summaryrefslogtreecommitdiffstats
path: root/arch/arm/mm/proc-arm1020.S
Commit message (Collapse)AuthorAgeFilesLines
* arm: delete __cpuinit/__CPUINIT usage from all ARM usersPaul Gortmaker2013-07-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the ARM uses of the __cpuinit macros from C code, and all __CPUINIT from assembly code. It also had two ".previous" section statements that were paired off against __CPUINIT (aka .section ".cpuinit.text") that also get removed here. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Russell King <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ARM: mm: implement LoUIS API for cache maintenance opsLorenzo Pieralisi2012-09-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM v7 architecture introduced the concept of cache levels and related control registers. New processors like A7 and A15 embed an L2 unified cache controller that becomes part of the cache level hierarchy. Some operations in the kernel like cpu_suspend and __cpu_disable do not require a flush of the entire cache hierarchy to DRAM but just the cache levels belonging to the Level of Unification Inner Shareable (LoUIS), which in most of ARM v7 systems correspond to L1. The current cache flushing API used in cpu_suspend and __cpu_disable, flush_cache_all(), ends up flushing the whole cache hierarchy since for v7 it cleans and invalidates all cache levels up to Level of Coherency (LoC) which cripples system performance when used in hot paths like hotplug and cpuidle. Therefore a new kernel cache maintenance API must be added to cope with latest ARM system requirements. This patch adds flush_cache_louis() to the ARM kernel cache maintenance API. This function cleans and invalidates all data cache levels up to the Level of Unification Inner Shareable (LoUIS) and invalidates the instruction cache for processors that support it (> v7). This patch also creates an alias of the cache LoUIS function to flush_kern_all for all processor versions prior to v7, so that the current cache flushing behaviour is unchanged for those processors. v7 cache maintenance code implements a cache LoUIS function that cleans and invalidates the D-cache up to LoUIS and invalidates the I-cache, according to the new API. Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: 7408/1: cacheflush: return error to userspace when flushing syscall failsWill Deacon2012-05-021-0/+1
| | | | | | | | | | | | | | | | | The cacheflush syscall can fail for two reasons: (1) The arguments are invalid (nonsensical address range or no VMA) (2) The region generates a translation fault on a VIPT or PIPT cache This patch allows do_cache_op to return an error code to userspace in the case of the above. The various coherent_user_range implementations are modified to return 0 in the case of VIVT caches or -EFAULT in the case of an abort on v6/v7 cores. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: proc-*.S: place cpu_reset functions into .idmap.text sectionWill Deacon2011-12-061-0/+3
| | | | | | | | | | | The CPU reset functions disable the MMU and therefore must be executed with an identity mapping in place. This patch places the CPU reset functions into the .idmap.text section, causing the idmap code to include them as part of the identity mapping. Acked-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
* ARM: mm: proc-arm1020: Use the new processor struct macrosDave Martin2011-07-071-39/+6
| | | | Signed-off-by: Dave Martin <dave.martin@linaro.org>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* ARM: pm: add generic CPU suspend/resume supportRussell King2011-02-221-0/+3
| | | | | | | | | | | This adds core support for saving and restoring CPU coprocessor registers for suspend/resume support. This contains support for suspend with ARM920, ARM926, SA11x0, PXA25x, PXA27x, PXA3xx, V6 and V7 CPUs. Tested on Assabet and Tegra 2. Tested-by: Colin Cross <ccross@android.com> Tested-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6466/1: implement flush_icache_all for the rest of the CPUsMika Westerberg2010-10-281-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 81d11955bf0 ("ARM: 6405/1: Handle __flush_icache_all for CONFIG_SMP_ON_UP") added a new function to struct cpu_cache_fns: flush_icache_all(). It also implemented this for v6 and v7 but not for v5 and backwards. Without the function pointer in place, we will be calling wrong cache functions. For example with ep93xx we get following: Unable to handle kernel paging request at virtual address ee070f38 pgd = c0004000 [ee070f38] *pgd=00000000 Internal error: Oops: 80000005 [#1] PREEMPT last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.36+ #1) PC is at 0xee070f38 LR is at __dma_alloc+0x11c/0x2d0 pc : [<ee070f38>] lr : [<c0032c8c>] psr: 60000013 sp : c581bde0 ip : 00000000 fp : c0472000 r10: c0472000 r9 : 000000d0 r8 : 00020000 r7 : 0001ffff r6 : 00000000 r5 : c0472400 r4 : c5980000 r3 : c03ab7e0 r2 : 00000000 r1 : c59a0000 r0 : c5980000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c000717f Table: c0004000 DAC: 00000017 Process swapper (pid: 1, stack limit = 0xc581a270) [<c0032c8c>] (__dma_alloc+0x11c/0x2d0) [<c0032e5c>] (dma_alloc_writecombine+0x1c/0x24) [<c0204148>] (ep93xx_pcm_preallocate_dma_buffer+0x44/0x60) [<c02041c0>] (ep93xx_pcm_new+0x5c/0x88) [<c01ff188>] (snd_soc_instantiate_cards+0x8a8/0xbc0) [<c01ff59c>] (soc_probe+0xfc/0x134) [<c01adafc>] (platform_drv_probe+0x18/0x1c) [<c01acca4>] (driver_probe_device+0xb0/0x16c) [<c01ac284>] (bus_for_each_drv+0x48/0x84) [<c01ace90>] (device_attach+0x50/0x68) [<c01ac0f8>] (bus_probe_device+0x24/0x44) [<c01aad7c>] (device_add+0x2fc/0x44c) [<c01adfa8>] (platform_device_add+0x104/0x15c) [<c0015eb8>] (simone_init+0x60/0x94) [<c0021410>] (do_one_initcall+0xd0/0x1a4) __dma_alloc() calls (inlined) __dma_alloc_buffer() which ends up calling dmac_flush_range(). Now since the entries in the arm920_cache_fns are shifted by one, we jump into address 0xee070f38 which is actually next instruction after the arm920_cache_fns structure. So implement flush_icache_all() for the rest of the supported CPUs using a generic 'invalidate I cache' instruction. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: hotplug cpu: Keep processor information, startup code & ↵Russell King2010-10-081-1/+1
| | | | | | | | | | | __lookup_processor_type When hotplug CPU is enabled, we need to keep the list of supported CPUs, their setup functions, and __lookup_processor_type in place so that we can find and initialize secondary CPUs. Move these into the __CPUINIT section. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: Factor out common code from cpu_proc_fin()Russell King2010-07-271-5/+1
| | | | | | | | | | | | | | All implementations of cpu_proc_fin() start by disabling interrupts and then flush caches. Rather than have every processors proc_fin() implementation do this, move it out into generic code - and move the cache flush past setup_mm_for_reboot() (so it can benefit from having caches still enabled.) This allows cpu_proc_fin() to become independent of the L1/L2 cache types, and eventually move the L2 cache flushing into the L2 support code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: dma-mapping: remove dmac_clean_range and dmac_inv_rangeRussell King2010-02-151-4/+2
| | | | | | | These are now unused, and so can be removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: dma-mapping: provide per-cpu type map/unmap functionsRussell King2010-02-151-0/+26
| | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: add size argument to __cpuc_flush_dcache_pageRussell King2009-12-141-5/+6
| | | | | | | ... and rename the function since it no longer operates on just pages. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()Kirill A. Shutemov2009-10-021-1/+1
| | | | | | | | | | | | | | | | | Instruction fault status register, IFSR, was introduced on ARMv6 to provide status information about the last insturction fault. It needed for proper prefetch abort handling. Now we have three prefetch abort model: * legacy - for CPUs before ARMv6. They doesn't provide neither IFSR nor IFAR. We simulate IFSR with section translation fault status for them to generalize code; * ARMv6 - provides IFSR, but not IFAR; * ARMv7 - provides both IFSR and IFAR. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Don't include asm/elf.h in asm codeRussell King2008-10-011-1/+1
| | | | | | asm code really wants asm/hwcap.h, so include that instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Convert set_pte_ext implementions to macrosRussell King2008-10-011-23/+1
| | | | | | | There are actually only four separate implementations of set_pte_ext. Use assembler macros to insert code for these into the proc-*.S files. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] fix 48d7927bdf071d05cf5d15b816cf06b0937cb84fCatalin Marinas2008-04-241-1/+1
| | | | | | | | | | The proc-*.S files have the _prefetch_abort pointer placed at the end of the processor structure but the cpu-multi32.h defines it in the second position. The patch also fixes the support for XSC3 and the MMU-less CPUs (740, 7tdmi, 940, 946 and 9tdmi). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Add a prefetch abort handlerPaul Brook2008-04-181-0/+1
| | | | | | | | | This patch adds a prefetch abort handler similar to the data abort one and renames the latter for consistency. Initial implementation by Paul Brook with some renaming by Catalin Marinas. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* [ARM] Unuse another Linux PTE bitRussell King2006-12-131-2/+2
| | | | | | | | | | L_PTE_ASID is not really required to be stored in every PTE, since we can identify it via the address passed to set_pte_at(). So, create set_pte_ext() which takes the address of the PTE to set, the Linux PTE value, and the additional CPU PTE bits which aren't encoded in the Linux PTE value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Include asm/elf.h instead of asm/procinfo.hRussell King2006-11-301-1/+1
| | | | | | | These files want to provide/access ELF hwcap information, so should be including asm/elf.h rather than asm/procinfo.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] More missing proc-macros.S includesRussell King2006-07-031-0/+2
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2006-07-021-9/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
| * Merge nommu branchRussell King2006-07-011-9/+7
| |\
| | * [ARM] nommu: provide a way for correct control register value selectionRussell King2006-06-291-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most MMU-based CPUs have a restriction on the setting of the data cache enable and mmu enable bits in the control register, whereby if the data cache is enabled, the MMU must also be enabled. Enabling the data cache without the MMU is an invalid combination. However, there are CPUs where the data cache can be enabled without the MMU. In order to allow these CPUs to take advantage of that, provide a method whereby each proc-*.S file defines the control regsiter value for use with nommu (with the MMU disabled.) Later on, when we add support for enabling the MMU on these devices, we can adjust the "crval" macro to also enable the data cache for nommu. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | [ARM] Set bit 4 on section mappings correctly depending on CPURussell King2006-06-291-0/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | On some CPUs, bit 4 of section mappings means "update the cache when written to". On others, this bit is required to be one, and others it's required to be zero. Finally, on ARMv6 and above, setting it turns on "no execute" and prevents speculative prefetches. With all these combinations, no one value fits all CPUs, so we have to pick a value depending on the CPU type, and the area we're mapping. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
|/ | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [ARM] nommu: Initial uCLinux support for MMU-based CPUsHyok S. Choi2006-06-281-0/+9
| | | | | | | | | | In noMMU mode, various of functions which are defined in mm/proc-*.S is not valid or needed to be avoided. i.g. switch_mm is not needed, just returns and this makes the I & D caches are valid which shows great improvement of performance including task switching and IPC. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge nommu treeRussell King2006-03-251-0/+1
|\ | | | | | | | | | | Fix merge conflict in arch/arm/mm/proc-xscale.S Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] nommu: Move hardware page table definitions to pgtable-hwdef.hRussell King2006-03-211-0/+1
| | | | | | | | | | | | | | Move the hardware PMD and PTE page table definitions from pgtable.h into pgtable-hwdef.h, and include pgtable-hwdef.h as necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | [ARM] Remove unnecessary asm/hardware.h includesRussell King2006-03-211-1/+0
|/ | | | | | | | | asm/hardware.h is not required for the majority of processor support files, ioremap support, mm initialisation, acorn IO support, nor the debug code (which picks up its machine specific includes via debug-macros.S) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2926/1: .proc.info - postfix section with .init for `make buildcheck`Ben Dooks2005-09-201-1/+1
| | | | | | | | | | | Patch from Ben Dooks The `make buildcheck` is erroneously reporting that the .proc.info list is referencing items in the .init section as it is not itself postfixed with .init Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* kbuild: arm - use generic asm-offsets.h supportSam Ravnborg2005-09-091-1/+1
| | | | | | | Delete obsoleted stuff from arch Makefile and rename constants.h to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUsCatalin Marinas2005-06-301-2/+2
| | | | | | | | | | | Patch from Catalin Marinas This patch fixes the V bit setting for the ARM1020x processors. At reset, this bit is automatically set to the value of the HIVECSINIT input signal which just happened to be 1 but it is not mandatory. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2777/1: Fix broken comment arch/arm/mm/proc-arm1020.SCatalin Marinas2005-06-301-1/+1
| | | | | | | | | | Patch from Catalin Marinas This patch fixes a broken comment in the proc-arm1020.S file which prevents the file compilation Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+530
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud