | | | | | | | | | | | Add missing address space annotations to all put_guest()/get_guest() callers. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * s390/kvm: cleanup/fix handle_tpi()Heiko Carstens2013-03-071-24/+30
| | | | | | | | | | | | | | | | | | | | | | | | - add missing specification exception check - remove one level of indentation - use defines instead of magic numbers Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * s390/kvm,gaccess: shorten copy_to/from_guest codeHeiko Carstens2013-03-071-253/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The code can be significantly shortened. There is no functional change, except that for large (> PAGE_SIZE) copies the guest translation would be done more frequently. However, there is not a single user which does this currently. If one gets added later on this functionality can be added easily again. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * s390/kvm,gaccess: shorten put/get_guest codeHeiko Carstens2013-03-074-152/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The put_guest_u*/get_guest_u* are nothing but wrappers for the regular put_user/get_user uaccess functions. The only difference is that before accessing user space the guest address must be translated to a user space address. Change the order of arguments for the guest access functions so they match their uaccess parts. Also remove the u* suffix, so we simply have put_guest/get_guest which will automatically use the right size dependent on pointer type of the destination/source that now must be correct. In result the same behaviour as put_user/get_user except that accesses must be aligned. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * s390/kvm: remove explicit -EFAULT return code checking on guest accessHeiko Carstens2013-03-073-177/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's change to the paradigm that every return code from guest memory access functions that is not zero translates to -EFAULT and do not explictly compare. Explictly comparing the return value with -EFAULT has already shown to be a bit fragile. In addition this is closer to the handling of copy_to/from_user functions, which imho is in general a good idea. Also shorten the return code handling in interrupt.c a bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * s390/kvm,tprot: use new gmap_translate() functionHeiko Carstens2013-03-071-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When out-of-memory the tprot code incorrectly injected a program check for the guest which reported an addressing exception even if the guest address was valid. Let's use the new gmap_translate() which translates a guest address to a user space address whithout the chance of running into an out-of-memory situation. Also make it more explicit that for -EFAULT we won't find a vma. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * s390/kvm,gaccess: fix guest access return code handlingHeiko Carstens2013-03-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Guest access functions like copy_to/from_guest() call __guestaddr_to_user() which in turn call gmap_fault() in order to translate a guest address to a user space address. In error case __guest_addr_to_user() returns either -EFAULT or -ENOMEM. The copy_to/from_guest functions just pass these return values down to the callers. The -ENOMEM case however is problematic since there are several places which access guest memory like: rc = copy_to_guest(...); if (rc == -EFAULT) error_handling(); So in case of -ENOMEM the code assumes that the guest memory access succeeded even though it failed. This can cause guest data or state corruption. If __guestaddr_to_user() returns -ENOMEM the meaning is that a valid user space mapping exists, but there was not enough memory available when trying to build the guest mapping. In other words an out-of-memory situation occured. For normal user space accesses an out-of-memory situation causes the page fault handler to map -ENOMEM to -EFAULT (see fixup code in do_no_context()). We need to do exactly the same for the kvm gaccess functions. So __guestaddr_to_user() should just map all error codes to -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: s390: Wire up ioeventfd.Cornelia Huck2013-03-054-1/+29
| | | | | | | | | | | | | | | | Enable ioeventfd support on s390 and hook up diagnose 500 virtio-ccw notifications. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
| * KVM: set_memory_region: Refactor commit_memory_region()Takuya Yoshikawa2013-03-041-1/+2
| | | | | | | | | | | | | | | | | | | | This patch makes the parameter old a const pointer to the old memory slot and adds a new parameter named change to know the change being requested: the former is for removing extra copying and the latter is for cleaning up the code. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
OpenPOWER on IntegriCloud