summaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/platform
Commit message (Collapse)AuthorAgeFilesLines
...
| * m68knommu: some boards use fixed phy for FEC ethernetGreg Ungerer2010-10-221-0/+16
| | | | | | | | | | | | | | Define a fixed phy setup for use on boarts that directly connect the FEC ethernet controller to a switch. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: support the external GPIO based interrupts of the 5272Greg Ungerer2010-10-211-5/+51
| | | | | | | | | | | | | | | | | | The external GPIO interrupts of the ColdFire 5272 SoC are edge triggered, unlike the internal interrupt sources (which are level triggered). Add proper support for these interrupts. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: change to new flag variablesmatt mooney2010-10-2112-24/+24
| | | | | | | | | | | | | | Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: add basic mmu-less m548x supportPhilippe De Muyter2010-10-214-0/+279
| | | | | | | | | | | | | | | | | | | | | | | | Add a very basic mmu-less support for coldfire m548x family. This is perhaps also valid for m547x family. The port comprises the serial, tick timer and reboot support. The gpio part compiles but is empty. This gives a functional albeit limited linux for the m548x coldfire family. This has been tested on a Freescale M548xEVB Lite board with a M5484 processor and the default dbug monitor. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: stop using __do_IRQGreg Ungerer2010-10-216-27/+22
| | | | | | | | | | | | | | | | | | | | | | The use of __do_IRQ is deprecated, so lets stop using it. Generally the interrupts on the supported processors here are level triggered, so this is strait forward to switch over to using the standard handle_level_irq flow handler. (Although some ColdFire parts support edge triggered GPIO line interrupts we have no support for them yet). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC.Philippe De Muyter2010-10-212-9/+9
| | | | | | | | | | | | | | | | | | In m68k/m68knommu assembly files, the same value is called sometimes PT_OFF_VECTOR, but more frequently PT_OFF_FORMATVEC. Standardize name to PT_OFF_FORMATVEC. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: add support for Coldfire 547x/548x interrupt controllerPhilippe De Muyter2010-10-211-8/+32
| | | | | | | | | | | | | | | | | | | | The Coldfire MCF547x/MCF548x have the same interrupt controller as the MCF528x e.g., but only one, not two as in the MCF528x. Modify intc-2.c to support only one interrupt controller if MCFICM_INTC1 is not defined. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: whitespace cleanup in 68328/entry.SPhilippe De Muyter2010-10-211-7/+7
| | | | | | | | | | Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: Document supported chips in intc-2.c and intc-simr.c.Philippe De Muyter2010-10-212-1/+7
| | | | | | | | | | | | | | | | | | The chips lists were in commit logs, but should also be in source files. This way it is easier to choose the right source file for a not yet supported Coldfire. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * m68knommu: fix strace support for 68328/68360Philippe De Muyter2010-10-212-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strace enabled is marked using the `flags' field of the `thread_info' struct. 68360 version of entry.S did test a wrong bit in a wrong structure (task_struct). 68328 version of entry.S did test the right bit in the right structure, but wrongly, because the `flags' field is 32 bit wide, while the used assembler insn (btst) only accesses a 8 bit byte in memory. Fix both using code already used in the coldfire version of entry.S Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * arch/m68knommu: Removing dead 68328_SERIAL_UART2 config optionChristian Dietrich2010-10-211-5/+0
| | | | | | | | | | | | | | | | CONFIG_68328_SERIAL_UART2 doesn't exist in Kconfig, therefore removing all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * arch/m68knommu: Removing dead RAM_{16,32}_MB config optionChristian Dietrich2010-10-211-6/+0
| | | | | | | | | | | | | | | | CONFIG_RAM_{16,32}_MB doesn't exist in Kconfig, therefore removing all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
| * arch/m68knommu: Removing dead RELOCATE config optionChristian Dietrich2010-10-211-27/+0
| | | | | | | | | | | | | | | | CONFIG_RELOCATE doesn't exist in Kconfig, therefore removing all references to it from the source. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-10-221-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Add missing I/O macros {in,out}{w,l}_p() for !CONFIG_ISA m68k: Remove big kernel lock in cache flush code m68k: __pa(): cast arg to long fbdev: atafb - Remove undead ifdef ATAFB_FALCON zorro: Fix device_register() error handling fbdev/m68k: Fix section mismatches in q40fb.c m68k/m68knommu: merge the MMU and non-MMU traps.h m68k/m68knommu: merge MMU and non-MMU thread_info.h m68k/m68knommu: merge MMU and non-MMU atomic.h m68k/m68knommu: clean up page.h m68k/m68knommu: merge machdep.h files into a single file m68k/m68knommu: merge MMU and non-MMU string.h m68k/m68knommu: Remove dead SMP config option m68k: move definition of THREAD_SIZE into thread_info_mm.h m68k: Use asm-generic/ioctls.h (enables termiox) m68k: Remove dead GG2 config option
| * | m68k/m68knommu: merge MMU and non-MMU thread_info.hGreg Ungerer2010-10-221-2/+2
| |/ | | | | | | | | | | | | | | The MMU and non-MMU versions of thread_info.h are quite similar. Merge the two files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
* | Fix IRQ flag handling namingDavid Howells2010-10-071-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the IRQ flag handling naming. In linux/irqflags.h under one configuration, it maps: local_irq_enable() -> raw_local_irq_enable() local_irq_disable() -> raw_local_irq_disable() local_irq_save() -> raw_local_irq_save() ... and under the other configuration, it maps: raw_local_irq_enable() -> local_irq_enable() raw_local_irq_disable() -> local_irq_disable() raw_local_irq_save() -> local_irq_save() ... This is quite confusing. There should be one set of names expected of the arch, and this should be wrapped to give another set of names that are expected by users of this facility. Change this to have the arch provide: flags = arch_local_save_flags() flags = arch_local_irq_save() arch_local_irq_restore(flags) arch_local_irq_disable() arch_local_irq_enable() arch_irqs_disabled_flags(flags) arch_irqs_disabled() arch_safe_halt() Then linux/irqflags.h wraps these to provide: raw_local_save_flags(flags) raw_local_irq_save(flags) raw_local_irq_restore(flags) raw_local_irq_disable() raw_local_irq_enable() raw_irqs_disabled_flags(flags) raw_irqs_disabled() raw_safe_halt() with type checking on the flags 'arguments', and then wraps those to provide: local_save_flags(flags) local_irq_save(flags) local_irq_restore(flags) local_irq_disable() local_irq_enable() irqs_disabled_flags(flags) irqs_disabled() safe_halt() with tracing included if enabled. The arch functions can now all be inline functions rather than some of them having to be macros. Signed-off-by: David Howells <dhowells@redhat.com> [X86, FRV, MN10300] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [Tile] Signed-off-by: Michal Simek <monstr@monstr.eu> [Microblaze] Tested-by: Catalin Marinas <catalin.marinas@arm.com> [ARM] Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [AVR] Acked-by: Tony Luck <tony.luck@intel.com> [IA-64] Acked-by: Hirokazu Takata <takata@linux-m32r.org> [M32R] Acked-by: Greg Ungerer <gerg@uclinux.org> [M68K/M68KNOMMU] Acked-by: Ralf Baechle <ralf@linux-mips.org> [MIPS] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [PA-RISC] Acked-by: Paul Mackerras <paulus@samba.org> [PowerPC] Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [S390] Acked-by: Chen Liqin <liqin.chen@sunplusct.com> [Score] Acked-by: Matt Fleming <matt@console-pimps.org> [SH] Acked-by: David S. Miller <davem@davemloft.net> [Sparc] Acked-by: Chris Zankel <chris@zankel.net> [Xtensa] Reviewed-by: Richard Henderson <rth@twiddle.net> [Alpha] Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> [H8300] Cc: starvik@axis.com [CRIS] Cc: jesper.nilsson@axis.com [CRIS] Cc: linux-cris-kernel@axis.com
* Merge branch 'for-35' of git://repo.or.cz/linux-kbuildLinus Torvalds2010-06-012-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits) kbuild: Revert part of e8d400a to resolve a conflict kbuild: Fix checking of scm-identifier variable gconfig: add support to show hidden options that have prompts menuconfig: add support to show hidden options which have prompts gconfig: remove show_debug option gconfig: remove dbg_print_ptype() and dbg_print_stype() kconfig: fix zconfdump() kconfig: some small fixes add random binaries to .gitignore kbuild: Include gen_initramfs_list.sh and the file list in the .d file kconfig: recalc symbol value before showing search results .gitignore: ignore *.lzo files headerdep: perlcritic warning scripts/Makefile.lib: Align the output of LZO kbuild: Generate modules.builtin in make modules_install Revert "kbuild: specify absolute paths for cscope" kbuild: Do not unnecessarily regenerate modules.builtin headers_install: use local file handles headers_check: fix perl warnings export_report: fix perl warnings ...
| * Rename .data.initvect to .data..initvect.Denys Vlasenko2010-03-032-2/+2
| | | | | | | | | | Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | arch/m68knommu/platform/68360/commproc.c: Checkpatch cleanupAndrea Gelmini2010-05-241-2/+2
| | | | | | | | | | | | | | Checkpatch cleanup Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | m68knommu: add smc91x support for ColdFire NETtel boardsGreg Ungerer2010-05-242-1/+156
| | | | | | | | | | | | | | | | | | The ColdFire based NETtel boards use the SMC9196 ethernet devices. Switch to using a platform setup for these parts using the smc91x driver. The init code is taken strait out of arch/m68k/include/asm/mcfsmc.h, just cleaned up a bit. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | m68knommu: add smc91x support to ColdFire 5249 platformGreg Ungerer2010-05-241-0/+48
| | | | | | | | | | | | | | The Freescale M5249EVB board is fitted with an SMC LAN91c11 ethernet device. Add platform support to the M5249EVB setup code to support this. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | m68knommu: Coldfire QSPI platform supportSteven King2010-05-176-0/+929
| | | | | | | | | | | | | | | | | | | | | | Since Grant has added the coldfire-qspi driver to next-spi, here is the platform support for the parts that have qspi hardware. This sets up gpio to do the spi chip select using the default chip select pins; it should be trivial for boards that require different or additional spi chip selects to use other gpios as needed. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* | m68knommu: remove a duplicate vector setting line for 68360Greg Ungerer2010-04-211-1/+0
|/ | | | | | | Remove a duplicate vector setting line for the 68360 interrupt setup. Pointed out by Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: fix invalid flags on coldfire pit clocksourcejohn stultz2010-01-161-1/+0
| | | | | | | | | | | | | | | | | The m68knommu coldfire pit clocksource looks like it was incorrectly marked as a continuous clocksource. Running with it marked as a continuous clocksource could cause hangs when the system switches to highres mode or enables nohz. This patch removes the CLOCK_SOURCE_IS_CONTINUOUS flag on the coldfire pit clocksource. This will disallow systems using this clocksource from entering oneshot mode (disabling highres timers and nohz). Signed-off-by: John Stultz <johnstul@us.ibm.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Cc: Steven King <sfking@fdwdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* m68knommu: export clk_* symbols in clk.cSteven King2009-12-041-1/+6
| | | | | | | | export the clk_* stubs defined in arch/m68knommu/platform/coldfire/clk.c so they can be used by modules. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@goober.(none)>
* m68knommu: add uboot commandline argument passing supportLennart Sorensen2009-12-041-0/+10
| | | | | | | | | | | | | | | | This patch adds m68knommu support for getting the kernel command line arguments from uboot, including the passing of an initrd image from uboot. We use this on a 5270/5271 based board, and have used it on the 5271evb development board. It is based on a patch found in the linux-2.6-denx git tree, although that tree seems to have had lots of other changes since which are not in the main Linus kernel. I believe this will work on all coldfires, although other m68knommu might be missing the _init_sp stuff in head.S as far as I can tell. I only have the coldfire to test on. Signed-off-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: Coldfire GPIO correctionsSteven King2009-12-043-5/+8
| | | | | | | | Pin 0 of the EPORT is not connected on the 523x, 5271, 5275 and 528x and the TIMER on the 523x has 8 pins, not 4. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: fix rename of pt_regs offset defines breakageGreg Ungerer2009-09-303-34/+34
| | | | | | | | | Commit f159ee782990aacb5494738c98f13a2aa61dbb4a ("locking, m68k/asm-offsets: Rename pt_regs offset defines") breaks the m68knommu entry code that relies on these define names. Fix the files to match the new define names. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: remove duplicated #includeHuang Weiyi2009-09-301-1/+0
| | | | | Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: set multi-function pins for ethernet when enabledGreg Ungerer2009-09-161-0/+15
| | | | | | | | | | The ethernet pins on the 532x ColdFire CPU family are multi-function pins. We need to enable them as ethernet pins when using the FEC ethernet driver. Bug report, and older patch, from timothee@manaud.net. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: remove ColdFire direct interrupt register accessGreg Ungerer2009-09-161-57/+8
| | | | | | | | Now that the ColdFire 5272 has full interrupt controller functionality we can remove all the interrupt masking and acking code from the FEC ethernet driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: create a speciailized ColdFire 5272 interrupt controllerGreg Ungerer2009-09-163-2/+140
| | | | | | | | The ColdFire 5272 CPU has a very different interrupt controller than any of the other ColdFire parts. It needs its own controller code to correctly setup and ack interrupts. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: add support for second interrupt controller of ColdFire 5249Greg Ungerer2009-09-162-1/+60
| | | | | | | | | The ColdFire 5249 CPU has a second (compleletly different) interrupt controller. It is the only ColdFire CPU that has this type. It controlls GPIO interrupts amongst a number of interrupts from other internal peripherals. Add support code for it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: clean up old ColdFire timer irq setupGreg Ungerer2009-09-161-7/+2
| | | | | | | | The recent changes to the old ColdFire interrupt controller code means we no longer need to manually unmask the timer interrupt. That is now done in the interrupt controller code proper. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: map ColdFire interrupts to correct masking bitsGreg Ungerer2009-09-166-33/+74
| | | | | | | | | The older simple ColdFire interrupt controller has no one-to-one mapping of interrupt numbers to bits in the interrupt mask register. Create a mapping array that each ColdFire CPU type can populate with its available interrupts and the bits that each use in the interrupt mask register. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: clean up ColdFire 532x CPU timer setupGreg Ungerer2009-09-161-16/+1
| | | | | | | | | The newer ColdFire 532x family of CPU's uses the old timer, but has a newer interrupt controller. It doesn't need the special timer setup that was required when using the older interrupt controller. Remove the dead timer irq and level setting code, and define the hard coded vector. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: simplify ColdFire "timers" clock initializationGreg Ungerer2009-09-167-121/+68
| | | | | | | | | The ColdFire "timers" clock setup can be simplified. There is really no need for the flexible per-platform setup code. The clock interrupt can be hard defined per CPU platform (in CPU include files). This makes the actual timer code simpler. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: support code to mask external interrupts on old ColdFire CPU'sGreg Ungerer2009-09-161-0/+4
| | | | | | | | The external interrupts used on the old Coldfire parts with the old style interrupt controller can be properly mask/unmasked in the interrupt handling code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: merge old ColdFire interrupt controller masking macrosGreg Ungerer2009-09-166-34/+83
| | | | | | | | | | Currently the code that supports setting the old style ColdFire interrupt controller mask registers is macros in the include files of each of the CPU types. Merge all these into a set of real masking functions in the old Coldfire interrupt controller code proper. All the macros are basically the same (excepting a register size difference on really early parts). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: remove duplicate ColdFire mcf_autovector() codeGreg Ungerer2009-09-167-83/+27
| | | | | | | | | Each of the ColdFire CPU platform code that used the old style interrupt controller had its own copy of the mcf_autovector() function. They are all the same, remove them all and create a single function in the common coldfire/intc.c code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: mask off all interrupts in ColdFire intc-simr controllerGreg Ungerer2009-09-161-0/+5
| | | | | | | | The ColdFire intc-simr interrupt controller should mask off all interrupt sources at init time. Doing it here instead of separately in each platform setup. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: remove timer device interrupt setup for ColdFire 532xGreg Ungerer2009-09-161-14/+0
| | | | | | | | With fully implemented interrupt controller code we don't need to do the custom interrupt setup for the timer device of the ColdFire 532x. Remove that code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: remove interrupt masking from ColdFire pit timerGreg Ungerer2009-09-161-8/+0
| | | | | | | | With proper interrupt controller code in place there is no need for devices like the timers to have custom interrupt masking code. Remove it (and the defines that go along with it). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: remove unecessary interrupt level setting in ColdFire 520x setupGreg Ungerer2009-09-161-9/+0
| | | | | | | | | The new code for the interrupt controller in the ColdFire 520x takes care of all the interrupt controller setup. No manual config of the level registers (ICR) is required by the platform device setup code. So remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: complete interrupt controller code for the 68360 CPUGreg Ungerer2009-09-161-15/+29
| | | | | | | | Define the interrupt controller structures along with the interrupt controller code for the 68360 CPU. This brings the interrupt setup and control into one place for this CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: complete interrupt controller code for the 68328 CPU'sGreg Ungerer2009-09-161-32/+40
| | | | | | | | Define the interrupt controller structures along with the interrupt controller code for the 68328 CPU family. This brings the interrupt setup and control into one place for this CPU family. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: use common interrupt controller code for older ColdFire CPU'sGreg Ungerer2009-09-163-25/+62
| | | | | | | | | The old ColdFire CPU's (5206, 5307, 5407, 5249 etc) use a simple interrupt controller. Use common setup code for them. This addition means that all ColdFire CPU's now have some specific type of interrupt controller code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: clean up ColdFire 532x interrupt setupGreg Ungerer2009-09-161-18/+0
| | | | | | | | With the common intc-simr interrupt controller code in place the ColdFire 532x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: general interrupt controller for ColdFire 532x partsGreg Ungerer2009-09-162-7/+19
| | | | | | | | | The ColdFire 532x family of parts uses 2 of the same INTC interrupt controlers used in the ColdFire 520x family. So modify the code to support both parts. The extra code for the second INTC controler in the case of the 520x is easily optimized away to nothing. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
* m68knommu: clean up ColdFire 523x interrupt setupGreg Ungerer2009-09-161-63/+0
| | | | | | | | With the common intc-2 interrupt controller code in place the ColdFire 523x family startup code can be greatly simplified. Remove all the interrupt masking code, and the per-device interrupt config here. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
OpenPOWER on IntegriCloud