summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot
Commit message (Collapse)AuthorAgeFilesLines
* Merge remote branch 'jwb/merge' into mergeBenjamin Herrenschmidt2010-08-241-0/+8
|\
| * powerpc/4xx: Device tree update for the 460ex DWC SATARupjyoti Sarmah2010-08-231-0/+8
| | | | | | | | | | | | | | Device tree update for the Applied micro processor 460ex on-chip SATA Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | dts: add ESDHC weird voltage bits workaroundRoy Zang2010-08-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P4080 ESDHC controller does not support 1.8V and 3.0V voltage. but the host controller capabilities register wrongly set the bits. This patch adds the workaround to correct the weird voltage setting bits. Only 3.3V voltage is supported for P4080 ESDHC controller. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | dts: add sdhci,auto-cmd12 field for p4080 device treeRoy Zang2010-08-111-0/+1
|/ | | | | | | | | | | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge commit 'kumar/next' into nextBenjamin Herrenschmidt2010-08-0518-20/+1551
|\
| * powerpc/8xx: Add support for the MPC8xx based boards from TQCHeiko Schocher2010-08-041-0/+172
| | | | | | | | | | | | | | | | | | | | Supported SMC1 (serial console), SCC1 Ethernet (10Mbps HD). FEC Ethernet, 8MB NOR CFI Flash. Tested on STK8xx with TQM860L (with FEC) and with TQM855M (without FEC). Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Introduce support for the Freescale P1022DS reference boardTimur Tabi2010-08-041-0/+633
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce basic support for the Freescale P1022DS reference board, based on the Freescale BSP for this board. This patch excludes the DIU, SSI, and MMC/SD drivers. Only a 36-bit DTS is provided. Update mpc86xx_smp_defconfig and mpc85xx_defconfig to support the P1022DS. This means enabling 64-bit physical address support, increasing the maximum zone order to 12 (to allow the DIU driver to allocate large chunks), and clean up the audio options to disable the deprecated OSS support. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 boardBradley Hughes2010-08-041-0/+380
| | | | | | | | | | | | | | | | | | | | | | | | This version uses "fsl,mpc8555..." instead of "fsl,85..." notation. There is also an 8541 version of this board so DTS for this board is specific to the 8555 processor. Another patch is coming to fix-up other DTS that use old notation. Signed-off-by: Bradley Hughes <bhughes@silicontkx.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Change deprecated binding for 85xx-based boardsBradley Hughes2010-08-047-14/+14
| | | | | | | | | | | | | | | | | | | | The "fsl,85..." style compatible binding was to be deprecated some time ago. This patch corrects existing occurrences of the incorrect binding. The memory-controller and l2-cache-controller are the only affected nodes. Signed-off-by: Bradley Hughes <bhughes@silicontkx.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/tqm85xx: update PCI interrupt-map attributeDmitry Eremin-Solenikov2010-08-046-6/+48
| | | | | | | | | | | | | | | | Update PCI IRQ mapping on TQM85xx platforms: include INTC and INTD on PCI-X slot and add INTA/INTB mapping for PCMCIA bridge. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/mpc8308rdb: support for MPC8308RDB board from FreescaleIlya Yanok2010-08-041-0/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for MPC8308RDB development board from Freescale. Supported devices: DUART Dual Ethernet NOR and NAND flashes I2C USB in peripheral mode PCIE support is broken by the commit 3da34aa ("powerpc/fsl: Support unique MSI addresses per PCIe Root Complex"). Works after revert. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Fix booting for P1021MDS boardsAnton Vorontsov2010-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P1021 processors have no dedicated ROM to store the QE microcode, so the fimrware is stored externally, and it is U-Boot responsibility to load it. It might be that the board is booting without QE, e.g. currently U-Boot doesn't support QE for P1021MDS boards, which means that QE isn't initialized, and so the board hangs early at boot. This patch fixes the issue by marking QE as disabled and checking the state in the probing code. U-Boot should fixup the state if it initialized the QE. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2010-08-041-0/+410
|\ \ | |/ |/|
| * powerpc/5121: add initial support for PDM360NG boardAnatolij Gustschin2010-08-011-0/+410
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer <markus.fischer.ec@ifm.com> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | powerpc/44x: Fix UART2/3 interrupt assignment in PPC460EX/GT dts filesStefan Roese2010-07-262-4/+4
|/ | | | | | | | | | | | | | UART2 and UART3 on 460EX/GT have incorrect interrupt mappings right now. UART2 should be 28 (0x1c) and UART3 29 (0x1d). This patch fixes this and switches to using decimal number instead of hex, since the AppliedMicro (AMCC) users manuals describe their inerrupt numbers in decimal. Thanks to Fabien Proriol for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabien Proriol <Fabien.Proriol@jdsu.com> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-06-272-2/+31
|\ | | | | | | | | | | | | | | | | | | * 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: fix lite5200 ethernet phy address powerpc/5200: Fix build error in sound code. powerpc/5200: fix oops during going to standby powerpc/5200: add lite5200 onboard I2C eeprom and flash maintainers: Add git trees for SPI and device tree of: Drop properties with "/" in their name
| * powerpc/5200: fix lite5200 ethernet phy addressDmitry Baryshkov2010-06-151-2/+2
| | | | | | | | | | | | | | | | | | According to my schematics, on Lite5200 board ethernet phy uses address 0 (all ADDR lines are pulled down). With this change I can talk to onboard phy (LXT971) and correctly use autonegotiation. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5200: add lite5200 onboard I2C eeprom and flashDmitry Baryshkov2010-06-152-0/+29
| | | | | | | | | | | | | | | | | | Add dts descriptions for onboard 256 byte I2C eeprom (pcf8582C-2) and 16MB NOR flash (am29lv652d). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> [grant.likely@secretlab.ca: added lite5200b eeprom and declared lite5200 gpios] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | powerpc/boot: Remove addRamdisk.c since it is now unusedPaul Mackerras2010-06-152-312/+1
|/ | | | | | | | | It was used in the dim distant past for adding initrds to images for legacy iSeries, but it's not even used for that now that we have initramfs. So remove it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge commit 'kumar/next' into nextBenjamin Herrenschmidt2010-05-314-11/+713
|\ | | | | | | | | Conflicts: arch/powerpc/sysdev/fsl_msi.c
| * powerpc/85xx: Add P1021MDS board supportHaiying Wang2010-05-241-0/+698
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P1021 is a dual e500v2 core based SOC with: * 3 eTSECs (eTSEC1/3 RGMII, eTSEC2 SGMII on this board) * 2 PCIe Controller * 1 USB2.0 controller * eSDHC, eSPI, I2C, DUART * eLBC (NAND, BCSR, PMC0/1) * Security Engine (SEC 3.3.2) * Quicc Engine (QE) Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Yu Liu <Yu.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Change MPC8572DS camp dtses for MSI sharingLi Yang2010-05-242-7/+15
| | | | | | | | | | | | | | | | | | Enable the sharing of MSI interrupt through AMP OSes in the mpc8572ds dtses. Signed-off-by: Zhao Chenhui <b26998@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDSAndy Fleming2010-05-211-4/+0
| | | | | | | | | | | | | | | | | | | | I believe support was disabled due to issues with earlier versions of the board/processor. At worst, adding the ports back into the device tree should result in enabling ports that don't work on older systems, so the default should be to enable them. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge commit 'jwb/next' into nextBenjamin Herrenschmidt2010-05-314-6/+576
|\ \ | |/ |/|
| * powerpc/44x: Add basic ICON PPC440SPe board supportStefan Roese2010-05-121-0/+447
| | | | | | | | | | | | | | | | | | | | ICON is based on the AppliedMicro 440SPe. It is equipped with 64MByte NOR FLASH, SODIMM, Gigabit ethernet, SM502 on PCI(X), LSI SAS1068E on PCIe0 and custom FPGA on PCIe1. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/44x: Fix UART clocks on 440SPeBenjamin Herrenschmidt2010-05-121-6/+6
| | | | | | | | | | | | | | | | | | The code to fixup the serial ports on 440SPe uses the incorrect addresses for these. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/44x: Add reset-type to katmai.dtsStefan Roese2010-05-071-0/+1
| | | | | | | | | | | | | | | | | | Katmai needs "reset-type" = "chip reset" (2) to correctly reboot the board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.Tirumala Marri2010-05-071-0/+122
| | | | | | | | | | | | | | | | Add support for PCI-e on the AMCC 460SX boards Signed-off-by: Tirumala Marri <tmarri@amcc.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/83xx: Add MCU LEDs support for MPC837xRDB and MPC8315RDB boardsAnton Vorontsov2010-05-174-0/+56
| | | | | | | | | | | | | | | | | | There are two front-panel LEDs on MPC837xRDB and MPC8315RDB boards: PWR and HDD. After adding appropriate nodes we can program these LEDs from kernel and user space. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Fix P1020RDB boot hang due USB2Anton Vorontsov2010-05-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since USB2 is shared with local bus, either local bus or USB2 should be disabled. By default U-Boot enables local bus, so we have to disable USB2, otherwise kernel hangs: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 28, io base 0xffe22000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 <hangs here> Note that U-Boot doesn't clear 'status' property when it enables USB2, so we have to comment out the whole node. To enable USB2, one can issue 'setenv hwconfig usb2:dr_mode=<host|peripheral>' command at the U-Boot prompt. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Add eTSEC 2.0 support for P1020RDB boardsAnton Vorontsov2010-05-171-0/+119
| | | | | | | | | | | | | | | | | | | | This patch adds support for eTSEC 2.0 as found in P1020. The changes include introduction of the group nodes for the etsec nodes. Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc: remove tls_ssl_stream descriptor type capability in sec3.3 nodeKim Phillips2010-05-171-1/+1
|/ | | | | | | | | | | | Technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor type, it lacks the ARC4 algorithm execution unit required to be able to execute anything meaningful with it. Change the node to agree with the documentation that declares that the sec3.3 really doesn't have such a descriptor type. Reported-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/4xx: Simple platform for the ISS 4xx simulatorTorez Smith2010-05-055-1/+334
| | | | | | | | | | | This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc: Add a new zImage for maple using a different link addressCorey Minyard2010-04-072-3/+7
| | | | | | | | | The maple platform failed to load because it's firmware could not take a link address of 0x4000000. A new platform type with a link address of 0x400000 had to be created for the maple. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge branch 'merge' of ↵Linus Torvalds2010-03-123-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/booke: Fix breakpoint/watchpoint one-shot behavior powerpc: Reduce printk from pseries_mach_cpu_die() powerpc: Move checks in pseries_mach_cpu_die() powerpc: Reset kernel stack on cpu online from cede state powerpc: Fix G5 thermal shutdown powerpc/pseries: Pass CPPR value to H_XIRR hcall powerpc/booke: Fix a couple typos in the advanced ptrace code powerpc: Fix SMP build with disabled CPU hotplugging. powerpc: Dynamically allocate pacas powerpc/perf: e500 support powerpc/perf: Build callchain code regardless of hardware event support. powerpc/cpm2: Checkpatch cleanup powerpc/86xx: Renaming following split of GE Fanuc joint venture powerpc/86xx: Convert gef_pic_lock to raw_spinlock powerpc/qe: Convert qe_ic_lock to raw_spinlock powerpc/82xx: Convert pci_pic_lock to raw_spinlock powerpc/85xx: Convert socrates_fpga_pic_lock to raw_spinlock
| * Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt2010-03-093-6/+6
| |\
| | * powerpc/86xx: Renaming following split of GE Fanuc joint ventureMartyn Welch2010-03-043-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch renames GE Fanuc boards following the split-up of the GE Fanuc joint venture. These boards are now made by GE Intelligent platorms. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-1/+1
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| * | tree-wide: Assorted spelling fixesDaniel Mack2010-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2010-02-288-62/+318
|\ \ \ | | |/ | |/| | | | | | | Conflicts: drivers/firmware/iscsi_ibft.c
| * | Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2010-02-191-22/+33
| |\ \
| | * | powerpc/mpc5121: correct DIU compatible propertyAnatolij Gustschin2010-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DIU driver should bind against "fsl,mpc5121-diu" directly. Add this compatible property to the match table and fix DTS and platform code accordingly. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | * | powerpc/mpc5121: update mpc5121ads DTSAnatolij Gustschin2010-02-161-22/+33
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Collects several changes needed after applying previous mpc5121 platform and driver patches: - Add mpc5121 reset module node - Clean up and fix NAND description, remove unused properties here and correct NAND flash chip size. - Clean up I2C nodes: remove obsolete "cell-index" properties, add "fsl,preserve-clocking" property - Add I2C RTC node for m41t61 RTC - Add I2C nodes for AD7414 temperature sensor and AT24C32CD3 EEPROM - Fix compatible property in DMA node - Clean up CAN nodes, remove unused "cell-index" properties - Fix compatible property in DIU node - USB node changes: - use "fsl,mpc5121-usb2-dr" compatible property only - remove "port0" and "port1" properties as these are only used for multi-port host(MHP) module which is not available on MPC5121. - use 'fsl,invert-drvvbus' and 'fsl,invert-pwr-fault' in USB node for internal PHY to specify polarities of the appropriate port pins. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boardsAnton Vorontsov2010-02-171-3/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds NOR Flash, LEDs and PIB support for MPC8568E-MDS boards. Plus, move bcsr node into localbus node, and add bcsr5 gpio-controller node. Some platform code modifications were also needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Add MSI section to GE PPC9A DTSMalcolm Crossley2010-02-171-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | Add the MSI section to the DTS file for the GE PPC9A. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Basic flash support for GE SBC610Martyn Welch2010-02-171-8/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support for the SBC610 VPX Single Board Computer from GE (PowerPC MPC8641D). This patch adds basic support for the on-board flash. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Add MSI section to GE SBC610 DTSMalcolm Crossley2010-02-171-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | Add the MSI section to the DTS file for the GE SBC610. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Fix GE SBC310 XMC site supportMalcolm Crossley2010-02-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Correction to interrupt map mask for GE SBC310 XMC site and addition of alias. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Add MSI section to GE SBC310 DTSMartyn Welch2010-02-171-0/+16
| | | | | | | | | | | | | | | | | | | | | Add the MSI section to the DTS file for the GE SBC310. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/44x: Update Glacier dtsStefan Roese2010-02-101-9/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync Glacier dts with latest Canyonlands version: - Add l2 cache support - Add NDFC support - Add RTC support - Add AD7414 hwmon support - Change EMAC compatible node from emac4 to emac4sync and correct the register size - Add support for ISA holes on 4xx PCI/X/E (as done in Benjamin Herrenschmidt's patch for Canyonlands) - Add Crypto device node Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
OpenPOWER on IntegriCloud