summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/include
Commit message (Collapse)AuthorAgeFilesLines
* [ARM] pxa/palm27x: General fix for Palm27x aSoC driverMarek Vasut2009-04-191-6/+1
| | | | | | | | | Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* [ARM] pxa: merge AC97 platform data structuresMark Brown2009-04-151-0/+10
| | | | | | | | | | | | | | | | | Currently there are two possible platform datas for the PXA AC97 driver: one supported by the generic AC97 driver only which provides callbacks to allow board-specific configuration at stream startup and teardown, and another for pxa2xx-ac97-lib which allows configuration of the reset GPIO for PXA2xx CPUs. Obviously this won't actually work when using the generic AC97 driver since the drivers will attempt to parse the platform data in both formats. Fix this by merging the two structures. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* [ARM] pxa: PalmTX and PalmT5 USB fixesMarek Vasut2009-04-132-2/+0
| | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* [ARM] pxa/colibri: fix missing variable name in inline functionsEric Miao2009-04-091-2/+2
| | | | | | | | Even they are empty inline functions, the compiler still complains about the missing variable names. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Daniel Mack <daniel@caiaq.de>
* Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2009-04-086-2/+81
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array [ARM] 5445/1: AT91: Remove flexible array from USBH platform data [ARM] 5447/1: Add SZ_32K [ARM] omap: fix omap1 clock usecount decrement bug [ARM] pxa: register AC97 controller devices [ARM] pxa/csb701: do not register devices on non-csb726 boads [ARM] pxa/colibri: get rid of set_irq_type() [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL [ARM] pxa/cm-x2xx: fix ucb1400 not being registered [ARM] pxa: Add support for suspend on PalmTX, T5 and LD [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight [ARM] pxa: Palm Tungsten E2 basic support [ARM] pxa/em-x270: add libertas device registration [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
| * [ARM] pxa/colibri: get rid of set_irq_type()Daniel Mack2009-04-041-0/+3
| | | | | | | | | | | | | | | | | | In commit 47cb035560a41bd1bd3db506eeab93088815203e, the ax88796 driver learned to take IRQ flags from platform_device definition. Use that here to get rid of the set_irq_type() hack. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * [ARM] pxa/colibri: provide MAC address from ATAG_SERIALDaniel Mack2009-04-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | In 67fca028f1535e510689d2e444b0289e264e05c1, the ax88796 ethernet driver learned a way to let the platform data hand in the MAC address. Use it here as the original Colibri bootloader passes in a MAC address via ATAG_SERIAL. Reported-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * [ARM] pxa: Add support for suspend on PalmTX, T5 and LDMarek Vasut2009-04-043-0/+4
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlightMarek Vasut2009-04-041-0/+25
| | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * [ARM] pxa: Palm Tungsten E2 basic supportMarek Vasut2009-04-041-0/+43
| | | | | | | | | | | | | | This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_powerPhilipp Zabel2009-04-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch, the bq24022 battery charger is controlled by the USB gadget framework (via gpio_vbus) when connected to USB. To compile, this patch depends on the "regulator: Allow init data to be supplied for bq24022" patch (queued for next in the regulator tree) to add the init_data field to struct bq24022_mach_info. It also depends on the "add optional OTG transceiver and voltage regulator support to pda_power" patch (queued for next in the power supply tree) to enable charging when connected to the AC charger. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common casesEric Miao2009-04-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | Most SPI peripherals use GPIOs as their chip selects, introduce .gpio_cs for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-04-061-0/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
| * [MTD] [NAND] pxa3xx_nand: add ability to keep controller settings defined by ↵Mike Rapoport2009-03-201-0/+3
| | | | | | | | | | | | | | | | OBM/bootloader Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Merge branch 'origin' into develRussell King2009-03-282-1/+21
|\ \ | | | | | | | | | | | | Conflicts: sound/soc/pxa/pxa2xx-i2s.c
| * \ Merge branch 'topic/asoc' into for-linusTakashi Iwai2009-03-242-1/+21
| |\ \ | | |/ | |/|
| | * ASoC: add two more bitfields for PXA SSPDaniel Mack2009-03-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Add two more bitfields for the PSP register. As they seem to exist for PXA3xx only, define them conditionally. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: Fix name of register bit in pxa-sspDaniel Mack2009-03-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | A bit in PXA's SSCR0 register was erroneously named ADC but its name is in fact ACS (audio clock select). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: machine support for Toshiba e740 PDAIan Molton2009-01-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: machine driver for Toshiba e800Ian Molton2009-01-161-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the wm9712 ac97 codec as used in the Toshiba e800 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * ASoC: machine driver for Toshiba e750Ian Molton2009-01-161-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the wm9705 ac97 codec as used in the Toshiba e750 PDA. It includes support for powering up / down the external headphone and speaker amplifiers on this machine. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | | Merge branch 'devel' of ↵root2009-03-2410-241/+45
|\ \ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
| * | | [ARM] pxa: move common MFP handling code into plat-pxaEric Miao2009-03-237-118/+19
| | | | | | | | | | | | | | | | Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | [ARM] pxa: move common GPIO handling code into plat-pxaEric Miao2009-03-231-31/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. add common GPIO handling code into [arch/arm/plat-pxa] 2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors should implement its own <mach/gpio.h>, provide the following required definitions and '#include <plat/gpio.h>' in the end: - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory - macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance) - NR_BUILTIN_GPIO for the number of onchip GPIO - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | [ARM] pxa: introduce plat-pxa for PXA common code and add DMA supportEric Miao2009-03-231-82/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families 2. initially moved DMA code into plat-pxa 3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors should implement its own <mach/dma.h>, provide the following required definitions and '#include <plat/dma.h>' in the end: - DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | [ARM] pxa: Add Colibri LCD functionsDaniel Mack2009-03-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds LCD functions for Colibri PXA300 and Colibri PXA320 and configures a LQ043T3DX02 panel. Original-code-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | [ARM] pxa: Refactor Colibri board support codeDaniel Mack2009-03-231-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | [ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack2009-03-231-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | [ARM] pxa: rename colibri.c to colibri-pxa270.cDaniel Mack2009-03-231-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Namespace cleanup: rename colibri.c to colibri-pxa270.c and change some names in colibri.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| * | | Merge branch 'fix' of ↵Eric Miao2009-03-232-0/+2
| |\ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git into devel
| | * | | [ARM] pxa: add pxa320 missing pin function for CS2 on GPIO3Daniel Mack2009-03-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
| | * | | [ARM] pxa: add missing pin function for CS2 on GPIO1Daniel Mack2009-03-191-0/+1
| | |/ / | | | | | | | | | | | | | | | | Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | | [ARM] pass reboot command line to arch_reset()Russell King2009-03-191-1/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | [ARM] pxa: add initial support for Cogent CSB726 boardDmitry Eremin-Solenikov2009-03-132-1/+28
| | | | | | | | | | | | | | | Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: fix typo in BANK_OFF() macro in gpio.hEric Miao2009-03-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The typo was originally fixed by Mike Rapoport and missed. And is later reported by Matthias Meier. Signed-off-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: separate definitions from pxa-regs.h and remove it finallyEric Miao2009-03-097-86/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The remaining registers are separated into: - <mach/regs-ost.h> - <mach/regs-rtc.h> - <mach/regs-intc.h> and then we can remove pxa-regs.h completely. Instead of #include this file, let's: 1. include the specific <mach/regs-*.h> with care (if that's absolutely necessary) 2. define the registers in the driver, make cleanly defined API to expose the register access to external with sufficient reason Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: move pxa2xx chip selects definitions out of pxa-regs.hEric Miao2009-03-093-12/+20
| | | | | | | | | | | | | | | | | | | | | | | | The definitions of PXA_CS<x>_PHYS are really PXA2xx specific and should be moved out of pxa-regs.h. As an illustration, the PXA3xx static chip selects definitions are added into pxa3xx-regs.h. Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.cEric Miao2009-03-092-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | This isn't perfect but at least solves the problem of pm.c's dependency on register definitions in <mach/lubbock.h>, which doesn't make much sense. Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: move PCMCIA definitions out of pxa-regs.h into pxa2xx_base.cEric Miao2009-03-091-38/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the processor specific initialization (largely resources initialization) out of soc_common_drv_pcmcia_probe() into dedicated sa11xx_drv_pcmcia_probe() and __pxa2xx_drv_pcmcia_probe(). By doing this, we are now able to move the PCMCIA related definitions out of pxa-regs.h and back into pxa2xx_base.c. As a result, remove that reference of _PCMCIA1IO in arch/arm/mach-pxa/viper.c. Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: access GPIO registers by chip so to make it further genericEric Miao2009-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's handle GPIOs by banks, each bank covers up to 32 GPIOs with one set of registers, and each set of registers start from different offsets. GPLR GPDR GPSR GPCR GRER GFER GEDR BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 NOTE: BANK 3 is only available on PXA27x and later processors. BANK 4 and 5 are only available on PXA935 1. introduce GPIO_BANK(n) for the offset base of each bank 2. 'struct pxa_gpio_chip' is expanded to include IRQ edge and mask setings, and saved register values as well, and is dynamically allocated due to possible bank number ranging from 3 to 6 3. all accesses to GPIO registers are made through 'regbase' within 'pxa_gpio_chip', and register offset 4. introduce several inline functions to simplify the code a bit 5. change IRQ demux handler to base on gpio chips Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: move declaration of 'pxa_last_gpio' into <mach/gpio.h>Eric Miao2009-03-091-1/+4
| | | | | | | | | | | | Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: move GPIO register definitions into <mach/gpio.h>Eric Miao2009-03-093-75/+73
| | | | | | | | | | | | | | | | | | | | | | | | This makes gpio.c fully independent of pxa-regs.h (except for the virtual address of the registers). Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.cEric Miao2009-03-091-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is part of the work making gpio.c generic enough, the changes include: 1. move IRQ handling of GPIO 0 and 1 outside (and back into irq.c) 2. pxa_init_gpio() accepts a range for muxed GPIO IRQs, and an IRQ number for the muxed GPIOs 3. __gpio_is_occupied() and __gpio_is_inverted() are made inline, and are moved into <mach/gpio.h> instead of generic gpio.c Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: move DMA registers definitions into <mach/dma.h>Eric Miao2009-03-092-59/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into <mach/dma.h> and make relevant drivers include it instead of <mach/pxa-regs.h>. 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: allow DMA controller IRQ being specifiedEric Miao2009-03-091-1/+1
| | | | | | | | | | | | Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usageEric Miao2009-03-098-19/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Considering the header mess ATM, it is not always possible to include the correct header files within board code. Let's keep this simple: <mach/pxa25x.h> - for pxa25x based platforms <mach/pxa27x.h> - for pxa27x based platforms <mach/pxa300.h> - for pxa300 based platforms <mach/pxa320.h> - for pxa320 based platforms <mach/pxa930.h> - for pxa930 based platforms NOTE: 1. one header one board file, they are not compatible (i.e. they have conflicting definitions which won't compile if included together). 2. Unless strictly necessary, the following header files are considered to be SoC files use _only_, and is not recommended to be included in board code: <mach/hardware.h> <mach/pxa-regs.h> <mach/pxa2xx-regs.h> <mach/pxa3xx-regs.h> <mach/mfp.h> <mach/mfp-pxa2xx.h> <mach/mfp-pxa25x.h> <mach/mfp-pxa27x.h> <mach/mfp-pxa3xx.h> <mach/mfp-pxa300.h> <mach/mfp-pxa320.h> <mach/mfp-pxa930.h> Signed-off-by: Eric Miao <eric.miao@marvell.com>
* | | Merge branch 'devel' of ssh://master.kernel.org/home/rmk/linux-2.6-arm into ↵Eric Miao2009-03-091-0/+1
|\ \ \ | | | | | | | | | | | | devel
| * | | [ARM] 5354/1: mach-pxa: add AM300 platform driver v3Jaya Kumar2009-02-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AM300 platform driver which uses the E-Ink broadsheetfb display driver. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge branch 'fix' of ↵Eric Miao2009-03-092-0/+5
|\ \ \ \ | |/ / / |/| / / | |/ / git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
| * | [ARM] pxa: make more SSCR0 bit definitions visible on multiple processorsEric Miao2009-01-191-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The only exclusive definitions are SSCR0_SCR and SSCR0_SerClkDiv(), loosen that exclusive #ifdef .. #else .. #endif to allow other definitions to be visible when slected multiple processors. This helps to pass the building of pxa-ssp.c. Signed-off-by: Eric Miao <eric.miao@marvell.com>
OpenPOWER on IntegriCloud