summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel
Commit message (Collapse)AuthorAgeFilesLines
* [PATCH] msi: sanely support hardware level msi disablingEric W. Biederman2007-03-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases when we are not using msi we need a way to ensure that the hardware does not have an msi capability enabled. Currently the code has been calling disable_msi_mode to try and achieve that. However disable_msi_mode has several other side effects and is only available when msi support is compiled in so it isn't really appropriate. Instead this patch implements pci_msi_off which disables all msi and msix capabilities unconditionally with no additional side effects. pci_disable_device was redundantly clearing the bus master enable flag and clearing the msi enable bit. A device that is not allowed to perform bus mastering operations cannot generate intx or msi interrupt messages as those are essentially a special case of dma, and require bus mastering. So the call in pci_disable_device to disable msi capabilities was redundant. quirk_pcie_pxh also called disable_msi_mode and is updated to use pci_msi_off. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* backlight: Separate backlight properties from backlight ops pointersRichard Purdie2007-02-201-1/+1
| | | | | | | | | Per device data such as brightness belongs to the indivdual device and should therefore be separate from the the backlight operation function pointers. This patch splits the two types of data and allows simplifcation of some code. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* backlight: Fix external uses of backlight internal semaphoreRichard Purdie2007-02-201-3/+1
| | | | | | | | | | | | | | | | | | backlight_device->sem has a very specific use as documented in the header file. The external users of this are using it for a different reason, to serialise access to the update_status() method. backlight users were supposed to implement their own internal serialisation of update_status() if needed but everyone is doing things differently and incorrectly. Therefore add a global mutex to take care of serialisation for everyone, once and for all. Locking for get_brightness remains optional since most users don't need it. Also update the lcd class in a similar way. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2007-02-191-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (25 commits) Documentation/kernel-docs.txt update. arch/cris: typo in KERN_INFO Storage class should be before const qualifier kernel/printk.c: comment fix update I/O sched Kconfig help texts - CFQ is now default, not AS. Remove duplicate listing of Cris arch from README kbuild: more doc. cleanups doc: make doc. for maxcpus= more visible drivers/net/eexpress.c: remove duplicate comment add a help text for BLK_DEV_GENERIC correct a dead URL in the IP_MULTICAST help text fix the BAYCOM_SER_HDX help text fix SCSI_SCAN_ASYNC help text trivial documentation patch for platform.txt Fix typos concerning hierarchy Fix comment typo "spin_lock_irqrestore". Fix misspellings of "agressive". drivers/scsi/a100u2w.c: trivial typo patch Correct trivial typo in log2.h. Remove useless FIND_FIRST_BIT() macro from cardbus.c. ...
| * Storage class should be before const qualifierTobias Klauser2007-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [POWERPC] add of_get_mac_address and update fsl_soc.c to use itTimur Tabi2007-02-171-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add function of_get_mac_address(), which obtains the best MAC address to use from the device tree by checking various properties in order. The order is: 'mac-address', then 'local-mac-address', then 'address'. It skips properties that contain invalid MAC addresses, which were probably not initialized by U-Boot. Update gfar_of_init() and fs_enet_of_init() in fsl_soc.c to call of_get_mac_address(). Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [POWERPC] Export of_find_propertyDave Jones2007-02-161-0/+1
|/ | | | | | | | | | | Without this, building drivers/serial/of_serial.c as a module fails. WARNING: ".of_find_property" [drivers/serial/of_serial.ko] undefined! Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman2007-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] sysctl: C99 convert ctl_tables in arch/powerpc/kernel/idle.cEric W. Biederman2007-02-141-3/+8
| | | | | | | | | | This was partially done already and there was no ABI breakage what a relief. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] Use udbg_early_init() on ppc32David Gibson2007-02-143-6/+13
| | | | | | | | | | | | | | | udbg_early_init() is a function used on 64 bit systems, which initializes whichever early udbg backend is configured. This function is not called on 32-bit, however if btext early debug is enabled it does have an explicit, inline, #ifdef-ed assignment performing analagous initialization. This patch makes things more uniform by folding the btext initialization as an option into udbg_early_init() and calling that from the 32-bit setup path. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Open Firmware serial port driverArnd Bergmann2007-02-141-0/+15
| | | | | | | | | | | | | | | | | This can be used for serial ports that are connected to an OF platform bus but are not autodetected by the lecacy serial support. It will automatically take over devices that come from the legacy serial detection, which usually is only one device. In some cases, rtas may be set up to use the serial port in the firmware, which allows easier debugging before probing the serial ports. In this case, the "used-by-rtas" property must be set by the firmware. This patch also adds code to the legacy serial driver to check for this. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Move MPIC smp routines into mpic.cMichael Ellerman2007-02-141-23/+0
| | | | | | | | Move a couple of MPIC smp routines into mpic.c, they're inside an SMP block in mpic.c - so they're still only built for SMP. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.SBecky Bruce2007-02-131-2/+0
| | | | | | | | Eliminate needless invocation of the SYNC macro (which always evaluates to nothing on BookE) from head_fsl_booke.S (for both arch/ppc & arch/powerpc). Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' into 85xxKumar Gala2007-02-1214-172/+144
|\
| * [POWERPC] Add device tree fixups for the EFIKASylvain Munaut2007-02-131-0/+81
| | | | | | | | | | | | | | | | | | | | | | We make the efika device tree compliant with the defined bindings (at least compliant enough). This is mostly done by mangling the device_type and compatible properties, but also adding some missing bits. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] correct a prototypeStephen Rothwell2007-02-131-1/+1
| | | | | | | | | | | | | | This rids us of a warning. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix vDSO page count calculationBenjamin Herrenschmidt2007-02-131-11/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent vDSO consolidation patches broke powerpc due to a mistake in the definition of MAXPAGES constants. This fixes it by moving to a dynamically allocated array of pages instead as I don't like much hard coded size limits. Also move the vdso initialisation to an initcall since it doesn't really need to be done -that- early. Applogies for not catching the breakage earlier, Roland _did_ CC me on his patches a while ago, I got busy with other things and forgot to test them. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Remove ibm4{xx,4x}.h from arch/powerpcDavid Gibson2007-02-131-2/+0
| | | | | | | | | | | | | | | | | | ARCH=powerpc should not use the ghastly un-multiplatformable tangle of includes that starts with asm-ppc/ibm4xx.h. This patch removes a compile-breaking include of it from head_44x.S. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] mark struct file_operations const 2Arjan van de Ven2007-02-125-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@osdl.org: sparc64 fix] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * [PATCH] Dynamic kernel command-line: powerpcAlon Bar-Lev2007-02-123-3/+3
| | | | | | | | | | | | | | | | | | | | Rename saved_command_line into boot_command_line. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * [PATCH] Common compat_sys_sysinfoKyle McMartin2007-02-111-67/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed that almost all architectures implemented exactly the same sys32_sysinfo... except parisc, where a bug was to be found in handling of the uptime. So let's remove a whole whack of code for fun and profit. Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it would be the best tested. This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but instead extracting out the common code from sys_sysinfo. Cc: Christoph Hellwig <hch@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * [PATCH] proc: remove useless (and buggy) ->nlink settingsAlexey Dobriyan2007-02-112-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug: pnx8550 code creates directory but resets ->nlink to 1. create_proc_entry() et al will correctly set ->nlink for you. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Corey Minyard <minyard@acm.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * [PATCH] disable init/initramfs.c: architecturesJean-Paul Saman2007-02-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs when CONFIG_BLK_DEV_INITRAMFS is not selected. This saves another 4 kbytes on most platfoms (some reserve PAGE_SIZE for initramfs). Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * [PATCH] powerpc vDSO: use install_special_mappingRoland McGrath2007-02-091-77/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses install_special_mapping for the powerpc vDSO setup, consolidating duplicated code. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | [POWERPC] 85xx: Don't write reserved values to MAS1[TSIZE]Becky Bruce2007-02-121-1/+4
|/ | | | | | | | | | | | | Some of the current tlbwe instructions early on in head_fsl_booke.S take advantage of unarchitected behavior that allows the writing of reserved values to the TSIZE field. This patch corrects that, as well as an error where an uninitialized (by linux) value was written into a MAS register and used for a tlbwe. Correct this for both arch/ppc and arch/powerpc. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2007-02-0824-190/+405
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (116 commits) [POWERPC] Add export of vgacon_remap_base [POWERPC] Remove bogus comment about page_is_ram [POWERPC] windfarm: don't die on suspend thread signal [POWERPC] Fix comment in kernel/irq.c [POWERPC] ppc: Fix booke watchdog initialization [POWERPC] PPC: Use ARRAY_SIZE macro when appropriate [POWERPC] Use ARRAY_SIZE macro when appropriate [POWERPC] Fix ppc64's writing to struct file_operations [POWERPC] ppc: use syslog macro for the printk log level [POWERPC] ppc: cs4218_tdm remove extra brace [POWERPC] Add mpc52xx/lite5200 PCI support [POWERPC] Only use H_BULK_REMOVE if the firmware supports it [POWERPC] Fixup error handling when emulating a floating point instruction [POWERPC] Enable interrupts if we are doing fp math emulation [POWERPC] Added kprobes support to ppc32 [POWERPC] Make pSeries use the H_BULK_REMOVE hypervisor call [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspace [POWERPC] Fix performance monitor exception [POWERPC] Compile fixes for arch/powerpc dcr code [POWERPC] Maple: use mmio nvram ...
| * [POWERPC] Add export of vgacon_remap_baseMathieu Desnoyers2007-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The following macro : include/asm-powerpc/vga.h:#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base) is used by drivers/video/console/vgacon.c which can be compiled as a module (drivers/video/vga16fb.ko). Therefore, vgacon_remap_base should be exported. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix comment in kernel/irq.cJohannes Berg2007-02-081-3/+3
| | | | | | | | | | | | | | | | | | | | kernel/irq.c contains a comment that speaks of -1 and -2 as interrupt numbers, but this is actually dependent on configuration options now. Replace by NO_IRQ and NO_IRQ_ENABLED. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix ppc64's writing to struct file_operationsStephen Rothwell2007-02-081-4/+7
| | | | | | | | | | | | | | | | | | | | In preparation for marking file_operations as const. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fixup error handling when emulating a floating point instructionKumar Gala2007-02-071-22/+60
| | | | | | | | | | | | | | | | | | | | | | | | When we do full FP emulation its possible that we need to post a SIGFPE based on the results of the emulation. The previous code ignored this case completely. Additionally, the Soft_emulate_8xx case had two issues. One, we should never generate a SIGFPE since the code only does data movement. Second, we were interpreting the return codes incorrectly, it returns 0 on success, 1 on illop and -EFAULT on a data access error. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * [POWERPC] Enable interrupts if we are doing fp math emulationKumar Gala2007-02-071-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Anytime we are emulating an instruction we are going to be doing some form of get_user() to get the instruction image to decode. Since get_user() might sleep we need to ensure we have interrupts enabled or we might see something like: Debug: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:697 in_atomic():0, irqs_disabled():1 Call Trace: [D6023EB0] [C0007F84] show_stack+0x58/0x174 (unreliable) [D6023EE0] [C0022C34] __might_sleep+0xbc/0xd0 [D6023EF0] [C000D158] program_check_exception+0x1d8/0x4fc [D6023F40] [C000E744] ret_from_except_full+0x0/0x4c --- Exception: 700 at 0x102a7100 LR = 0xdb9ef04 However, we want to ensure that interrupts are disabled when handling a trap exception that might be used for a kernel breakpoint. This is why ProgramCheck is marked as EXC_XFER_STD instead of EXC_XFER_EE. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * [POWERPC] Added kprobes support to ppc32Kumar Gala2007-02-061-2/+6
| | | | | | | | | | | | | | | | Added kprobes to ppc32 platforms that have use single_step_exception. This excludes 4xx and anything Book-E since their debug mechanisms for single stepping are completely different. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Merge branch 'linux-2.6'Paul Mackerras2007-02-072-1/+8
| |\
| * | [POWERPC] Clear RI bit in MSR before restoring r13 when returning to userspacePaul Mackerras2007-02-071-26/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some instruction tracing tools use the RI (recoverable interrupt) bit in the MSR to indicate when it's safe to single-step. Currently we clear RI after restoring r13 when returning to userspace. However, if we single-step past the point where r13 is restored, we'll corrupt r13 in the exception entry code and not restore it. This moves the clearing of RI to just before r13 is restored so this doesn't happen. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Fix performance monitor exceptionLivio Soares2007-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To the issue: some point during 2.6.20 development, Paul Mackerras introduced the "lazy IRQ disabling" patch (very cool work, BTW). In that patch, the performance monitor unit exception was marked as "maskable", in the sense that if interrupts were soft-disabled, that exception could be ignored. This broke my PowerPC profiling code. The symptom that I see is that a varying number of interrupts (from 0 to $n$, typically closer to 0) get delivered, when, in reality, it should always be very close to $n$. The issue stems from the way masking is being done. Masking in this fashion seems to work well with the decrementer and external interrupts, because they are raised again until "really" handled. For the PMU, however, this does not apply (at least on my Xserver machine with a 970FX processor). If the PMU exception is not handled, it will _not_ be re-raised (at least on my machine). The documentation states that the PMXE bit in MMCR0 is set to 0 when the PMU exception is raised. However, software must re-set the bit to re-enable PMU exceptions. If the exception is ignored (as currently) not only is that interrupt lost, but because software does not re-set PMXE, the PMU registers are "frozen" forever. [This patch means that performance monitor exceptions are taken and handled even if irqs are off, as long as some other interrupt hasn't come along and caused interrupts to be hard-disabled. In this sense the PMU exception becomes like an NMI. The oprofile code for most powerpc processors does nothing that is unsafe in an NMI context, but the Cell oprofile code does a spin_lock_irqsave. However, that turns out to be OK because Cell doesn't actually use the performance monitor exception; performance monitor interrupts come in as a regular interrupt on Cell, so will be disabled when irqs are off. -- paulus.] Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Compile fixes for arch/powerpc dcr codeDavid Gibson2007-02-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] pasemi: Idle loopsOlof Johansson2007-02-073-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | Powersave support on PA6T. Right now it only uses 'doze' mode, and will default to no savings (spin). Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] pasemi: UART udbg supportOlof Johansson2007-02-073-0/+66
| | | | | | | | | | | | | | | | | | | | | Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Celleb: support udbgIshizaki Kou2007-02-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds udbg support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] PA6T PMC supportOlof Johansson2007-02-072-50/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for PA6T-style PMC registers. PMCs are completely implementation-dependent on PPC, and PA6T numbers them differently from the IBM model. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add PMC type to cputableOlof Johansson2007-02-072-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add cputable entries for which type of PMC implementation the processor has. I've only filled in the current 64-bit processors, the unfilled default value will have same behaviour as before so it can be done over time as needed. Also tidy up the dummy_perf implementation a bit, aggregating it into one function with ifdefs instead of several. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Remove fastcall function attributeKumar Gala2007-01-261-10/+10
| | | | | | | | | | | | | | | | | | fastcall is an x86 specific function attribute and has no business in ppc code Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | [POWERPC] Add IRQ remapping hookIshizaki Kou2007-01-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds irq remapping hook. On interrupt mechanism on Beat, when an irq outlet which has an id which is formerly used is created, remapping the irq is required. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Remove the broken Gemini supportAdrian Bunk2007-01-241-5/+0
| | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Mask 32-bit system call arguments to 32 bits on PPC64 in audit codeDavid Woodhouse2007-01-241-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | The system call entry code will clear the high bits of argument registers before invoking the system call; don't report whatever noise happens to be in the high bits of the register before that happens. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add support for R_PPC_ADDR16_HI relocationsSimon Vallet2007-01-241-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | apply_relocate_add() does not support R_PPC_ADDR16_HI relocations, which prevents some non gcc-built modules to be loaded. Signed-off-by: Simon Vallet <svallet@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] arch/powerpc/kernel/vio.c of_node_put cleanupMariusz Kozlowski2007-01-241-4/+2
| | | | | | | | | | | | | | | | | | | | | Remove redundant argument check for of_node_put(). Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] arch/ppc/kernel/prom.c of_node_(get|put) cleanupMariusz Kozlowski2007-01-241-12/+6
| | | | | | | | | | | | | | | | | | | | | Remove redundant argument checks for of_node_get() and of_node_put(). Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Do not write virq back to PCI config spaceMichal Ostrowski2007-01-242-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Drivers will not rely on the PCI config space value, as they've already been conditioned to rely on the irq field in "struct pci_dev". - The virq value may not be < 256 as it has been remapped. - The PCI config space should reflect the hardware configuration, which is not being changed. We are only creating a virtual irq mapping that exists in the kernel only. One would never expect the PCI hardware to generate the "virq" interrupt. Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Use is_init() instead of pid==1Akinobu Mita2007-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use is_init() rather than hard coded pid comparison. Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud