summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/powernv: Fix opal_xscom_{read,write} prototypeBenjamin Herrenschmidt2014-02-281-2/+2
| | | | | | | | | The OPAL firmware functions opal_xscom_read and opal_xscom_write take a 64-bit argument for the XSCOM (PCB) address in order to support the indirect mode on P8. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: <stable@vger.kernel.org> [v3.13]
* powerpc: Increase stack redzone for 64-bit userspace to 512 bytesPaul Mackerras2014-02-282-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | The new ELFv2 little-endian ABI increases the stack redzone -- the area below the stack pointer that can be used for storing data -- from 288 bytes to 512 bytes. This means that we need to allow more space on the user stack when delivering a signal to a 64-bit process. To make the code a bit clearer, we define new USER_REDZONE_SIZE and KERNEL_REDZONE_SIZE symbols in ptrace.h. For now, we leave the kernel redzone size at 288 bytes, since increasing it to 512 bytes would increase the size of interrupt stack frames correspondingly. Gcc currently only makes use of 288 bytes of redzone even when compiling for the new little-endian ABI, and the kernel cannot currently be compiled with the new ABI anyway. In the future, hopefully gcc will provide an option to control the amount of redzone used, and then we could reduce it even more. This also changes the code in arch_compat_alloc_user_space() to preserve the expanded redzone. It is not clear why this function would ever be used on a 64-bit process, though. Signed-off-by: Paul Mackerras <paulus@samba.org> CC: <stable@vger.kernel.org> [v3.13] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/eeh: Cleanup on eeh_subsystem_enabledGavin Shan2014-02-171-2/+19
| | | | | | | | | The patch cleans up variable eeh_subsystem_enabled so that we needn't refer the variable directly from external. Instead, we will use function eeh_enabled() and eeh_set_enable() to operate the variable. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Link VDSOs at 0x0Anton Blanchard2014-02-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | perf is failing to resolve symbols in the VDSO. A while (1) gettimeofday() loop shows: 93.99% [vdso] [.] 0x00000000000005e0 3.12% test [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18 2.81% test [.] main The reason for this is that we are linking our VDSO shared libraries at 1MB, which is a little weird. Even though this is uncommon, Alan points out that it is valid and we should probably fix perf userspace. Regardless, I can't see a reason why we are doing this. The code is all position independent and we never rely on the VDSO ending up at 1M (and we never place it there on 64bit tasks). Changing our link address to 0x0 fixes perf VDSO symbol resolution: 73.18% [vdso] [.] 0x000000000000060c 12.39% [vdso] [.] __kernel_gettimeofday 3.58% test [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18 2.94% [vdso] [.] __kernel_datapage_offset 2.90% test [.] main We still have some local symbol resolution issues that will be fixed in a subsequent patch. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bitAneesh Kumar K.V2014-02-171-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Archs like ppc64 doesn't do tlb flush in set_pte/pmd functions when using a hash table MMU for various reasons (the flush is handled as part of the PTE modification when necessary). ppc64 thus doesn't implement flush_tlb_range for hash based MMUs. Additionally ppc64 require the tlb flushing to be batched within ptl locks. The reason to do that is to ensure that the hash page table is in sync with linux page table. We track the hpte index in linux pte and if we clear them without flushing hash and drop the ptl lock, we can have another cpu update the pte and can end up with duplicate entry in the hash table, which is fatal. We also want to keep set_pte_at simpler by not requiring them to do hash flush for performance reason. We do that by assuming that set_pte_at() is never *ever* called on a PTE that is already valid. This was the case until the NUMA code went in which broke that assumption. Fix that by introducing a new pair of helpers to set _PAGE_NUMA in a way similar to ptep/pmdp_set_wrprotect(), with a generic implementation using set_pte_at() and a powerpc specific one using the appropriate mechanism needed to keep the hash table in sync. Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/mm: Add new "set" flag argument to pte/pmd update functionAneesh Kumar K.V2014-02-172-12/+16
| | | | | | | | | | | | | | | | | | | | | | | pte_update() is a powerpc-ism used to change the bits of a PTE when the access permission is being restricted (a flush is potentially needed). It uses atomic operations on when needed and handles the hash synchronization on hash based processors. It is currently only used to clear PTE bits and so the current implementation doesn't provide a way to also set PTE bits. The new _PAGE_NUMA bit, when set, is actually restricting access so it must use that function too, so this change adds the ability for pte_update() to also set bits. We will use this later to set the _PAGE_NUMA bit. Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/powernv: Add iommu DMA bypass support for IODA2Benjamin Herrenschmidt2014-02-112-0/+2
| | | | | | | | | | | | | | | This patch adds the support for to create a direct iommu "bypass" window on IODA2 bridges (such as Power8) allowing to bypass iommu page translation completely for 64-bit DMA capable devices, thus significantly improving DMA performances. Additionally, this adds a hook to the struct iommu_table so that the IOMMU API / VFIO can disable the bypass when external ownership is requested, since in that case, the device will be used by an environment such as userspace or a KVM guest which must not be allowed to bypass translations. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Fix kdump hang issue on p8 with relocation on exception enabled.Mahesh Salgaonkar2014-02-111-0/+12
| | | | | | | | | | | | | | | | | | | | | On p8 systems, with relocation on exception feature enabled we are seeing kdump kernel hang at interrupt vector 0xc*4400. The reason is, with this feature enabled, exception are raised with MMU (IR=DR=1) ON with the default offset of 0xc*4000. Since exception is raised in virtual mode it requires the vector region to be executable without which it fails to fetch and execute instruction at 0xc*4xxx. For default kernel since kernel is loaded at real 0, the htab mappings sets the entire kernel text region executable. But for relocatable kernel (e.g. kdump case) we only copy interrupt vectors down to real 0 and never marked that region as executable because in p7 and below we always get exception in real mode. This patch fixes this issue by marking htab mapping range as executable that overlaps with the interrupt vector region for relocatable kernel. Thanks to Ben who helped me to debug this issue and find the root cause. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2014-01-3113-116/+257
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more KVM updates from Paolo Bonzini: "Second batch of KVM updates. Some minor x86 fixes, two s390 guest features that need some handling in the host, and all the PPC changes. The PPC changes include support for little-endian guests and enablement for new POWER8 features" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits) x86, kvm: correctly access the KVM_CPUID_FEATURES leaf at 0x40000101 x86, kvm: cache the base of the KVM cpuid leaves kvm: x86: move KVM_CAP_HYPERV_TIME outside #ifdef KVM: PPC: Book3S PR: Cope with doorbell interrupts KVM: PPC: Book3S HV: Add software abort codes for transactional memory KVM: PPC: Book3S HV: Add new state for transactional memory powerpc/Kconfig: Make TM select VSX and VMX KVM: PPC: Book3S HV: Basic little-endian guest support KVM: PPC: Book3S HV: Add support for DABRX register on POWER7 KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbells KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8 KVM: PPC: Book3S HV: Handle guest using doorbells for IPIs KVM: PPC: Book3S HV: Consolidate code that checks reason for wake from nap KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8 KVM: PPC: Book3S HV: Add handler for HV facility unavailable KVM: PPC: Book3S HV: Flush the correct number of TLB sets on POWER8 KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbers KVM: PPC: Book3S HV: Don't set DABR on POWER8 kvm/ppc: IRQ disabling cleanup ...
| * Merge branch 'kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvm-queuePaolo Bonzini2014-01-2913-116/+257
| |\ | | | | | | | | | | | | | | | Conflicts: arch/powerpc/kvm/book3s_hv_rmhandlers.S arch/powerpc/kvm/booke.c
| | * KVM: PPC: Book3S PR: Cope with doorbell interruptsPaul Mackerras2014-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the PR host is running on a POWER8 machine in POWER8 mode, it will use doorbell interrupts for IPIs. If one of them arrives while we are in the guest, we pop out of the guest with trap number 0xA00, which isn't handled by kvmppc_handle_exit_pr, leading to the following BUG_ON: [ 331.436215] exit_nr=0xa00 | pc=0x1d2c | msr=0x800000000000d032 [ 331.437522] ------------[ cut here ]------------ [ 331.438296] kernel BUG at arch/powerpc/kvm/book3s_pr.c:982! [ 331.439063] Oops: Exception in kernel mode, sig: 5 [#2] [ 331.439819] SMP NR_CPUS=1024 NUMA pSeries [ 331.440552] Modules linked in: tun nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw virtio_net kvm binfmt_misc ibmvscsi scsi_transport_srp scsi_tgt virtio_blk [ 331.447614] CPU: 11 PID: 1296 Comm: qemu-system-ppc Tainted: G D 3.11.7-200.2.fc19.ppc64p7 #1 [ 331.448920] task: c0000003bdc8c000 ti: c0000003bd32c000 task.ti: c0000003bd32c000 [ 331.450088] NIP: d0000000025d6b9c LR: d0000000025d6b98 CTR: c0000000004cfdd0 [ 331.451042] REGS: c0000003bd32f420 TRAP: 0700 Tainted: G D (3.11.7-200.2.fc19.ppc64p7) [ 331.452331] MSR: 800000000282b032 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI> CR: 28004824 XER: 20000000 [ 331.454616] SOFTE: 1 [ 331.455106] CFAR: c000000000848bb8 [ 331.455726] GPR00: d0000000025d6b98 c0000003bd32f6a0 d0000000026017b8 0000000000000032 GPR04: c0000000018627f8 c000000001873208 320d0a3030303030 3030303030643033 GPR08: c000000000c490a8 0000000000000000 0000000000000000 0000000000000002 GPR12: 0000000028004822 c00000000fdc6300 0000000000000000 00000100076ec310 GPR16: 000000002ae343b8 00003ffffd397398 0000000000000000 0000000000000000 GPR20: 00000100076f16f4 00000100076ebe60 0000000000000008 ffffffffffffffff GPR24: 0000000000000000 0000008001041e60 0000000000000000 0000008001040ce8 GPR28: c0000003a2d80000 0000000000000a00 0000000000000001 c0000003a2681810 [ 331.466504] NIP [d0000000025d6b9c] .kvmppc_handle_exit_pr+0x75c/0xa80 [kvm] [ 331.466999] LR [d0000000025d6b98] .kvmppc_handle_exit_pr+0x758/0xa80 [kvm] [ 331.467517] Call Trace: [ 331.467909] [c0000003bd32f6a0] [d0000000025d6b98] .kvmppc_handle_exit_pr+0x758/0xa80 [kvm] (unreliable) [ 331.468553] [c0000003bd32f750] [d0000000025d98f0] kvm_start_lightweight+0xb4/0xc4 [kvm] [ 331.469189] [c0000003bd32f920] [d0000000025d7648] .kvmppc_vcpu_run_pr+0xd8/0x270 [kvm] [ 331.469838] [c0000003bd32f9c0] [d0000000025cf748] .kvmppc_vcpu_run+0xc8/0xf0 [kvm] [ 331.470790] [c0000003bd32fa50] [d0000000025cc19c] .kvm_arch_vcpu_ioctl_run+0x5c/0x1b0 [kvm] [ 331.471401] [c0000003bd32fae0] [d0000000025c4888] .kvm_vcpu_ioctl+0x478/0x730 [kvm] [ 331.472026] [c0000003bd32fc90] [c00000000026192c] .do_vfs_ioctl+0x4dc/0x7a0 [ 331.472561] [c0000003bd32fd80] [c000000000261cc4] .SyS_ioctl+0xd4/0xf0 [ 331.473095] [c0000003bd32fe30] [c000000000009ed8] syscall_exit+0x0/0x98 [ 331.473633] Instruction dump: [ 331.473766] 4bfff9b4 2b9d0800 419efc18 60000000 60420000 3d220000 e8bf11a0 e8df12a8 [ 331.474733] 7fa4eb78 e8698660 48015165 e8410028 <0fe00000> 813f00e4 3ba00000 39290001 [ 331.475386] ---[ end trace 49fc47d994c1f8f2 ]--- [ 331.479817] This fixes the problem by making kvmppc_handle_exit_pr() recognize the interrupt. We also need to jump to the doorbell interrupt handler in book3s_segment.S to handle the interrupt on the way out of the guest. Having done that, there's nothing further to be done in kvmppc_handle_exit_pr(). Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Add software abort codes for transactional memoryMichael Neuling2014-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the software abort code defines for transactional memory (TM). These values are from PAPR. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Add new state for transactional memoryMichael Neuling2014-01-271-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add new state for transactional memory (TM) to kvm_vcpu_arch. Also add asm-offset bits that are going to be required. This also moves the existing TFHAR, TFIAR and TEXASR SPRs into a CONFIG_PPC_TRANSACTIONAL_MEM section. This requires some code changes to ensure we still compile with CONFIG_PPC_TRANSACTIONAL_MEM=N. Much of the added the added #ifdefs are removed in a later patch when the bulk of the TM code is added. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: fix merge conflict] Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Basic little-endian guest supportAnton Blanchard2014-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We create a guest MSR from scratch when delivering exceptions in a few places. Instead of extracting LPCR[ILE] and inserting it into MSR_LE each time, we simply create a new variable intr_msr which contains the entire MSR to use. For a little-endian guest, userspace needs to set the ILE (interrupt little-endian) bit in the LPCR for each vcpu (or at least one vcpu in each virtual core). [paulus@samba.org - removed H_SET_MODE implementation from original version of the patch, and made kvmppc_set_lpcr update vcpu->arch.intr_msr.] Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Add support for DABRX register on POWER7Paul Mackerras2014-01-273-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DABRX (DABR extension) register on POWER7 processors provides finer control over which accesses cause a data breakpoint interrupt. It contains 3 bits which indicate whether to enable accesses in user, kernel and hypervisor modes respectively to cause data breakpoint interrupts, plus one bit that enables both real mode and virtual mode accesses to cause interrupts. Currently, KVM sets DABRX to allow both kernel and user accesses to cause interrupts while in the guest. This adds support for the guest to specify other values for DABRX. PAPR defines a H_SET_XDABR hcall to allow the guest to set both DABR and DABRX with one call. This adds a real-mode implementation of H_SET_XDABR, which shares most of its code with the existing H_SET_DABR implementation. To support this, we add a per-vcpu field to store the DABRX value plus code to get and set it via the ONE_REG interface. For Linux guests to use this new hcall, userspace needs to add "hcall-xdabr" to the set of strings in the /chosen/hypertas-functions property in the device tree. If userspace does this and then migrates the guest to a host where the kernel doesn't include this patch, then userspace will need to implement H_SET_XDABR by writing the specified DABR value to the DABR using the ONE_REG interface. In that case, the old kernel will set DABRX to DABRX_USER | DABRX_KERNEL. That should still work correctly, at least for Linux guests, since Linux guests cope with getting data breakpoint interrupts in modes that weren't requested by just ignoring the interrupt, and Linux guests never set DABRX_BTI. The other thing this does is to make H_SET_DABR and H_SET_XDABR work on POWER8, which has the DAWR and DAWRX instead of DABR/X. Guests that know about POWER8 should use H_SET_MODE rather than H_SET_[X]DABR, but guests running in POWER7 compatibility mode will still use H_SET_[X]DABR. For them, this adds the logic to convert DABR/X values into DAWR/X values on POWER8. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Prepare for host using hypervisor doorbellsPaul Mackerras2014-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | POWER8 has support for hypervisor doorbell interrupts. Though the kernel doesn't use them for IPIs on the powernv platform yet, it probably will in future, so this makes KVM cope gracefully if a hypervisor doorbell interrupt arrives while in a guest. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Handle new LPCR bits on POWER8Paul Mackerras2014-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | POWER8 has a bit in the LPCR to enable or disable the PURR and SPURR registers to count when in the guest. Set this bit. POWER8 has a field in the LPCR called AIL (Alternate Interrupt Location) which is used to enable relocation-on interrupts. Allow userspace to set this field. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Handle guest using doorbells for IPIsPaul Mackerras2014-01-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * SRR1 wake reason field for system reset interrupt on wakeup from nap is now a 4-bit field on P8, compared to 3 bits on P7. * Set PECEDP in LPCR when napping because of H_CEDE so guest doorbells will wake us up. * Waking up from nap because of a guest doorbell interrupt is not a reason to exit the guest. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Implement architecture compatibility modes for POWER8Paul Mackerras2014-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows us to select architecture 2.05 (POWER6) or 2.06 (POWER7) compatibility modes on a POWER8 processor. (Note that transactional memory is disabled for usermode if either or both of the PCR_TM_DIS and PCR_ARCH_206 bits are set.) Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Add handler for HV facility unavailableMichael Ellerman2014-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present this should never happen, since the host kernel sets HFSCR to allow access to all facilities. It's better to be prepared to handle it cleanly if it does ever happen, though. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Context-switch new POWER8 SPRsMichael Neuling2014-01-273-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds fields to the struct kvm_vcpu_arch to store the new guest-accessible SPRs on POWER8, adds code to the get/set_one_reg functions to allow userspace to access this state, and adds code to the guest entry and exit to context-switch these SPRs between host and guest. Note that DPDES (Directed Privileged Doorbell Exception State) is shared between threads on a core; hence we store it in struct kvmppc_vcore and have the master thread save and restore it. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S HV: Align physical and virtual CPU thread numbersPaul Mackerras2014-01-272-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a threaded processor such as POWER7, we group VCPUs into virtual cores and arrange that the VCPUs in a virtual core run on the same physical core. Currently we don't enforce any correspondence between virtual thread numbers within a virtual core and physical thread numbers. Physical threads are allocated starting at 0 on a first-come first-served basis to runnable virtual threads (VCPUs). POWER8 implements a new "msgsndp" instruction which guest kernels can use to interrupt other threads in the same core or sub-core. Since the instruction takes the destination physical thread ID as a parameter, it becomes necessary to align the physical thread IDs with the virtual thread IDs, that is, to make sure virtual thread N within a virtual core always runs on physical thread N. This means that it's possible that thread 0, which is where we call __kvmppc_vcore_entry, may end up running some other vcpu than the one whose task called kvmppc_run_core(), or it may end up running no vcpu at all, if for example thread 0 of the virtual core is currently executing in userspace. However, we do need thread 0 to be responsible for switching the MMU -- a previous version of this patch that had other threads switching the MMU was found to be responsible for occasional memory corruption and machine check interrupts in the guest on POWER7 machines. To accommodate this, we no longer pass the vcpu pointer to __kvmppc_vcore_entry, but instead let the assembly code load it from the PACA. Since the assembly code will need to know the kvm pointer and the thread ID for threads which don't have a vcpu, we move the thread ID into the PACA and we add a kvm pointer to the virtual core structure. In the case where thread 0 has no vcpu to run, it still calls into kvmppc_hv_entry in order to do the MMU switch, and then naps until either its vcpu is ready to run in the guest, or some other thread needs to exit the guest. In the latter case, thread 0 jumps to the code that switches the MMU back to the host. This control flow means that now we switch the MMU before loading any guest vcpu state. Similarly, on guest exit we now save all the guest vcpu state before switching the MMU back to the host. This has required substantial code movement, making the diff rather large. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * kvm/ppc: IRQ disabling cleanupScott Wood2014-01-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the handling of lazy EE by going directly from fully-enabled to hard-disabled. This replaces the lazy_irq_pending() check (including its misplaced kvm_guest_exit() call). As suggested by Tiejun Chen, move the interrupt disabling into kvmppc_prepare_to_enter() rather than have each caller do it. Also move the IRQ enabling on heavyweight exit into kvmppc_prepare_to_enter(). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Book3S: MMIO emulation support for little endian guestsCédric Le Goater2014-01-273-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MMIO emulation reads the last instruction executed by the guest and then emulates. If the guest is running in Little Endian order, or more generally in a different endian order of the host, the instruction needs to be byte-swapped before being emulated. This patch adds a helper routine which tests the endian order of the host and the guest in order to decide whether a byteswap is needed or not. It is then used to byteswap the last instruction of the guest in the endian order of the host before MMIO emulation is performed. Finally, kvmppc_handle_load() of kvmppc_handle_store() are modified to reverse the endianness of the MMIO if required. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> [agraf: add booke handling] Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Unify kvmppc_get_last_inst and scAlexander Graf2014-01-091-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | We had code duplication between the inline functions to get our last instruction on normal interrupts and system call interrupts. Unify both helper functions towards a single implementation. Signed-off-by: Alexander Graf <agraf@suse.de>
| | * kvm: powerpc: use caching attributes as per linux pteBharat Bhushan2014-01-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KVM uses same WIM tlb attributes as the corresponding qemu pte. For this we now search the linux pte for the requested page and get these cache caching/coherency attributes from pte. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * kvm: powerpc: define a linux pte lookup functionBharat Bhushan2014-01-091-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | We need to search linux "pte" to get "pte" attributes for setting TLB in KVM. This patch defines a lookup_linux_ptep() function which returns pte pointer. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Store FP/VSX/VMX state in thread_fp/vr_state structuresPaul Mackerras2014-01-091-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This uses struct thread_fp_state and struct thread_vr_state to store the floating-point, VMX/Altivec and VSX state, rather than flat arrays. This makes transferring the state to/from the thread_struct simpler and allows us to unify the get/set_one_reg implementations for the VSX registers. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * KVM: PPC: Use load_fp/vr_state rather than load_up_fpu/altivecPaul Mackerras2014-01-092-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The load_up_fpu and load_up_altivec functions were never intended to be called from C, and do things like modifying the MSR value in their callers' stack frames, which are assumed to be interrupt frames. In addition, on 32-bit Book S they require the MMU to be off. This makes KVM use the new load_fp_state() and load_vr_state() functions instead of load_up_fpu/altivec. This means we can remove the assembler glue in book3s_rmhandlers.S, and potentially fixes a bug on Book E, where load_up_fpu was called directly from C. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * kvm/powerpc: move kvm_hypercall0() and friends to epapr_hypercall0()Bharat Bhushan2014-01-092-68/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | kvm_hypercall0() and friends have nothing KVM specific so moved to epapr_hypercall0() and friends. Also they are moved from arch/powerpc/include/asm/kvm_para.h to arch/powerpc/include/asm/epapr_hcalls.h Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
| | * kvm/powerpc: rename kvm_hypercall() to epapr_hypercall()Bharat Bhushan2014-01-092-17/+52
| | | | | | | | | | | | | | | | | | | | | | | | kvm_hypercall() have nothing KVM specific, so renamed to epapr_hypercall(). Also this in moved to arch/powerpc/include/asm/epapr_hcalls.h Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* | | powerpc: Wire up sched_setattr and sched_getattr syscallsBenjamin Herrenschmidt2014-01-293-2/+5
| | | | | | | | | | | | Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | powerpc/pseries/cpuidle: smt-snooze-delay cleanup.Deepthi Dharwar2014-01-291-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smt-snooze-delay was designed to disable NAP state or delay the entry to the NAP state prior to adoption of cpuidle framework. This is per-cpu variable. With the coming of CPUIDLE framework, states can be disabled on per-cpu basis using the cpuidle/enable sysfs entry. Also, with the coming of cpuidle driver each state's target residency is per-driver unlike earlier which was per-device. Therefore, the per-cpu sysfs smt-snooze-delay which decides the target residency of the idle state on a particular cpu causes more confusion to the user as we cannot have different smt-snooze-delay (target residency) values for each cpu. In the current code, smt-snooze-delay functionality is completely broken. It makes sense to remove smt-snooze-delay from idle driver with the coming of cpuidle framework. However, sysfs files are retained as ppc64_util currently utilises it. Once we fix ppc64_util, propose to clean up the kernel code. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle.Deepthi Dharwar2014-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the file from arch specific pseries/processor_idle.c to drivers/cpuidle/cpuidle-pseries.c Make the relevant Makefile and Kconfig changes. Also, introduce Kconfig.powerpc in drivers/cpuidle for all powerpc cpuidle drivers. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | powerpc/mm: Fix compile error of pgtable-ppc64.hLi Zhong2014-01-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that forward declaration couldn't work well with typedef, use struct spinlock directly to avoiding following build errors: In file included from include/linux/spinlock.h:81, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:17, from arch/powerpc/kernel/asm-offsets.c:17: include/linux/spinlock_types.h:76: error: redefinition of typedef 'spinlock_t' /root/linux-next/arch/powerpc/include/asm/pgtable-ppc64.h:563: note: previous declaration of 'spinlock_t' was here Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | Merge remote-tracking branch 'agust/next' into nextBenjamin Herrenschmidt2014-01-292-21/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | << Switch mpc512x to the common clock framework and adapt mpc512x drivers to use the new clock driver. Old PPC_CLOCK code is removed entirely since there are no users any more. >>
| * | | powerpc/512x: clk: support MPC5121/5123/5125 SoC variantsGerhard Sittig2014-01-121-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | improve the common clock support code for MPC512x - expand the CCM register set declaration with MPC5125 related registers (which reside in the previously "reserved" area) - tell the MPC5121, MPC5123, and MPC5125 SoC variants apart, and derive the availability of components and their clocks from the detected SoC (MBX, AXE, VIU, SPDIF, PATA, SATA, PCI, second FEC, second SDHC, number of PSC components, type of NAND flash controller, interpretation of the CPMF bitfield, PSC/CAN mux0 stage input clocks, output clocks on SoC pins) - add backwards compatibility (allow operation against a device tree which lacks clock related specs) for MPC5125 FECs, too telling SoC variants apart and adjusting the clock tree's generation occurs at runtime, a common generic binary supports all of the chips the MPC5125 approach to the NFC clock (one register with two counters for the high and low periods of the clock) is not implemented, as there are no users and there is no common implementation which supports this kind of clock -- the new implementation would be unused and could not get verified, so it shall wait until there is demand Signed-off-by: Gerhard Sittig <gsi@denx.de> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | clk: mpc5xxx: switch to COMMON_CLK, retire PPC_CLOCKGerhard Sittig2014-01-121-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the setup before the change was - arch/powerpc/Kconfig had the PPC_CLOCK option, off by default - depending on the PPC_CLOCK option the arch/powerpc/kernel/clock.c file was built, which implements the clk.h API but always returns -ENOSYS unless a platform registers specific callbacks - the MPC52xx platform selected PPC_CLOCK but did not register any callbacks, thus all clk.h API calls keep resulting in -ENOSYS errors (which is OK, all peripheral drivers deal with the situation) - the MPC512x platform selected PPC_CLOCK and registered specific callbacks implemented in arch/powerpc/platforms/512x/clock.c, thus provided real support for the clock API - no other powerpc platform did select PPC_CLOCK the situation after the change is - the MPC512x platform implements the COMMON_CLK interface, and thus the PPC_CLOCK approach in arch/powerpc/platforms/512x/clock.c has become obsolete - the MPC52xx platform still lacks genuine support for the clk.h API while this is not a change against the previous situation (the error code returned from COMMON_CLK stubs differs but every call still results in an error) - with all references gone, the arch/powerpc/kernel/clock.c wrapper and the PPC_CLOCK option have become obsolete, as did the clk_interface.h header file the switch from PPC_CLOCK to COMMON_CLK is done for all platforms within the same commit such that multiplatform kernels (the combination of 512x and 52xx within one executable) keep working Cc: Mike Turquette <mturquette@linaro.org> Cc: Anatolij Gustschin <agust@denx.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | | Merge branch 'next' of ↵Linus Torvalds2014-01-2730-52/+597
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "So here's my next branch for powerpc. A bit late as I was on vacation last week. It's mostly the same stuff that was in next already, I just added two patches today which are the wiring up of lockref for powerpc, which for some reason fell through the cracks last time and is trivial. The highlights are, in addition to a bunch of bug fixes: - Reworked Machine Check handling on kernels running without a hypervisor (or acting as a hypervisor). Provides hooks to handle some errors in real mode such as TLB errors, handle SLB errors, etc... - Support for retrieving memory error information from the service processor on IBM servers running without a hypervisor and routing them to the memory poison infrastructure. - _PAGE_NUMA support on server processors - 32-bit BookE relocatable kernel support - FSL e6500 hardware tablewalk support - A bunch of new/revived board support - FSL e6500 deeper idle states and altivec powerdown support You'll notice a generic mm change here, it has been acked by the relevant authorities and is a pre-req for our _PAGE_NUMA support" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits) powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked() powerpc: Add support for the optimised lockref implementation powerpc/powernv: Call OPAL sync before kexec'ing powerpc/eeh: Escalate error on non-existing PE powerpc/eeh: Handle multiple EEH errors powerpc: Fix transactional FP/VMX/VSX unavailable handlers powerpc: Don't corrupt transactional state when using FP/VMX in kernel powerpc: Reclaim two unused thread_info flag bits powerpc: Fix races with irq_work Move precessing of MCE queued event out from syscall exit path. pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines powerpc: Make add_system_ram_resources() __init powerpc: add SATA_MV to ppc64_defconfig powerpc/powernv: Increase candidate fw image size powerpc: Add debug checks to catch invalid cpu-to-node mappings powerpc: Fix the setup of CPU-to-Node mappings during CPU online powerpc/iommu: Don't detach device without IOMMU group powerpc/eeh: Hotplug improvement powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space powerpc/eeh: Add restore_config operation ...
| * | | | powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()Michael Ellerman2014-01-281-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At a glance these are just the inverse of each other. The one subtlety is that arch_spin_value_unlocked() takes the lock by value, rather than as a pointer, which is important for the lockref code. On the other hand arch_spin_is_locked() doesn't really care, so implement it in terms of arch_spin_value_unlocked(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc: Add support for the optimised lockref implementationMichael Ellerman2014-01-282-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds the architecture support required to enable the optimised implementation of lockrefs. That's as simple as defining arch_spin_value_unlocked() and selecting the Kconfig option. We also define cmpxchg64_relaxed(), because the lockref code does not need the cmpxchg to have barrier semantics. Using Linus' test case[1] on one system I see a 4x improvement for the basic enablement, and a further 1.3x for cmpxchg64_relaxed(), for a total of 5.3x vs the baseline. On another system I see more like 2x improvement. [1]: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc/powernv: Call OPAL sync before kexec'ingVasant Hegde2014-01-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Its possible that OPAL may be writing to host memory during kexec (like dump retrieve scenario). In this situation we might end up corrupting host memory. This patch makes OPAL sync call to make sure OPAL stops writing to host memory before kexec'ing. Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | powerpc/eeh: Handle multiple EEH errorsGavin Shan2014-01-151-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For one PCI error relevant OPAL event, we possibly have multiple EEH errors for that. For example, multiple frozen PEs detected on different PHBs. Unfortunately, we didn't cover the case. The patch enumarates the return value from eeh_ops::next_error() and change eeh_handle_special_event() and eeh_ops::next_error() to handle all existing EEH errors. As Ben pointed out, we needn't list_for_each_entry_safe() since we are not deleting any PHB from the hose_list and the EEH serialized lock should be held while purging EEH events. The patch covers those suggestions as well. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | Merge remote-tracking branch 'scott/next' into nextBenjamin Herrenschmidt2014-01-159-12/+62
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale updates from Scott: << Highlights include 32-bit booke relocatable support, e6500 hardware tablewalk support, various e500 SPE fixes, some new/revived boards, and e6500 deeper idle and altivec powerdown modes. >>
| | * | | | powerpc/85xx: handle the eLBC error interrupt if it exists in dtsShaohui Xie2014-01-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On P1020, P1021, P1022, and P1023, eLBC event interrupts are routed to internal interrupt 3 while ELBC error interrupts are routed to internal interrupt 0. We need to call request_irq for each. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> [scottwood@freescale.com: reworded commit message and fixed author] Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * | | | powerpc/e6500: TLB miss handler with hardware tablewalk supportScott Wood2014-01-093-10/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a few things that make the existing hw tablewalk handlers unsuitable for e6500: - Indirect entries go in TLB1 (though the resulting direct entries go in TLB0). - It has threads, but no "tlbsrx." -- so we need a spinlock and a normal "tlbsx". Because we need this lock, hardware tablewalk is mandatory on e6500 unless we want to add spinlock+tlbsx to the normal bolted TLB miss handler. - TLB1 has no HES (nor next-victim hint) so we need software round robin (TODO: integrate this round robin data with hugetlb/KVM) - The existing tablewalk handlers map half of a page table at a time, because IBM hardware has a fixed 1MiB indirect page size. e6500 has variable size indirect entries, with a minimum of 2MiB. So we can't do the half-page indirect mapping, and even if we could it would be less efficient than mapping the full page. - Like on e5500, the linear mapping is bolted, so we don't need the overhead of supporting nested tlb misses. Note that hardware tablewalk does not work in rev1 of e6500. We do not expect to support e6500 rev1 in mainline Linux. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com>
| | * | | | powerpc: introduce macro LOAD_REG_ADDR_PICKevin Hao2014-01-091-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is used to get the address of a variable when the kernel is not running at the linked or relocated address. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * | | | powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 defineWang Dongsheng2014-01-072-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | E6500 PVR and SPRN_PWRMGTCR0 will be used in subsequent pw20/altivec idle patches. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * | | | powerpc: fix exception clearing in e500 SPE float emulationJoseph Myers2014-01-071-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The e500 SPE floating-point emulation code clears existing exceptions (__FPU_FPSCR &= ~FP_EX_MASK;) before ORing in the exceptions from the emulated operation. However, these exception bits are the "sticky", cumulative exception bits, and should only be cleared by the user program setting SPEFSCR, not implicitly by any floating-point instruction (whether executed purely by the hardware or emulated). The spurious clearing of these bits shows up as missing exceptions in glibc testing. Fixing this, however, is not as simple as just not clearing the bits, because while the bits may be from previous floating-point operations (in which case they should not be cleared), the processor can also set the sticky bits itself before the interrupt for an exception occurs, and this can happen in cases when IEEE 754 semantics are that the sticky bit should not be set. Specifically, the "invalid" sticky bit is set in various cases with non-finite operands, where IEEE 754 semantics do not involve raising such an exception, and the "underflow" sticky bit is set in cases of exact underflow, whereas IEEE 754 semantics are that this flag is set only for inexact underflow. Thus, for correct emulation the kernel needs to know the setting of these two sticky bits before the instruction being emulated. When a floating-point operation raises an exception, the kernel can note the state of the sticky bits immediately afterwards. Some <fenv.h> functions that affect the state of these bits, such as fesetenv and feholdexcept, need to use prctl with PR_GET_FPEXC and PR_SET_FPEXC anyway, and so it is natural to record the state of those bits during that call into the kernel and so avoid any need for a separate call into the kernel to inform it of a change to those bits. Thus, the interface I chose to use (in this patch and the glibc port) is that one of those prctl calls must be made after any userspace change to those sticky bits, other than through a floating-point operation that traps into the kernel anyway. feclearexcept and fesetexceptflag duly make those calls, which would not be required were it not for this issue. The previous EGLIBC port, and the uClibc code copied from it, is fundamentally broken as regards any use of prctl for floating-point exceptions because it didn't use the PR_FP_EXC_SW_ENABLE bit in its prctl calls (and did various worse things, such as passing a pointer when prctl expected an integer). If you avoid anything where prctl is used, the clearing of sticky bits still means it will never give anything approximating correct exception semantics with existing kernels. I don't believe the patch makes things any worse for existing code that doesn't try to inform the kernel of changes to sticky bits - such code may get incorrect exceptions in some cases, but it would have done so anyway in other cases. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * | | | powerpc/booke64: Add LRAT error exception handlerMihai Caraman2014-01-072-0/+2
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LRAT (Logical to Real Address Translation) present in MMU v2 provides hardware translation from a logical page number (LPN) to a real page number (RPN) when tlbwe is executed by a guest or when a page table translation occurs from a guest virtual address. Add LRAT error exception handler to Booke3E 64-bit kernel and the basic KVM handler to avoid build breakage. This is a prerequisite for KVM LRAT support that will follow. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
OpenPOWER on IntegriCloud