summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBCSolomon Peachy2009-08-312-1/+12
| | | | | | | | | | | | | | | This patch adds support for the ESTeem 195E Hotfoot SBC. There are several variants of the SBC deployed, single/dual ethernet+serial, and also 4MB/8MB flash variations. In the interest of having a single kernel image boot on all boards, the cuboot shim detects the differences and mangles the DTS tree appropriately. With the exception of the CF interface that was never populated on production boards, this code/DTS supports all boardpop options. Signed-off-by: Solomon Peachy <solomon@linux-wlan.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.fkan@amcc.com2009-08-312-0/+13
| | | | | | | | | | This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Acked-by: Tirumala Marri <tmarri@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc: Properly start decrementer on BookE secondary CPUsBenjamin Herrenschmidt2009-08-281-12/+0
| | | | | | | | | | This moves the code to start the decrementer on 40x and BookE into a separate function which is now called from time_init() and secondary_time_init(), before the respective clock sources are registered. We also remove the 85xx specific code for doing it from the platform code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: use dma_map_ops structFUJITA Tomonori2009-08-282-3/+3
| | | | | | | | | This converts uses dma_map_ops struct (in include/linux/dma-mapping.h) instead of POWERPC homegrown dma_mapping_ops. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove swiotlb_pci_dma_opsFUJITA Tomonori2009-08-284-4/+4
| | | | | | | | | Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove addr_needs_map in struct dma_mapping_opsFUJITA Tomonori2009-08-284-0/+4
| | | | | | | | | | | | | | | | This patch adds max_direct_dma_addr to struct dev_archdata to remove addr_needs_map in struct dma_mapping_ops. It also converts dma_capable() to use max_direct_dma_addr. max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(), called via ppc_md.pci_dma_dev_setup hook. For further information: http://marc.info/?t=124719060200001&r=1&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge commit 'kumar/next' into nextBenjamin Herrenschmidt2009-08-276-3/+215
|\
| * powerpc/85xx: Add QE USB support for MPC8569E-MDS boardsAnton Vorontsov2009-08-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add gpio-controller node for BCSR17, it is used to control USB speed and VBUS; - Add timer node for QE GTM, needed for USB host; - Add usb node itself; - Add some probing code for BCSR GPIOs. NOTE: QE USB doesn't work on prototype boards, but should work on pilot boards if specs and schematics are correct, though we don't have the pilot boards to actually test it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boardsAnton Vorontsov2009-08-251-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | - Add usb node; - Configure pins and clocks; - Enable USB function in BCSR. The support was successfully tested using serial and ethernet gadget drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/82xx: Fix BCSR bits for MPC8272ADS boardsAnton Vorontsov2009-08-251-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but according to User's Guide the bits are wrong for MPC8272ADS boards (I guess definitions from pq2ads should only be used for PQ2FADS boards). So, let's introduce our own definitions for MPC8272ADS, and don't include pq2ads.h. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: sbc8560 - Fix warm reboot with board specific reset functionLiang Li2009-08-241-1/+38
| | | | | | | | | | | | | | | | | | | | | | | | The existing fsl_rstcr_restart function is not applicable to the mpc8560. The Global Utilities Block on this earlier CPU doesn't have the control/reset register at 0xe00b0. This implements a board specific reset function that uses the RCR(Reset Control Register) of the sbc8560's EPLD to do a reset. Signed-off-by: Liang Li <Liang.Li@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Add support for P2020RDB boardPoonam Aggrwal2009-08-243-1/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the P2020RDB reference board from Freescale. Overview of P2020RDB platform - DDR DDR2 1G - NOR Flash 16MByte - NAND Flash 32MByte - 3 Ethernet interfaces 1) etSEC1 - RGMII - connected to a 5 port Vitesse Switch(VSC7385) - Switch is memory mapped through eLBC interface(CS#2) - IRQ1 2) etSEC2 - SGMII - connected to VSC8221 - IRQ2 3) etSEC3 - RGMII - connected to VSC8641 - IRQ3 - 2 1X PCIe interfaces - SD/MMC ,USB - SPI EEPROM - Serial I2C EEPROM Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc: Remove SMP warning from PowerMac cpufreqBastian Blank2009-08-271-8/+0
|/ | | | | | | | | | | | | | | | | | | | | | On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote: > On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote: > > This patch just disables this driver on SMP kernels, as it is obviously > > not supported. > Why not remove the #error instead ? :-) I don't think it's still > meaningful, especially since we use the timebase for delays nowadays > which doesn't depend on the CPU frequency... Your call. Take this one: The build of a PowerMac 32bit kernel currently fails with error: #warning "WARNING, CPUFREQ not recommended on SMP kernels" Thie patch removes the not longer applicable SMP warning from the PowerMac cpufreq code. Signed-off-by: Bastian Blank <waldi@debian.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/cell: Move CBE_IOPTE_* to <asm/cell-regs.h>Geert Uytterhoeven2009-08-202-2/+2
| | | | | | | | | As <asm/iommu.h> doesn't contain any other hardware specific definitions but only interfaces. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Missing tests for NULL after ioremap()roel kluin2009-08-201-1/+8
| | | | | | | Missing tests after ioremap() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: ARRAY_SIZE changes in pasemi and powermac codeStoyan Gaydarov2009-08-202-3/+3
| | | | | | | | These changes were a direct result of using a semantic patch More information can be found at http://www.emn.fr/x-info/coccinelle/ Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/sputrace: Use the generic event tracerChristoph Hellwig2009-08-208-285/+45
| | | | | | | | | | | | | | | | | | | | | I wrote sputrace before generic tracing infrastrucure was available. Now that we have the generic event tracer we can convert it over and remove a lot of code: 8 files changed, 45 insertions(+), 285 deletions(-) To use it make sure CONFIG_EVENT_TRACING is enabled and then enable the spufs trace channel by echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable and then read the trace records using e.g. cat /sys/kernel/debug/tracing/trace Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/86xx: Correct reading of information presented in cpuinfoMartyn Welch2009-08-201-7/+30
| | | | | | | | | | | | | | /proc/cpuinfo should be showing the boards revision and the revision of the FPGA fitted. The functions currently used to access this information as incorrect. Additionally the VME geographical address of the PPC9A and it's status as system contoller are available in the board registers. Show these in cpuinfo. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boardsAnton Vorontsov2009-08-202-0/+27
| | | | | | | | | | | | | | | | Actually, the support is already there, but it requires newer U-Boots (to fill-in clock-frequency, and setup pin multiplexing). Though, it appears that on RDB boards USBB pins aren't multiplexed between USB and eSDHC (unlike MDS boards, where USB and eSDHC share pctl and pwrfault pins). So, for RDB boards we can safely setup pinmux and manually fill-in clock-frequency, thus making eSDHC work even with older u-boots. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/83xx: Add support for MPC8377E-WLAN boardsAnton Vorontsov2009-08-202-4/+5
| | | | | | | | | | | | | | | MPC8377E-WLAN are basically RDB boards except: - RAM extended to 512 MB; - NAND flash removed, NOR flash extended to 64 MB; - Vitesse VSC7385 5-port switch removed, RTL8211B PHY added; - Power management MCU removed; - PCI slot removed, another mini-PCI slot added (IRQ routing changed); - USB3300 PHY's ID pin grounded, thus USB port is host-only. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/82xx: mgcoge - updates for 2.6.32Heiko Schocher2009-08-201-9/+60
| | | | | | | | | | - add I2C support - add FCC1 and FCC2 support - fix bogus gpio numbering in plattform code Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remaining 64-bit Book3E supportBenjamin Herrenschmidt2009-08-201-5/+33
| | | | | | | | This contains all the bits that didn't fit in previous patches :-) This includes the actual exception handlers assembly, the changes to the kernel entry, other misc bits and wiring it all up in Kconfig. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Move definitions of secondary CPU spinloop to header fileBenjamin Herrenschmidt2009-08-204-6/+0
| | | | | | | Those definitions are currently declared extern in the .c file where they are used, move them to a header file instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pmac: Fix PowerSurge SMP IPI allocationBenjamin Herrenschmidt2009-08-201-1/+1
| | | | | | | The code for setting up the IPIs for SMP PowerSurge marchines bitrot, it needs to properly map the HW interrupt number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/cell: Replace strncpy by strlcpyroel kluin2009-08-201-2/+1
| | | | | | | Replace strncpy() and explicit null-termination by strlcpy() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove use of a second scratch SPRG in STAB codeBenjamin Herrenschmidt2009-08-201-13/+24
| | | | | | | | | | | | | | | The STAB code used on Power3 and RS/64 uses a second scratch SPRG to save a GPR in order to decide whether to go to do_stab_bolted_* or to handle a normal data access exception. This prevents our scheme of freeing SPRG3 which is user visible for user uses since we cannot use SPRG0 which, on RS/64, seems to be read-only for supervisor mode (like POWER4). This reworks the STAB exception entry to use the PACA as temporary storage instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Use names rather than numbers for SPRGs (v2)Benjamin Herrenschmidt2009-08-202-16/+16
| | | | | | | | | | | | | | | | | | | | | | The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Rename exception.h to exception-64s.hBenjamin Herrenschmidt2009-08-201-1/+1
| | | | | | | | | | | The file include/asm/exception.h contains definitions that are specific to exception handling on 64-bit server type processors. This renames the file to exception-64s.h to reflect that fact and avoid confusion. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/amigaone: Convert amigaone_init() to a machine_device_initcall()Gerhard Pircher2009-08-201-2/+4
| | | | | | | This allows to remove the ppc_md.init() hook in the setup code. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boardsAnton Vorontsov2009-07-291-0/+13
| | | | | | | | | | | | | | | Linux isn't able to detect link changes on ethernet ports that were used by U-Boot. This is because U-Boot wrongly clears interrupt polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR, 0x1b) of Marvell PHYs. There is no easy way for PHY drivers to know IRQ line polarity (we could extract it from the device tree and pass it to phydevs, but that'll be quite a lot of work), so for now just reset the PHYs to their default states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Don't use alloc_bootmem() in init_IRQ() pathAnton Vorontsov2009-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes various badnesses like this for all interrupt controllers: ------------[ cut here ]------------ Badness at c04db9dc [verbose debug info unavailable] NIP: c04db9dc LR: c04db9ac CTR: 00000000 REGS: c053de30 TRAP: 0700 Not tainted (2.6.31-rc1-00432-ge69b2b5-dirty) MSR: 00021000 <ME,CE> CR: 22020084 XER: 00000000 TASK = c0500480[0] 'swapper' THREAD: c053c000 GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000 GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000 GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4 GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050 NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74 LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74 Call Trace: [c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable) [c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108 [c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50 [c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0 [c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c [c053dfb0] [c04cf374] init_IRQ+0x28/0x3c p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix mpic alloc warning") missed some alloc_bootmem() instances, this is now fixed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/cell: Use pr_devel() in axon_msi.cMichael Ellerman2009-07-081-11/+11
| | | | | | | | | | | | | | | | | | pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7083 1616 0 8699 21fb arch/powerpc/../axon_msi.o size after: text data bss dec hex filename 5772 1208 0 6980 1b44 arch/powerpc/../axon_msi.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Use pr_devel() in xics.cMichael Ellerman2009-07-081-4/+4
| | | | | | | | | | | | | | | | | | pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7720 5488 296 13504 34c0 platforms/pseries/xics.o size after: text data bss dec hex filename 7535 5456 296 13287 33e7 platforms/pseries/xics.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Remove unnecessary semicolonsJoe Perches2009-07-083-3/+2
| | | | | | Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routinesMichael Ellerman2009-07-081-9/+9
| | | | | | | | | | | | | | | | | | | | | | pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. In particular, pSeries_lpar_hpte_insert() goes from 185 instructions to 77 instructions as a result of this patch. Luckily that code isn't called very often ... With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7284 1552 296 9132 23ac platforms/pseries/lpar.o size after: text data bss dec hex filename 5806 1096 296 7198 1c1e platforms/pseries/lpar.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/44x: Fix build error with -Werror for Warp platformJosh Boyer2009-07-051-0/+3
| | | | | | | | With -Werror enabled during the build, the warp.c file fails to build due to the temp_isr function not containing a return statement. This fixes the build error and documents that the function never returns. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keepSean MacLennan2009-07-061-12/+4
| | | | | | | | | The GPIO LEDS driver now has a default state of "keep". Update the Warp DTS and platform file to take advantage of this new state. This removes the hardcoding of the two LEDs on the Warp. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt2009-06-264-9/+8
|\
| * powerpc/85xx: remove duplicated #includeHuang Weiyi2009-06-231-1/+0
| | | | | | | | | | | | | | Remove duplicated #include in arch/powerpc/platforms/85xx/xes_mpc85xx.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Fix issue found by lockdep trace in smp_85xx_kick_cpuKumar Gala2009-06-231-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lockdep trace found the following: ------------[ cut here ]------------ Badness at c007baf0 [verbose debug info unavailable] NIP: c007baf0 LR: c007bad8 CTR: 00000000 REGS: ef855e00 TRAP: 0700 Tainted: G W (2.6.30-06736-g12a31df-dirty) MSR: 00021000 <ME,CE> CR: 24044022 XER: 20000000 TASK = ef858000[1] 'swapper' THREAD: ef854000 CPU: 0 GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff GPR08: 000000d0 c0760000 c0710000 00000007 2fffffff 1004a388 7ffd9400 00000000 GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c059cd78 c075c498 c057da7c ffffffff GPR24: ffbc8000 f1000000 00000001 c00bf8b0 c07595d4 000000d0 00021000 000000d0 NIP [c007baf0] lockdep_trace_alloc+0xc0/0xf0 LR [c007bad8] lockdep_trace_alloc+0xa8/0xf0 Call Trace: [ef855eb0] [c007ba60] lockdep_trace_alloc+0x30/0xf0 (unreliable) [ef855ec0] [c00cb3ac] kmem_cache_alloc+0x2c/0xf0 [ef855ee0] [c00bf8b0] __get_vm_area_node+0x80/0x1c0 [ef855f10] [c0017580] __ioremap_caller+0x1d0/0x1e0 [ef855f40] [c057da7c] smp_85xx_kick_cpu+0x64/0x124 [ef855f60] [c0599180] __cpu_up+0xd0/0x1a4 [ef855f80] [c05997c4] cpu_up+0x14c/0x1e0 [ef855fc0] [c05732a0] kernel_init+0x100/0x1c4 [ef855ff0] [c0011524] kernel_thread+0x4c/0x68 Instruction dump: 8009c174 2f800000 409e0048 73c08000 40820040 4818980d 2f830000 419effa0 3d20c076 8009c388 2f800000 409eff90 <0fe00000> 4bffff88 60000000 60000000 We were calling ioremap after we local_irq_restore(flags). A simple reorder fixes the problem. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Fix FSL RapidIO probing on MDS boardsRandy Vinson2009-06-231-0/+1
| | | | | | | | | | | | | | | | | | | | FSL RapidIO won't probe without a proper compatible entry. This patch fixes the issue by adding fsl,rapidio-delta compatible to mpc85xx_ids. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Stop using ppc_md.init on socratesKumar Gala2009-06-231-3/+3
| | | | | | | | | | | | | | | | Match what other 85xx platforms do for of_platform_bus_probe and use machine_device_initcall. This is one small step in killing of ppc_md.init. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/pasemi: Use raw spinlock in SMP TB syncBenjamin Herrenschmidt2009-06-261-5/+10
| | | | | | | | | | | | | | | | spin_lock() can hang if called while the timebase is frozen, so use a raw lock instead, also disable interrupts while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc: Use one common impl. of RTAS timebase sync and use raw spinlockBenjamin Herrenschmidt2009-06-263-87/+6
| | | | | | | | | | | | | | | | | | | | | | Several platforms use their own copy of what is essentially the same code, using RTAS to synchronize the timebases when bringing up new CPUs. This moves it all into a single common implementation and additionally turns the spinlock into a raw spinlock since the former can rely on the timebase not being frozen when spinlock debugging is enabled, and finally masks interrupts while the timebase is disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMPBenjamin Herrenschmidt2009-06-262-97/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old PowerSurge SMP (ie, dual or quad 604 machines) code has numerous issues in modern world. One is cpu_possible_map is set too late (the device-tree is bogus) so we fail to allocate the interrupt stacks and crash. Another problem is the fact the timebase is frozen by the bringup of the second CPU so the delays in the generic code will hang, we need to move some of the calling procedure to inside the powermac code. This makes it boot again for me Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | powerpc/warp: Platform fix for i2c changeSean MacLennan2009-06-261-30/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A change to the i2c subsystem breaks the warp platform code. The patch is cleaner anyway, the old way was a bit crufty. For those with keen eyes, the gratuitous change in the string from PIKA to Warp is just so the logs look a bit nicer. The following two lines tend to be printed one after another. Warp POST OK Warp DTM thread running. Yeah, this will be the third patch to warp.c submitted in this release.... Cheers, Sean The i2c_client struct changed, breaking the code that looked for the ad7414 chip. Use the new of_find_i2c_device_by_node function added in 2.6.29. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | Merge branch 'linux-next' of ↵Linus Torvalds2009-06-221-14/+24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
| * | PCI AER: support Multiple Error Received and no error source idZhang, Yanmin2009-06-161-14/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0. The patchset implements the support in kernel by searching the device tree under the root port. Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds2009-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'perfcounters-fixes-for-linus' of ↵Linus Torvalds2009-06-201-1/+11
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits) perfcounter: Handle some IO return values perf_counter: Push perf_sample_data through the swcounter code perf_counter tools: Define and use our own u64, s64 etc. definitions perf_counter: Close race in perf_lock_task_context() perf_counter, x86: Improve interactions with fast-gup perf_counter: Simplify and fix task migration counting perf_counter tools: Add a data file header perf_counter: Update userspace callchain sampling uses perf_counter: Make callchain samples extensible perf report: Filter to parent set by default perf_counter tools: Handle lost events perf_counter: Add event overlow handling fs: Provide empty .set_page_dirty() aop for anon inodes perf_counter: tools: Makefile tweaks for 64-bit powerpc perf_counter: powerpc: Add processor back-end for MPC7450 family perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels perf_counter: powerpc: Change how processor-specific back-ends get selected perf_counter: powerpc: Use unsigned long for register and constraint values perf_counter: powerpc: Enable use of software counters on 32-bit powerpc perf_counter tools: Add and use isprint() ...
OpenPOWER on IntegriCloud