summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/mpc834x_mds.dts
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/mpc83xx: Fix usb mux setup for mpc834xPeter Korsgaard2009-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | usb0 and usb1 mux settings in the sicrl register were swapped (twice!) in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci and full speed devices. The USB port config on mpc834x is done using 2 muxes: Port 0 is always used for MPH port 0, and port 1 can either be used for MPH port 1 or DR (unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM figure 1-4.. mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit positions of the usb0 / usb1 mux settings swapped. It would basically work if you specified port1 instead of port0 for the MPH controller (and happened to use ULPI phys), which is what all the 834x dts have done, even though that configuration is physically invalid. Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Remove cell-index from PCI nodesKumar Gala2009-05-191-2/+0
| | | | | | | | The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Move gianfar mdio nodes under the ethernet nodesAnton Vorontsov2009-03-241-37/+44
| | | | | | | | | | | | | Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* gianfar: Convert gianfar to an of_platform_driverAndy Fleming2008-12-161-0/+19
| | | | | | | | | | | Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* powerpc: Remove device_type = "board_control" properties in .dts filesAnton Vorontsov2008-10-201-1/+1
| | | | | | | | | | | | | We don't want to encourage the bogus device_type usage. The device type isn't used in the code, so we can simply remove it from the documentation and dts files. Boards should specify proper compatible entries instead. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.John Rigby2008-10-131-2/+4
| | | | | | | | | | | | | | | | | | | Modify mpc83xx_add_bridge to get config space register base address from the device tree instead of immr + hardcoded offset. 83xx pci nodes have this change: register properties now contain two address length tuples: First is the pci bridge register base, this has always been there. Second is the config base, this is new. This is documented in dts-bindings/fsl/83xx-512x-pci.txt The changes accomplish these things: mpc83xx_add_bridge no longer needs to call get_immrbase it uses hard coded addresses if the second register value is missing Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/83xx: Add missing cell-index to dma-channel device nodesKumar Gala2008-09-231-0/+4
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: proliferate simple-bus compatibility to soc nodesKim Phillips2008-07-291-0/+1
| | | | | | | | | | | | | | | add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: update crypto node definition and device tree instancesKim Phillips2008-07-141-10/+5
| | | | | | | | | | delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Add dma nodes to 83xx, 85xx and 86xx boardsKumar Gala2008-06-271-0/+35
| | | | | | | | | Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Correct 2nd PCI controller interrupt value in mpc834x_mds dtsKim Phillips2008-02-051-1/+1
| | | | | | | | According to the 8349EA ref man, the second PCI PHB IRQ is 67. Thanks to Peter Van Ackeren for finding this. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.Paul Gortmaker2008-01-281-18/+18
| | | | | | | | | | | | | | | | | | | | | | | This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov2008-01-281-2/+2
| | | | | | | | | | | Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1Paul Gortmaker2008-01-281-125/+127
| | | | | | | | | Move mpc834x_mds device tree source forward to dts-v1 format. Nothing too complex in this one, so it boils down to just adding a bunch of 0x in the right places and converting clock speeds to decimal. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: USB device tree cleanupsLi Yang2008-01-231-2/+0
| | | | | | | Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] FSL: Added aliases node to device treesKumar Gala2007-12-121-4/+17
| | | | | | | | Added aliases nodes for kurobox, 83xx, 85xx, and 86xx platforms. This included added labels and cell-index properties for serial and pci nodes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] FSL: enet device tree cleanupsKumar Gala2007-12-121-19/+7
| | | | | | | | | | | | | | * Removed address fields in ethernet nodes * Removed #address-cells, #size-cells from gianfar nodes * Added cell-index to gianfar and ucc ethernet nodes * Added enet[0..3] labels * Renamed compatible node for gianfar mdio to "fsl,gianfar-mdio" * Removed device_type = "mdio" The matching for gianfar mdio still supports the old "mdio"/"gianfar" combo but it is now considered deprecated. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] FSL: I2C device tree cleanupsKumar Gala2007-12-111-2/+2
| | | | | | | | * Removed device_type = "i2c" * Added missing second I2C controller on MPC8548 CDS, MPC8544 DS * Added #address-cells, #size-cells, and cell-index where missing Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xxx: MDS board RTC fixesKim Phillips2007-11-201-0/+9
| | | | | | | | | Now the rtc class ds1374 driver has been added, remove the old rtc driver hookup code, add rtc node to device trees, and turn on the new driver in the defconfigs. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] spi: Use fsl_spi instead of mpc83xx_spiPeter Korsgaard2007-10-081-2/+2
| | | | | | | | According to booting-without-of.txt, compatible should be "fsl_spi" and mode "cpu" or "qe" for the fsl SPI controllers. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] mpc8349: Add linux,network-index to ethernet nodes in device treeGrant Likely2007-09-221-0/+2
| | | | | | | | | | | | cuImage needs to know the logical index of the ethernet devices in order to assign mac addresses. This adds the needed properties. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David Gibson <david@gibson.dropbear.id.au> CC: Scott Wood <scottwood@freescale.com> CC: Kumar Gala <galak@kernel.crashing.org> CC: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Move PCI nodes to be sibilings with SOC nodesKumar Gala2007-09-141-120/+120
| | | | | | | | | | | Updated the device trees to have the PCI nodes be at the same level as the SOC node. This is to make it so that the SOC nodes children address space is just on chip registers and not other bus memory as well. Also, for PCIe nodes added a P2P bridge to handle the virtual P2P bridge that exists in the PHB. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] DTS cleanupKumar Gala2007-09-141-3/+0
| | | | | | | | | | | | Removed the following cruft from .dts files: * 32-bit in cpu node -- doesn't exist in any spec and not used by kernel * removed built-in (chrp legacy) * Removed #interrupt-cells in places they don't need to be set * Fixed ranges on lite5200* * Removed clock-frequency from i8259 pic node, not sure where this came from * Removed big-endian from i8259 pic nodes, this was just bogus Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Update PCI nodes in the 83xx/85xx boards device treeRoy Zang2007-07-231-2/+2
| | | | | | | | | | | | | Updated the 83xx & 85xx device tree PCI related compartible property. Used the following compatible properties: PCI "fsl,mpc8349-pci" PCI "fsl,mpc8540-pci" PCI-X: "fsl,mpc8540-pcix" PCIe: "fsl,mpc8548-pcie" Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix MAC address entries for 83xx, 85xx, and 86xx device treesTimur Tabi2007-07-031-0/+10
| | | | | | | | | | | For the 83xx, 85xx, and 86xx device trees, add a "local-mac-address" property to every Ethernet node that didn't have one. Add a comment indicating that the "address" and/or "mac-address" properties are deprecated in DTS files and will be removed at a later time. Change all MAC address properties to have a zero MAC address value. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Fix the PCI ranges in the MPC834x_MDS device tree.Scott Wood2007-05-091-2/+2
| | | | | | | | | The MPC834x_MDS device tree's PCI non-prefetchable MMIO range was specified incorrectly. Both the local and bus addresses start at 0x90000000. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Remove unused, undocumented #cpus property from cpus nodeStuart Yoder2007-03-091-1/+0
| | | | | | | | | The #cpus property is unused and undocumented and is therefore being removed. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 83xx: Cleaned up 83xx platform dts filesKumar Gala2007-02-161-84/+80
| | | | | | | | * Fixed up top level compatible property for all boards * Removed explicit linux,phandle usage. Use references and labels now * Fixed interrupt sense attribute, some interrupts were marked edge, that are level Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Updated and renamed MPC834x SYS to MPC834x MDSKumar Gala2007-02-091-0/+334
The MPC834x SYS board has always been called the MPC834x MDS since its public release. Removed all references to SYS and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc834x_mds*). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
OpenPOWER on IntegriCloud