summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-feroceon.S
Commit message (Collapse)AuthorAgeFilesLines
* ARM: 8350/1: proc-feroceon: Fix feroceon_proc_info macroAndrew Lunn2015-05-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") broke booting for Kirkwood. The kernel would say: Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported processor variant (0x56251311). Fix it by removing the extraneous .long __feroceon_setup from the feroceon_proc_info macro. Fixes: bf35706f3d09 ("ARM: 8314/1: replace PROCINFO embedded branch with relative offset") Reported-by: Florian Fainelli <f.fainelli@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 8314/1: replace PROCINFO embedded branch with relative offsetArd Biesheuvel2015-03-281-2/+3
| | | | | | | | | | | | | | | This patch replaces the 'branch to setup()' instructions embedded in the PROCINFO structs with the offset to that setup function relative to the base of the struct. This preserves the position independent nature of that field, but uses a data item rather than an instruction. This is mainly done to prevent linker failures on large kernels, where the setup function is out of reach for the branch. Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+Russell King2014-07-181-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARMv6 and greater introduced a new instruction ("bx") which can be used to return from function calls. Recent CPUs perform better when the "bx lr" instruction is used rather than the "mov pc, lr" instruction, and this sequence is strongly recommended to be used by the ARM architecture manual (section A.4.1.1). We provide a new macro "ret" with all its variants for the condition code which will resolve to the appropriate instruction. Rather than doing this piecemeal, and miss some instances, change all the "mov pc" instances to use the new macro, with the exception of the "movs" instruction and the kprobes code. This allows us to detect the "mov pc, lr" case and fix it up - and also gives us the possibility of deploying this for other registers depending on the CPU selection. Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1 Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood Tested-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385 Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7818/1: feroceon: Add suspend/resume operationEzequiel Garcia2013-08-201-0/+26
| | | | | | | | Add support for suspend/resume operations. The implemented procedures are identical to the ones for ARM926. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* arm: delete __cpuinit/__CPUINIT usage from all ARM usersPaul Gortmaker2013-07-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ARM: 7542/1: mm: fix cache LoUIS API for xscale and feroceonLorenzo Pieralisi2012-09-281-0/+1
| | | | | | | | | | Some architectures like xscale and feroceon have cache API variants that map cache flushing functions as aliases to the base architecture. This patch adds the required aliases to complete the implementation of cache flushing LoUIS API. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: mm: implement LoUIS API for cache maintenance opsLorenzo Pieralisi2012-09-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM v7 architecture introduced the concept of cache levels and related control registers. New processors like A7 and A15 embed an L2 unified cache controller that becomes part of the cache level hierarchy. Some operations in the kernel like cpu_suspend and __cpu_disable do not require a flush of the entire cache hierarchy to DRAM but just the cache levels belonging to the Level of Unification Inner Shareable (LoUIS), which in most of ARM v7 systems correspond to L1. The current cache flushing API used in cpu_suspend and __cpu_disable, flush_cache_all(), ends up flushing the whole cache hierarchy since for v7 it cleans and invalidates all cache levels up to Level of Coherency (LoC) which cripples system performance when used in hot paths like hotplug and cpuidle. Therefore a new kernel cache maintenance API must be added to cope with latest ARM system requirements. This patch adds flush_cache_louis() to the ARM kernel cache maintenance API. This function cleans and invalidates all data cache levels up to the Level of Unification Inner Shareable (LoUIS) and invalidates the instruction cache for processors that support it (> v7). This patch also creates an alias of the cache LoUIS function to flush_kern_all for all processor versions prior to v7, so that the current cache flushing behaviour is unchanged for those processors. v7 cache maintenance code implements a cache LoUIS function that cleans and invalidates the D-cache up to LoUIS and invalidates the I-cache, according to the new API. Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: 7408/1: cacheflush: return error to userspace when flushing syscall failsWill Deacon2012-05-021-0/+1
| | | | | | | | | | | | | | | | | The cacheflush syscall can fail for two reasons: (1) The arguments are invalid (nonsensical address range or no VMA) (2) The region generates a translation fault on a VIPT or PIPT cache This patch allows do_cache_op to return an error code to userspace in the case of the above. The various coherent_user_range implementations are modified to return 0 in the case of VIVT caches or -EFAULT in the case of an abort on v6/v7 cores. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: proc-*.S: place cpu_reset functions into .idmap.text sectionWill Deacon2011-12-061-0/+3
| | | | | | | | | | | The CPU reset functions disable the MMU and therefore must be executed with an identity mapping in place. This patch places the CPU reset functions into the .idmap.text section, causing the idmap code to include them as part of the identity mapping. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ARM: mm: proc-feroceon: Use the new processor struct macrosDave Martin2011-07-071-153/+49
| | | | | Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
* ARM: pm: add generic CPU suspend/resume supportRussell King2011-02-221-0/+3
| | | | | | | | | | | This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6466/1: implement flush_icache_all for the rest of the CPUsMika Westerberg2010-10-281-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 81d11955bf0 ("ARM: 6405/1: Handle __flush_icache_all for CONFIG_SMP_ON_UP") added a new function to struct cpu_cache_fns: flush_icache_all(). It also implemented this for v6 and v7 but not for v5 and backwards. Without the function pointer in place, we will be calling wrong cache functions. For example with ep93xx we get following: Unable to handle kernel paging request at virtual address ee070f38 pgd = c0004000 [ee070f38] *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.36+ #1) PC is at 0xee070f38 LR is at __dma_alloc+0x11c/0x2d0 pc : [<ee070f38>] lr : [<c0032c8c>] psr: 60000013 sp : c581bde0 ip : 00000000 fp : c0472000 r10: c0472000 r9 : 000000d0 r8 : 00020000 r7 : 0001ffff r6 : 00000000 r5 : c0472400 r4 : c5980000 r3 : c03ab7e0 r2 : 00000000 r1 : c59a0000 r0 : c5980000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c000717f Table: c0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc581a270) [<c0032c8c>] (__dma_alloc+0x11c/0x2d0) [<c0032e5c>] (dma_alloc_writecombine+0x1c/0x24) [<c0204148>] (ep93xx_pcm_preallocate_dma_buffer+0x44/0x60) [<c02041c0>] (ep93xx_pcm_new+0x5c/0x88) [<c01ff188>] (snd_soc_instantiate_cards+0x8a8/0xbc0) [<c01ff59c>] (soc_probe+0xfc/0x134) [<c01adafc>] (platform_drv_probe+0x18/0x1c) [<c01acca4>] (driver_probe_device+0xb0/0x16c) [<c01ac284>] (bus_for_each_drv+0x48/0x84) [<c01ace90>] (device_attach+0x50/0x68) [<c01ac0f8>] (bus_probe_device+0x24/0x44) [<c01aad7c>] (device_add+0x2fc/0x44c) [<c01adfa8>] (platform_device_add+0x104/0x15c) [<c0015eb8>] (simone_init+0x60/0x94) [<c0021410>] (do_one_initcall+0xd0/0x1a4) __dma_alloc() calls (inlined) __dma_alloc_buffer() which ends up calling dmac_flush_range(). Now since the entries in the arm920_cache_fns are shifted by one, we jump into address 0xee070f38 which is actually next instruction after the arm920_cache_fns structure. So implement flush_icache_all() for the rest of the supported CPUs using a generic 'invalidate I cache' instruction. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: hotplug cpu: Keep processor information, startup code & ↵Russell King2010-10-081-1/+1
| | | | | | | | | | | __lookup_processor_type When hotplug CPU is enabled, we need to keep the list of supported CPUs, their setup functions, and __lookup_processor_type in place so that we can find and initialize secondary CPUs. Move these into the __CPUINIT section. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Factor out common code from cpu_proc_fin()Russell King2010-07-271-6/+1
| | | | | | | | | | | | | | All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: dma-mapping: remove dmac_clean_range and dmac_inv_rangeRussell King2010-02-151-8/+4
| | | | | | | These are now unused, and so can be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dma-mapping: provide per-cpu type map/unmap functionsRussell King2010-02-151-0/+42
| | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: add size argument to __cpuc_flush_dcache_pageRussell King2009-12-141-7/+8
| | | | | | | ... and rename the function since it no longer operates on just pages. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()Kirill A. Shutemov2009-10-021-1/+1
| | | | | | | | | | | | | | | | | Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King2008-10-091-4/+8
|\ | | | | | | Merge branch 'orion-devel' into devel
| * [ARM] Kirkwood: add support for L2 cache WB/WT selectionRonen Shitrit2008-09-251-4/+8
| | | | | | | | | | | | | | | | Feroceon L2 cache can work in eighther write through or write back mode on Kirkwood. Add the option to configure this mode according to Kconfig. Signed-off-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | [ARM] Don't include asm/elf.h in asm codeRussell King2008-10-011-1/+1
| | | | | | | | | | | | asm code really wants asm/hwcap.h, so include that instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] Convert set_pte_ext implementions to macrosRussell King2008-10-011-18/+1
|/ | | | | | | There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Feroceon: don't disable BPU on bootSaeed Bishara2008-07-071-4/+5
| | | | | | | | | | On Feroceon platforms that have a branch prediction unit, bit 11 of the cp15 control register controls the BPU. This patch keeps the old value of this bit instead of always clearing it. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Feroceon: 88fr571-vd supportLennert Buytenhek2008-06-221-0/+30
| | | | | | | Add support for the Feroceon 88fr571-vd CPU core as found in e.g. the Marvell Discovery Duo family of ARM SoCs. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Feroceon: 88fr131 supportLennert Buytenhek2008-06-221-0/+30
| | | | | | | Add support for the Shiva 88fr131 CPU core as found in e.g. the Marvell Kirkwood family of ARM SoCs. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Feroceon: L2 cache supportLennert Buytenhek2008-06-221-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the unified Feroceon L2 cache controller as found in e.g. the Marvell Kirkwood and Marvell Discovery Duo families of ARM SoCs. Note that: - Page table walks are outer uncacheable on Kirkwood and Discovery Duo, since the ARMv5 spec provides no way to indicate outer cacheability of page table walks (specifying it in TTBR[4:3] is an ARMv6+ feature). This requires adding L2 cache clean instructions to proc-feroceon.S (dcache_clean_area(), set_pte()) as well as to tlbflush.h ({flush,clean}_pmd_entry()). The latter case is handled by defining a new TLB type (TLB_FEROCEON) which is almost identical to the v4wbi one but provides a TLB_L2CLEAN_FR flag. - The Feroceon L2 cache controller supports L2 range (i.e. 'clean L2 range by MVA' and 'invalidate L2 range by MVA') operations, and this patch uses those range operations for all Linux outer cache operations, as they are faster than the regular per-line operations. L2 range operations are not interruptible on this hardware, which avoids potential livelock issues, but can be bad for interrupt latency, so there is a compile-time tunable (MAX_RANGE_SIZE) which allows you to select the maximum range size to operate on at once. (Valid range is between one cache line and one 4KiB page, and must be a multiple of the line size.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Feroceon: L1 cache range operation supportStanislav Samsonov2008-06-221-1/+68
| | | | | | | | | | | This patch adds support for the L1 D cache range operations that are supported by the Marvell Discovery Duo and Marvell Kirkwood ARM SoCs. Signed-off-by: Stanislav Samsonov <samsonov@marvell.com> Acked-by: Saeed Bishara <saeed@marvell.com> Reviewed-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Feroceon: allow more old Feroceon IDsKe Wei2008-06-221-2/+2
| | | | | | | | | | There are a couple more Feroceon-based SoCs out in the field that use different Variant and Architecture fields in their Main ID registers -- this patch tweaks the processor match/mask in proc-feroceon.S to catch those SoCs as well. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Feroceon: speed up flushing of the entire cacheNicolas Pitre2008-06-221-11/+48
| | | | | | | | | | | | | | Flushing the L1 D cache with a test/clean/invalidate loop is very easy in software, but it is not the quickest way of doing it, as there is a lot of overhead involved in re-scanning the cache from the beginning every time we hit a dirty line. This patch makes proc-feroceon.S use "clean+invalidate by set/way" loops according to possible cache configuration of Feroceon CPUs (either direct-mapped or 4-way set associative). Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Feroceon: annotate 88fr531-vd CPU entriesLennert Buytenhek2008-06-221-4/+9
| | | | | | | | | Annotate the entries for the 88fr531-vd CPU core in arch/arm/boot/compressed/head.S and arch/arm/mm/proc-feroceon.S with the full name of the core. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Orion: fix various whitespace and coding style issuesLennert Buytenhek2008-06-221-4/+4
| | | | | | | | | | More cosmetic cleanup: - Replace 8-space indents by proper tab indents. - In structure initialisers, use a trailing comma for every member. - Collapse "},\n{" in structure initialiers to "}, {". Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
* [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page()Lennert Buytenhek2008-04-281-2/+2
| | | | | | | | | | | | | | | This patch implements a set of Feroceon-specific {copy,clear}_user_page() routines that perform more optimally than the generic implementations. This also deals with write-allocate caches (Feroceon can run L1 D in WA mode) which otherwise prevents Linux from booting. [nico: optimized the code even further] Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Feroceon: fix function alignment in proc-feroceon.SNicolas Pitre2008-04-281-3/+10
| | | | | | One overzealous .align 10 fixed, and a few .align5 added. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN checkLennert Buytenhek2008-04-281-3/+0
| | | | | | | | | Since the Feroceon cache replacement policy is always pseudorandom (and the relevant control register bit is ignored), remove the CONFIG_CPU_CACHE_ROUND_ROBIN check from proc-feroceon.S. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH checkLennert Buytenhek2008-04-281-40/+0
| | | | | | | | | Since the Feroceon doesn't have a global WT override bit like ARM926 does, remove all code relating to this mode of operation from proc-feroceon.S. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] fix 48d7927bdf071d05cf5d15b816cf06b0937cb84fCatalin Marinas2008-04-241-1/+1
| | | | | | | | | | The proc-*.S files have the _prefetch_abort pointer placed at the end of the processor structure but the cpu-multi32.h defines it in the second position. The patch also fixes the support for XSC3 and the MMU-less CPUs (740, 7tdmi, 940, 946 and 9tdmi). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Add a prefetch abort handlerPaul Brook2008-04-181-0/+1
| | | | | | | | | This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* [ARM] Feroceon: support old cores with ARM926 IDTzachi Perelstein2008-01-261-0/+27
| | | | | | | | | | This enables the usage of some old Feroceon cores for which the CPU ID is equal to the ARM926 ID. Relevant for Feroceon-1850 and old Feroceon-2850. Signed-off-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Marvell Feroceon CPU core supportAssaf Hoffman2008-01-261-0/+479
The Feroceon is a family of independent ARMv5TE compliant CPU core implementations, supporting a variable depth pipeline and out-of-order execution. The Feroceon is configurable with VFP support, and the later models in the series are superscalar with up to two instructions per clock cycle. This patch adds the initial low-level cache/TLB handling for this core. Signed-off-by: Assaf Hoffman <hoffman@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Reviewed-by: Nicolas Pitre <nico@marvell.com> Reviewed-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud