summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-mxc
Commit message (Collapse)AuthorAgeFilesLines
* iMX: Fix build for iMX53Arnaud Patard (Rtp)2011-08-081-0/+8
| | | | | | | | | | Commit fad107086d5a869c1c07e5bb35b7b57a10ecf578 fixed the wrong test for MX51 as the MX51 addresses are wrong for MX50 and MX53 but now it's MX51 only, UART_PADDR is not defined anymore when building for MX50/MX53. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-by: Steev Klimaszewski <steev@genesi-usa.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge commit 'v3.1-rc1' into imx-fixesSascha Hauer2011-08-0843-933/+348
|\
| * dmaengine: imx-sdma: use platform_device_id to identify sdma versionShawn Guo2011-07-274-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It might be not good to use software defined version to identify sdma device type, when hardware does not define such version. Instead, soc name is stable enough to define the device type. The patch uses platform_device_id rather than version number passed by platform data to identify sdma device type/version. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com>
| * mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()Shawn Guo2011-07-272-8/+10
| | | | | | | | | | | | | | | | | | | | | | The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the esdhc differences among SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Chris Ball <cjb@laptop.org>
| * mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5Shawn Guo2011-07-272-4/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch extends card_detect and write_protect support to get mx5 family and more scenarios supported. The changes include: * Turn platform_data from optional to mandatory * Add cd_types and wp_types into platform_data to cover more use cases * Remove the use of flag ESDHC_FLAG_GPIO_FOR_CD * Adjust some machine codes to adopt the platform_data changes * Work around the issue that software reset will get card detection circuit stop working With this patch, card_detect and write_protect gets supported on mx5 based platforms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Chris Ball <cjb@laptop.org>
| * net/fec: gasket needs to be enabled for some i.mxShawn Guo2011-07-272-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the recent i.mx (mx25/50/53), there is a gasket inside fec controller which needs to be enabled no matter phy works in MII or RMII mode. The current code enables the gasket only when phy interface is RMII. It's broken when the driver works with a MII phy. The patch uses platform_device_id to distinguish the SoCs that have the gasket and enables it on these SoCs for both MII and RMII mode. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reported-by: Troy Kisky <troy.kisky@boundarydevices.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: David S. Miller <davem@davemloft.net>
| * serial/imx: get rid of the uses of cpu_is_mx1()Shawn Guo2011-07-271-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch removes all the uses of cpu_is_mx1(). Instead, it uses the .id_table of platform_driver to distinguish the uart device type, IMX1_UART and IMX21_UART. The IMX21_UART type runs on all i.mx except i.mx1. A couple of !cpu_is_mx1 logic gets turned into is_imx21_uart, as the codes wrapped there are really IMX21 type uart specific. It also removes macro MX1_UCR3_REF25 and MX1_UCR3_REF30 which are not used anywhere. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * Merge branch 'next/devel' of ↵Linus Torvalds2011-07-2612-290/+101
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits) ARM: S5P64X0: External Interrupt Support ARM: EXYNOS4: Enable MFC on Samsung NURI ARM: EXYNOS4: Enable MFC on universal_c210 ARM: S5PV210: Enable MFC on Goni ARM: S5P: Add support for MFC device ARM: EXYNOS4: Add support FIMD on SMDKC210 ARM: EXYNOS4: Add platform device and helper functions for FIMD ARM: EXYNOS4: Add resource definition for FIMD ARM: EXYNOS4: Change devname for FIMD clkdev ARM: SAMSUNG: Add IRQ_I2S0 definition ARM: SAMSUNG: Add platform device for idma ARM: EXYNOS4: Add more registers to be saved and restored for PM ARM: EXYNOS4: Add more register addresses of CMU ARM: EXYNOS4: Add platform device for dwmci driver ARM: EXYNOS4: configure rtc-s3c on NURI ARM: EXYNOS4: configure MAX8903 secondary charger on NURI ARM: EXYNOS4: configure ADC on NURI ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs ... Fix up tons of silly conflicts: - arch/arm/mach-davinci/include/mach/psc.h - arch/arm/mach-exynos4/Kconfig - arch/arm/mach-exynos4/mach-smdkc210.c - arch/arm/mach-exynos4/pm.c - arch/arm/mach-imx/mm-imx1.c - arch/arm/mach-imx/mm-imx21.c - arch/arm/mach-imx/mm-imx25.c - arch/arm/mach-imx/mm-imx27.c - arch/arm/mach-imx/mm-imx31.c - arch/arm/mach-imx/mm-imx35.c - arch/arm/mach-mx5/mm.c - arch/arm/mach-s5pv210/mach-goni.c - arch/arm/mm/Kconfig
| | * ARM: mx53: Add keypad supportFabio Estevam2011-07-071-0/+5
| | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM: mx53: Add SSI suportFabio Estevam2011-07-072-12/+22
| | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM: mx53: Add support for missing UARTsFabio Estevam2011-07-072-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | MX53 has five UART ports. Add support for the missing UART4 and UART5 ports. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * dmaengine: imx-sdma: pass sdma firmware name via platform dataShawn Guo2011-07-071-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not good to have cpu_name and to_version encoded into sdma firmware name as variables. For example, there are three TOs of imx51 soc, the sdma script never changes since TO1, which means all three TOs of imx51 uses TO1 version of sdma script. But we have to prepare three identical firmwares, sdma-imx51-to1.bin sdma-imx51-to2.bin and sdma-imx51-to3.bin, to have the kernel capable of running on all three TOs. The patch removes cpu_name and to_version from sdma platform data, and instead uses fw_name to pass the firmware name, so that we can pass the TO version where it's relevant and skip it where only one firmware exists. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM: mxc: clean up imx-dma device registrationShawn Guo2011-07-073-220/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch follows the implementation of gpio-mxc device registration to break the concentrated imx-dma device registration into soc specific setup function. Then we can avoid the churn of "#ifdef" and the cpu_is_mx checking on such a long list, which makes no sense, considering more soc supports need to be added and we need to support single image for multiple socs in the long run. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM:mx53: Add I2C3 supportAndre Silva2011-07-071-1/+2
| | | | | | | | | | | | | | | Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM: mx53: Add SDMA support for MX53Fabio Estevam2011-07-071-0/+28
| | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM: mach-mx5/mx53_ard: Add support for i.MX53 ARD boardAndre Silva2011-07-071-0/+1
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andre Silva <andre.silva@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * ARM: mxc: convert tzic to use generic irq chipShawn Guo2011-07-072-79/+31
| | | | | | | | | | | | | | | | | | | | | | | | The patch converts mxc tzic interrupt controller to use generic irq chip. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * Merge remote-tracking branch 'grant/gpio/next-mx' into devel-featuresSascha Hauer2011-07-078-390/+58
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-imx/mach-mx31_3ds.c arch/arm/mach-imx/mach-scb9328.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | \ Merge branch 'next/cross-platform' of ↵Linus Torvalds2011-07-261-7/+0
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cross-platform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: Consolidate the clkdev header files ARM: set vga memory base at run-time ARM: convert PCI defines to variables ARM: pci: make pcibios_assign_all_busses use pci_has_flag ARM: remove unnecessary mach/hardware.h includes pci: move microblaze and powerpc pci flag functions into asm-generic powerpc: rename ppc_pci_*_flags to pci_*_flags Fix up conflicts in arch/microblaze/include/asm/pci-bridge.h
| | * | | ARM: Consolidate the clkdev header filesKyungmin Park2011-07-191-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now most of ARM machines has the alsmot same __clk_get/put() macro So place it at the arch/arm/include/asm/clkdev.h and remove the reduntant header files But some machines don't have the same form as above. It can use the machince specific clkdev file by HAVE_MACH_CLKDEV config Now there are only 3 caese. 1) define the clk structure with clkdev macro => Need to move clk structure to proper header file arch/arm/mach-versatile/include/mach/clkdev.h arch/arm/mach-realview/include/mach/clkdev.h arch/arm/mach-vexpress/include/mach/clkdev.h arch/arm/mach-integrator/include/mach/clkdev.h 2) export the __clk_get/put function at clock.c arch/arm/mach-shmobile/include/mach/clkdev.h 3) demuxing the clk source arch/arm/mach-u300/include/mach/clkdev.h Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * | | | Merge branch 'next/cleanup' of ↵Linus Torvalds2011-07-259-82/+30
| |\ \ \ \ | | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits) ARM: EXYNOS4: Change devname for FIMD clkdev ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210 ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100 ARM: S3C24XX: Use generic s3c_set_platdata for devices ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND ARM: SAMSUNG: Use generic s3c_set_platdata for NAND ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON ARM: SAMSUNG: Use generic s3c_set_platdata for FB ARM: SAMSUNG: Use generic s3c_set_platdata for TS ARM: S3C64XX: Add PWM backlight support on SMDK6410 ARM: S5P64X0: Add PWM backlight support on SMDK6450 ARM: S5P64X0: Add PWM backlight support on SMDK6440 ARM: S5PC100: Add PWM backlight support on SMDKC100 ARM: S5PV210: Add PWM backlight support on SMDKV210 ARM: EXYNOS4: Add PWM backlight support on SMDKC210 ARM: EXYNOS4: Add PWM backlight support on SMDKV310 ARM: SAMSUNG: Create a common infrastructure for PWM backlight support clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0 ... Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
| | * | | ARM i.MX debug macro: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer2011-07-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | plat-mxc/pwm.c: use resource_size()H Hartley Sweeten2011-07-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM i.MX: get rid of wrong MXC_INTERNAL_IRQ usageSascha Hauer2011-07-071-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several occurences where MXC_INTERNAL_IRQ is assumed to be the start of the gpio interrupts. It was never meant this way. Replace these with gpio_to_irq. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | ARM i.MX avic: do not depend on MXC_INTERNAL_IRQSSascha Hauer2011-07-071-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This becomes meaningless in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM i.MX tzic: do not depend on MXC_INTERNAL_IRQSSascha Hauer2011-07-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This becomes meaningless in subsequent patches. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM i.MX mxc.h: use CONFIG_SOC_* instead of CONFIG_ARCH_*Sascha Hauer2011-07-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ARCH_* are deprecated, so remove one user. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM i.MX: remove SoC defines around header includesSascha Hauer2011-07-071-23/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All soc specific header have proper namespace now and thus can be included at once. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM i.MX: define CLOCK_TICK_RATE to bogus valueSascha Hauer2011-07-071-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a clocksource which renders CLOCK_TICK_RATE useless. Define it to a bogus value to get rid of some ifdeffery. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM i.MX: fix last user of iomux.h and remove itSascha Hauer2011-07-071-26/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | | Merge branch 'next/fixes' of ↵Linus Torvalds2011-07-258-121/+88
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (35 commits) ARM: msm: platsmp: determine number of CPU cores at boot time ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461 ARM: Tegra: Trimslice: Tri-state DAP3 pinmux ARM: orion5x: fixup 5181 MPP mask check ARM: mxs-dma: include <linux/dmaengine.h> ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts ARM: i.MX53: UARTn_CTS pin should not change RTS input select ARM: i.MX53: UARTn_TXD pin should not change RXD input select ARM: mx25: Fix typo on CAN1_RX pad setting iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed ARM: i.MX53: Fix IOMUX type o's ARM i.MX dma: Fix burstsize settings mach-mx5: fix the I2C clock parents ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0 ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h ARM: mx53: Fix some interrupts marked as reserved. MXC: iomux-v3: correct NO_PAD_CTRL definition ... Fix up trivial conflict in arch/arm/mach-imx/mach-mx31_3ds.c
| | * \ \ \ Merge branch 'fixes-for-arnd' of git://git.pengutronix.de/git/imx/linux-2.6 ↵Arnd Bergmann2011-07-152-58/+58
| | |\ \ \ \ | | | |/ / / | | |/| | | | | | | | | into imx/fixes
| | | * | | ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/ctsTroy Kisky2011-07-151-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * | | ARM: i.MX53: UARTn_CTS pin should not change RTS input selectTroy Kisky2011-07-151-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If both the RTS pad and CTS pad definitions setup IOMUXC_UARTn_IPP_UART_RTS_MUX_SELECT_INPUT, then the order of setup will matter. We don't want that. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * | | ARM: i.MX53: UARTn_TXD pin should not change RXD input selectTroy Kisky2011-07-151-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If both the RXD pad and TXD pad definitions setup IOMUXC_UARTn_IPP_UART_RXD_MUX_SELECT_INPUT, then the order of setup will matter. We don't want that. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * | | ARM: mx25: Fix typo on CAN1_RX pad settingFabio Estevam2011-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | | * | | iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitionsLothar Waßmann2011-07-151-6/+6
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C controller requires the SION bit to be set on SDA and SCL pins. This is missing on some pad definitions for the I2C function. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: i.MX53: Fix IOMUX type o'sTroy Kisky2011-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ", o" was used for ", 0" ", 17" was used for ", 7 | 0x10" Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mx53: Fix some interrupts marked as reserved.Fabio Estevam2011-07-071-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark the actual interrupt source for some interrupts currently marked as reserved. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | MXC: iomux-v3: correct NO_PAD_CTRL definitionTroy Kisky2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iomux-v3.c uses NO_PAD_CTRL as a 32 bit value so it should not be shifted left by MUX_PAD_CTRL_SHIFT(41) Previously, anything requesting NO_PAD_CTRL would get their pad control register set to 0. Since it is a pad control mask, place it with the other mask values. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mx51: Fix the address space length for SSIFabio Estevam2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On MX51 the address space length for SSI is 16KB. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mxc: imx-dma on imx25 has no other TO version but TO1Shawn Guo2011-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The imx25 sdma script only gets TO1 version, so there is no need to encode "to1" in the variable name. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mxc: change imx-dma default to_version to 1Shawn Guo2011-07-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value 0 is not a valid TO version number. With the current code, imx-sdma driver will try to load firmware sdma-imx25-to0.bin, which is obviously not a good name. Instead, sdma-imx25-to1.bin makes much more sense. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mxc: sdma on imx25 is a V2 blockShawn Guo2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sdma on soc imx25 is not a V1 but V2 block. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mxc: imx-sdma device gets 16K iosize than 4KShawn Guo2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sdma on all imx soc gets 16K IO space not 4K. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mxc: iomux-v1: Fix build warningFabio Estevam2011-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the following warning: CC arch/arm/plat-mxc/iomux-v1.o arch/arm/plat-mxc/iomux-v1.c: In function 'mxc_gpio_setup_multiple_pins': arch/arm/plat-mxc/iomux-v1.c:160: warning: 'ret' may be used uninitialized in this function arch/arm/plat-mxc/iomux-v1.c:160: note: 'ret' was declared here Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIOFabio Estevam2011-07-072-33/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting the IOMUX of multiple pins via mxc_gpio_setup_multiple_pins, gpio_request is called and this prevents subsequent calls of gpio_request done by drivers to succeed. Remove gpio_request call from mxc_gpio_setup_multiple_pins function. As gpio_request is removed from mxc_gpio_setup_multiple_pins, there is no need to have mxc_gpio_release_multiple_pins anymore, so remove this function. Tested on a mx27_3ds board and after applying this patch it is possible to define all the IOMUX setup in a static array Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mx53: Fix the base addresses for the DDR memory regionsMarc Kleine-Budde2011-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mx53: Fix the chip select addressesFabio Estevam2011-07-071-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MX53 has 4 chip selects (CS0 - CS3) and the valid combinations are: - CS0 (128MB) - CS0 (64MB), CS1 (64MB) - CS0 (64MB), CS1 (32MB), CS2 (32MB) - CS0 (32MB), CS1 (32MB), CS2 (32MB) , CS3 (32MB) Fix these addresses and also take into account all the four possibilities. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| | * | | ARM: mx53: Fix alternate modes for MX53_PAD_PATA_DATA6Fabio Estevam2011-07-071-5/+5
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MX53_PAD_PATA_DATA6 can have the following alternate modes: PATA_DATA_6: mode 0 GPIO2_6: mode 1 EMI_NANDF_D_6: mode 3 ESDHC4_DAT6 mode 4 GPU3d_GPU_DEBUG_OUT_6 mode 5 IPU_DIAG_BUS_6 mode 6 Fix the modes accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dinh Nguyen <dinh.nguyen@freescale.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OpenPOWER on IntegriCloud