summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* Remove msic_dcr_read() in axon_msi.cMichael Ellerman2007-10-151-7/+2
| | | | | | | | msic_dcr_read() doesn't really do anything useful, just replace it with direct calls to dcr_read(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Use dcr_host_t.base in dcr_unmap()Michael Ellerman2007-10-151-2/+2
| | | | | | | | | With the base stored in dcr_host_t, there's no need for callers to pass the dcr_n into dcr_unmap(). In fact this removes the possibility of them passing the incorrect value, which would then be iounmap()'ed. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add dcr_host_t.base in dcr_read()/dcr_write()Michael Ellerman2007-10-152-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we can save them the trouble and do it in dcr_read()/dcr_write(). As some background to why we just went through all this jiggery-pokery, benh sayeth: Initially the goal of the dcr_read/dcr_write routines was to operate like mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx hardware, indirect DCR access is a pain (goes through a table of instructions) and it's useful to have the compiler resolve an absolute DCR inline. We decided that wasn't worth the API bastardisation since most places where absolute DCR values are used are low level 4xx-only code which may as well continue using mfdcr/mtdcr, while the new API is designed for device "instances" that can exist on 4xx and Axon type platforms and may be located at variable DCR offsets. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* PS3 system bus add_uevent_var() falloutGeert Uytterhoeven2007-10-151-1/+0
| | | | | | | Kill unused variables Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Lite5200 shouldn't mess with ROOT_DEVGrant Likely2007-10-141-12/+0
| | | | | | | | | | | | There is no good reason for board platform code to mess with the ROOT_DEV. Remove it from all in-tree platforms except powermac This is a follow on to commit 745e1027751acbc1f14f8bbef378b491242b9c83. The original patch had this change to lite5200.c, but it got dropped in the psycho madness that is the 2.6.24 merge window. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* missing includes in arch/powerpc/platforms/52xx/lite5200.cAl Viro2007-10-131-0/+2
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2007-10-123-46/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
| * Driver core: change add_uevent_var to use a structKay Sievers2007-10-123-46/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds2007-10-124-6/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Don't take semaphore in cpufreq_quick_get() [CPUFREQ] Support different families in fid/did to frequency conversion [CPUFREQ] cpufreq_stats: misc cpuinit section annotations [CPUFREQ] implement !CONFIG_CPU_FREQ stub for cpufreq_unregister_notifier() [CPUFREQ] mark hotplug notifier callback as __cpuinit [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix) [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core [CPUFREQ] Longhaul - Add support for PM133 northbridge [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
| * [CPUFREQ] move policy's governor initialisation out of low-level drivers ↵Thomas Renninger2007-10-044-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into cpufreq core Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Jones <davej@redhat.com>
* | missed bio_endio() in axonramAl Viro2007-10-111-2/+2
| | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'master' of ↵Linus Torvalds2007-10-11384-7936/+24185
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
| * | [POWERPC] Add memchr() to the bootwrapperDavid Gibson2007-10-122-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | This adds a memchr() implementation to the bootwrapper, which will be needed when libfdt is merged in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Implement logging of unhandled signalsOlof Johansson2007-10-124-1/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement show_unhandled_signals sysctl + support to print when a process is killed due to unhandled signals just as i386 and x86_64 does. Default to having it off, unlike x86 that defaults on. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add legacy serial support for OPB with flattened device treeValentine Barshak2007-10-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently find_legacy_serial_ports() can find no serial ports on the OPB with flattened device tree. Thus no legacy boot console can be initialized. Just the early udbg console works, which is initialized with udbg_init_44x_as1 on the UART's physical address specified in kernel config. This happens because we look for ns16750 serial devices only and expect opb node to have a device type property. This patch makes it look for ns16550-compatible devices and use of_device_is_compatible() for opb in case device type is not specified. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Use 1TB segmentsPaul Mackerras2007-10-1218-209/+400
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pciValentine Barshak2007-10-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | Add 64-bit physical address support to setup_indirect_pci(). Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | Merge branch 'for-2.6.24' of ↵Paul Mackerras2007-10-1218-287/+255
| |\ \ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24
| | * | [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capableKumar Gala2007-10-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All ppc32 systems except PReP and 8xx are capable of handling 3G of user address space. Old legacy had set this to 2GB and no one has bothered to fix it. 8xx could be bumped up to 3GB if its SW TLB miss handlers were fixed up to properly determine kernel/user addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB ↵Kumar Gala2007-10-114-22/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | handlers Move to using PAGE_OFFSET instead of TASK_SIZE or KERNELBASE value on 6xx/40x/44x/fsl-booke to determine if the faulting address is a kernel or user space address. This mimics how the macro is_kernel_addr() works. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfigKumar Gala2007-10-111-5/+18
| | | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] 85xx: Killed <asm/mpc85xx.h>Kumar Gala2007-10-117-142/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | asm-powerpc/mpc85xx.h was really a hold over from arch/ppc. Now that more decoupling has occurred we can remove <asm/mpc85xx.h> and some of its legacy. As part of this we moved the definition of CPM_MAP_ADDR into cpm2.h for 85xx platforms. This is a stop gap until drivers stop using CPM_MAP_ADDR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDSScott Wood2007-10-112-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't use any CPM devices on these boards, but the muram node on these chips is different from the 8560, so it's helpful to people working with custom boards based on these chips. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.Scott Wood2007-10-113-116/+134
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] mpc8272ads: Remove muram from the CPM reg property.Scott Wood2007-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is described by the muram node now. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | Merge branch 'for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-mpc52xx ↵Paul Mackerras2007-10-124-98/+65
| |\ \ \ | | | | | | | | | | | | | | | into for-2.6.24
| | * | | [POWERPC] MPC5200: Don't make firmware fixups into common codeGrant Likely2007-10-102-33/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Lite5200 u-boot image doesn't entirely configure the processor correctly and so Linux needs to fixup the cpu setup in setup_arch. Fixing the CPU setup is good, but making it into common code is not a good idea. New board ports should be encouraged not to take the lead of the lite5200 and instead get their firmware to setup the CPU the right way. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tnt.com>
| | * | | [POWERPC] MPC52xx: Trim includes on mpc5200 platform support codeGrant Likely2007-10-104-50/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop unnecessary includes for MPC5200 based boards Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tnt.com>
| | * | | [POWERPC] MPC52xx: Drop show_cpuinfo platform hooks from Lite5200Grant Likely2007-10-101-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This hook doesn't really add any new information. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tnt.com>
| * | | | [POWERPC] 4xx: Kilauea defconfig fileStefan Roese2007-10-111-0/+768
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | | | [POWERPC] 4xx: Kilauea DTSStefan Roese2007-10-111-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | | | [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40xStefan Roese2007-10-113-2/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the new 405EX and the AMCC eval board Kilauea to arch/powerpc. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | | | [POWERPC] 4xx: Add AMCC 405EX support to cputable.cStefan Roese2007-10-111-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | | | Merge branch 'virtex-for-2.6.24' of ↵Josh Boyer2007-10-112-3/+3
| |\ \ \ \ | | |_|/ / | |/| | | | | | | | git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.24-4xx
| | * | | [POWERPC] Uartlite: bootwrapper bug fix, getc loops foreverGrant Likely2007-10-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes inverted logic in uartlite_getc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | * | | [POWERPC] Don't build arch/powerpc/sysdev/dcr.c for ARCH=ppc kernelsGrant Likely2007-10-101-1/+1
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | dcr.c is an arch/powerpc only thing. Compiling ppc405 arch/ppc kernels throws warnings without this change. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | [POWERPC] Make clockevents work on PPC601 processorsPaul Mackerras2007-10-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In testing the new clocksource and clockevent code on a PPC601 processor, I discovered that the clockevent multiplier value for the decrementer clockevent was overflowing. Because the RTCL register in the 601 effectively counts at 1GHz (it doesn't actually, but it increases by 128 every 128ns), and the shift value was 32, that meant the multiplier value had to be 2^32, which won't fit in an unsigned long on 32-bit. The same problem would arise on any platform where the timebase frequency was 1GHz or more (not that we actually have any such machines today). This fixes it by reducing the shift value to 16. Doing the calculations with a resolution of 2^-16 nanoseconds (15 femtoseconds) should be quite adequate. :) Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Prevent decrementer clockevents from firing earlyPaul Mackerras2007-10-111-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On old powermacs, we sometimes set the decrementer to 1 in order to trigger a decrementer interrupt, which we use to handle an interrupt that was pending at the time when it was re-enabled. This was causing the decrementer clock event device to call the event function for the next event early, which was causing problems when high-res timers were not enabled. This fixes the problem by recording the timebase value at which the next event should occur, and checking the current timebase against the recorded value in timer_interrupt. If it isn't time for the next event, it just reprograms the decrementer and returns. This also subtracts 1 from the value stored into the decrementer, which is appropriate because the decrementer interrupts on the transition from 0 to -1, not when the decrementer reaches 0. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Fix performance monitor on machines with logical PVRPaul Mackerras2007-10-111-21/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some IBM machines supply a "logical" PVR (processor version register) value in the device tree in the cpu nodes rather than the real PVR. This is used for instance to indicate that the processors in a POWER6 partition have been configured by the hypervisor to run in POWER5+ mode rather than POWER6 mode. To cope with this, we call identify_cpu a second time with the logical PVR value (the first call is with the real PVR value in the very early setup code). However, POWER5+ machines can also supply a logical PVR value, and use the same value (the value that indicates a v2.04 architecture compliant processor). This causes problems for code that uses the performance monitor (such as oprofile), because the PMU registers are different in POWER6 (even in POWER5+ mode) from the real POWER5+. This change works around this problem by taking out the PMU information from the cputable entries for the logical PVR values, and changing identify_cpu so that the second call to it won't overwrite the PMU information that was established by the first call (the one with the real PVR), but does update the other fields. Specifically, if the cputable entry for the logical PVR value has num_pmcs == 0, none of the PMU-related fields get used. So that we can create a mixed cputable entry, we now make cur_cpu_spec point to a single static struct cpu_spec, and copy stuff from cpu_specs[i] into it. This has the side-effect that we can now make cpu_specs[] be initdata. Ultimately it would be good to move the PMU-related fields out to a separate structure, pointed to by the cputable entries, and change identify_cpu so that it saves the PMU info pointer, copies the whole structure, and restores the PMU info pointer, rather than identify_cpu having to list all the fields that are *not* PMU-related. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | [POWERPC] Don't enable cpu hotplug on pSeries machines with MPICOlof Johansson2007-10-111-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't allow cpu hotplug on systems lacking XICS interrupt controller (i.e. with an MPIC interrupt controller), since the current pSeries platform code is hardcoded for XICS. This works around the bug reported by Paul Mackerras where the disable_nonboot_cpus() call recently added to the shutdown path will cause an oops on older pSeries machines. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Move of_platform_driver initialisations: arch/powerpcStephen Rothwell2007-10-113-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We no longer initialise the name and owner fields of the of_platform_driver, but use the fields of the embedded device_driver's name field instead. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] iSeries: Move viodasd probingStephen Rothwell2007-10-112-97/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way we only have entries in the device tree for disks that actually exist. A slight complication is that disks may be attached to LPARs at runtime. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] iSeries: Move detection of virtual tapesStephen Rothwell2007-10-112-23/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we will only have entries in the device tree for the actual existing devices (including their OS/400 properties). This way viotape.c gets all the information about the devices from the device tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] iSeries: Move detection of virtual cdromsStephen Rothwell2007-10-114-8/+318
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we will only have entries in the device tree for the actual existing devices (including their OS/400 properties). This way viocd.c gets all the information about the devices from the device tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove more iSeries-specific stuff from vio.cStephen Rothwell2007-10-112-54/+48
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove iSeries_vio_devStephen Rothwell2007-10-114-24/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was only being used to carry around dma_iommu_ops and vio_iommu_table which we can use directly instead. This also means that vio_bus_device doesn't need to refer to them either. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Clean up vio.hStephen Rothwell2007-10-111-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove vio_dma_ops declaration (since it no longer exists) and some unused fields from struct vio_driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Platforms shouldn't mess with ROOT_DEVGrant Likely2007-10-115-34/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no good reason for board platform code to mess with the ROOT_DEV. Remove it from all in-tree platforms except powermac. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Remove empty ppc_md.setup_arch hooksGrant Likely2007-10-115-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | | [POWERPC] Only call ppc_md.setup_arch() if it is providedGrant Likely2007-10-112-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows platforms which don't have anything to do at setup_arch time (like a bunch of the 4xx platforms) to eliminate an empty setup_arch hook. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud