summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts
Commit message (Collapse)AuthorAgeFilesLines
* Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2010-02-191-22/+33
|\
| * powerpc/mpc5121: correct DIU compatible propertyAnatolij Gustschin2010-02-171-1/+1
| | | | | | | | | | | | | | | | | | The DIU driver should bind against "fsl,mpc5121-diu" directly. Add this compatible property to the match table and fix DTS and platform code accordingly. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/mpc5121: update mpc5121ads DTSAnatolij Gustschin2010-02-161-22/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Collects several changes needed after applying previous mpc5121 platform and driver patches: - Add mpc5121 reset module node - Clean up and fix NAND description, remove unused properties here and correct NAND flash chip size. - Clean up I2C nodes: remove obsolete "cell-index" properties, add "fsl,preserve-clocking" property - Add I2C RTC node for m41t61 RTC - Add I2C nodes for AD7414 temperature sensor and AT24C32CD3 EEPROM - Fix compatible property in DMA node - Clean up CAN nodes, remove unused "cell-index" properties - Fix compatible property in DIU node - USB node changes: - use "fsl,mpc5121-usb2-dr" compatible property only - remove "port0" and "port1" properties as these are only used for multi-port host(MHP) module which is not available on MPC5121. - use 'fsl,invert-drvvbus' and 'fsl,invert-pwr-fault' in USB node for internal PHY to specify polarities of the appropriate port pins. Signed-off-by: Piotr Ziecik <kosmo@semihalf.com> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | powerpc/85xx: Add NOR, LEDs and PIB support for MPC8568E-MDS boardsAnton Vorontsov2010-02-171-3/+62
| | | | | | | | | | | | | | | | | | | | | | This patch adds NOR Flash, LEDs and PIB support for MPC8568E-MDS boards. Plus, move bcsr node into localbus node, and add bcsr5 gpio-controller node. Some platform code modifications were also needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Add MSI section to GE PPC9A DTSMalcolm Crossley2010-02-171-0/+16
| | | | | | | | | | | | | | | | Add the MSI section to the DTS file for the GE PPC9A. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Basic flash support for GE SBC610Martyn Welch2010-02-171-8/+42
| | | | | | | | | | | | | | | | | | Support for the SBC610 VPX Single Board Computer from GE (PowerPC MPC8641D). This patch adds basic support for the on-board flash. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Add MSI section to GE SBC610 DTSMalcolm Crossley2010-02-171-0/+16
| | | | | | | | | | | | | | | | Add the MSI section to the DTS file for the GE SBC610. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Fix GE SBC310 XMC site supportMalcolm Crossley2010-02-171-1/+2
| | | | | | | | | | | | | | | | | | Correction to interrupt map mask for GE SBC310 XMC site and addition of alias. Signed-off-by: Malcolm Crossley <malcolm.crossley2@gefanuc.com> Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Add MSI section to GE SBC310 DTSMartyn Welch2010-02-171-0/+16
| | | | | | | | | | | | | | Add the MSI section to the DTS file for the GE SBC310. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/44x: Update Glacier dtsStefan Roese2010-02-101-9/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync Glacier dts with latest Canyonlands version: - Add l2 cache support - Add NDFC support - Add RTC support - Add AD7414 hwmon support - Change EMAC compatible node from emac4 to emac4sync and correct the register size - Add support for ISA holes on 4xx PCI/X/E (as done in Benjamin Herrenschmidt's patch for Canyonlands) - Add Crypto device node Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/44x: Update Arches dtsStefan Roese2010-02-101-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Sync Arches dts with latest Canyonlands version: - Add 16k FIFO size to supported EMAC nodes - Add next-level-cache property - Add Crypto device node Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/44x: Add MTD support (NOR FLASH) to Katmai dtsStefan Roese2010-02-101-19/+52
|/ | | | | | | | | | | | | | | | This patch adds NOR FLASH MTD support to the Katmai (440SPe) dts file. For this the OPB ranges address is mapped differently (base 0x00000000 -> 0xe0000000). This results in the address being identical to the lower 32bit of its physical address. This is needed for the MTD mapping to work correctly, since U-Boot will insert the physical addresses of the EBC chip selects into the EBC ranges property. This is the way its done in most other 4xx dts files as well. Additionally with a small whitespace cleanup. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* Merge commit 'jwb/next' into mergeBenjamin Herrenschmidt2009-12-212-2/+52
|\
| * powerpc/44x: Increase warp SD bufferSean MacLennan2009-12-111-1/+1
| | | | | | | | | | | | | | Newer revs of the FPGA have a larger SD buffer. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/44x: Extend Katmai dts for ADMA and RAID56 supportAnatolij Gustschin2009-12-111-1/+51
| | | | | | | | | | | | | | | | | | | | | | Add nodes for PPC440SPe DMA, I2O, XOR engines and Memory Queue module which are used in the updated PPC440SPe ADMA driver. Also extend plb ranges property to specify address ranges for DMA0/1 and I2O engines. Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt2009-12-212-1/+108
|\ \
| * | powerpc/83xx: Add power management support for MPC8315E-RDB boardsAnton Vorontsov2009-12-101-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add nodes for PMC and GTM controllers. GTM4 can be used as a wakeup source; - Add fsl,magic-packet properties to eTSEC nodes, i.e. wake-on-lan support. Unlike MPC8313 processors, MPC8315 can resume from deep sleep upon magic packet reception. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/83xx: mpc8349emitx - add leds-gpio bindingDmitry Eremin-Solenikov2009-12-091-0/+18
| | | | | | | | | | | | | | | Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/83xx: mpc8349emitx - add OF descriptions of LocalBus devicesDmitry Eremin-Solenikov2009-12-091-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | Describe all LocalBus chipselects on MPC8349E-MITX board. Also add flash bindings. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/83xx: mpc8349emitx - populate I2C busses in device treeDmitry Eremin-Solenikov2009-12-091-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | Add OF descriptions of EEPROM, two GPIO extenders and SPD hanging on I2C on this board. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/83xx: mpc8349emitx - add gpio controller declarationsDmitry Eremin-Solenikov2009-12-091-0/+18
| |/ | | | | | | | | | | | | mpc8349 bears two GPIO controllers. Enable support for them. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2009-12-162-0/+332
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits) powerpc: fix up for mmu_mapin_ram api change powerpc: wii: allow ioremap within the memory hole powerpc: allow ioremap within reserved memory regions wii: use both mem1 and mem2 as ram wii: bootwrapper: add fixup to calc useable mem2 powerpc: gamecube/wii: early debugging using usbgecko powerpc: reserve fixmap entries for early debug powerpc: wii: default config powerpc: wii: platform support powerpc: wii: hollywood interrupt controller support powerpc: broadway processor support powerpc: wii: bootwrapper bits powerpc: wii: device tree powerpc: gamecube: default config powerpc: gamecube: platform support powerpc: gamecube/wii: flipper interrupt controller support powerpc: gamecube/wii: udbg support for usbgecko powerpc: gamecube/wii: do not include PCI support powerpc: gamecube/wii: declare as non-coherent platforms powerpc: gamecube/wii: introduce GAMECUBE_COMMON ... Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c. Hopefully even close to correctly.
| * powerpc: wii: device treeAlbert Herranz2009-12-121-0/+218
| | | | | | | | | | | | | | | | | | Add a device tree source file for the Nintendo Wii video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc: gamecube: device treeAlbert Herranz2009-12-121-0/+114
| | | | | | | | | | | | | | | | Add a device tree source file for the Nintendo GameCube video game console. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | powerpc/44x: Fix PCI node in Yosemite DTSCurtis Wald2009-12-041-12/+2
| | | | | | | | | | | | | | | | | | The stanza for PCI was copied from Bamboo which has four PCI slots. Yosemite only has one PCI slot which is mapped to IDSEL 12, ADDR 22, IRQ2 Vector 25, INTA. Signed-off-by: Curtis Wald <cwald@watchguardvideo.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/44x: Fix DMA ranges in DTS file for Katmai board.pbathija@amcc.com2009-12-041-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | Set PCI-E node inbound DMA ranges size to 4GB for correct boot up of Katmai. Signed-off-by: Pravin Bathija <pbathija@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Acked-by: Prodyut Hazarika <phazarika@amcc.com> Acked-by: Loc Ho <lho@amcc.com> Acked-by: Tirumala Reddy Marri <tmarri@amcc.com> Acked-by: Victor Gallardo <vgallardo@amcc.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | Merge commit 'jwb/next' into nextBenjamin Herrenschmidt2009-11-248-3/+36
|\ \
| * | powerpc/44x: Enable 64bit (>= 4GB) memory size in Katmai dtsStefan Roese2009-11-041-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Additionally to increasing #size-cells to in the root node, we also need to explicitly define the ranges property in the plb node, because of the different #size-cells between child and parent. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | powerpc/4xx: Add 16K FIFO size DTS entries on supported platformsDave Mitchell2009-11-047-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding tx/rx-fifo-size-gige to EMAC fields for evaluation kit DTS files where appropriate. Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | | powerpc/p4080: Add basic support for p4080ds platformKumar Gala2009-11-201-0/+554
| | | | | | | | | | | | | | | | | | | | | Add basic support for the P4080 DS reference board. None of the data path devices (ethernet, crypto, pme) are support at this time. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/86xx: Support for NVRAM on GE Fanuc's PPC9AMartyn Welch2009-11-201-0/+6
| | | | | | | | | | | | | | | | | | | | | Add support for NVRAM on GE Fanuc's PPC9A. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/86xx: Support for NVRAM on GE Fanuc's SBC310Martyn Welch2009-11-201-0/+6
| | | | | | | | | | | | | | | | | | | | | Add support for NVRAM on GE Fanuc's SBC310. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/86xx: Enable NVRAM on GE Fanuc's SBC610Martyn Welch2009-11-201-0/+6
| | | | | | | | | | | | | | | | | | | | | This patch enables the NVRAM found on the GE Fanuc SBC610 Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/83xx: Add power management support for MPC83xx QE boardsAnton Vorontsov2009-11-115-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | Simply add power management controller nodes and sleep properties. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/86xx: Add power management support for MPC8610HPCD boardsAnton Vorontsov2009-11-111-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds needed nodes and properties to support suspend/resume on the MPC8610HPCD boards. There is a dedicated switch (SW9) that is used to wake up the boards. By default the SW9 button is routed to IRQ8, but could be re-routed (via PIXIS) to sreset. With 'no_console_suspend' kernel command line argument specified, the board is also able to wakeup upon serial port input. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> [dts] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/85xx: Add power management support for MPC85xxMDS boardsAnton Vorontsov2009-11-112-78/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add power management controller nodes; - Add interrupts for RTC nodes, the RTC interrupt may be used as a wakeup source; - Add sleep properties (DEVDISR bit mask) and sleep-nexus nodes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/85xx: Added P1020RDB Platform support.Poonam Aggrwal2009-11-111-0/+477
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | P1020 is another member of Freescale QorIQ series of processors. It is an e500 based dual core SOC. Being a scaled down version of P2020 it has following differences from P2020: - 533MHz - 800MHz core frequency. - 256Kbyte L2 cache - Ethernet controllers with classification capabilities(new controller). From board perspective P1020RDB is same as P2020RDB. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/85xx: Create dts for each core in CAMP mode for P2020RDBPoonam Aggrwal2009-11-112-0/+547
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch creates the dts files for each core and splits the devices between the two cores for P2020RDB. core0 has memory, L2, i2c, spi, dma1, usb, eth0, eth1, crypto, global-util, pci0, core1 has L2, dma2, eth0, pci1, msi. MPIC is shared between two cores but each core will protect its interrupts from other core by using "protected-sources" of mpic. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boardsAnton Vorontsov2009-11-051-1/+1
| | | | | | | | | | | | | | u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boardsAnton Vorontsov2009-11-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted. This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers. Reported-by: Liu Yu <Yu.Liu@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fieldsPaul Gortmaker2009-11-051-9/+8
|/ | | | | | | | | | | | | | | | | | | The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/boot/dts: drop obsolete 'fsl5200-clocking'Wolfram Sang2009-10-1510-17/+0
| | | | | | | | | The 'fsl5200-clocking'-property was dropped since 0d1cde235874b00905bce23f659690d060ebf475. Remove all occurences in dts-files. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* mpc5200: support for the MAN mpc5200 based board mucmc52Heiko Schocher2009-10-151-0/+332
| | | | | | | | | | | | - serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - IDE support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* mpc5200: support for the MAN mpc5200 based board uc101Heiko Schocher2009-10-151-0/+284
| | | | | | | | | | | | | - serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - I2C with PCF8563 and Temp. Sensor ADM9240 - IDE support Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc: introduce and document sdhci,wp-inverted property for eSDHCAnton Vorontsov2009-09-237-0/+7
| | | | | | | | | | | | | | | | | | | eSDHC block in MPC837x SOCs reports inverted write-protect state, soon sdhci-of driver will look for sdhci,wp-inverted properties to decide whether apply a specific quirk. So, document the property and add it to device tree source files. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: David Vrabel <david.vrabel@csr.com> Cc: Ben Dooks <ben@fluff.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBCSolomon Peachy2009-08-311-0/+294
| | | | | | | | | | | | | | | This patch adds support for the ESTeem 195E Hotfoot SBC. There are several variants of the SBC deployed, single/dual ethernet+serial, and also 4MB/8MB flash variations. In the interest of having a single kernel image boot on all boards, the cuboot shim detects the differences and mangles the DTS tree appropriately. With the exception of the CF interface that was never populated on production boards, this code/DTS supports all boardpop options. Signed-off-by: Solomon Peachy <solomon@linux-wlan.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.fkan@amcc.com2009-08-311-0/+421
| | | | | | | | | | This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Acked-by: Tirumala Marri <tmarri@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/44x: Update Arches dtsStefan Roese2009-08-311-0/+50
| | | | | | | | | | | This patch adds some nodes to the AMCC Arches dts: - L2 cache support - NOR FLASH mapping with default partitioning - I2C HWMON device (AD7414) Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc/85xx: Add QE USB support for MPC8569E-MDS boardsAnton Vorontsov2009-08-251-0/+45
| | | | | | | | | | | | | | | - Add gpio-controller node for BCSR17, it is used to control USB speed and VBUS; - Add timer node for QE GTM, needed for USB host; - Add usb node itself; - Add some probing code for BCSR GPIOs. NOTE: QE USB doesn't work on prototype boards, but should work on pilot boards if specs and schematics are correct, though we don't have the pilot boards to actually test it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boardsAnton Vorontsov2009-08-251-0/+8
| | | | | | | | | | | | - Add usb node; - Configure pins and clocks; - Enable USB function in BCSR. The support was successfully tested using serial and ethernet gadget drivers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
OpenPOWER on IntegriCloud