summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-v7.S
Commit message (Collapse)AuthorAgeFilesLines
*---. Merge branches 'at91', 'ep93xx', 'errata', 'footbridge', 'fncpy', 'gemini', ↵Russell King2011-03-161-30/+98
|\ \ \ | | | | | | | | | | | | 'irqdata', 'pm', 'sh', 'smp', 'spear', 'ux500' and 'via' into devel
| | * | ARM: pm: add generic CPU suspend/resume supportRussell King2011-02-221-30/+86
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6772/1: errata: possible fault MMU translations following an ASID switchWill Deacon2011-03-091-0/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | On the r2p* and r3p* versions of the Cortex-A9, a speculative memory access may cause a page table walk which starts prior to an ASID switch but completes afterwards. This can populate the micro-TLB with a stale entry which may be hit with the new ASID. This workaround places two dsb instructions in the mm switching code so that no page table walks can cross the ASID switch. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of ↵Will Deacon2011-02-191-0/+6
|/ | | | | | | | | | | | | | | | | broadcasted operation On versions of the Cortex-A9 prior to r3p0, an interrupted ICIALLUIS operation may prevent the completion of a following broadcasted operation if the second operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing CP15 maintenance operations to be uninterruptible. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6623/1: Thumb-2: Fix out-of-range offset for Thumb-2 in proc-v7.SDave Martin2011-01-141-1/+3
| | | | | | | | | | Commit d30e45e (ARM: pgtable: switch order of Linux vs hardware page tables) introduced a pre-increment addressing offset which is out of range for Thumb-2. Thumb-2 only permits offsets <256. So split the intruction in two for Thumb-2. Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'pgt' (early part) into develRussell King2011-01-061-10/+8
|\
| * ARM: pgtable: provide RDONLY page table bit rather than WRITE bitRussell King2010-12-221-3/+3
| | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: pgtable: invert L_PTE_EXEC to L_PTE_XNRussell King2010-12-221-2/+2
| | | | | | | | | | | | | | | | The hardware page tables use an XN bit 'execute never'. Historically, we've had a Linux 'execute allow' bit, in the positive sense. Get rid of this artifact as future hardware will continue to have the XN sense. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: pgtable: switch order of Linux vs hardware page tablesRussell King2010-12-221-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | This switches the ordering of the Linux vs hardware page tables in each page, thereby eliminating some of the arithmetic in the page table walks. As we now place the Linux page table at the beginning of the page, we can deal with the offset in the pgt by simply masking it away, along with the other control bits. This also makes the arithmetic all be positive, rather than a mixture. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'misc' into develRussell King2011-01-061-2/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
| * | ARM: 6396/1: Add SWP/SWPB emulation for ARMv7 processorsLeif Lindholm2010-11-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SWP instruction was deprecated in the ARMv6 architecture, superseded by the LDREX/STREX family of instructions for load-linked/store-conditional operations. The ARMv7 multiprocessing extensions mandate that SWP/SWPB instructions are treated as undefined from reset, with the ability to enable them through the System Control Register SW bit. This patch adds the alternative solution to emulate the SWP and SWPB instructions using LDREX/STREX sequences, and log statistics to /proc/cpu/swp_emulation. To correctly deal with copy-on-write, it also modifies cpu_v7_set_pte_ext to change the mappings to priviliged RO when user RO. Signed-off-by: Leif Lindholm <leif.lindholm@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6384/1: Remove the domain switching on ARMv6k/v7 CPUsCatalin Marinas2010-11-041-2/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the domain switching functionality via the set_fs and __switch_to functions on cores that have a TLS register. Currently, the ioremap and vmalloc areas share the same level 1 page tables and therefore have the same domain (DOMAIN_KERNEL). When the kernel domain is modified from Client to Manager (via the __set_fs or in the __switch_to function), the XN (eXecute Never) bit is overridden and newer CPUs can speculatively prefetch the ioremap'ed memory. Linux performs the kernel domain switching to allow user-specific functions (copy_to/from_user, get/put_user etc.) to access kernel memory. In order for these functions to work with the kernel domain set to Client, the patch modifies the LDRT/STRT and related instructions to the LDR/STR ones. The user pages access rights are also modified for kernel read-only access rather than read/write so that the copy-on-write mechanism still works. CPU_USE_DOMAINS gets disabled only if the hardware has a TLS register (CPU_32v6K is defined) since writing the TLS value to the high vectors page isn't possible. The user addresses passed to the kernel are checked by the access_ok() function so that they do not point to the kernel space. Tested-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 6501/1: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in ↵Dave Martin2010-11-301-2/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mm/proc-v7.S Directives such as .long and .word do not magically cause the assembler location counter to become aligned in gas. As a result, using these directives in code sections can result in misaligned data words when building a Thumb-2 kernel (CONFIG_THUMB2_KERNEL). This is a Bad Thing, since the ABI permits the compiler to assume that fundamental types of word size or above are word- aligned when accessing them from C. If the data is not really word-aligned, this can cause impaired performance and stray alignment faults in some circumstances. In general, the following rules should be applied when using data word declaration directives inside code sections: * .quad and .double: .align 3 * .long, .word, .single, .float: .align (or .align 2) * .short: No explicit alignment required, since Thumb-2 instructions are always 2 or 4 bytes in size. immediately after an instruction. In this specific case, we can achieve the desired alignment by forcing a 32-bit branch instruction using the W() macro, since the assembler location counter is already 32-bit aligned in this case. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'devel-stable' into develRussell King2010-10-191-1/+9
|\
| * ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9Tony Lindgren2010-10-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 14eff1812679c76564b775aa95cdd378965f6cfb added proper detection for ARM11MPCore/Cortex-A9 instead of detecting them as ARMv7. However, it was missing the HWCAP_TLS flags. HWCAP_TLS is needed if support for earlier ARMv6 is compiled into the same kernel. Without HWCAP_TLS flags the userspace won't work unless nosmp is specified: Kernel panic - not syncing: Attempted to kill init! CPU0: stopping <c005d5e4>] (unwind_backtrace+0x0/0xec) from [<c004c2f8>] (do_IPI+0xfc/0x184) <c004c2f8>] (do_IPI+0xfc/0x184) from [<c03f25bc>] (__irq_svc+0x9c/0x160) Exception stack(0xc0565f80 to 0xc0565fc8) 5f80: 00000001 c05772a0 00000000 00003a61 c0564000 c05cf500 c003603c c0578600 5fa0: 80033ef0 410fc091 0000001f 00000000 00000000 c0565fc8 c00b91f8 c0057cb4 5fc0: 20000013 ffffffff [<c03f25bc>] (__irq_svc+0x9c/0x160) from [<c0057cb4>] (default_idle+0x30/0x38) [<c0057cb4>] (default_idle+0x30/0x38) from [<c005829c>] (cpu_idle+0x9c/0xf8) [<c005829c>] (cpu_idle+0x9c/0xf8) from [<c0008d48>] (start_kernel+0x2a4/0x300) [<c0008d48>] (start_kernel+0x2a4/0x300) from [<80008084>] (0x80008084) Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to ↵Will Deacon2010-10-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | data corruption On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur under very rare conditions due to a store buffer optimisation. This workaround sets a bit in the diagnostic register of the Cortex-A9, disabling the optimisation and preventing the problem from occurring. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'hotplug' into develRussell King2010-10-181-1/+5
|\ \ | | | | | | | | | | | | Conflicts: arch/arm/kernel/head-common.S
| * | ARM: hotplug cpu: Keep processor information, startup code & ↵Russell King2010-10-081-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __lookup_processor_type When hotplug CPU is enabled, we need to keep the list of supported CPUs, their setup functions, and __lookup_processor_type in place so that we can find and initialize secondary CPUs. Move these into the __CPUINIT section. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: Allow SMP kernels to boot on UP systemsRussell King2010-10-041-14/+27
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | UP systems do not implement all the instructions that SMP systems have, so in order to boot a SMP kernel on a UP system, we need to rewrite parts of the kernel. Do this using an 'alternatives' scheme, where the kernel code and data is modified prior to initialization to replace the SMP instructions, thereby rendering the problematical code ineffectual. We use the linker to generate a list of 32-bit word locations and their replacement values, and run through these replacements when we detect a UP system. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARMDaniel Walker2010-09-171-1/+25
| | | | | | | | | | | | | | | | | | Setting of these bits can cause issues on other SMP SoC's not produced by ARM. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to data ↵Will Deacon2010-09-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | corruption On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur if a shared cache line is replaced on one CPU as another CPU is accessing it. This workaround sets two bits in the diagnostic register of the Cortex-A9, reducing the linefill issuing capabilities of the processor and avoiding the erroneous behaviour. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 6388/1: errata: DMB operation may be faultyWill Deacon2010-09-171-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On versions of the Cortex-A9 up to and including r2p2, under rare circumstances, a DMB instruction between 2 write operations may not ensure the correct visibility ordering of the 2 writes. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing the DMB instruction to behave like a DSB, which functions correctly on the affected cores. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | ARM: 6387/1: errata: check primary part ID in proc-v7.SWill Deacon2010-09-171-3/+8
|/ | | | | | | | | | | | | | Kconfig doesn't have any knowledge of specific v7 cores, so it is possible to select errata workarounds that may cause inadvertent behaviour when executed on a core other than those targetted by the fix. This patch improves the variant and revision checking in proc-v7.S so that the primary part number is also considered when applying errata workarounds. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Factor out common code from cpu_proc_fin()Russell King2010-07-271-4/+1
| | | | | | | | | | | | | | All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6207/1: Replace CONFIG_HAS_TLS_REG with HWCAP_TLS and check for it on V6Tony Lindgren2010-07-091-1/+1
| | | | | | | | | | | | | | | | The TLS register is only available on ARM1136 r1p0 and later. Set HWCAP_TLS flags if hardware TLS is available and test for it if CONFIG_CPU_32v6K is not set for V6. Note that we set the TLS instruction in __kuser_get_tls dynamically as suggested by Jamie Lokier <jamie@shareable.org>. Also the __switch_to code is optimized out in most cases as suggested by Nicolas Pitre <nico@fluxnic.net>. Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 ↵Tony Lindgren2010-01-191-2/+0
| | | | | | | | | | | and V7 comments The comments in cacheflush.h should follow what's in struct cpu_cache_fns. The comments for V6 and V7 are unnecessary. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec workTony Lindgren2010-01-191-1/+8
| | | | | | | | | | | | | | | | | | The comments in arm_machine_restart() suggest that cpu_proc_fin() will clean and disable cache and turn off interrupts. This does not seem to be implemented for proc-v7.S, implement it the same way as for proc-v6.S. This also makes kexec work for v7. Note that a related TLB and branch traget flush patch is also needed to avoid kexec "crc error". Note that there are still some issues that seem to be related to L2 cache being on and causing occasional uncompress "crc error" with kexec. Anyways, this gets kexec mostly working on V7 for now. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARMv7: Check whether the SMP/nAMP mode was already enabledTony Thompson2009-11-041-3/+4
| | | | | | | | If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com> Acked-by: Srinidhi Kasagar <srinidhikasagar@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* ARM: ensure initial page tables are setup for SMP systemsRussell King2009-11-021-3/+4
| | | | | | | | | | | | | | | | | Mapping the same memory using two different attributes (memory type, shareability, cacheability) is unpredictable. During boot, we encounter a situation when we're updating the kernel's page tables which can lead to dirty cache lines existing in the cache which are subsequently missed. This causes stack corruption, and therefore a crash. Therefore, ensure that the shared and cacheability settings matches the configuration that will be used later; this together with the restriction in early_cachepolicy() ensures that we won't create a mismatch during boot. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()Kirill A. Shutemov2009-10-021-1/+1
| | | | | | | | | | | | | | | | | Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* nommu: Do not set PRRR and NMRR in proc-v7.S if !MMUCatalin Marinas2009-07-241-1/+1
| | | | | | ARMv7-R profile CPUs do not have these registers. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Thumb-2: Implement the unified arch/arm/mm supportCatalin Marinas2009-07-241-1/+4
| | | | | | | This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/* files. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-06-141-11/+48
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
| * Add core support for ARMv6/v7 big-endianCatalin Marinas2009-05-301-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with ARMv6, the CPUs support the BE-8 variant of big-endian (byte-invariant). This patch adds the core support: - setting of the BE-8 mode via the CPSR.E register for both kernel and user threads - big-endian page table walking - REV used to rotate instructions read from memory during fault processing as they are still little-endian format - Kconfig and Makefile support for BE-8. The --be8 option must be passed to the final linking stage to convert the instructions to little-endian Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Document the PRRR and NMRR registers settingCatalin Marinas2009-05-301-2/+30
| | | | | | | | | | | | | | | | | | This patch adds a comment to the proc-v7.S file for the setting of the PRRR and NMRR registers. It also sets the PRRR[13:12] bits to 0 (corresponding to the reserved TEX[0]CB encoding 110) to be consistent with the documentation. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Enable the SWP instructionCatalin Marinas2009-05-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | The SWP instruction has been deprecated starting with the ARMv6 architecture. On ARMv7 processors with the multiprocessor extensions (like Cortex-A9), this instruction is disabled by default but it can be enabled by setting bit 10 in the System Control register. Note that setting this bit is safe even if the ARMv7 processor has the SWP instruction enabled by default. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Mark the PTWs inner WBWA on SMP and WB on UPTony Thompson2009-05-301-3/+9
| | | | | | | | | | | | | | | | | | | | There are additional bits to set for the ARMv7 SMP extensions in the TTBR registers. The IRGN bits order is counter-intuitive but it allows software built for the ARMv7 base architecture to run on an implementation with the MP extensions. Signed-off-by: Tony Thompson <Anthony.Thompson@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * Check whether the TLB operations need broadcasting on SMP systemsCatalin Marinas2009-05-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | ARMv7 SMP hardware can handle the TLB maintenance operations broadcasting in hardware so that the software can avoid the costly IPIs. This patch adds the necessary checks (the MMFR3 CPUID register) to avoid the broadcasting if already supported by the hardware. (this patch is based on the work done by Tony Thompson @ ARM) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | [ARM] ARMv7 errata: only apply fixes when running on applicable CPURussell King2009-06-021-11/+25
|/ | | | | | | | | | | | | | | | | Currently, whenever an erratum workaround is enabled, it will be applied whether or not the erratum is relevent for the CPU. This patch changes this - we check the variant and revision fields in the main ID register to determine which errata to apply. We also avoid re-applying erratum 460075 if it has already been applied. Applying this fix in non-secure mode results in the kernel failing to boot (or even do anything.) This fixes booting on some ARMv7 based platforms which otherwise silently fail. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-05-021-0/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten with stale data [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is created [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branch [ARM] 5488/1: ARM errata: Invalidation of the Instruction Cache operation can fail davinci: DM644x: NAND: update partitioning davinci: update DM644x support in preparation for more SoCs davinci: DM644x: rename board file davinci: update pin-multiplexing support davinci: serial: generalize for more SoCs davinci: DM355 IRQ Definitions davinci: DM646x: add interrupt number and priorities davinci: PSC: Clear bits in MDCTL reg before setting new bits davinci: gpio bugfixes davinci: add EDMA driver davinci: timers: use clk_get_rate() [ARM] pxa/littleton: add missing da9034 touchscreen support [ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expanders [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC [ARM] pxa: remove unused CPU_FREQ_PXA Kconfig symbol ...
| * [ARM] 5489/1: ARM errata: Data written to the L2 cache can be overwritten ↵Catalin Marinas2009-04-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | with stale data This patch is a workaround for the 460075 Cortex-A8 (r2p0) erratum. It configures the L2 cache auxiliary control register so that the Write Allocate mode for the L2 cache is disabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5490/1: ARM errata: Processor deadlock when a false hazard is createdCatalin Marinas2009-04-301-0/+6
| | | | | | | | | | | | | | | | | | This patch adds a workaround for the 458693 Cortex-A8 (r2p0) erratum. It sets the corresponding bits in the auxiliary control register so that the PLD instruction becomes a NOP. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] 5487/1: ARM errata: Stale prediction on replaced interworking branchCatalin Marinas2009-04-301-0/+8
| | | | | | | | | | | | | | | | This patch adds the workaround for the 430973 Cortex-A8 (r1p0..r1p2) erratum. The BTAC/BTB is now flushed at every context switch. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | arm: Use __INIT macro instead of .text.init.Tim Abbott2009-04-271-1/+2
|/ | | | | | | | | | | | | arm is placing some code in the .text.init section, but it does not reference that section in its linker scripts. This change moves this code from the .text.init section to the .init.text section, which is presumably where it belongs. Signed-off-by: Tim Abbott <tabbott@mit.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into develRussell King2008-11-271-3/+16
|\
| * Modern processors may need to drain the WB before WFICatalin Marinas2008-11-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since WFI may cause the processor to enter a low-power mode, data may still be in the write buffer. This patch adds a DSB (or DWB) to the cpu_(v6|v7)_do_idle functions before the WFI. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Add SMP initialisation to proc-v7.SJon Callan2008-11-061-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the SMP/nAMP mode setting to __v7_setup and also sets TTBR to shared page table walks if SMP is enabled. The PTWs are also marked inner cacheable for both SMP and UP modes (setting this is fine even if the CPU doesn't support the feature). Signed-off-by: Jon Callan <Jon.Callan@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * ARMv7: Do not set TTBR0 in __v7_setupCatalin Marinas2008-11-061-1/+0
| | | | | | | | | | | | | | | | | | | | This register is set in __enable_mmu in the head.S file. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | [ARM] mm: fix page table initializationRussell King2008-11-061-6/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | As a result of the ptebits changes, we ended up marking device mappings as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with serial ports and the like. While reviewing the section mapping table entries, other errors in the memory type settings for devices were detected and confirmed to prevent Xscale3 platforms booting. Tested on: OMAP34xx (ARMv7), OMAP24xx (ARMv6), OMAP16xx (ARM926T, ARMv5), PXA311 (Xscale3), PXA272 (Xscale), PXA255 (Xscale), IXP42x (Xscale), S3C2410 (ARM920T, ARMv4T), ARM720T (ARMv4T) StrongARM-110 (ARMv4) Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Ben Dooks <ben-linux@fluff.org> Tested-by: Anders Grafström <grfstrm@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 5318/1: Swap the PRRR and NMRR values in proc-v7.SCatalin Marinas2008-10-221-2/+2
| | | | | | | | A typo caused these values to be swapped leading to incorrect memory type attributes. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud