summaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel/entry.S
Commit message (Collapse)AuthorAgeFilesLines
* s390: fix system call restart after inferior callMartin Schwidefsky2013-09-301-0/+1
| | | | | | | | | | | Git commit 616498813b11ffef "s390: system call path micro optimization" introduced a regression in regard to system call restarting and inferior function calls via the ptrace interface. The pointer to the system call table needs to be loaded in sysc_sigpending if do_signal returns with TIF_SYSCALl set after it restored a system call context. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/time: return with irqs disabled from psw_idleMartin Schwidefsky2013-08-281-2/+2
| | | | | | | | | Modify the psw_idle waiting logic in entry[64].S to return with interrupts disabled. This avoids potential issues with udelay and interrupt loops as interrupts are not reenabled after clock comparator interrupts. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: convert interrupt handling to use generic hardirqMartin Schwidefsky2013-08-221-3/+9
| | | | | | | | | | | | | | | | | | With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/irq: store interrupt information in pt_regsMartin Schwidefsky2013-06-261-2/+10
| | | | | | | | | | Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: system call path micro optimizationMartin Schwidefsky2013-04-261-2/+1
| | | | | | | | | | Add a pointer to the system call table to the thread_info structure. The TIF_31BIT bit is set or cleared by SET_PERSONALITY exactly once for the lifetime of a process. With the pointer to the correct system call table in thread_info the system call code in entry64.S path can drop the check for TIF_31BIT which saves a couple of instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: lowcore stack pointer offsetsMartin Schwidefsky2013-04-261-20/+16
| | | | | | | | Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: critical section cleanup vs. machine checksMartin Schwidefsky2013-03-051-1/+2
| | | | | | | | | | | | | | | | The current machine check code uses the registers stored by the machine in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted context. The registers 0-7 of a user process can get clobbered if a machine checks interrupts the execution of a critical section in entry[64].S. The reason is that the critical section cleanup code may need to modify the PSW and the registers for the previous context to get to the end of a critical section. If registers 0-7 have to be replaced the relevant copy will be in the registers, which invalidates the copy in the lowcore. The machine check handler needs to explicitly store registers 0-7 to the stack. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2012-12-131-4/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "Add support to generate code for the latest machine zEC12, MOD and XOR instruction support for the BPF jit compiler, the dasd safe offline feature and the big one: the s390 architecture gets PCI support!! Right before the world ends on the 21st ;-)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/qdio: rename the misleading PCI flag of qdio devices s390/pci: remove obsolete email addresses s390/pci: speed up __iowrite64_copy by using pci store block insn s390/pci: enable NEED_DMA_MAP_STATE s390/pci: no msleep in potential IRQ context s390/pci: fix potential NULL pointer dereference in dma_free_seg_table() s390/pci: use kmem_cache_zalloc instead of kmem_cache_alloc/memset s390/bpf,jit: add support for XOR instruction s390/bpf,jit: add support MOD instruction s390/cio: fix pgid reserved check vga: compile fix, disable vga for s390 s390/pci: add PCI Kconfig options s390/pci: s390 specific PCI sysfs attributes s390/pci: PCI hotplug support via SCLP s390/pci: CHSC PCI support for error and availability events s390/pci: DMA support s390/pci: PCI adapter interrupts for MSI/MSI-X s390/bitops: find leftmost bit instruction support s390/pci: CLP interface s390/pci: base support ...
| * s390/ptrace: race of single stepping vs signal deliveryMartin Schwidefsky2012-11-231-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current single step code is racy in regard to concurrent delivery of signals. If a signal is delivered after a PER program check occurred but before the TIF_PER_TRAP bit has been checked in entry[64].S the code clears TIF_PER_TRAP and then calls do_signal. This is wrong, if the instruction completed (or has been suppressed) a SIGTRAP should be delivered to the debugger in any case. Only if the instruction has been nullified the SIGTRAP may not be send. The new logic always sets TIF_PER_TRAP if the program check indicates PER tracing but removes it again for all program checks that are nullifying. The effect is that for each change in the PSW address we now get a single SIGTRAP. Reported-by: Andreas Arnez <arnez@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | s390: switch to saner kernel_execve() semanticsAl Viro2012-10-291-27/+5
|/ | | | | Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* s390: convert to generic kernel_execve()Al Viro2012-09-301-24/+6
| | | | | | same situation as with alpha and arm - only massage needed Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* s390: fold kernel_thread_helper() into ret_from_fork()Al Viro2012-09-301-3/+15
| | | | | | | ... and don't bother with syscall return path in case of kernel threads. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* s390: fold execve_tail() into start_thread(), convert to generic sys_execve()Al Viro2012-09-301-3/+0
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* s390/vtimer: rework virtual timer interfaceMartin Schwidefsky2012-07-201-23/+14
| | | | | | | | | | | | | | | | | The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/comments: unify copyright messages and remove file namesHeiko Carstens2012-07-201-2/+1
| | | | | | | | | | | | | | Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* s390/smp: make absolute lowcore / cpu restart parameter accesses more robustHeiko Carstens2012-06-141-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the cpu restart parameters is done in three different fashions: - directly setting the four parameters individually - copying the four parameters with memcpy (using 4 * sizeof(long)) - copying the four parameters using a private structure In addition code in entry*.S relies on a certain order of the restart members of struct _lowcore. Make all of this more robust to future changes by adding a mem_absolute_assign(dest, val) define, which assigns val to dest using absolute addressing mode. Also the load multiple instructions in entry*.S have been split into separate load instruction so the order of the struct _lowcore members doesn't matter anymore. In addition move the prototypes of memcpy_real/absolute from uaccess.h to processor.h. These memcpy* variants are not related to uaccess at all. string.h doesn't seem to match as well, so lets use processor.h. Also replace the eight byte array in struct _lowcore which represents a misaliged u64 with a u64. The compiler will always create code that handles the misaligned u64 correctly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390/sigp: use sigp order code defines in assembly codeHeiko Carstens2012-06-051-2/+3
| | | | | | | | | | Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* s390: fix race on TIF_MCCK_PENDINGMartin Schwidefsky2012-05-161-10/+11
| | | | | | | | | | | | | | | | There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] rework idle codeMartin Schwidefsky2012-03-111-6/+70
| | | | | | | | | | | | | | Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] rework smp codeMartin Schwidefsky2012-03-111-64/+17
| | | | | | | | | | | | | | | | | | | | | Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] rename lowcore fieldMartin Schwidefsky2012-03-111-1/+1
| | | | | | | | The 16 bit value at the lowcore location with offset 0x84 is the cpu address that is associated with an external interrupt. Rename the field from cpu_addr to ext_cpu_addr to make that clear. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup trap handlingMartin Schwidefsky2011-12-271-11/+11
| | | | | | | | | | | | Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] entry[64].S improvementsMartin Schwidefsky2011-12-271-618/+481
| | | | | | | | | Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add TIF_SYSCALL thread flagMartin Schwidefsky2011-10-301-41/+25
| | | | | | | | | | Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] signal race with restarting system callsMartin Schwidefsky2011-10-301-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] lowcore cleanupMartin Schwidefsky2011-10-301-2/+2
| | | | | | | Remove the save_area_64 field from the 0xe00 - 0xf00 area in the lowcore. Use a free slot in the save_area array instead. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Add PSW restart shutdown triggerMichael Holzheu2011-08-031-0/+28
| | | | | | | | | | | | | With this patch a new S390 shutdown trigger "restart" is added. If under z/VM "systerm restart" is entered or under the HMC the "PSW restart" button is pressed, the PSW located at 0 (31 bit) or 0x1a0 (64 bit) bit is loaded. Now we execute do_restart() that processes the restart action that is defined under /sys/firmware/shutdown_actions/on_restart. Currently the following actions are possible: reipl (default), stop, vmcmd, dump, and dump_reipl. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
* [S390] fix s390 assembler code alignmentsJan Glauber2011-07-241-21/+11
| | | | | | | | | | | | The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] pfault: cpu hotplug vs missing completion interruptsHeiko Carstens2011-05-231-0/+1
| | | | | | | | | | | | | | | | | On cpu hot remove a PFAULT CANCEL command is sent to the hypervisor which in turn will cancel all outstanding pfault requests that have been issued on that cpu (the same happens with a SIGP cpu reset). The result is that we end up with uninterruptible processes where the interrupt that would wake up these processes never arrives. In order to solve this all processes which wait for a pfault completion interrupt get woken up after a cpu hot remove. The worst case that could happen is that they fault again and in turn need to wait again. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] kernel: Initialize register 14 when starting new CPUMichael Holzheu2011-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When starting a new CPU we currently jump to start_secondary() without setting register 14 (the return address) correctly. Therefore on the stack frame for start_secondary an invalid return address is stored. This leads to wrong stack back traces in kernel dumps. Example: #00 [1f33fe48] cpu_idle at 10614a #01 [1f33fe90] start_secondary at 54fa88 #02 [1f33feb8] (null) at 0 <--- invalid To fix this start_secondary() is called now with basr/brasl that sets register 14 correctly. The output of the stack backtrace looks then like the following: #00 [1f33fe48] cpu_idle at 10614a #01 [1f33fe90] start_secondary at 54fa88 #02 [1f33feb8] restart_base at 54f41e <--- correct Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] ptrace cleanupMartin Schwidefsky2011-01-051-40/+30
| | | | | | | Overhaul program event recording and the code dealing with the ptrace user space interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] 31 bit entry.S update.Martin Schwidefsky2011-01-051-103/+109
| | | | | | | | Make the code in the 31 bit entry.S code as similar as possible to the 64 bit version in entry64.S. That makes it easier to add new code to the first level interrupt handler that affects both 31 and 64 bit kernels. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add kprobes annotationsMartin Schwidefsky2011-01-051-0/+4
| | | | | | | Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] fix kprobes single steppingMartin Schwidefsky2010-10-291-0/+1
| | | | | | | | | | Fix kprobes after git commit 1e54622e0403891b10f2105663e0f9dd595a1f17 broke it. The kprobe_handler is now called with interrupts in the state at the time of the breakpoint. The single step of the replaced instruction is done with interrupts off which makes it necessary to enable and disable the interupts in the kprobes code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup system call parameter setupMartin Schwidefsky2010-10-251-3/+3
| | | | | | | | Do the setup of the stack overflow argument for the sixth system call parameter right before the branch to the system call function. That simplifies the system call parameter access code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup lowcore access from external interruptsMartin Schwidefsky2010-10-251-1/+2
| | | | | | | Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup lowcore access from program checksMartin Schwidefsky2010-10-251-25/+10
| | | | | | | | | Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Fix IRQ tracing in case of PERHeiko Carstens2010-07-271-2/+10
| | | | | | | | | | | | | In case user space is single stepped (PER) the program check handler claims too early that IRQs are enabled on the return path. Subsequent checks will notice that the IRQ mask in the PSW and what lockdep thinks the IRQ mask should be do not correlate and therefore will print a warning to the console and disable lockdep. Fix this by doing all the work within the correct context. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] add breaking event address for user spaceMartin Schwidefsky2010-05-171-2/+2
| | | | | | | | | | | Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] idle time accounting vs. machine checksMartin Schwidefsky2010-05-171-28/+26
| | | | | | | | | | | | | | | A machine check can interrupt the i/o and external interrupt handler anytime. If the machine check occurs while the interrupt handler is waking up from idle vtime_start_cpu can get executed a second time and the int_clock / async_enter_timer values in the lowcore get clobbered. This can confuse the cpu time accounting. To fix this problem two changes are needed. First the machine check handler has to use its own copies of int_clock and async_enter_timer, named mcck_clock and mcck_enter_timer. Second the nested execution of vtime_start_cpu has to be prevented. This is done in s390_idle_check by checking the wait bit in the program status word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] improve irq tracing code in entry[64].SMartin Schwidefsky2010-05-171-114/+91
| | | | | | | | | | | | The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] cleanup sysc_work and io_work codeMartin Schwidefsky2010-05-171-47/+28
| | | | | | | Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] fix io_return critical section cleanupMartin Schwidefsky2010-04-091-1/+7
| | | | | | | | | | | | If a machine check interrupts the io interrupt handler on one of the instructions between io_return and io_leave the critical section cleanup code will move the return psw to io_work_loop. By doing that the switch from the asynchronous interrupt stack to the process stack is skipped. If e.g. TIF_NEED_RESCHED is set things break because the scheduler is called with the asynchronous interrupts stack. Moving the psw back to io_return instead fixes the problem. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Cleanup struct _lowcore usage and defines.Heiko Carstens2010-02-261-1/+0
| | | | | | | | | | | | Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] fix single stepped svcs with TRACE_IRQFLAGS=yMartin Schwidefsky2010-01-271-0/+1
| | | | | | | | | | | If irq flags tracing is enabled the TRACE_IRQS_ON macros expands to a function call which clobbers registers %r0-%r5. The macro is used in the code path for single stepped system calls. The argument registers %r2-%r6 need to be restored from the stack before the system call function is called. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] s390: fix single stepping on svc0Christian Borntraeger2009-11-131-4/+4
| | | | | | | | | | | | | | | On s390 there are two ways of specifying the system call number for the svc instruction. The standard way is to use the immediate field in the instruction (or to use EXecute for values unknown during assemble time). This can encode 256 system calls. The kernel ABI also allows to put the system call number in r1 and then execute svc 0 to enable system call numbers > 255. It turns out that single stepping svc 0 is broken, since the PER program check handler uses r1. We have to use a different register. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'tracing-core-for-linus' of ↵Linus Torvalds2009-09-111-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits) ring-buffer: only enable ring_buffer_swap_cpu when needed ring-buffer: check for swapped buffers in start of committing tracing: report error in trace if we fail to swap latency buffer tracing: add trace_array_printk for internal tracers to use tracing: pass around ring buffer instead of tracer tracing: make tracing_reset safe for external use tracing: use timestamp to determine start of latency traces tracing: Remove mentioning of legacy latency_trace file from documentation tracing/filters: Defer pred allocation, fix memory leak tracing: remove users of tracing_reset tracing: disable buffers and synchronize_sched before resetting tracing: disable update max tracer while reading trace tracing: print out start and stop in latency traces ring-buffer: disable all cpu buffers when one finds a problem ring-buffer: do not count discarded events ring-buffer: remove ring_buffer_event_discard ring-buffer: fix ring_buffer_read crossing pages ring-buffer: remove unnecessary cpu_relax ring-buffer: do not swap buffers during a commit ring-buffer: do not reset while in a commit ...
| * tracing: Rename FTRACE_SYSCALLS for tracepointsJosh Stone2009-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | s/HAVE_FTRACE_SYSCALLS/HAVE_SYSCALL_TRACEPOINTS/g s/TIF_SYSCALL_FTRACE/TIF_SYSCALL_TRACEPOINT/g The syscall enter/exit tracing is no longer specific to just ftrace, so they now have names that reflect their tie to tracepoints instead. Signed-off-by: Josh Stone <jistone@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> LKML-Reference: <1251150194-1713-2-git-send-email-jistone@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
* | [S390] move (io|sysc)_restore_trace_psw into .data sectionHendrik Brueckner2009-09-111-2/+14
|/ | | | | | | | | | | | | | | | The sysc_restore_trace_psw and io_restore_trace_psw storage locations are created in the .text section. When creating and IPLing from a named saved system (NSS), writing to these locations causes a protection exception (because the .text section is mapped as shared read-only in the NSS). To permit write access, move the storage locations into the .data section. The problem occurs only when CONFIG_TRACE_IRQFLAGS is set. The git commmit that has introduced these variables is: 411788ea7fca01ee803af8225ac35807b4d02050 Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] ftrace: add system call tracer supportHeiko Carstens2009-06-121-1/+3
| | | | | | | System call tracer support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
OpenPOWER on IntegriCloud