summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2410
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] 3286/2: S3C2400 - adds to the table of supported CPUsLucas Correia Villa Real2006-02-011-2/+16
| | | | | | | | | | | Patch from Lucas Correia Villa Real Oops, sorry for the typo on name_s3c2400, a new patch is attached. About GSTATUS1, S3C2400 doesn't have that register, so it's not safe to use that memory address to identify its CPU. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3284/1: S3C2400 - adds support to GPIOLucas Correia Villa Real2006-02-015-65/+152
| | | | | | | | | | | Patch from Lucas Correia Villa Real This patch adds support to GPIO on the S3C2400, which is going to be used by the GP32 machine and the SMDK2400 development board. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3266/1: S3C2400 - adds macro S3C24XXLucas Correia Villa Real2006-01-264-33/+35
| | | | | | | | | | | Patch from Lucas Correia Villa Real This patch defines S3C2400 memory map and adds a S3C24XX macro for common resources between S3C2400, S3C2410 and S3C2440 cpus. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre2006-01-1310-10/+0
| | | | | | | | | | | | Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Convert some arm semaphores to mutexesArjan van de Ven2006-01-121-5/+6
| | | | | | | | The arm clock semaphores are strict mutexes, convert them to the new mutex implementation Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3246/1: S3C24XX - retab clock list in arch/arm/mach-s3c2410/clock.cBen Dooks2006-01-091-103/+103
| | | | | | | | | | | | Patch from Ben Dooks Properly tabulate the clock table in arch/arm/mach-s3c2410/clock.c and put the requisite commas on the end of the structs. Fix the comment about clock enable and disable in the setup code Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] IRQ type flagsRussell King2006-01-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [ARM] Move asm/hardware/clock.h to linux/clk.hRussell King2006-01-074-6/+4
| | | | | | | This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Remove clk_use()/clk_unuse()Russell King2006-01-033-17/+0
| | | | | | | | | It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3161/1: BAST - fix commas on end of structsBen Dooks2005-11-161-14/+14
| | | | | | | | | | Patch from Ben Dooks Make the use of , on the lsat entry structs consistenent through arch/arm/mach-s3c2410/mach-bast.c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3138/1: SMDK2440 - fix map_desc initialisation (and ISA memory space)Ben Dooks2005-11-091-2/+21
| | | | | | | | | | | | Patch from Ben Dooks Fix the map_desc initialisers for the SMDK2440 machine to use the new .pfn method, and at the same time making the differntiation between ISA IO and Memory space accesses Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3137/1: RX3715 - fix map_desc initialiserBen Dooks2005-11-091-2/+11
| | | | | | | | | | | | | Patch from Ben Dooks Change the initialiser for the map_desc for the iPAQ RX3715 to use the new pfn initialiser, and also reduce the amount of ISA space mapped (we only need to stop any ISA IO writes OOPsing the system, so do not need >1Mbyte of space) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3136/1: Anubis - fix map_desc initialisersBen Dooks2005-11-091-9/+42
| | | | | | | | | | Patch from Ben Dooks Fix the map_desc initialisers for the Simtec Anubis board to match the new initialiser scheme. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3132/1: S3C2410 - reset on decompression errorBen Dooks2005-11-081-0/+8
| | | | | | | | | | Patch from Ben Dooks Force a watchdog reset if the system fails to decompress properly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3126/1: BAST: fix map_desc initialisationBen Dooks2005-11-081-21/+52
| | | | | | | | | | Patch from Ben Dooks Fix the map_desc entries to use the new .pfn initialiser for the Simtec BAST machine support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3125/2: VR1000: Fix map_decs initialiserBen Dooks2005-11-081-18/+38
| | | | | | | | | | | Patch from Ben Dooks Fix the initialisation of the map_desc fields in the Thorcom VR1000 machine support to use the new .pfn initialiser. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-11-011-4/+66
|\
| * [ARM] 3071/1: RX3715 - add lcd/fb platform setupBen Dooks2005-11-011-4/+66
| | | | | | | | | | | | | | | | | | | | Patch from Ben Dooks Platform data for the LCD/framebuffer driver for the RX3715 LCD panel. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Create platform_device.h to contain all the platform device details.Russell King2005-10-2915-10/+15
|/ | | | | | | | Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ARM] 3047/1: SMDK2440 - add framebuffer platform dataBen Dooks2005-10-281-0/+70
| | | | | | | | | | Patch from Ben Dooks Add platform data for framebuffer for the onboard LCD module Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3046/1: BAST - add framebuffer platform dataBen Dooks2005-10-281-0/+40
| | | | | | | | | Patch from Ben Dooks Add framebuffer platform data Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3045/2: S3C2410 - change init for lcd platform dataBen Dooks2005-10-282-7/+12
| | | | | | | | | | | Patch from Ben Dooks Change set_s3c2410fb_info to s3c2410_fb_set_platdata and use kmalloc() for the copy of the information it is passed. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3034/1: S3C2410 - fix size of devices in devs.cBen Dooks2005-10-281-10/+10
| | | | | | | | | | | | | | Patch from Ben Dooks From: Guillaume GOURAT <guillaume.gourat@nexvision.fr> A number of devices have an extra byte on the end of their areas due to mis-calculating the .end field of their resources Signed-off-by: Guillaume GOURAT <guillaume.gourat@nexvision.fr> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3033/1: S3C2410 - add generic gpio_cfgpin optionsBen Dooks2005-10-281-0/+22
| | | | | | | | | | | | | | | | Patch from Ben Dooks Add generic values for the parameters to the s3c2410_gpio_cfgpin() function, so that a caller does not need to know the exact constant for the specified pin. This is very useful for the case where a driver is passed a gpio pin number and needs to reconfigure the pin's function. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2990/1: Replace map_desc.physical with map_desc.pfn: S3C2410Deepak Saxena2005-10-281-1/+1
| | | | | | | | | Patch from Deepak Saxena S3C2410 map_desc.pfn conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3027/1: BAST - reduce NAND timings slightlyBen Dooks2005-10-201-3/+3
| | | | | | | | | | | | Patch from Ben Dooks The current Simtec BAST nand area timings are a little too slow to be obtained by a 2410 running at 266MHz, so reduce the timings slightly to bring them into the acceptable range. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3018/1: S3C2410 - check de-referenced device is really a platform deviceBen Dooks2005-10-181-1/+4
| | | | | | | | | | | | | Patch from Ben Dooks Check that the device we are looking at is really a platform device before trying to cast it to one to find out the platform bus number. Thanks to RMK for pointing this out. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3007/1: BAST - add CONFIG_ISA to buildBen Dooks2005-10-131-0/+1
| | | | | | | | | | | Patch from Ben Dooks The Simtec EB2410ITX (BAST) has a PC/104 slot, and therefore we should enable CONFIG_ISA to allow the drivers for ISA peripherals to be selected Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixesBen Dooks2005-10-132-5/+2
| | | | | | | | | | | Patch from Ben Dooks Remove an unused variable from s3c2410.c and ensure that items not needed to be exported from s3c2440.c are declared static. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2979/2: S3C2410 - add static to non-exported machine itemsBen Dooks2005-10-123-4/+4
| | | | | | | | | | Patch from Ben Dooks Do not export items that are not needed by symbol name elsewhere Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2975/1: S3C2410: time.c missing include of cpu.hBen Dooks2005-10-121-0/+1
| | | | | | | | | | | | Patch from Ben Dooks arch/arm/mach-s3c2410/time.c is missing include of cpu.h, causing the declaration of the timer struct (s3c24xx_timer) to be flagged as missing the declaration. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Don't include mach-types.h unnecessarilyRussell King2005-09-291-1/+0
| | | | | | | | | It's pointless to include mach-types.h if you're not going to use anything from it. These references were removed as a result of: grep -lr 'asm/mach-types\.h' . | xargs grep -L 'machine_is_\|MACH_TYPE_\|MACHINE_START\|machine_type' Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2928/1: S3C2410 - make machine init code staticBen Dooks2005-09-2010-17/+24
| | | | | | | | | Patch from Ben Dooks This code is not being exported, declare it static Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] s3c2410fb: Platform support for ARM S3C2410 framebuffer driverArnaud Patard2005-09-092-1/+61
| | | | | | | | | | | | This patch add the plateform specific stuff needed to configure and use the driver. Signed-Off-By: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Dooks <ben@trinity.fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SERIAL] Use an enum for serial8250 platform device IDsRussell King2005-09-082-2/+2
| | | | | | | | Rather than hard-coding the platform device IDs, enumerate them. We don't particularly care about the actual ID we get, just as long as they're unique. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2884/1: BAST - fix PC104 IRQ routingBen Dooks2005-09-073-18/+71
| | | | | | | | | | | | Patch from Ben Dooks This has been broken for a while now, so fix the problems with the code, test and bring up to date. This also makes the code conditional on an Kconfig option Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2889/1: S3C2410 - Add machine AnubisBen Dooks2005-09-075-2/+280
| | | | | | | | | | | | | Patch from Ben Dooks Add the Simtec Anubis to the list of supported machines in the arch/arm/mach-s3c2410 directory. This ensures the core peripherals are registered, the timer source is configured and the correct power-management is enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2876/1: N30 - remove task to toggle USB D+ lineBen Dooks2005-09-051-20/+10
| | | | | | | | | | | | | | Patch from Ben Dooks The n30 machine file is using a kernel thread to change the state of the USB D+ pull-up resistor, which is not the proper way to do this. Once the usb-gadget support for the 24xx is merge, the proper access method will be added. This patch also removes the problem of using HZ for the msleep calls, from Nishanth Aravamudan. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Wrap calls to descriptor handlersRussell King2005-09-043-10/+10
| | | | | | | | | | This is part of Thomas Gleixner's generic IRQ patch, which converts ARM to use the generic IRQ subsystem. Here, we wrap calls to desc->handler() in an inline function, desc_handle_irq(). This reduces the size of Thomas' patch since the changes become more localised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Change irq_chip wake/type methods to set_wake/set_typeRussell King2005-09-041-6/+6
| | | | | | | | This is part of Thomas Gleixner's generic IRQ patch, which converts ARM to use the generic IRQ subsystem. Here, we rename two of the irq_chip methods - wake becomes set_wake, and type becomes set_type. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2874/1: S3C2410 - add cpu_init() call after sleep wakeupBen Dooks2005-09-031-2/+4
| | | | | | | | | | | | | Patch from Ben Dooks The power management sleep code needs to call cpu_init() to restore the cpu state after the system resumes from suspend. Also clear off an un-necessary comment. Thanks to Dimitry Andric for reporting the bug and for rmk for pointing out the cause. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2856/1: S3C2440 - show DVS status at startupBen Dooks2005-08-291-2/+4
| | | | | | | | | | Patch from Ben Dooks Show the state of DVS (Dynamic Voltage Scaling) when starting up on the S3C2440 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2855/1: S3C2410 - add CLKSLOW definitions, and show in initBen Dooks2005-08-291-0/+9
| | | | | | | | | | | Patch from Ben Dooks Add the definitions for the S3C2410_CLKSLOW registers to the header files, and show the values when the system starts up Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 2850/1: Remove duplicate UART I/O mapping from s3c2410_iodescDimitry Andric2005-08-171-2/+2
| | | | | | | | | | | | | | | | Patch from Dimitry Andric This patch removes the initial UART I/O mapping from s3c2410_iodesc, since the same mapping is already done in the function s3c24xx_init_io in the file arch/arm/mach-s3c2410/cpu.c, through the s3c_iodesc array. I'm not sure if duplicate mappings do any harm, but it's simply redundant. Also, in s3c2440.c the UART I/O mapping is NOT done. Additionally, I put a comma behind the last mapping, to ease copy/pasting stuff around, and make the style consistent with s3c2440.c and other files. Signed-off-by: Dimitry Andric <dimitry@andric.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2849/1: S3C24XX - USB host update (2848/1)Ben Dooks2005-08-101-5/+13
| | | | | | | | | | | | | Patch from Ben Dooks Rename the s3c2410_report_oc() to s3c2410_usb_report_oc() as this is an usb specific function. Change port power on the usb-simtec implementation to only power up the output if both are set, as per the usb 1.1 specification Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2832/1: BAST - limit clock-rate for IIC busBen Dooks2005-08-031-1/+15
| | | | | | | | | | | | Patch from Ben Dooks The default clock rate does not specify a maximum, so the default of 400KHz is used. This rate is too fast for the PMU on the EB2410ITX, so we now specify platform data with a rate of around 100KHz. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2831/1: S3C2440 - split s3c2440 clocks from central clock codeBen Dooks2005-07-263-57/+117
| | | | | | | | | | Patch from Ben Dooks Split the s3c2440 specific clocks from the arch clock support, to make the code clearer. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2829/1: S3C2410 - split s3c2440 irq specifics from core irq.cBen Dooks2005-07-264-255/+312
| | | | | | | | | | | Patch from Ben Dooks Remove the need for the #ifdefs and place the IRQ handling code for the s3c2440 into a new file, which is only compiled when the s3c2440 cpu support is enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [PATCH] ARM: 2828/1: BAST - remove static map of ASIX areaBen Dooks2005-07-261-8/+5
| | | | | | | | | | | Patch from Ben Dooks There is no point in mapping this staticaly, the driver is going to ioremap() the area as it sees fit. Also correct the dates on the changelog comments Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2005-07-231-0/+37
|\
OpenPOWER on IntegriCloud