summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2014-11-151-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM fixes from Russell King: "Two fixes this time, one to ensure that the kuser helper option depends on MMU as they aren't available for noMMU targets (and if the option is selected, we end up oopsing.) The second fix plugs a corner case with the decompressor, ensuring that the instruction stream can see the relocated code in every case on ARMv7 CPUs" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8198/1: make kuser helpers depend on MMU ARM: 8191/1: decompressor: ensure I-side picks up relocated code
| * ARM: 8198/1: make kuser helpers depend on MMUNathan Lynch2014-11-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f5f41 (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Reported-by: Stefan Agner <stefan@agner.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2014-11-023-9/+21
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM fixes from Russell King: - add the new bpf syscall to ARM. - drop a redundant return statement in __iommu_alloc_remap() - fix a performance issue noticed by Thomas Petazzoni with kmap_atomic(). - fix an issue with the L2 cache OF parsing code which caused it to incorrectly print warnings on each boot, and make the warning text more consistent with the rest of the code * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn() ARM: 8183/1: l2c: Improve l2c310_of_parse() error message ARM: 8181/1: Drop extra return statement ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int' ARM: enable bpf syscall
| * ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn()Thomas Petazzoni2014-10-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since CONFIG_HIGHMEM got enabled on ARMv5 Kirkwood, we have noticed a very significant drop in networking performance. The test were conducted on an OpenBlocks A7 board. Without this patch, the outgoing performance measured with iperf are: - highmem OFF, TSO OFF 544 Mbit/s - highmem OFF, TSO ON 942 Mbit/s - highmem ON, TSO OFF 306 Mbit/s - highmem ON, TSO ON 246 Mbit/s On this Kirkwood platform, the L2 cache is a Feroceon cache, and with this cache, all the range operations have to be done on virtual addresses and not physical addresses. Therefore, whenever CONFIG_HIGHMEM is enabled, the cache maintenance operations call kmap_atomic_pfn() and kunmap_atomic(). However, kmap_atomic_pfn() does not implement the same fast path for non-highmem pages as the one implemented in kmap_atomic(), and this is one of the reason for the performance drop. While this patch does not fully restore the performances, it clearly improves them a lot: without patch with patch - highmem ON, TSO OFF 306 Mbit/s 387 Mbit/s - highmem ON, TSO ON 246 Mbit/s 434 Mbit/s We're still far from the !CONFIG_HIGHMEM performances, but it does improve a bit the situation. Thanks a lot to Ezequiel Garcia and Gregory Clement for all the testing work around this topic. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 8183/1: l2c: Improve l2c310_of_parse() error messageFabio Estevam2014-10-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Russell King suggested [1]: "I'd ask for one change. Please make all these messages start with "L2C-310 OF" not "PL310 OF:". The device is described in ARM documentation as a L2C-310 not PL310. (Also note the : is dropped too - most of the other messages don't have the : either.) The: "PL310 OF: cache setting yield illegal associativity PL310 OF: -1073346556 calculated, only 8 and 16 legal" message could also be changed to something like: "L2C-310 OF cache associativity %d invalid, only 8 or 16 permittedn" [1] http://www.spinics.net/lists/arm-kernel/msg372776.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 8181/1: Drop extra return statementLaura Abbott2014-10-291-1/+0
| | | | | | | | | | | | | | | | | | | | Commit 513510ddba9650fc7da456eefeb0ead7632324f6 (common: dma-mapping: introduce common remapping functions) managed to end up with an extra return statement from the original patch. Drop it. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int'Fabio Estevam2014-10-291-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit f3354ab67476dc80 ("ARM: 8169/1: l2c: parse cache properties from ePAPR definitions") the following error is seen on imx6q: [ 0.000000] PL310 OF: cache setting yield illegal associativity [ 0.000000] PL310 OF: -2147097556 calculated, only 8 and 16 legal As imx6q does not pass the "cache-size" and "cache-sets" properties in DT, the function l2x0_cache_size_of_parse() returns early and keep the 'associativity' pointer uninitialized. To fix this problem, return error codes inside l2x0_cache_size_of_parse() and only use the 'associativity' pointer result if l2x0_cache_size_of_parse() succeeds. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2014-10-281-4/+4
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | Pull ARM fixes from Russell King: "A couple of ARM fixes. We fix some printk formats for ptrdiff_t quantities which cause GCC 4.9 to complain, and we also blacklist known buggy GCC 4.8.x compilers as their miscompilation is serious enough to cause filesystem corruption, even through many distros have fixed their versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix some printk formats ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854
| * ARM: fix some printk formatsRussell King2014-10-211-4/+4
| | | | | | | | | | | | | | | | GCC 4.9 complains if we take the difference of two pointers, and it's printed with "%d". Fix this by using the proper flag - "t" for ptrdiff_t. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge tag 'samsung-fixes' of ↵Olof Johansson2014-10-141-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v3.18" from Kukjin Kim: - fix ifdef around cpu_*_do_[suspend, resume] ops to check CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP - fix exynos_defconfig build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n - fix enabling Samsung PM debug functionality due to recently merged patches and previous merge conflicts - fix pull-up setting in sd4_width8 pin group for exynos4x12 * tag 'samsung-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: SAMSUNG: Restore Samsung PM Debug functionality ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] opsBartlomiej Zolnierkiewicz2014-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ifdef around cpu_\name\()_do_suspend and cpu_\name\()_do_resume ops in proc-macros.S should check for CONFIG_ARM_CPU_SUSPEND and not CONFIG_PM_SLEEP. Fix it. [ Please note that cpu_v7_do_[suspend,resume] code in proc-v7.S already correctly checks for CONFIG_ARM_CPU_SUSPEND, same is true for functions for other architectures. ] This fix is needed for decoupling suspend/resume and advanced cpuidle support on Exynos platform (next patch fixes build for config with CONFIG_PM_SLEEP=n and CONFIG_ARM_EXYNOS_CPUIDLE=y). If this fix is not present then the following OOPS happens on the first attempt to go into advanced cpuidle mode (AFTR): [ 22.244143] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 22.250759] pgd = c0004000 [ 22.253445] [00000000] *pgd=00000000 [ 22.257012] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 22.262906] Modules linked in: [ 22.265949] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-next-20140811-dirty #730 [ 22.273757] task: c05dce68 ti: c05d2000 task.ti: c05d2000 [ 22.279139] PC is at 0x0 [ 22.281661] LR is at __cpu_suspend_save+0x4c/0xa8 [ 22.286344] pc : [<00000000>] lr : [<c00125e0>] psr: a0000093 [ 22.286344] sp : c05d3ef4 ip : c05da414 fp : 00000001 [ 22.297799] r10: c05da414 r9 : c0609cb0 r8 : 0000000f [ 22.303008] r7 : c05da444 r6 : 00000038 r5 : ea802c00 r4 : c05d3f14 [ 22.309517] r3 : 00000000 r2 : c05d3f4c r1 : 00000038 r0 : c05d3f20 [ 22.316029] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 22.323406] Control: 10c5387d Table: 69d5404a DAC: 00000015 [ 22.329135] Process swapper/0 (pid: 0, stack limit = 0xc05d2240) [ 22.335124] Stack: (0xc05d3ef4 to 0xc05d4000) [ 22.339466] 3ee0: ea802c00 00000038 c05d3f4c [ 22.347626] 3f00: 00000000 00000007 c00123bc 00000000 c001d468 6a888000 c05d3f4c 80000000 [ 22.355785] 3f20: 00000007 c003d3a0 0000193d eaf9dde4 eaf9dde4 c02ef0c8 c000969c fffffffe [ 22.363944] 3f40: 00000000 c0037b54 eaf9dbb8 e9d1a380 00000000 c001d468 c0609cb0 00000000 [ 22.372103] 3f60: c0609cb0 c061649e 00000001 c001250c eaf9dbb8 00000001 c0609cb0 c001d618 [ 22.380262] 3f80: c001d5d0 c02ef56c 2d9d2e1e 00000005 eaf9dbb8 c02edcc4 2d9d2e1e 00000005 [ 22.388421] 3fa0: c040446c c05da4ec c040446c eaf9dbb8 c05cfbb0 c004c580 c05dce68 c05b3ae8 [ 22.396580] 3fc0: 00000000 c058bb24 ffffffff ffffffff c058b5e4 00000000 00000000 c05b3ae8 [ 22.404740] 3fe0: c0616994 c05da47c c05b3ae4 c05ddeec 4000406a 40008074 00000000 00000000 [ 22.412909] [<c00125e0>] (__cpu_suspend_save) from [<c00123bc>] (__cpu_suspend+0x5c/0x70) [ 22.421074] [<c00123bc>] (__cpu_suspend) from [<c05d3f4c>] (init_thread_union+0x1f4c/0x2000) [ 22.429479] Code: bad PC value [ 22.432518] ---[ end trace fb90ebf4217d0ad9 ]--- [ 22.437116] Kernel panic - not syncing: Attempted to kill the idle task! [ 22.443800] Rebooting in 5 seconds.. This patch has been tested on Exynos4210 based Origen board. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* | | arm: mm: enable RCU fast_gupSteve Capper2014-10-091-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Activate the RCU fast_gup for ARM. We also need to force THP splits to broadcast an IPI s.t. we block in the fast_gup page walker. As THP splits are comparatively rare, this should not lead to a noticeable performance degradation. Some pre-requisite functions pud_write and pud_page are also added. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Hugh Dickins <hughd@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Will Deacon <will.deacon@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | ARM: mm: don't limit default CMA region only to low memoryMarek Szyprowski2014-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DMA-mapping supports CMA regions places either in low or high memory, so there is no longer needed to limit default CMA regions only to low memory. The real limit is still defined by architecture specific DMA limit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Daniel Drake <drake@endlessm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | arm: use genalloc for the atomic poolLaura Abbott2014-10-091-104/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM currently uses a bitmap for tracking atomic allocations. genalloc already handles this type of memory pool allocation so switch to using that instead. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Riley <davidriley@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Ritesh Harjain <ritesh.harjani@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | common: dma-mapping: introduce common remapping functionsLaura Abbott2014-10-091-48/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For architectures without coherent DMA, memory for DMA may need to be remapped with coherent attributes. Factor out the the remapping code from arm and put it in a common location to reduce code duplication. As part of this, the arm APIs are now migrated away from ioremap_page_range to the common APIs which use map_vm_area for remapping. This should be an equivalent change and using map_vm_area is more correct as ioremap_page_range is intended to bring in io addresses into the cpu space and not regular kernel managed memory. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Riley <davidriley@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Ritesh Harjain <ritesh.harjani@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Mitchel Humpherys <mitchelh@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| | |
| \ \
| \ \
| \ \
*---. \ \ Merge branches 'fiq' (early part), 'fixes', 'l2c' (early part) and 'misc' ↵Russell King2014-10-027-7/+135
|\ \ \ \ \ | | |_|_|/ | |/| | | | | | | | into for-next
| | | * | ARM: 8167/1: extend the reserved memory for initrd to be page alignedYalin Wang2014-10-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the start and end address of initrd to be page aligned, so that we can free all memory including the un-page aligned head or tail page of initrd, if the start or end address of initrd are not page aligned, the page can't be freed by free_initrd_mem() function. Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | ARM: 8152/1: Convert pr_warning to pr_warnJoe Perches2014-09-262-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the more common pr_warn. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * | ARM: 8138/1: drop ISAR0 workaround for B15Brian Norris2014-09-121-1/+1
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Brahma-B15's ISAR0 correcty advertises UDIV/SDIV support in both ARM and Thumb2 modes (CPUID_EXT_ISAR0=02101110), so we don't need to manually apply this hwcap. The code in question actually predates the following commit, which made our hwcaps unnecessary: commit 8164f7af88d9ad3a757bd14f634b23997ee77f6b Author: Stephen Boyd <sboyd@codeaurora.org> Date: Mon Mar 18 19:44:15 2013 +0100 ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | ARM: 8169/1: l2c: parse cache properties from ePAPR definitionsLinus Walleij2014-10-021-0/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When both 'cache-size' and 'cache-sets' are specified for a L2 cache controller node, parse those properties and set up the set size based on which type of L2 cache controller we are using. Update the L2 cache controller Device Tree binding with the optional 'cache-size', 'cache-sets', 'cache-block-size' and 'cache-line-size' properties. These come from the ePAPR specification. Using the cache size, number of sets and cache line size we can calculate desired associativity of the L2 cache. This is done by the calculation: set size = cache size / sets ways = set size / line size way size = cache size / ways = sets * line size associativity = cache size / way size Example output from the PB1176 DT that look like this: L2: l2-cache { compatible = "arm,l220-cache"; (...) arm,override-auxreg; cache-size = <131072>; // 128kB cache-sets = <512>; cache-line-size = <32>; }; Ends up like this: L2C OF: override cache size: 131072 bytes (128KB) L2C OF: override line size: 32 bytes L2C OF: override way size: 16384 bytes (16KB) L2C OF: override associativity: 8 L2C: DT/platform modifies aux control register: 0x02020fff -> 0x02030fff L2C-220 cache controller enabled, 8 ways, 128 kB L2C-220: CACHE_ID 0x41000486, AUX_CTRL 0x06030fff Which is consistent with the value earlier hardcoded for the PB1176 platform. This patch is an extended version based on the initial patch by Florian Fainelli. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: 8165/1: alignment: don't break misaligned NEON load/storeRobin Murphy2014-09-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by: Simon Hosie <simon.hosie@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | ARM: 8164/1: mm: clear SCTLR.HA instead of setting it for LPAEWill Deacon2014-09-251-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTLR.HA (hardware access flag) is deprecated and not actually implemented by any CPUs. Furthermore, it can confuse cr_alignment checks where the whole value of SCTLR is compared against the value sitting in the hardware, since the bit is actually RAZ/WI and will not match the saved cr_alignment value. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 8132/1: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSETKonstantin Khlebnikov2014-09-021-1/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM: LPAE: drop wrong carry flag correction after adding TTBR1_OFFSET In commit 7fb00c2fca4b6c58be521eb3676cf4b4ba8dde3b ("ARM: 8114/1: LPAE: load upper bits of early TTBR0/TTBR1") part which fixes carrying in adding TTBR1_OFFSET to TTRR1 was wrong: addls ttbr1, ttbr1, #TTBR1_OFFSET adcls tmp, tmp, #0 addls doesn't update flags, adcls adds carry from cmp above: cmp ttbr1, tmp @ PHYS_OFFSET > PAGE_OFFSET? Condition 'ls' means carry flag is clear or zero flag is set, thus only one case is affected: when PHYS_OFFSET == PAGE_OFFSET. It seems safer to remove this fixup. Bug is here for ages and nobody complained. Let's fix it separately. Reported-and-Tested-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 8128/1: abort: don't clear the exclusive monitorsMark Rutland2014-08-272-12/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors upon entry to the kernel, but this is redundant: - We clear the monitors on every exception return since commit 200b812d0084 ("Clear the exclusive monitor when returning from an exception"), so this is not necessary to ensure the monitors are cleared before returning from a fault handler. - Any dummy STREX will target a temporary scratch area in memory, and may succeed or fail without corrupting useful data. Its status value will not be used. - Any other STREX in the kernel must be preceded by an LDREX, which will initialise the monitors consistently and will not depend on the earlier state of the monitors. Therefore we have no reason to care about the initial state of the exclusive monitors when a data abort is taken, and clearing the monitors prior to exception return (as we already do) is sufficient. This patch removes the redundant clearing of the exclusive monitors from the early abort handlers. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8114/1: LPAE: load upper bits of early TTBR0/TTBR1Konstantin Khlebnikov2014-08-091-4/+3
| | | | | | | | | | | This patch fixes booting when idmap pgd lays above 4gb. Commit 4756dcbfd37 mostly had fixed this, but it'd failed to load upper bits. Also this fixes adding TTBR1_OFFSET to TTRR1: if lower part overflows carry flag must be added to the upper part. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'soc-for-3.17' of ↵Linus Torvalds2014-08-081-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This is the bulk of new SoC enablement and other platform changes for 3.17: - Samsung S5PV210 has been converted to DT and multiplatform - Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms - Kirkwood, one of the popular Marvell platforms, is folded into the mvebu platform code, removing mach-kirkwood - Hwmod data for TI AM43xx and DRA7 platforms - More additions of Renesas shmobile platform support - Removal of plat-samsung contents that can be removed with S5PV210 being multiplatform/DT-enabled and the other two old platforms being removed New platforms (most with only basic support right now): - Hisilicon X5HD2 settop box chipset is introduced - Mediatek MT6589 (mobile chipset) is introduced - Broadcom BCM7xxx settop box chipset is introduced + as usual a lot other pieces all over the platform code" * tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits) ARM: hisi: remove smp from machine descriptor power: reset: move hisilicon reboot code ARM: dts: Add hix5hd2-dkb dts file. ARM: debug: Rename Hi3716 to HIX5HD2 ARM: hisi: enable hix5hd2 SoC ARM: hisi: add ARCH_HISI MAINTAINERS: add entry for Broadcom ARM STB architecture ARM: brcmstb: select GISB arbiter and interrupt drivers ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs ARM: configs: enable SMP in bcm_defconfig ARM: add SMP support for Broadcom mobile SoCs Documentation: arm: misc updates to Marvell EBU SoC status Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC ARM: mvebu: fix build without platforms selected ARM: mvebu: add cpuidle support for Armada 38x ARM: mvebu: add cpuidle support for Armada 370 cpuidle: mvebu: add Armada 38x support cpuidle: mvebu: add Armada 370 support cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7 ARM: mvebu: export the SCU address ...
| * Merge tag 'exynos-cpuidle' of ↵Olof Johansson2014-07-191-1/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Merge "Samsung exynos cpuidle update for v3.17" from Kukjin Kim: - add callbacks exynos_suspend() and exynos_powered_up() for support cpuidle through mcpm - skip exynos_cpuidle for exynos5420 because is uses cpuidle-big-liggle generic cpuidle driver - add generic functions to calculate cpu number is used for pmu and this is required for exynos5420 multi-cluster - add of_device_id structure for big.LITTLE cpuidle and add "samsung,exynos5420" compatible string for exynos5420 * tag 'exynos-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: populate suspend and powered_up callbacks for mcpm ARM: EXYNOS: do not allow cpuidle registration for exynos5420 cpuidle: big.LITTLE: init driver for exynos5420 cpuidle: big.LITTLE: Add ARCH_EXYNOS entry in config ARM: EXYNOS: add generic function to calculate cpu number cpuidle: big.LITTLE: add of_device_id structure + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
| * \ Merge tag 'mvebu-soc-3.17-2' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson2014-07-191-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/soc Merge "ARM: mvebu SoC changes for v3.17 (round 2)" from Jason Cooper: "Yeah, it's just one patch, but it's a beautiful one! Thanks to the efforts of many people over the last couple years, and in particular, Andrew Lunn, Kirkwood has been completely converted to DT." - kirkwood * Remove mach-kirkwood/, It's fully supported in mach-mvebu/ * tag 'mvebu-soc-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: Kirkwood: Remove mach-kirkwood Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: Kirkwood: Remove mach-kirkwoodAndrew Lunn2014-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that all boards have been converted to DT and all the support code lives in mach-mvebu, we can remove mach-kirkwood. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1405028192-9623-2-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | | | CMA: generalize CMA reserved area management functionalityJoonsoo Kim2014-08-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, there are two users on CMA functionality, one is the DMA subsystem and the other is the KVM on powerpc. They have their own code to manage CMA reserved area even if they looks really similar. From my guess, it is caused by some needs on bitmap management. KVM side wants to maintain bitmap not for 1 page, but for more size. Eventually it use bitmap where one bit represents 64 pages. When I implement CMA related patches, I should change those two places to apply my change and it seem to be painful to me. I want to change this situation and reduce future code management overhead through this patch. This change could also help developer who want to use CMA in their new feature development, since they can use CMA easily without copying & pasting this reserved area management code. In previous patches, we have prepared some features to generalize CMA reserved area management and now it's time to do it. This patch moves core functions to mm/cma.c and change DMA APIs to use these functions. There is no functional change in DMA APIs. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Gleb Natapov <gleb@kernel.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge branch 'swp' (early part) into for-nextRussell King2014-08-051-1/+1
|\ \ \ \
| * | | | ARM: SWP emulation: always enable when SMP is enabledRussell King2014-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SWP is deprecated in ARMv6 and ARMv7 CPUs, but more importantly, when running on a SMP system, SWP doesn't guarantee atomicity. This means it can't really be used (by userspace) for locking purposes in a SMP environment. Currently, many configurations leave the SWP emulation disabled, which means we never know if userspace executes this instruction on ARMv7 hardware. Rectify this by enabling SWP emulation for ARMv7 with SMP (where we can trap the instruction.) Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | Merge branches 'fixes' and 'misc' into for-nextRussell King2014-08-0545-398/+505
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/kernel/iwmmxt.S arch/arm/mm/cache-l2x0.c arch/arm/mm/mmu.c
| * | | | | ARM: add comments to the early page table remap codeRussell King2014-08-021-5/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add further comments to the early page table remap code to explain what the code is doing, why it is doing it, but more importantly to explain that the code is not architecturally compliant and is squarely in "UNPREDICTABLE" behaviour territory. Add a warning and tainting of the kernel too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 8110/1: do CPU-specific init for Broadcom Brahma15 coresMarc Carino2014-07-241-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Perform any CPU-specific initialization required on the Broadcom Brahma-15 core. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAESteven Capper2014-07-242-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For LPAE, we have the following means for encoding writable or dirty ptes: L_PTE_DIRTY L_PTE_RDONLY !pte_dirty && !pte_write 0 1 !pte_dirty && pte_write 0 1 pte_dirty && !pte_write 1 1 pte_dirty && pte_write 1 0 So we can't distinguish between writeable clean ptes and read only ptes. This can cause problems with ptes being incorrectly flagged as read only when they are writeable but not dirty. This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58, and adds additional logic to set AP[2] whenever the pte is read only or not dirty. That way we can distinguish between clean writeable ptes and read only ptes. HugeTLB pages will use this new logic automatically. We need to add some logic to Transparent HugePages to ensure that they correctly interpret the revised pgprot permissions (L_PTE_RDONLY has moved and no longer matches PMD_SECT_AP2). In the process of revising THP, the names of the PMD software bits have been prefixed with L_ to make them easier to distinguish from their hardware bit counterparts. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 8103/1: save/restore Cortex-A9 CP15 registers on suspend/resumeShawn Guo2014-07-181-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CP15 diagnostic register holds ARM errata bits on Cortex-A9, so it needs to be saved/restored on suspend/resume. Otherwise, the effectiveness of errata workaround gets lost together with diagnostic register bit across suspend/resume cycle. And the CP15 power control register of Cortex-A9 shares the same problem. The patch adds a couple of Cortex-A9 specific suspend/resume functions to save/restore these two Cortex-A9 CP15 registers across the suspend/resume cycle. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 8090/1: add revision info for PL310 errata 588369 and 727915Shawn Guo2014-07-181-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add revision info for PL310_ERRATA_588369 and PL310_ERRATA_727915 to help people understand if they need to enable the errata for their hardware. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: 8089/1: cpu_pj4b_suspend_size should base on cpu_v7_suspend_sizeShawn Guo2014-07-181-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since pj4b suspend/resume routines are implemented based on generic ARMv7 ones, instead of hard-coding cpu_pj4b_suspend_size, we should have it be cpu_v7_suspend_size plus pj4b specific bytes. Otherwise, if cpu_v7_suspend_size gets updated alone, the pj4b suspend/resume will likely be broken. While at it, fix the comments in cpu_pj4b_do_resume, as we're restoring CP15 registers rather than saving in there. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: alignment: save last kernel aligned fault locationRussell King2014-07-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save and report (via the procfs file) the last kernel unaligned fault location. This allows us to trivially inspect where the last fault happened for cases which we don't expect to occur. Since we expect the kernel to generate misalignment faults (due to the networking layer), even when warnings are enabled, we don't log them for the kernel. Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | | ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+Russell King2014-07-1840-380/+392
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | ARM: make it easier to check the CPU part number correctlyRussell King2014-07-181-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that platform maintainers check the CPU part number in the right manner: the CPU part number is meaningless without also checking the CPU implement(e|o)r (choose your preferred spelling!) Provide an interface which returns both the implementer and part number together, and update the definitions to include the implementer. Mark the old function as being deprecated... indeed, using the old function with the definitions will now always evaluate as false, so people must update their un-merged code to the new function. While this could be avoided by adding new definitions, we'd also have to create new names for them which would be awkward. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | ARM: idmap: add identity mapping usage noteRussell King2014-08-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a note about the usage of the identity mapping; we do not support accesses outside of the identity map region and kernel image while a CPU is using the identity map. This is because the identity mapping may overwrite vmalloc space, IO mappings, the vectors pages, etc. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | ARM: 8115/1: LPAE: reduce damage caused by idmap to virtual memory layoutKonstantin Khlebnikov2014-07-291-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On LPAE, each level 1 (pgd) page table entry maps 1GiB, and the level 2 (pmd) entries map 2MiB. When the identity mapping is created on LPAE, the pgd pointers are copied from the swapper_pg_dir. If we find that we need to modify the contents of a pmd, we allocate a new empty pmd table and insert it into the appropriate 1GB slot, before then filling it with the identity mapping. However, if the 1GB slot covers the kernel lowmem mappings, we obliterate those mappings. When replacing a PMD, first copy the old PMD contents to the new PMD, so that we preserve the existing mappings, particularly the mappings of the kernel itself. [rewrote commit message and added code comment -- rmk] Fixes: ae2de101739c ("ARM: LPAE: Add identity mapping support for the 3-level page table format") Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | ARM: fix alignment of keystone page table fixupRussell King2014-07-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If init_mm.brk is not section aligned, the LPAE fixup code will miss updating the final PMD. Fix this by aligning map_end. Fixes: a77e0c7b2774 ("ARM: mm: Recreate kernel mappings in early_paging_init()") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | ARM: DMA: ensure that old section mappings are flushed from the TLBRussell King2014-07-171-1/+10
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When setting up the CMA region, we must ensure that the old section mappings are flushed from the TLB before replacing them with page tables, otherwise we can suffer from mismatched aliases if the CPU speculatively prefetches from these mappings at an inopportune time. A mismatched alias can occur when the TLB contains a section mapping, but a subsequent prefetch causes it to load a page table mapping, resulting in the possibility of the TLB containing two matching mappings for the same virtual address region. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: l2c: fix revision checkingRussell King2014-07-071-1/+1
|/ / | | | | | | | | | | | | | | | | The revision checking in l2c310_enable() was not correct; we were masking the part number rather than the revision number. Fix this to use the correct macro. Fixes: 4374d64933b1 ("ARM: l2c: add automatic enable of early BRESP") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 8086/1: Set memblock limit for nommuLaura Abbott2014-06-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 8076/1: mm: add support for HW coherent systems in PL310 cacheThomas Petazzoni2014-06-291-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: arm925: ensure assembly sets up writethrough mappingRussell King2014-06-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | Commit ca8f0b0a545f ("ARM: ensure C page table setup code follows assembly code") did what it said on the tin, but some of the older CPU code omitted the default cache policy from their files. This results in the kernel running with the caches disabled. Fix this for ARM925. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud