summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/maple/pci.c
Commit message (Collapse)AuthorAgeFilesLines
* powerpc: Convert to using %pOF instead of full_nameRob Herring2017-08-231-5/+5
| | | | | | | | | | | | | | | | | | Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Anatolij Gustschin <agust@denx.de> Cc: Scott Wood <oss@buserror.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Move isa bridge definitions to separate includeBenjamin Herrenschmidt2017-01-311-0/+1
| | | | | | | | We'll be adding non-PCI isa bridge support so let's not have all the definition in pci-bridge.h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Remove all usages of NO_IRQMichael Ellerman2016-09-201-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pci: Delay populating pdnGavin Shan2016-06-211-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | The pdn (struct pci_dn) instances are allocated from memblock or bootmem when creating PCI controller (hoses) in setup_arch(). PCI hotplug, which will be supported by proceeding patches, releases PCI device nodes and their corresponding pdn on unplugging event. The memory chunks for pdn instances allocated from memblock or bootmem are hard to reused after being released. This delays creating pdn by pci_devs_phb_init() from setup_arch() to core_initcall() so that they are allocated from slab. The memory consumed by pdn can be released to system without problem during PCI unplugging time. It indicates that pci_dn is unavailable in setup_arch() and the the fixup on pdn (like AGP's) can't be carried out that time. We have to do that in pcibios_root_bridge_prepare() on maple/pasemi/powermac platforms where/when the pdn is available. pcibios_root_bridge_prepare is called from subsys_initcall() which is executed after core_initcall() so the code flow does not change. At the mean while, the EEH device is created when pdn is populated, meaning pdn and EEH device have same life cycle. In turn, we needn't call eeh_dev_init() to create EEH device explicitly. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/maple: Move controller ops from ppc_md to controller_opsDaniel Axtens2015-04-111-0/+4
| | | | | | | | This moves the Maple platform to use the pci_controller_ops structure rather than ppc_md for PCI controller operations. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Remove superfluous bootmem includesAnton Blanchard2014-11-101-1/+0
| | | | | | | | Lots of places included bootmem.h even when not using bootmem. Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* POWERPC: drivers: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-2/+2
| | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/PCI: replace pci_probe_only with pci_flagsBjorn Helgaas2012-02-231-1/+1
| | | | | | | | | | | | | We already use pci_flags, so this just sets pci_flags directly and removes the intermediate step of figuring out pci_probe_only, then using it to set pci_flags. The PCI core provides a pci_flags definition (currently __weak), so drop the powerpc definitions in favor of that. CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* powerpc/maple: Enable access to HT Host-Bridge on MapleDmitry Eremin-Solenikov2011-11-281-0/+55
| | | | | | | | CPC925/CPC945 use special window to access host bridge functionality of u3-ht. Provide a way to access this device. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Convert to new irq_* function namesThomas Gleixner2011-03-291-1/+1
| | | | | | Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* powerpc/maple: Add a quirk to disable MSI for IPR on BiminiMichael Ellerman2009-05-221-0/+14
| | | | | | | | | Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* [POWERPC] maple: Kill fixup_maple_ideNathan Lynch2008-03-261-47/+0
| | | | | | | | This function has been a no-op for about 18 months; it's there in the history should anyone need to resurrect it. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] pci_controller->arch_data really is a struct device_node *Stephen Rothwell2007-12-111-1/+1
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple pci_ops: Use named structure member initializersNathan Lynch2007-08-171-6/+6
| | | | | Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove gratuitous reads from maple PCI config space methodsNathan Lynch2007-08-171-9/+0
| | | | | | | | | | | | | | | | | | | | The maple PCI configuration space write methods read the written location immediately after the write is performed, presumably in order to flush the write. However, configuration space writes are not allowed to be posted, making these reads gratuitous. Furthermore, this behavior potentially causes us to violate the PCI PM spec when changing between e.g. D0 and D3 states, because a delay of up to 10ms may be required before the OS accesses configuration space after the write which initiates the transition. It definitely causes a system hang for me with a Broadcom 5721 PCIE network adapter, which is fixed by this change. Therefore this removes the gratuitous reads from u3_agp_write_config, u3_ht_write_config, and u4_pcie_write_config. Signed-off-by: Nathan Lynch <ntl@pobox.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix Maple platform ISA busBenjamin Herrenschmidt2007-07-261-0/+3
| | | | | | | | | | The Maple platform has ISA IOs but didn't call the new functions to actually map those, thus crashing when trying to access the nvram. This fixes Maple and JS2x using SLOF. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] rename add_bridge to avoid namespace clashesArnd Bergmann2007-06-291-3/+3
| | | | | | | | | Many platforms currently define their own add_bridge function, some of them globally. This breaks some multiplatform configurations. Prefixing each of these functions with the platform name avoids this problem. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* [POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt2007-06-141-35/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell2007-05-071-6/+6
| | | | | | | | | | | for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell2007-04-131-3/+3
| | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make struct property's value a void *Stephen Rothwell2007-04-131-1/+1
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Maple: don't override bus-range supplied by firmwareNathan Lynch2007-02-071-8/+0
| | | | | | | | This workaround was copy-pasted from the powermac code. It's not necessary for maple. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: improve CPC9x5 host bridge detectionNathan Lynch2007-01-241-6/+9
| | | | | | | | | | Identify CPC9x5 PCI Express, AGP, and HT host bridges using device_type and compatible properties, which is a more flexible method than using the name property (which can differ between firmwares and models). Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: Match "pcie" name for CPC945Nathan Lynch2006-12-081-1/+1
| | | | | | | | | Some firmwares have "pcie" for the "name" property of the CPC945 PCI Express host bridge. Check for "pcie" in addition to "pci" so we don't miss it. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make pci_read_irq_line the defaultBenjamin Herrenschmidt2006-12-041-28/+19
| | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the way IRQs are fixed up on PCI for arch powerpc. It makes pci_read_irq_line() called by default in the PCI code for devices that are probed, and add an optional per-device fixup in ppc_md for platforms that really need to correct what they obtain from pci_read_irq_line(). It also removes ppc_md.irq_bus_setup which was only used by pSeries and should not be needed anymore. I've also removed the pSeries s7a workaround as it can't work with the current interrupt code anyway. I'm trying to get one of these machines working so I can test a proper fix for that problem. I also haven't updated the old-style fixup code from 85xx_cds.c because it's actually buggy :) It assigns pci_dev->irq hard coded numbers which is no good with the new IRQ mapping code. It should at least use irq_create_mapping(NULL, hard_coded_number); and possibly also set_irq_type() to set them as level low. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix Maple secondary IDE interruptBenjamin Herrenschmidt2006-10-101-2/+15
| | | | | | | | | | | | The IDE driver will pick up the PCI IRQ for both channels on Maple despite the fact that it's in legacy mode. This works around it by "hiding" the PCI IRQ of the AMD8111 IDE controller when it's configured in legacy mode on the Maple platform, thus causing the driver to call pci_get_legacy_ide_irq() which will return the correct interrupts for both channels. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make U4 PCIe work on mapleBenjamin Herrenschmidt2006-10-101-7/+169
| | | | | | | | | The Maple support code was missing code for U4/CPC945 PCIe. This adds it, enabling it to work on tigerwood boards, and possibly also js21 using SLOF. Also disable an obsolete firmware workaround. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple/pci iomem annotationsAl Viro2006-09-261-30/+30
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Demacrofy arch/powerpc/platforms/maple/pci.cNathan Lynch2006-09-221-19/+25
| | | | | | | | | | | | | | | | | | | | | Noticed that the U3_*CFA macros have some typos: #define U3_HT_CFA0(devfn, off) \ ((((unsigned long)devfn) << 8) | offset) (refers to offset rather than off) #define U3_AGP_CFA0(devfn, off) \ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ (refers to dev_fn rather than devfn) Things happen to work, but there doesn't seem to be any reason these shouldn't be functions. Overall behavior should be unchanged. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Maple U3 HT - reject inappropriate config space accessNathan Lynch2006-09-221-0/+6
| | | | | | | | | | | | | | When there is a PCI-X mode 2 capable device behind the HT<->PCI-X bridge, the pci core decides that the device has the extended 4K config space, even though the bus is not operating in mode 2. This is because the u3_ht pci ops silently accept offsets greater than 255 but use only the 8 least significant bits, which means reading at offset 0x100 gets the data at offset 0x0, and causes confusion for lspci. Reject accesses to configuration space offsets greater than 255. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] maple: Constify & voidify get_property()Jeremy Kerr2006-07-311-9/+11
| | | | | | | | | | | | | Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. maple platform changes. Built for maple_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt2006-07-031-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] 64bit resource: fix up printks for resources in arch and core codeGreg Kroah-Hartman2006-06-271-2/+3
| | | | | | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> and Andrew Morton. (tweaked by Andy Isaacson <adi@hexapodia.org>) Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] powerpc: remove io_page_maskAnton Blanchard2006-04-221-3/+0
| | | | | | | | | | | Cleanup patch which removes the io_page_mask. It fixes the reset on some e1000 devices which is needed for clean kexec reboots. The legacy devices which broke with this patch (parallel port and PC speaker) have now been fixed in Linus' tree. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Don't re-assign PCI resources on MapleSegher Boessenkool2006-02-241-2/+2
| | | | | | | | | Maple firmware does not need PCI resource allocation, and in fact, it can cause problems in some strange cases. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Fix Maple buildBenjamin Herrenschmidt2006-01-151-1/+0
| | | | | | | | The changes to the device node structure broke Maple build. This fixes it. Unfortunately I coudn't test as my Maple board appears to be dead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: pci_64 fixes & cleanupsBenjamin Herrenschmidt2005-11-161-15/+1
| | | | | | | | | | | | | | | | I discovered that in some cases (PowerMac for example) we wouldn't properly map the PCI IO space on recent kernels. In addition, the code for initializing PCI host bridges was scattered all over the place with some duplication between platforms. This patch fixes the problem and does a small cleanup by creating a pcibios_alloc_controller() in pci_64.c that is similar to the one in pci_32.c (just takes an additional device node argument) that takes care of all the grunt allocation and initialisation work. It should work for both boot time and dynamically allocated PHBs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] ppc64: fix PCI IO mappingBenjamin Herrenschmidt2005-11-101-3/+0
| | | | | | | | | | | | | | | | | phbs_remap_io(), which maps the PCI IO space into the kernel virtual space, is called too early on powermac, and thus doesn't work. This fixes it by removing the call from all platforms and putting it back into the ppc64 common code where it belongs, after the actual probing of the bus. That means that before that call, only the ISA IO space (if any) is mapped, any PIO access (from quirks for example) will fail. This happens not to be a problem for now, but we'll have to rework that code if it becomes one in the future. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Merge maple support code to arch/powerpc/platforms/maplePaul Mackerras2005-10-291-0/+522
Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud