summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/gpmc.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND ↵Pekon Gupta2014-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | is built as module Fixes: commit 75d3625e0e86b2d8d77b4e9c6f685fd7ea0d5a96 ARM: OMAP2+: gpmc: add DT bindings for OneNAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for ONENAND driver to probe later. However this does not happen if generic MTD_ONENAND framework is built as module (CONFIG_MTD_ONENAND=m). Therefore, when MTD/ONENAND and MTD/ONENAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board ONENAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_ONENAND=y || CONFIG_MTD_ONENAND=m CC: <stable@vger.kernel.org> # 3.9.x+ Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: gpmc: fix: DT NAND child nodes not probed when MTD_NAND is ↵Pekon Gupta2014-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | built as module Fixes: commit bc6b1e7b86f5d8e4a6fc1c0189e64bba4077efe0 ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND OMAP SoC(s) depend on GPMC controller driver to parse GPMC DT child nodes and register them platform_device for NAND driver to probe later. However this does not happen if generic MTD_NAND framework is built as module (CONFIG_MTD_NAND=m). Therefore, when MTD/NAND and MTD/NAND/OMAP2 modules are loaded, they are unable to find any matching platform_device and remain un-binded. This causes on board NAND flash to remain un-detected. This patch causes GPMC controller to parse DT nodes when CONFIG_MTD_NAND=y || CONFIG_MTD_NAND=m CC: <stable@vger.kernel.org> # 3.9.x+ Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of ↵Olof Johansson2013-11-251-39/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
| * ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91xTony Lindgren2013-11-151-39/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f2bf0e72d000 (ARM: OMAP2+: Add minimal 8250 support for GPMC) added support for using bootloader timings for some devices. Turns out we can do the same by looking at the compatible flags of the child without adding a new function as smc91x has a similar issue as 8250 with the bootloader timings. And let's fix the 8250 naming, we should use the device type as the name like uart instead of 8250 for zoom dts file. Cc: "Benoît Cousson" <bcousson@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtdLinus Torvalds2013-11-141-14/+34
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD changes from Brian Norris: - Unify some compile-time differences so that we have fewer uses of #ifdef CONFIG_OF in atmel_nand - Other general cleanups (removing unused functions, options, variables, fields; use correct interfaces) - Fix BUG() for new odd-sized NAND, which report non-power-of-2 dimensions via ONFI - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.) - Improve differentiation between SLC and MLC NAND -- this clarifies an ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO ioctl), where the MTD_MLCNANDFLASH type was present but inconsistently used - Extend GPMI NAND to support multi-chip-select NAND for some platforms - Many improvements to the OMAP2/3 NAND driver, including an expanded DT binding to bring us closer to mainline support for some OMAP systems - Fix a deadlock in the error path of the Atmel NAND driver probe - Correct the error codes from MTD mmap() to conform to POSIX and the Linux Programmer's Manual. This is an acknowledged change in the MTD ABI, but I can't imagine somebody relying on the non-standard -ENOSYS error code specifically. Am I just being unimaginative? :) - Fix a few important GPMI NAND bugs (one regression from 3.12 and one long-standing race condition) - More? Read the log! * tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits) mtd: gpmi: fix the NULL pointer mtd: gpmi: fix kernel BUG due to racing DMA operations mtd: mtdchar: return expected errors on mmap() call mtd: gpmi: only scan two chips for imx6 mtd: gpmi: Use devm_kzalloc() mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected mtd: nand: use a local variable to simplify the nand_scan_tail mtd: nand: remove deprecated IRQF_DISABLED mtd: dataflash: Say if we find a device we don't support mtd: nand: omap: fix error return code in omap_nand_probe() mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES mtd: m25p80: fixup device removal failure path mtd: mxc_nand: Include linux/of.h header mtd: remove duplicated include from mtdcore.c mtd: m25p80: add support for Macronix mx25l3255e mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig mtd: nand: omap: updated devm_xx for all resource allocation and free calls mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c mtd: nand: omap: clean-up ecc layout for BCH ecc schemes mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe ...
| * ARM: OMAP2+: cleaned-up DT support of various ECC schemesPekon Gupta2013-11-061-14/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP NAND driver support multiple ECC scheme, which can used in different flavours, depending on in-build Hardware engines present on SoC. This patch updates following in DT bindings related to sectionion of ecc-schemes - ti,elm-id: replaces elm_id (maintains backward compatibility) - ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme depends on ti,elm-id. (supported values ham1, bch4, and bch8) - maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode) Below table shows different flavours of ecc-schemes supported by OMAP devices +---------------------------------------+---------------+---------------+ | ECC scheme |ECC calculation|Error detection| +---------------------------------------+---------------+---------------+ |OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W | |(requires CONFIG_MTD_NAND_ECC_BCH) | | | +---------------------------------------+---------------+---------------+ |OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) | |(requires CONFIG_MTD_NAND_OMAP_BCH && | | | | ti,elm-id in DT) | | | +---------------------------------------+---------------+---------------+ To optimize footprint of omap2-nand driver, selection of some ECC schemes also require enabling following Kconfigs, in addition to setting appropriate DT bindings - Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software - Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | ARM: OMAP2+: Add minimal 8250 support for GPMCTony Lindgren2013-10-111-0/+38
|/ | | | | | | | | | | Just initialize things using the bootloader timings like we've been doing for the legacy booting too. It should be possible to patch in the GPMC timings for the based on the TL16CP743C/TL16C754C manual at: http://www.ti.com/lit/ds/slls644g/slls644g.pdf Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=yFabio Estevam2013-09-181-2/+2
| | | | | | | | | | | | | | When CONFIG_ARM_LPAE=y the following build warning is generated: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] According to Documentation/printk-formats.txt '%pa' can be used to properly print 'resource_size_t'. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start'Chen Gang2013-08-221-1/+1
| | | | | | | | | | | | | 'gpmc_irq_start' is mostly used as 'int', and for a variable, do not suggest to only use 'unsigned' as its type, so use 'int' instead of 'unsigned' for variable 'gpmc_irq_start'. Also it will fix the related issue (dummy the real world failure): arch/arm/mach-omap2/gpmc.c:728:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"Thomas Meyer2013-07-041-1/+1
| | | | | | | | Cocci spatch "ptr_ret.spatch" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: gpmc: Low power transition supportavinash philip2013-06-181-2/+19
| | | | | | | | | | | | | GPMC is hardware controller for external memory interfaces. This patch adds suspend/resume support for GPMC driver. It also preserves GPMC register configurations across device low-power states in which GPMC hardware can be powered-off. gpmc_suspend()/gpmc_resume() are called by default by core PM framework as part of driver's runtime PM callbacks. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: gpmc: Converts GPMC driver to pm_runtime capableavinash philip2013-06-121-2/+6
| | | | | | | | Support for pm_runtime add to GPMC driver. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: gpmc: get number of useable GPMC chip-selects via DTGupta Pekon2013-06-121-9/+29
| | | | | | | | | | | | | | | | | | | This patch enables usage of DT property 'gpmc,num-cs' as already documented in Documentation/devicetree/bindings/bus/ti-gpmc.txt Though GPMC hardware supports upto 8 chip-selects, but all chip-selects may not be available for use because: - chip-select pin may not be bonded out at SoC device boundary. - chip-select pin-mux may conflict with other pins usage. - board level constrains. gpmc,num-cs allows user to configure maximum number of GPMC chip-selects available for use on any given platform. This ensures: - GPMC child nodes having chip-selects within allowed range are only probed. - And un-used GPMC chip-selects remain blocked.(may be for security reasons). Signed-off-by: Gupta, Pekon <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: OMAP2+: Simplify NAND supportJon Hunter2013-05-161-1/+0
| | | | | | | | | | | | | | Commit 8c8a777 (ARM: OMAP2+: Add function to read GPMC settings from device-tree) added a device-tree property "gpmc,device-nand" to indicate is the GPMC child device is NAND. This commit should have updated the GPMC NAND documentation (Documentation/devicetree/bindings/mtd/gpmc-nand.txt) to list the property "gpmc,device-nand" as a required property and also updated the example. However, this property is redundant and not needed because the GPMC child device node for NAND is called "nand". Therefore, remove this property. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Allow NAND transfer mode to be specified in DTMark Jackson2013-05-161-0/+14
| | | | | | | | | | | | OMAP devices support various NAND transfer modes. Currently all device-tree definitions will use the default "prefetch polled" mode, so this patch enables the transfer mode to be specified in the device-tree. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> Acked-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: only WARN if a GPMC child probe function failJavier Martinez Canillas2013-04-301-3/+2
| | | | | | | | | If any of the GPMC child nodes fails, this shouldn't make the whole gpmc_probe_dt() function to fail. It is better to just WARN and allow other devices probe function to succeed. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: OMAP2+: only search for GPMC DT child nodes on probeJavier Martinez Canillas2013-04-301-23/+10
| | | | | | | | | | | | | | | | | | | The GPMC DT probe function use for_each_node_by_name() to search child device nodes of the GPMC controller. But this function does not use the GPMC device node as the root of the search and instead search across the complete Device Tree. This means that any device node on the DT that is using any of the GPMC child nodes names searched for will be returned even if they are not connected to the GPMC, making the gpmc_probe_xxx_child() function to fail. Fix this by using the GPMC device node as the search root so the search will be restricted to its children. Reported-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: OMAP2+: Add GPMC DT support for Ethernet child nodesJavier Martinez Canillas2013-04-031-0/+8
| | | | | | | | | | | | | Besides being used to interface with external memory devices, the General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices such as ethernet controllers to OMAP2+ processors using the TI GPMC as a data bus. This patch allows an ethernet chip to be defined as an GPMC child device node. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: OMAP2+: rename gpmc_probe_nor_child() to gpmc_probe_generic_child()Javier Martinez Canillas2013-04-031-5/+5
| | | | | | | | | | | | | | The gpmc_probe_nor_child() function is used in the GPMC driver to configure the GPMC for a NOR child device node. But this function is quite generic and all the NOR specific configuration is made by the driver of the actual NOR flash memory used. Other Pseudo-SRAM devices such as ethernet controllers need a similar setup so by making this function generic it can be used for those too. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: OMAP2+: return -ENODEV if GPMC child device creation failsJavier Martinez Canillas2013-04-031-0/+1
| | | | | | | | | | | | | | | | gpmc_probe_nor_child() calls of_platform_device_create() to create a platform device for the NOR child. If this function fails the value of ret is returned to the caller but this value is zero since it was assigned the return of a previous call to gpmc_cs_program_settings() that had to succeed or otherwise gpmc_probe_nor_child() would have returned before. This means that if of_platform_device_create() fails, 0 will be returned to the caller instead of an appropriate error code. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping failsJon Hunter2013-04-031-17/+7
| | | | | | | | | | | | | | | | | | | | When the GPMC driver is probed, we call gpmc_mem_init() to see which chip-selects have already been configured and enabled by the boot-loader and allocate space for them. If we fail to allocate space for one chip-select, then we return failure from the probe and the GPMC driver will not be available. Rather than render the GPMC useless for all GPMC devices, if we fail to allocate space for one chip-select print a warning and disable the chip-select. This way other GPMC clients can still be used. There is no downside to this approach, because all GPMC clients need to request a chip-select before they can use the GPMC and on requesting a chip-select, if memory has not already been reserved for the chip-select then it will be. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Remove unnecesssary GPMC definitions and variableJon Hunter2013-04-031-7/+5
| | | | | | | | | | With commit 21cc2bd (ARM: OMAP2+: Remove apollon board support) the variable "boot_rom_space" is now not needed and the code surrounding this variable can be cleaned up and simplified. Remove unnecessary definitions and clean-up the comment as well. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Detect incorrectly aligned GPMC base addressJon Hunter2013-04-031-3/+19
| | | | | | | | | | | | | Each GPMC chip-select can be configured to map 16MB, 32MB, 64MB or 128MB of address space. The physical base address where a chip-select starts is also configurable and must be aligned on a boundary that is equal to or greater than the size of the address space mapped bt the chip-select. When enabling a GPMC chip-select, ensure that the base address is aligned to the appropriate boundary. Reported-by: Mark Jackson <mpfj-list@mimc.co.uk> Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Add device-tree support for NOR flashJon Hunter2013-04-031-0/+115
| | | | | | | | | | | NOR flash is not currently supported when booting with device-tree on OMAP2+ devices. Add support to detect and configure NOR devices when booting with device-tree. Add documentation for the TI GPMC NOR binding. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Add additional GPMC timing parametersJon Hunter2013-04-031-47/+47
| | | | | | | | | | | | | | | | | | | | | | Some of the GPMC timings parameters are currently missing from the GPMC device-tree binding. Add these parameters to the binding documentation as well as code to read them. Also add either "-ps" or "-ns" suffix to the GPMC timing properties to indicate whether the timing is in picoseconds or nanoseconds. The existing code in gpmc_read_timings_dt() is checking the value of of_property_read_u32() and only is successful storing the value read in the gpmc_timings structure. Checking the return value in this case is not necessary and we can simply read the value, if present, and store directly in the gpmc_timings structure. Therefore, simplify the code by removing these checks. The comment in the gpmc_read_timings_dt() function, "only for OMAP3430" is also incorrect as it is applicable to all OMAP3+ devices. So correct this too. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Add function to read GPMC settings from device-treeJon Hunter2013-04-011-0/+40
| | | | | | | | | | | Adds a function to read the various GPMC chip-select settings from device-tree and store them in the gpmc_settings structure. Update the GPMC device-tree binding documentation to describe these options. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()Jon Hunter2013-04-011-42/+7
| | | | | | | | | | With the addition of the gpmc_cs_program_settings(), we no longer need or use gpmc_cs_configure() to configure some of the GPMC chip-select options. So rename the function to gpmc_configure() and remove code that modifies options in the CONFIG1 register. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Add function for configuring GPMC settingsJon Hunter2013-04-011-0/+100
| | | | | | | | | | | | | | | | | | | The GPMC has various different configuration options such as bus-width, synchronous or asychronous mode selection, burst mode options etc. Currently, there is no common function for configuring these options and various devices set these options by either programming the GPMC CONFIG1 register directly or by calling gpmc_cs_configure() to set some of the options. Add a new function for configuring all of the GPMC options. Having a common function for configuring this options will simplify code and ease the migration to device-tree. Also add a new capability flag to detect devices that support the address-address-data multiplexing mode. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Add structure for storing GPMC settingsJon Hunter2013-04-011-18/+27
| | | | | | | | | | | | | | | The GPMC has various different configuration options such as bus-width, synchronous or asychronous mode selection, burst mode options etc. Currently, there is no central structure for storing all these options when configuring the GPMC for a given device. Some of the options are stored in the GPMC timing structure and some are directly programmed into the GPMC configuration register. Add a new structure to store these options and convert code to use this structure. Adding this structure will allow us to create a common function for configuring these options. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: OMAP2+: Add variable to store number of GPMC waitpinsJon Hunter2013-04-011-0/+13
| | | | | | | | | | | | | | | | | The GPMC has wait-pin signals that can be assigned to a chip-select to monitor the ready signal of an external device. Add a variable to indicate the total number of wait-pins for a given device. This will allow us to detect if the wait-pin being selected is valid or not. When booting with device-tree read the number of wait-pins from the device-tree blob. When device-tree is not used set the number of wait-pins to 4 which is valid for OMAP2-5 devices. Newer devices that have less wait-pins (such as AM335x) only support booting with device-tree and so hard-coding the wait-pin number when not using device-tree is fine. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
* ARM: omap2: gpmc: Remove redundant chip select out of range checkEzequiel Garcia2013-04-011-9/+1
| | | | | | | | | | This check is done before the call to gpmc_cs_reserved() and gpmc_cs_set_reserved() and it's redundant to do it again in each function. This simplifies the code a bit. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: omap2: gpmc: Fix gpmc_cs_reserved() return valueEzequiel Garcia2013-04-011-2/+2
| | | | | | | | | | | | | | | Currently gpmc_cs_reserved() return value is somewhat inconsistent, returning a negative value on an error condition, a positive value if the chip select is reserved and zero if it's available. Fix this by returning a boolean value as the function name suggests: * true if the chip select is reserved, * false if it's available Suggested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: omap2: gpmc: Remove unused gpmc_round_ns_to_ticks() functionEzequiel Garcia2013-04-011-7/+0
| | | | | | | | | This function is not used anywhere, so it's safe to remove it. This means less code to maintain. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: omap2: gpmc: Mark local scoped functions staticEzequiel Garcia2013-04-011-7/+7
| | | | | | | | | This patch marks a bunch of functions that are local to gpmc.c file only as static. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* ARM: OMAP: Clear GPMC bits when applying new setting.Mark Jackson2013-04-011-0/+4
| | | | | | | | | | | | | | | | | When setting the GPMC device type, make sure any previous bits are cleared down, before applying the new setting. For OMAP4+ devices MUXADDDATA is a 2-bit field (bits 9:8) where as for OMAP2/3 devices it was only a one bit field (bit 9). For OMAP2/3 devices bit 8 is reserved and the OMAP documentation says to write a 0 to this bit. So clearing bit 8 on OMAP2/3 devices should not be a problem. Hence update the code to handle both bits 8 and 9 for all devices. Signed-off-by: Mark Jackson <mpfj@newflow.co.uk> [jon-hunter@ti.com: updated changelog] Signed-off-by: Jon Hunter <jon-hunter@ti.com>
* Merge commit '31d9adca82ce65e5c99d045b5fd917c702b6fce3' into tmpJon Hunter2013-04-011-12/+237
|\ | | | | | | | | Conflicts: arch/arm/plat-omap/dmtimer.c
| * ARM: OMAP2+: Fix broken gpmc supportJon Hunter2013-03-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6797b4fe (ARM: OMAP2+: Prevent potential crash if GPMC probe fails) added code to ensure that GPMC chip-selects could not be requested until the device probe was successful. The chip-selects should have been unreserved at the end of the probe function, but the code to unreserve them appears to have ended up in the gpmc_calc_timings() function and hence, this is causing problems requesting chip-selects. Fix this merge error by unreserving the chip-selects at the end of the probe, but before we call the gpmc child probe functions (for device-tree) which request a chip-select. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Philip Avinash <avinashphilip@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> [tony@atomide.com: updated description to add breaking commit id] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-3/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC board specific changes from Arnd Bergmann: "These updates are all for board specific code, including - defconfig updates for shmobile, davinci, bcm2835, imx, omap and tegra - SD/MMC and I2C support on bcm2835 (Raspberry PI) - minor updates for PXA - shmobile updates to GPIO usage in board files - More things in OMAP board files are moved over to device tree probing - Better support for audio devices on some OMAP platforms" * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: imx_v4_v5_defconfig: Add VPU support ARM: imx: configs: enable netfilter support ARM: OMAP2+: Fix twl section warnings related to omap_twl4030_audio_init ARM: OMAP2+: omap2plus_defconfig: enable omap1 rtc RX-51: Register twl4030-madc device RX-51: Add leds lp5523 names from Maemo 5 2.6.28 kernel ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers ARM: OMAP1: nokia770: enable CBUS/Retu ARM: OMAP2+: omap2plus_defconfig: enable CMA allocator ARM: OMAP2+: omap2plus_defconfig: enable TFP410 chip support ARM: OMAP3: igep0020: simplify GPIO LEDs dependencies ARM: OMAP2+: craneboard: support the TPS65910 PMU ARM: OMAP2+: craneboard: support NAND device ARM: OMAP3: cm-t3517: add MMC support ARM: OMAP2+: Remove apollon board support ARM: shmobile: armadillo800eva: set clock rates before timer init ARM: tegra: defconfig updates ARM: shmobile: mackerel: Use gpio_request_one() ARM: shmobile: kzm9g: Use gpio_request_one() ARM: shmobile: bonito: Use gpio_request_one() ...
| | * ARM: OMAP2+: Remove apollon board supportKyungmin Park2013-02-011-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | As apollon board doesn't used anymore, remove it. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [tony@atomide.com: dropped uncompress.h changes, it's gone] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
| | * | ARM: OMAP2+: omap_device: remove obsolete pm_lats and early_device codePaul Walmsley2013-01-261-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove now-obsolete code from arch/arm/mach-omap2/omap_device.c. This mostly consists of removing the first attempt at device PM latency handling. This was never really used, has been replaced by the common dev_pm_qos code, and needs to go away as part of the DT conversion. Also, the early platform_device creation code has been removed, as it appears to be unused. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
| * | Merge tag 'multiplatform' of ↵Linus Torvalds2013-02-211-2/+2
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform support from Arnd Bergmann: "Converting more ARM platforms to multiplatform support. This time, OMAP gets converted, which is a major step since this is by far the largest platform in terms of code size. The same thing happens to the vt8500 platform." * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: net: cwdavinci_cpdma: export symbols for cpsw remoteproc: omap: depend on OMAP_MBOX_FWK [media] davinci: do not include mach/hardware.h ARM: OMAP2+: Make sure files with omap initcalls include soc.h ARM: OMAP2+: Include soc.h to drm.c to fix compiling ARM: OMAP2+: Fix warning for hwspinlock omap_postcore_initcall ARM: multi_v7_defconfig: add ARCH_ZYNQ ARM: multi_v7_defconfig: remove unnecessary CONFIG_GPIOLIB arm: vt8500: Remove remaining mach includes arm: vt8500: Convert debug-macro.S to be multiplatform friendly arm: vt8500: Remove single platform Kconfig options ARM: OMAP2+: Remove now obsolete uncompress.h and debug-macro.S ARM: OMAP2+: Add minimal support for booting vexpress ARM: OMAP2+: Enable ARCH_MULTIPLATFORM support ARM: OMAP2+: Disable code that currently does not work with multiplaform ARM: OMAP2+: Add multiplatform debug_ll support ARM: OMAP: Fix dmaengine init for multiplatform ARM: OMAP: Fix i2c cmdline initcall for multiplatform ARM: OMAP2+: Use omap initcalls ARM: OMAP2+: Limit omap initcalls to omap only on multiplatform kernels
| | * | ARM: OMAP2+: Use omap initcallsTony Lindgren2013-01-111-2/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way the initcalls don't run on other SoCs on multiplatform kernels. Otherwise we'll get something like this when booting on vexpress: omap_hwmod: _ensure_mpu_hwmod_is_setup: MPU initiator hwmod mpu not yet registered ... WARNING: at arch/arm/mach-omap2/pm.c:82 _init_omap_device+0x74/0x94() _init_omap_device: could not find omap_hwmod for mpu ... omap-dma-engine omap-dma-engine: OMAP DMA engine driver ... Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2013-02-211-1/+231
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC driver specific changes from Arnd Bergmann: - Updates to the ux500 cpufreq code - Moving the u300 DMA controller driver to drivers/dma - Moving versatile express drivers out of arch/arm for sharing with arch/arm64 - Device tree bindings for the OMAP General Purpose Memory Controller * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: OMAP2+: gpmc: Add device tree documentation for elm handle ARM: OMAP2+: gpmc: add DT bindings for OneNAND ARM: OMAP2+: gpmc-onenand: drop __init annotation mtd: omap-onenand: pass device_node in platform data ARM: OMAP2+: Prevent potential crash if GPMC probe fails ARM: OMAP2+: gpmc: Remove unneeded of_node_put() arm: Move sp810.h to include/linux/amba/ ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs ARM: OMAP: gpmc-nand: drop __init annotation mtd: omap-nand: pass device_node in platform data ARM: OMAP: gpmc: don't create devices from initcall on DT dma: coh901318: cut down on platform data abstraction dma: coh901318: merge header files dma: coh901318: push definitions into driver dma: coh901318: push header down into the DMA subsystem dma: coh901318: skip hard-coded addresses dma: coh901318: remove hardcoded target addresses dma: coh901318: push platform data into driver dma: coh901318: create a proper platform data file ...
| | * | ARM: OMAP2+: gpmc: add DT bindings for OneNANDEzequiel Garcia2013-02-011-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device tree bindings for OMAP OneNAND devices. Tested on an OMAP3 3430 IGEPv2 board. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP2+: Prevent potential crash if GPMC probe failsJon Hunter2013-02-011-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the GPMC probe fails, devices that use the GPMC (such as ethernet chips, flash memories, etc) can still allocate a GPMC chip-select and register the device. On the OMAP2420 H4 board, this was causing the kernel to crash after the gpmc probe failed and the board attempted to start networking. Prevent this by marking all the chip-selects as reserved by default and only make them available for devices to request if the GPMC probe succeeds. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP2+: gpmc: Remove unneeded of_node_put()Ezequiel Garcia2013-02-011-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | for_each_node_by_name() automatically calls of_node_put() on each node passed; so don't do it explicitly unless there's an error. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: gpmc: add DT bindings for GPMC timings and NANDDaniel Mack2013-01-151-0/+173
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic DT bindings for OMAP GPMC. The actual peripherals are instantiated from child nodes within the GPMC node, and the only type of device that is currently supported is NAND. Code was added to parse the generic GPMC timing parameters and some documentation with examples on how to use them. Successfully tested on an AM33xx board. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [tony@atomide.com: updated to apply] Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: gpmc: don't create devices from initcall on DTDaniel Mack2013-01-141-0/+7
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | On DT driven boards, the gpmc node will match the driver. Hence, there's no need to do that unconditionally from the initcall. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: Convert to devm_ioremap_resource()Thierry Reding2013-01-251-5/+3
| |/ | | | | | | | | | | | | | | | | Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud