summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/85xx: Enable I2C_CHARDEV and I2C_MPC options in defconfigsShaveta Leekha2012-03-294-0/+5
| | | | | | | | | Enable I2C char dev interface for user space testing of I2C controler. Enable the I2C driver on 64-bit builds (corenet64_smp_defconfig) as it was missing. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: add the P1020UTM-PC DTS supportJerry Huang2012-03-293-0/+318
| | | | | Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: add the P1020MBG-PC DTS supportJerry Huang2012-03-293-0/+329
| | | | | Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/8xxx: remove 85xx/86xx restrictions from fsl_guts.hTimur Tabi2012-03-295-26/+10
| | | | | | | | | | | | | | Remove the check for CONFIG_PPC_85xx and CONFIG_PPC_86xx from fsl_guts.h. The check was originally intended to allow the same header file to be used on 85xx and 86xx systems, even though the Global Utilities register could be different. It turns out that they're not actually different, and so the check is not necessary. In addition, neither macro is defined for 64-bit e5500 kernels, so that causes a build break. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/perf: Fix instruction address sampling on 970 and Power4Benjamin Herrenschmidt2012-03-284-5/+45
| | | | | | | | | | | | | | 970 and Power4 don't support "continuous sampling" which means that when we aren't in marked instruction sampling mode (marked events), SIAR isn't updated with the last instruction sampled before the perf interrupt. On those processors, we must thus use the exception SRR0 value as the sampled instruction pointer. Those processors also don't support the SIPR and SIHV bits in MMCRA which means we need some kind of heuristic to decide if SIAR values represent kernel or user addresses. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc+sparc/vio: Modernize driver registrationBenjamin Herrenschmidt2012-03-282-5/+17
| | | | | | | | | | This makes vio_register_driver() get the module owner & name at compile time like PCI drivers do, and adds a name pointer directly in struct vio_driver to avoid having to explicitly initialize the embedded struct device. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David S. Miller <davem@davemloft.net>
* powerpc: Random little legacy iSeries removal tidy upsStephen Rothwell2012-03-2810-26/+5
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove NO_IRQ_IGNOREStephen Rothwell2012-03-283-11/+3
| | | | | | | Now that legacy iSeries is gone, this is no longer used. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Cut down on enthusiastic use of defines in RAS codeAnton Blanchard2012-03-281-25/+1
| | | | | | | | | So many defines for such a little file. Most of them can go. Also remove the single entry changelog, we have git for that. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Clean up ras_error_interrupt codeAnton Blanchard2012-03-281-19/+8
| | | | | | | | The RAS error interrupt is no longer used but we may as well mirror the changes we made to the EPOW interrupt. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Remove RTAS_POWERMGM_EVENTSAnton Blanchard2012-03-282-2/+1
| | | | | | | | IBM bit 2 in the rtas event-scan and check-exception calls is marked reserved in the PAPR, so remove it from our RAS code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Use rtas_get_sensor in RAS codeAnton Blanchard2012-03-281-4/+1
| | | | | | | We have rtas_get_sensor so we may as well use it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Parse and handle EPOW interruptsAnton Blanchard2012-03-281-17/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We have code to take environmental and power warning (EPOW) interrupts but it simply prints a terse error message: EPOW <0x6240040000000b8 0x0 0x0> which tells us nothing about what happened. Even worse, if we don't correctly respond to the interrupt we may get terminated by firmware. Add code to printk some useful information when we get EPOW events. We want to make it clear that we have an error, that it was reported by firmware and that the RTAS error log will have more detailed information. eg: Ambient temperature too high reported by firmware. Check RTAS error log for details Depending on the error encountered, we now issue an immediate or an orderly power down. Move initialization of the EPOW interrupt earlier in boot since we want to respond to them as early as possible. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Make function that parses RTAS error logs globalAnton Blanchard2012-03-283-66/+69
| | | | | | | | | | | | | | The IO event interrupt code has a function that finds specific sections in an RTAS error log. We want to use it in the EPOW code so make it global. Rename things to make it less cryptic: find_xelog_section() -> get_pseries_errorlog() struct pseries_elog_section -> struct pseries_errorlog Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/eeh: Retrieve PHB from global listGavin Shan2012-03-281-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the existing PHBs are retrieved from the FDT (Flat Device Tree) based on the name of FDT node. Specificly, those FDT nodes whose names have prefix "pci" are regarded as PHBs. That's inappropriate because some PCI bridges possibilly have names leading with "pci". It caused EEH is enabled on same PCI devices for towice. The patch fixes the above issue. Besides, the PHBs are expected to be figured out from FDT before enable EEH on them. Therefore, it's resonable to retrieve the PHBs from the global linked list traced by variable "hose_list" insteading poking them from FDT. For the EEH implementation on pSeries platform, RTAS is critical because all low-level functions are implemented based on RTAS. Therefore, we should make sure "/rtas" OF node is available and ready before to enable EEH core. However, it actually introduced duplicate since the previous pSeries platform dependent initialization function already do the check. Besides, we want to make eeh core platform independent, so RTAS related staff should be removed there. The patch removes the duplicate check on "/rtas" OF node for eeh core. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/eeh: Remove eeh information from pci_dnGavin Shan2012-03-282-24/+13
| | | | | | | | | | | The patch removes the eeh information from pci_dn since the eeh device (struct eeh_dev) already contained those information and the copy in pci_dn is no longer used except for the pseries iommu mapping code, which we change to retrieve the PE address from eeh device instead. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/eeh: Remove eeh device from OF nodeGavin Shan2012-03-282-1/+9
| | | | | | | | | | | | Originally, the PCI sensitive OF node is tracing the eeh device through struct device_node->edev. However, it was regarded as bad idea. The patch removes struct device_node->edev and uses PCI_DN to trace the corresponding eeh device according to BenH's comments. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge tag 'bug-for-3.4' of ↵Linus Torvalds2012-03-243-0/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/bug.h> cleanup from Paul Gortmaker: "The changes shown here are to unify linux's BUG support under the one <linux/bug.h> file. Due to historical reasons, we have some BUG code in bug.h and some in kernel.h -- i.e. the support for BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h, but old code in kernel.h wasn't moved to bug.h at that time. As a band-aid, kernel.h was including <asm/bug.h> to pseudo link them. This has caused confusion[1] and general yuck/WTF[2] reactions. Here is an example that violates the principle of least surprise: CC lib/string.o lib/string.c: In function 'strlcat': lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON' make[2]: *** [lib/string.o] Error 1 $ $ grep linux/bug.h lib/string.c #include <linux/bug.h> $ We've included <linux/bug.h> for the BUG infrastructure and yet we still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh - very confusing for someone who is new to kernel development. With the above in mind, the goals of this changeset are: 1) find and fix any include/*.h files that were relying on the implicit presence of BUG code. 2) find and fix any C files that were consuming kernel.h and hence relying on implicitly getting some/all BUG code. 3) Move the BUG related code living in kernel.h to <linux/bug.h> 4) remove the asm/bug.h from kernel.h to finally break the chain. During development, the order was more like 3-4, build-test, 1-2. But to ensure that git history for bisect doesn't get needless build failures introduced, the commits have been reorderd to fix the problem areas in advance. [1] https://lkml.org/lkml/2012/1/3/90 [2] https://lkml.org/lkml/2012/1/17/414" Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul and linux-next. * tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: kernel.h: doesn't explicitly use bug.h, so don't include it. bug: consolidate BUILD_BUG_ON with other bug code BUG: headers with BUG/BUG_ON etc. need linux/bug.h bug.h: add include of it to various implicit C users lib: fix implicit users of kernel.h for TAINT_WARN spinlock: macroize assert_spin_locked to avoid bug.h dependency x86: relocate get/set debugreg fcns to include/asm/debugreg.
| * bug.h: add include of it to various implicit C usersPaul Gortmaker2012-02-293-0/+3
| | | | | | | | | | | | | | | | | | With bug.h currently living right in linux/kernel.h there are files that use BUG_ON and friends but are not including the header explicitly. Fix them up so we can remove the presence in kernel.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds2012-03-231-8/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge second batch of patches from Andrew Morton: - various misc things - core kernel changes to prctl, exit, exec, init, etc. - kernel/watchdog.c updates - get_maintainer - MAINTAINERS - the backlight driver queue - core bitops code cleanups - the led driver queue - some core prio_tree work - checkpatch udpates - largeish crc32 update - a new poll() feature for the v4l guys - the rtc driver queue - fatfs - ptrace - signals - kmod/usermodehelper updates - coredump - procfs updates * emailed from Andrew Morton <akpm@linux-foundation.org>: (141 commits) seq_file: add seq_set_overflow(), seq_overflow() proc-ns: use d_set_d_op() API to set dentry ops in proc_ns_instantiate(). procfs: speed up /proc/pid/stat, statm procfs: add num_to_str() to speed up /proc/stat proc: speed up /proc/stat handling fs/proc/kcore.c: make get_sparsemem_vmemmap_info() static coredump: add VM_NODUMP, MADV_NODUMP, MADV_CLEAR_NODUMP coredump: remove VM_ALWAYSDUMP flag kmod: make __request_module() killable kmod: introduce call_modprobe() helper usermodehelper: ____call_usermodehelper() doesn't need do_exit() usermodehelper: kill umh_wait, renumber UMH_* constants usermodehelper: implement UMH_KILLABLE usermodehelper: introduce umh_complete(sub_info) usermodehelper: use UMH_WAIT_PROC consistently signal: zap_pid_ns_processes: s/SEND_SIG_NOINFO/SEND_SIG_FORCED/ signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig() signal: cosmetic, s/from_ancestor_ns/force/ in prepare_signal() paths signal: give SEND_SIG_FORCED more power to beat SIGNAL_UNKILLABLE Hexagon: use set_current_blocked() and block_sigmask() ...
| * | coredump: remove VM_ALWAYSDUMP flagJason Baron2012-03-231-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The motivation for this patchset was that I was looking at a way for a qemu-kvm process, to exclude the guest memory from its core dump, which can be quite large. There are already a number of filter flags in /proc/<pid>/coredump_filter, however, these allow one to specify 'types' of kernel memory, not specific address ranges (which is needed in this case). Since there are no more vma flags available, the first patch eliminates the need for the 'VM_ALWAYSDUMP' flag. The flag is used internally by the kernel to mark vdso and vsyscall pages. However, it is simple enough to check if a vma covers a vdso or vsyscall page without the need for this flag. The second patch then replaces the 'VM_ALWAYSDUMP' flag with a new 'VM_NODUMP' flag, which can be set by userspace using new madvise flags: 'MADV_DONTDUMP', and unset via 'MADV_DODUMP'. The core dump filters continue to work the same as before unless 'MADV_DONTDUMP' is set on the region. The qemu code which implements this features is at: http://people.redhat.com/~jbaron/qemu-dump/qemu-dump.patch In my testing the qemu core dump shrunk from 383MB -> 13MB with this patch. I also believe that the 'MADV_DONTDUMP' flag might be useful for security sensitive apps, which might want to select which areas are dumped. This patch: The VM_ALWAYSDUMP flag is currently used by the coredump code to indicate that a vma is part of a vsyscall or vdso section. However, we can determine if a vma is in one these sections by checking it against the gate_vma and checking for a non-NULL return value from arch_vma_name(). Thus, freeing a valuable vma bit. Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Roland McGrath <roland@hack.frob.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'linux-next' of ↵Linus Torvalds2012-03-2315-119/+37
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
| * | powerpc/PCI: allow reallocation on PA SemiBjorn Helgaas2012-03-201-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We believe there's no reason to prevent reallocation on PA Semi, so revert to the default of "allow reallocation if necessary." Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: linuxppc-dev@lists.ozlabs.org Tested-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | powerpc/PCI: convert devtree bus addresses to resourceBjorn Helgaas2012-03-201-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normal PCI enumeration via PCI config space uses __pci_read_base(), where the PCI core applies any bus-to-resource offset. But powerpc doesn't use that path when enumerating via the device tree. In 6c5705fec63d, I converted powerpc to use the PCI core bus-to-resource conversion, but I missed these powerpc-specific paths. Some powerpc platforms fail to boot ("Cannot allocate resource region," "device not available," etc.) between that commit and this one. This adds the corresponding bus-to-resource conversion in the paths that read BAR values from the OF device tree. CC: Anton Blanchard <anton@samba.org> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | powerpc/PCI: compute I/O space bus-to-resource offset consistentlyBjorn Helgaas2012-03-204-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure we compute CPU addresses (resource start/end) the same way both when we set up the I/O aperture (hose->io_resource) and when we use pcibios_bus_to_resource() to convert BAR values into resources. This fixes a build failure ("cast from pointer to integer of different size" in configs where resource_size_t is 64 bits but pointers are 32 bits) I introduced in 6c5705fec63d. Acked-By: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_deviceYinghai Lu2012-02-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old pci_remove_bus_device actually did stop and remove. Make the name reflect that to reduce confusion. This patch is done by sed scripts and changes back some incorrect __pci_remove_bus_device changes. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: collapse pcibios_resource_to_busBjorn Helgaas2012-02-231-2/+0
| | | | | | | | | | | | | | | | | | | | | Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | powerpc/PCI: get rid of device resource fixupsBjorn Helgaas2012-02-232-81/+6
| | | | | | | | | | | | | | | | | | | | | | | | Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | powerpc/PCI: replace pci_probe_only with pci_flagsBjorn Helgaas2012-02-2310-22/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We already use pci_flags, so this just sets pci_flags directly and removes the intermediate step of figuring out pci_probe_only, then using it to set pci_flags. The PCI core provides a pci_flags definition (currently __weak), so drop the powerpc definitions in favor of that. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | powerpc/PCI: make pci_probe_only default to 0Bjorn Helgaas2012-02-235-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_probe_only is set on ppc64 to prevent resource re-allocation by the core. It's meant to be used in very specific circumstances such as when operating under a hypervisor that may prevent such re-allocation. Instead of default to 1, we make it default to 0 and explicitly set it in the few cases where we need it. This fixes FSL PCI which wants it clear among others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | Merge branch 'next' of ↵Linus Torvalds2012-03-21282-13846/+9612
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc merge from Benjamin Herrenschmidt: "Here's the powerpc batch for this merge window. It is going to be a bit more nasty than usual as in touching things outside of arch/powerpc mostly due to the big iSeriesectomy :-) We finally got rid of the bugger (legacy iSeries support) which was a PITA to maintain and that nobody really used anymore. Here are some of the highlights: - Legacy iSeries is gone. Thanks Stephen ! There's still some bits and pieces remaining if you do a grep -ir series arch/powerpc but they are harmless and will be removed in the next few weeks hopefully. - The 'fadump' functionality (Firmware Assisted Dump) replaces the previous (equivalent) "pHyp assisted dump"... it's a rewrite of a mechanism to get the hypervisor to do crash dumps on pSeries, the new implementation hopefully being much more reliable. Thanks Mahesh Salgaonkar. - The "EEH" code (pSeries PCI error handling & recovery) got a big spring cleaning, motivated by the need to be able to implement a new backend for it on top of some new different type of firwmare. The work isn't complete yet, but a good chunk of the cleanups is there. Note that this adds a field to struct device_node which is not very nice and which Grant objects to. I will have a patch soon that moves that to a powerpc private data structure (hopefully before rc1) and we'll improve things further later on (hopefully getting rid of the need for that pointer completely). Thanks Gavin Shan. - I dug into our exception & interrupt handling code to improve the way we do lazy interrupt handling (and make it work properly with "edge" triggered interrupt sources), and while at it found & fixed a wagon of issues in those areas, including adding support for page fault retry & fatal signals on page faults. - Your usual random batch of small fixes & updates, including a bunch of new embedded boards, both Freescale and APM based ones, etc..." I fixed up some conflicts with the generalized irq-domain changes from Grant Likely, hopefully correctly. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits) powerpc/ps3: Do not adjust the wrapper load address powerpc: Remove the rest of the legacy iSeries include files powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces init: Remove CONFIG_PPC_ISERIES powerpc: Remove FW_FEATURE ISERIES from arch code tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable powerpc/spufs: Fix double unlocks powerpc/5200: convert mpc5200 to use of_platform_populate() powerpc/mpc5200: add options to mpc5200_defconfig powerpc/mpc52xx: add a4m072 board support powerpc/mpc5200: update mpc5200_defconfig to fit for charon board Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board MAINTAINERS: Update PowerPC 4xx tree powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board powerpc: document the FSL MPIC message register binding powerpc: add support for MPIC message register API powerpc/fsl: Added aliased MSIIR register address to MSI node in dts powerpc/85xx: mpc8548cds - add 36-bit dts ...
| * | | powerpc/ps3: Do not adjust the wrapper load addressStephen Rothwell2012-03-211-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c55aef0e5bc6 "powerpc/boot: Change the load address for the wrapper to fit the kernel" adjusted the laod address if the uncompressed kernel was too large. Ps3 does not compress the kernel and uses a different linker script, so do not adjust the load address in that case. fixes this build error: powerpc64-linux-ld: section .text loaded at [0000000000e00000,0000000000e0721b] overlaps section .kernel:dtb loaded at [0000000000e00000,0000000000e0066f] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | powerpc: Remove the rest of the legacy iSeries include filesStephen Rothwell2012-03-219-707/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | since they are not referenced any more. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | powerpc: Remove the remaining CONFIG_PPC_ISERIES piecesStephen Rothwell2012-03-215-37/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | powerpc: Remove FW_FEATURE ISERIES from arch codeStephen Rothwell2012-03-2118-367/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is no longer selectable, so just remove all the dependent code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | powerpc/spufs: Fix double unlocksBenjamin Herrenschmidt2012-03-212-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | spufs return path has a bug where it could end up trying to unlock an inode mutex twice. Fix it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt2012-03-2187-897/+4927
| |\ \ \
| | * | | powerpc: add support for MPIC message register APIJia Hongtao2012-03-164-0/+424
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some MPIC implementations contain one or more blocks of message registers that are used to send messages between cores via IPIs. A simple API has been added to access (get/put, read, write, etc ...) these message registers. The available message registers are initially discovered via nodes in the device tree. A separate commit contains a binding for the message register nodes. Signed-off-by: Meador Inge <meador_inge@mentor.com> Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/fsl: Added aliased MSIIR register address to MSI node in dtsDiana CRACIUN2012-03-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MSIIR register for each MSI bank is aliased to a different address. The MSI node reg property was updated to contain this address: e.g. reg = <0x41600 0x200 0x44140 4>; The first region contains the address and length of the MSI register set and the second region contains the address of the aliased MSIIR register at 0x44140. Signed-off-by: Diana CRACIUN <Diana.Craciun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: mpc8548cds - add 36-bit dtsZhao Chenhui2012-03-161-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create mpc8548cds_36b.dts. Support 36-bit mode. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: Refactor mpc8548cds device treeZhao Chenhui2012-03-164-358/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Create mpc8548cds.dtsi * Move lbc, soc and pci0 nodes to mpc8548cds_32b.dtsi * Change cuImage.mpc8548cds to cuImage.mpc8548cds_32b * Rename mpc8548cds.dts to mpc8548cds_32b.dts Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: mpc8548cds - Add FPGA node to dtschenhui zhao2012-03-162-17/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove FPGA(CADMUS) macros in code. Move it to dts. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: mpc8548cds - fix alias in mpc8548si-pre.dtsiZhao Chenhui2012-03-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct ethernet1 and add ethernet2 and ethernet3. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: mpc8548cds - Add RapidIO node to dtschenhui zhao2012-03-163-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable RapidIO and add rapidio and rmu nodes to dts. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: mpc8548cds - Add NOR flash node to dtschenhui zhao2012-03-161-1/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: mpc85xxcds - Fix PCI I/O space resource of PCI bridgechenhui zhao2012-03-161-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a PCI bridge(Tsi310) between the MPC8548 and a VIA southbridge chip. The bootloader sets the PCI bridge to open a window from 0x0000 to 0x1fff on the PCI I/O space. But the kernel can't set the I/O resource. In the routine pci_read_bridge_io(), if the base which is read from PCI_IO_BASE is equal to zero, the routine don't set the I/O resource of the child bus. To allow the legacy I/O space on the VIA southbridge to be accessed, use the fixup to fix the PCI I/O space of the PCI bridge. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: Add Quicc Engine support for p1025rdbZhicheng Fan2012-03-161-1/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhicheng Fan <b32736@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: Abstract common define of signal multiplex control for qeZhicheng Fan2012-03-162-21/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mpc85xx_rdb and mpc85xx_mds have commom define of signal multiplex for qe, so they need to go in common header, the patch abstract them to fsl_guts.h Signed-off-by: Zhicheng Fan <b32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: allow CONFIG_PHYS_64BIT to be selectableTimur Tabi2012-03-163-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS, so that large physical address support is a selectable option for non-CoreNet reference boards. The option is enabled in mpc85xx_[smp_]defconfig so that the default is unchanged. However, now it can be deselected. The P1022DS had this option defined because the default device tree for this board uses 36-bit addresses. This had the side-effect of forcing this option on for all boards that use mpc85xx_[smp_]defconfig. Some users may want to disable this feature to create an optimized configuration for boards with <= 2GB of RAM. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | powerpc/85xx: l2sram - Add compatible entry for mpc8548 L2 controllerchenhui zhao2012-03-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
OpenPOWER on IntegriCloud