summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* ARM: tegra: more regulator fixes for HarmonyStephen Warren2012-08-091-15/+17
| | | | | | | | | | | | | | | | | | | | | | | Commit 3d55c29 "ARM: tegra: harmony: add regulator supply name and its input supply" was supposed to fix all the problems with regulators on Harmony. However, it appears that I only tested it when booting using board files, not when booting using device tree. This change fixes two problems with regulators when booting using device tree: 1) That patch only created the vdd_sys regulator when booting using a board file. Since this is the root of the whole regulator tree, this caused no regulators to successfully initialize when booting using device tree. The registration of vdd_sys is moved to fix this. 2) When booting use DT, the regulator core sets has_full_constraints, which in turn causes the core to turn off any regulators not marked as always on. Some of the affected regulators are required for basic system operation. To solve this, add always on constraints to all relevant regulators. This doesn't affect booting using a board file since nothing sets has_full_constraints in that case. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesArnd Bergmann2012-08-073-5/+7
|\ | | | | | | | | | | | | | | | | ARM i.MX fixes for 3.6-rc * tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: i.MX27: Fix emma-prp and csi clocks. ARM: clk-imx31: Fix the keypad clock name ARM: dts: imx27-3ds.dts: Fix serial console node
| * i.MX27: Fix emma-prp and csi clocks.Javier Martin2012-08-071-3/+5
| | | | | | | | | | | | | | Naming of emma-prp related clocks for the i.MX27 is not correct. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * ARM: clk-imx31: Fix the keypad clock nameFabio Estevam2012-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix the keypad clock name, in order to fix the following error: imx-keypad imx-keypad: failed to get keypad clock imx-keypad: probe of imx-keypad failed with error -2 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: stable@vger.kernel.org
| * ARM: dts: imx27-3ds.dts: Fix serial console nodeFabio Estevam2012-08-021-1/+1
| | | | | | | | | | | | | | Fix serial console node and allow the board to boot again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: kirkwood: fix typo in Makefile.bootSebastian Hesselbarth2012-08-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Just a small typo fix to make lsxl dtbs compile Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | ARM: integrator: use clk_prepare_enable() for timerLinus Walleij2012-08-061-1/+1
| | | | | | | | | | | | | | | | The Integrator timer is using the clock framework to get the timer frequency, but missed to prepare the clock before enabling. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | Merge branch 'mxs/fixes-for-3.6' of ↵Arnd Bergmann2012-08-065-72/+64
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/shawnguo/linux-2.6 into fixes * 'mxs/fixes-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: always build ocotp ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfig ARM: mx28: Fix registers range ARM: mx23: Fix registers range
| * | ARM: mxs: always build ocotpMarc Kleine-Budde2012-08-042-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch ocotp support will always be build into the kernel on mxs. Otherwise a DT-only kernel fails to link with: arch/arm/mach-mxs/mach-mxs.c:169: undefined reference to `mxs_get_ocotp' Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: mxs: Remove MMAP_MIN_ADDR setting from mxs_defconfigMarek Vasut2012-08-041-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_DEFAULT_MMAP_MIN_ADDR was set to 65536 in mxs_defconfig, this caused severe breakage of userland applications since the upper limit for ARM is 32768. By default CONFIG_DEFAULT_MMAP_MIN_ADDR is set to 4096 and can also be changed via /proc/sys/vm/mmap_min_addr if needed. Quoting Russell King [1]: "4096 is also fine for ARM too. There's not much point in having defconfigs change it - that would just be pure noise in the config files." the CONFIG_DEFAULT_MMAP_MIN_ADDR can be removed from the defconfig altogether. This problem was introduced by commit cde7c41 (ARM: configs: add defconfig for mach-mxs). [1] http://marc.info/?l=linux-arm-kernel&m=134401593807820&w=2 Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: mx28: Fix registers rangeFabio Estevam2012-08-031-37/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix registers range. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: mx23: Fix registers rangeFabio Estevam2012-08-031-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix registers range. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | | ARM: dts: imx: fix gpio interrupts propertyShawn Guo2012-08-032-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 88cde8b (ARM: dts: imx: update #interrupt-cells for gpio nodes) changes gpio #interrupt-cells from 1 to 2 without updating the users. It causes the gpio irq requesting call failing in client driver's probe function. Add the irq type cell for those gpio interrupt users to fix their driver probe failure. Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | | ARM: dts: imx53-ard: add regulators for lan9220Shawn Guo2012-08-031-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit c7e963f (net/smsc911x: Add regulator support), the lan9220 device tree probe fails on imx53-ard board, because the commit makes VDD33A and VDDVARIO supplies mandatory for the driver. Add a fixed dummy 3V3 supplying lan9220 to fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | | ARM: imx: enable emi_slow_gate clock for imx5Shawn Guo2012-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The imx5 common clock migration causes a regression with smsc911x driver on imx53-ard board, where a smsc lan9220 controller gets connected on imx53 with EIM interface. EIM needs clock emi_slow_gate to be functional. In the new imx5 clock driver, there is no use count incremented for the clock by enabling it, so the framework closes the clock at late init time and makes EIM stop working then. Enable emi_slow_gate in clock driver initialization to fix the regression. Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | ARM: imx6q-sabrelite: Setup CLKO IOMUXFabio Estevam2012-08-031-0/+1
|/ / | | | | | | | | | | | | | | | | In order to have audio functional on mx6qsabrelite, it is necessary to setup the IOMUX for MX6Q_PAD_GPIO_0__CCM_CLKO pins as it provides the audio clock. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-08-0237-556/+1277
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
| * \ Merge branch 'marvell/dt' into late2/dtOlof Johansson2012-07-2938-581/+1342
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * marvell/dt: (41 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ...
| | * | ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn2012-07-276-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.Andrew Lunn2012-07-272-84/+50
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
| | * | ARM: Kirkwood: Describe Dreamplug LEDs in DT.Andrew Lunn2012-07-272-34/+16
| | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe iConnects LEDs in DT.Andrew Lunn2012-07-272-46/+34
| | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe iConnects temperature sensor in DT.Andrew Lunn2012-07-272-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have I2C support in DT, describe the LM63 in the DT file for the iConnect. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe IB62x0 LEDs in DT.Andrew Lunn2012-07-272-36/+17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.Andrew Lunn2012-07-272-31/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the GPIO controllers have been converted over to DT, described the gpio-keys in DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: Kirkwood: Describe DNS32? gpio-keys in DT.Jamie Lentin2012-07-272-37/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move description of GPIO keys on both the DNS320 and DNS325 into DT. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsiJamie Lentin2012-07-273-82/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot of device setup is shared between DNS-320 and DNS-325, move the definitions into a common include. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindingsJamie Lentin2012-07-273-90/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace code in board-dnskw with the equivalent devicetree bindings. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe DNS325 temperature sensor in DT.Andrew Lunn2012-07-272-13/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have I2C support in DT, describe the LM75 in the DT file for the DNS325. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
| | * | ARM: Kirkwood: Use DT to configure SATA device.Andrew Lunn2012-07-279-20/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: kirkwood: use devicetree for SPI on dreamplugMichael Walle2012-07-272-41/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the device tree for the SPI driver and partition layout. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: kirkwood: Add LS-XHL and LS-CHLv2 supportMichael Walle2012-07-279-0/+291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex NetJosh Coombs2012-07-277-0/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Add basic device tree support for QNAP TS219.Andrew Lunn2012-07-279-0/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
| | * | ATA: sata_mv: Add device tree supportAndrew Lunn2012-07-272-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
| | * | ARM: Orion: DTify the watchdog timer.Andrew Lunn2012-07-272-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: Orion: Add arch support needed for I2C via DT.Andrew Lunn2012-07-274-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
| | * | ARM: kirkwood: use devicetree for orion-spiMichael Walle2012-07-272-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
| | * | ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn2012-07-2711-132/+264
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
* | | | Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-08-023-47/+103
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc cpuidle enablement for OMAP from Olof Johansson: "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but didn't go in because the pull request ended up rejected. So it just got merged, and we got this staged branch that enables the coupled cpuidle code on OMAP. With a stable git workflow from the other maintainer we could have staged this earlier, but that wasn't the case so we have had to merge it late. The alternative is to hold it off until 3.7 but given that the code is well-isolated to OMAP and they are eager to see it go in, I didn't push back hard in that direction." * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
| * | | | ARM: OMAP4: CPUidle: Open broadcast clock-event device.Santosh Shilimkar2012-07-251-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP4 idle driver uses CLOCK_EVT_NOTIFY_BROADCAST_[ENTER/EXIT] for broadcast clock events. But _ENTER/_EXIT doesn't really open broadcast clock events and to explicitly setup the broadcast device, CLOCK_EVT_NOTIFY_BROADCAST_ON should be used. Add the missing CLOCK_EVT_NOTIFY_BROADCAST_ON clockevent notifications. This will setup the broadcast timer in either periodic/oneshot modes correctly. Recent clockevent infrastructure change 77b0d60 {leave the broadcast device in shutdown mode when not needed} exposed this bug leading to boot hangs in oneshot mode. Prior to this, periodic broadcast mode was also broken. This change fixes both the periodic/oneshot broadcast modes. Discussion thread : https://lkml.org/lkml/2012/4/9/13 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | | | ARM: OMAP4: CPUidle: add synchronization for coupled idle statesKevin Hilman2012-07-251-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With coupled idle states, a failure for any CPU to hit a low power state must be coordinated such that all CPUs abort. On OMAP4, when entering a coupled state, CPU0 has to wait for CPU1 to enter its low power state before it can enter its low power state. This is implemented by letting CPU0 wait for the CPU1 powerdomain to hit off. However, there are conditions where CPU1 might abort/fail and not hit off while CPU0 is waiting for it. For example, a CPU1 wakeup or a failed attempt to hit off due to hardware conditions. To avoid the deadlock where CPU0 would continually wait for CPU1 to hit off-mode, this patch adds a flag to signal when each CPU has come out of its low-power state. CPU0 then checks whether CPU1 has hit off *or* has already completed its attempt to hit off. If the latter, CPU0 must abort its attempt to hit a low-power state so the coupled state enter method can return. In addition, cpuidle_coupled_parallel_barrier() is used to ensure the clearing of the 'done' flag is synchronized on all CPUs. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | | | ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.Santosh Shilimkar2012-07-252-46/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP4 CPUDILE driver is converted mainly based on notes from the coupled cpuidle patch series. The changes include : - Register both CPUs and C-states to cpuidle driver. - Set struct cpuidle_device.coupled_cpus - Set struct cpuidle_device.safe_state to non coupled state. - Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each state that affects multiple cpus. - Separate ->enter hooks for coupled & simple idle. - CPU0 wait loop for CPU1 power transition. - CPU1 wakeup mechanism for the idle exit. - Enabling ARCH_NEEDS_CPU_IDLE_COUPLED for OMAP4. Thanks to Kevin Hilman and Colin Cross on the suggestions/fixes on the intermediate version of this patch. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | | | ARM: OMAP: timer: allow gp timer clock-event to be used on both cpusSantosh Shilimkar2012-07-251-1/+3
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For coupled cpuidle to work when both cpus are active, it needs a global timer that can handle events for both cpus. This timer is used as the broadcast clock-event when the per-cpu timer hardware stop in low power states. Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and set the irq to allow the clockevent core to determine the affinity of the timer. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-08-024-4/+6
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for merge window fallout, and a bugfix for timer resume on PRIMA2." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: add missing irqs.h arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes ARM: mxc: Include missing irqs.h header
| * | | ARM: mmp: add missing irqs.hHaojian Zhuang2012-08-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 Include <mach/irqs.h> to fix this issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | arm: mvebu: fix typo in .dtsi comment for Armada XP SoCsThomas Petazzoni2012-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumesBarry Song2012-08-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: mxc: Include missing irqs.h headerFabio Estevam2012-07-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include irqs.h in order to fix the following build error: arch/arm/plat-mxc/tzic.c:195:11: error: 'FIQ_START' undeclared (first use in this function) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2012-08-0114-144/+13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
OpenPOWER on IntegriCloud