summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/control.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: control: new APIs to configure boot address and modeOmar Ramirez Luna2012-06-181-0/+43
| | | | | | | | | | | | | | | | | | | SCM contains boot addr and boot mode registers to control other processors on different OMAP versions. It controls the boot address and mode for DSP based subsystems like: IVA 2.1 (OMAP2430), IVA 2.2 (OMAP3) and DSP (OMAP4). If contained within SCM registers, when a processor is booting it uses BOOTADDR to start running the code at that location. BOOTMOD register specifies a different set of modes for the processor to execute when booting (from direct, idle, self-loop, user and default). Since there was no offset associated with OMAP4, this patch defines it. Signed-off-by: Omar Ramirez Luna <omar.luna@linaro.org> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: Fix build error after mergeTony Lindgren2012-03-071-0/+1
| | | | | | | | | | | | | | | | | | Commit 9890ce44 (ARM: get rid of asm/irq.h in asm/prom.h) removed include of asm/irq.h in asm/prom.h. This commit together with recent omap cleanup to remove io.h causes build breakage: arrch/arm/mach-omap2/control.c: In function 'omap3_ctrl_write_boot_mode': arch/arm/mach-omap2/control.c:238: error: 'OMAP343X_CTRL_BASE' undeclared (first use in this function) ... Fix this by including hardware.h directly where needed instead of relying on asm/irq.h in asm/prom.h. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Move most of plat/io.h into local iomap.hTony Lindgren2012-02-241-1/+2
| | | | | | | | | | | | There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: 7159/1: OMAP: Introduce local common.h filesTony Lindgren2011-11-171-1/+1
| | | | | | | | | | | As suggested by Russell King - ARM Linux <linux@arm.linux.org.uk>, there's no need to keep local prototypes in non-local headers. Add mach-omap1/common.h and mach-omap2/common.h and move the local prototypes there from plat/common.h and mach/omap4-common.h. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: OMAP: Move set_globals initialization to happen in init_earlyTony Lindgren2011-10-191-10/+4
| | | | | | | | | | Otherwise we can't do generic map_io as we currently rely on static mappings that work only because of arch_ioremap. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: pm: omap34xx: remove get_*_restore_pointer functions, directly use ↵Kevin Hilman2011-06-241-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | entry points Upon return from off-mode, the ROM code jumps to a restore function saved in the scratchpad. Based on SoC revision or errata, this restore entry point is different. Current code uses some helper functions in sleep34xx.S (get_*_restore_pointer) to get the restore function entry point. When returning from off-mode, this code is executed from SDRAM, so there's no reason to use these helper functions when using the SDRAM entry points directly would work just fine. This patch uses ENTRY/ENDPROC to create "real" entry points for these functions, and uses those values directly when writing the scratchpad. Tested all three entry points - restore_es3: 3430/n900 - restore_3630: 3630/Zoom3 - restore: 3530/Overo Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* OMAP3: PM: Do not rely on ROM code to restore CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLLEduardo Valentin2011-04-201-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per OMAP3 erratum (i671), ROM code adds extra latencies while restoring CM_AUTOIDLE_PLL register, if AUTO_PERIPH_DPLL is equal to 1. This patch stores 0's in scratchpad content area corresponding to AUTO_PERIPH_DPLL, to prevent ROM code to try to lock per DPLL, since it won't respect proper programing scheme. This register is then stored in prcm context. The saving and restore is now done by kernel side. Here follow the erratum description DESCRIPTION After OFF mode transition, among many restorations, the ROM Code restores the CM_AUTOIDLE_PLL register, and after that, it tries to relock the PER DPLL. In case the restoration data stored in scratchpad memory contains a field CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL = 1, then the way the ROM Code restores and locks the PER DPLL does not respect the PER DPLL programming scheme. In that case, the DPLL might not lock. Meanwhile, when trying to lock the PER DPLL, the ROM Code does not hang. Only extra latencies are introduced at wake-up. WORKAROUND When saving the context-restore structure in scratchpad memory, in order to respect the PER DPLL programming scheme, it is advised to store 0 in the CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL field of the saved structure. After wake-up, the application should store in CM_AUTOIDLE_PLL register the right desired value. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2+: PM: Fix the saving of CM_AUTOIDLE_PLL register on scratchpad areaEduardo Valentin2011-04-201-1/+1
| | | | | | | | | | | | The saving of CCR.CM_AUTOIDLE_PLL is done in scratchpad area. However, in current code, the saving is done for CM_AUTOIDLE2_PLL (offset 0x34) instead of CM_AUTOIDLE_PLL (offset 0x30). This patch changes the code to save the correct register. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3: control/PM: move padconf save code to mach-omap2/control.cPaul Walmsley2010-12-211-0/+31
| | | | | | | | | | | | | | | | | | | | | | Move the padconf save code from pm34xx.c to the System Control Module code in mach-omap2/control.c. This is part of the general push to move direct register access from middle-layer core code to low-level core code, so the middle-layer code can be abstracted to work on multiple platforms and cleaned up. In the medium-to-long term, this code should be called by the mux layer code, not the PM idle code. This is because, according to the TRM, saving the padconf only needs to be done when the padconf changes[1]. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x [Rev. ZH] [SWPU222H] Section 4.11.4 "Device Off-Mode Sequences"
* OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_"Paul Walmsley2010-12-211-19/+21
| | | | | | | | | | | | | | | | Now that OMAP4-specific PRCM functions have been added, distinguish the existing OMAP2/3-specific PRCM functions by prefixing them with "omap2_". This patch should not result in any functional change. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
* OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley2010-12-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP3: control/PRCM: move CONTROL_PADCONF_SYS_NIRQ save/restore to SCM codePaul Walmsley2010-12-211-0/+5
| | | | | | | | | | | | | | | | | | | | | For some reason, the PRCM context save/restore code also saves and restores a single System Control Module register, CONTROL_PADCONF_SYS_NIRQ. This is probably just an error -- the register should be handled by SCM code -- so this patch moves it there. If this register really does need to be saved and restored before the rest of the PRCM registers, the code to do so should live in the SCM code, and the PM code should call this separate function. This register pertains to devices with a stacked modem, so this patch is unlikely to affect most OMAP devices out there. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
* OMAP3: control/PRCM: add omap3_ctrl_write_boot_mode()Paul Walmsley2010-12-211-0/+31
| | | | | | | | | | | | | | | | Get rid of the open-coded scratchpad write in mach-omap2/prcm.c and replace it with an actual API, omap3_ctrl_write_boot_mode(). While there, get rid of the gratuitous omap_writel(). There's not much documentation available for what should wind up in the scratchpad here, so more documentation would be appreciated. Also, at some point, we should formalize our treatment of the scratchpad; right now, accesses to the scratchpad are not well-documented. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* OMAP3: rework of the ASM sleep code execution pathsJean Pihet2010-12-211-1/+8
| | | | | | | | | | | | | | | | - Reworked and simplified the execution paths for better readability and to avoid duplication of code, - Added comments on the entry and exit points and the interaction with the ROM code for OFF mode restore, - Reworked the existing comments for better readability. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3630: PM: Erratum i608: disable RTANishanth Menon2010-12-211-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | Erratum id: i608 RTA (Retention Till Access) feature is not supported and leads to device stability issues when enabled. This impacts modules with embedded memories on OMAP3630 Workaround is to disable RTA on boot and coming out of core off. For disabling RTA coming out of off mode, we do this by overriding the restore pointer for 3630 as the first point of entry before caches are touched and is common for GP and HS devices. To disable earlier than this could be possible by modifying the PPA for HS devices, but not for GP devices. Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [ambresh@ti.com: co-developer] Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP: control: move plat-omap/control.h to mach-omap2/control.hPaul Walmsley2010-10-081-1/+2
| | | | | | | | | | | | | | | | | Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
* OMAP: mach-omap2: Fix static declaration warningsManjunath Kondaiah G2010-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes sparse warnings due to non declaration of static structures and variables. Sparse warning logs fixed: arch/arm/mach-omap2/control.c:88:6: warning: symbol 'omap3_secure_ram_storage' was not declared. Should it be static? n arch/arm/mach-omap2/timer-gp.c:50:22: warning: symbol 'gptimer_wakeup' was not declared. Should it be static? arch/arm/mach-omap2/timer-gp.c:240:18: warning: symbol 'omap_timer' was not declared. Should it be static? arch/arm/mach-omap2/prcm.c:121:24: warning: symbol 'prcm_context' was not declared. Should it be static? arch/arm/mach-omap2/mux2420.c:510:29: warning: symbol 'omap2420_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux2430.c:589:29: warning: symbol 'omap2430_pop_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:934:28: warning: symbol 'omap3_cus_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1080:29: warning: symbol 'omap3_cus_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1272:28: warning: symbol 'omap3_cbb_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1393:29: warning: symbol 'omap3_cbb_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1603:28: warning: symbol 'omap36xx_cbp_subset' was not declared. Should it be static? arch/arm/mach-omap2/mux34xx.c:1821:29: warning: symbol 'omap36xx_cbp_ball' was not declared. Should it be static? arch/arm/mach-omap2/pm-debug.c:165:15: warning: symbol 'pm_dbg_dir' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:587:30: warning: symbol 'ads7846_config' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3evm.c:606:23: warning: symbol 'omap3evm_spi_board_info' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:46:25: warning: symbol 'rx51_sdrc_params' was not declared. Should it be static? arch/arm/mach-omap2/board-rx51-sdram.c:211:25: warning: symbol 'rx51_get_sdram_timings' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3touchbook.c:64:15: warning: symbol 'touchbook_revision' was not declared. Should it be static? arch/arm/mach-omap2/board-am3517evm.c:350:24: warning: symbol 'am3517_evm_dss_device' was not declared. Should it be static? arch/arm/mach-omap2/board-omap3stalker.c:567:23: warning: symbol 'omap3stalker_spi_board_info' was not declared. Should it be static? Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP: mach-omap2: Fix incorrect assignment warningsManjunath Kondaiah G2010-10-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes below sparse warnings for incorrect assignments. arch/arm/mach-omap2/control.c:195:16: warning: incorrect type in assignment (different address spaces) arch/arm/mach-omap2/control.c:195:16: expected unsigned int [usertype] *v_addr arch/arm/mach-omap2/control.c:195:16: got void [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:199:25: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/control.c:199:25: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:199:25: got unsigned int [usertype] * arch/arm/mach-omap2/control.c:320:28: warning: incorrect type in assignment (different address spaces) arch/arm/mach-omap2/control.c:320:28: expected void *[noderef] <asn:2>scratchpad_address arch/arm/mach-omap2/control.c:320:28: got void [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:321:9: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/control.c:321:9: expected void volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:321:9: got void *[noderef] <asn:2>scratchpad_address arch/arm/mach-omap2/control.c:324:9: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/control.c:324:9: expected void volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:324:9: got void * arch/arm/mach-omap2/control.c:327:9: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/control.c:327:9: expected void volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:327:9: got void * arch/arm/mach-omap2/control.c:334:9: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/control.c:334:9: expected void volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/control.c:334:9: got void * arch/arm/mach-omap2/control.c:321:9: warning: dereference of noderef expression arch/arm/mach-omap2/control.c:324:9: warning: dereference of noderef expression arch/arm/mach-omap2/control.c:327:9: warning: dereference of noderef expression arch/arm/mach-omap2/control.c:334:9: warning: dereference of noderef expression arch/arm/mach-omap2/pm34xx.c:323:28: warning: incorrect type in assignment (different address spaces) arch/arm/mach-omap2/pm34xx.c:323:28: expected unsigned int [usertype] *scratchpad_address arch/arm/mach-omap2/pm34xx.c:323:28: got void [noderef] <asn:2>*<noident> arch/arm/mach-omap2/pm34xx.c:326:26: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/pm34xx.c:326:26: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/pm34xx.c:326:26: got unsigned int [usertype] * arch/arm/mach-omap2/pm34xx.c:329:26: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/pm34xx.c:329:26: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/pm34xx.c:329:26: got unsigned int [usertype] * arch/arm/mach-omap2/pm34xx.c:334:29: warning: incorrect type in argument 1 (different address spaces) arch/arm/mach-omap2/pm34xx.c:334:29: expected void const volatile [noderef] <asn:2>*<noident> arch/arm/mach-omap2/pm34xx.c:334:29: got unsigned int [usertype] * Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* omap4: control: Add accessor api's for pad control moduleSantosh Shilimkar2010-09-271-0/+18
| | | | | | | | | | | | On OMAP4 control pad are not addressable from control core base. So the common omap_ctrl_read/write APIs breaks Hence export separate APIs to manage the omap4 pad control registers. This APIs will work only for OMAP4 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* omap4: control: Add ctrl_pad_base to omap_globalsSantosh Shilimkar2010-09-271-0/+7
| | | | | | | | | | | | | | | | | | | | | | | On omap4 control module is divided in four IP blocks. - CTRL_MODULE_CORE 0x4a002000 - CTRL_MODULE_PAD_CORE 0x4a100000 - CTRL_MODULE_WKUP 0x4a30c000 - CTRL_MODULE_PAD_WKUP 0x4a31e000 Addressing all the modules with single base address is not possible considering 16 bit offsets. The mux code manages the pad core and pad wakeup related base address inside the mux framework. For other usage only control core and control pad bases are necessary. So this patch maps only needed pad control base address which is used by device drivers and infrastructure code The main control core base is still kept same in this patch to keep git-bisect working. This will be fixed in the relevant patch in this series. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixesPaul Walmsley2010-05-201-3/+4
| | | | | | | | | | | Fix all of the remaining OMAP3 PRCM register shift/bitmask macros that did not use the _SHIFT/_MASK suffixes to use them. This makes the use of these macros consistent. It is intended to reduce error, as code can be inspected visually by reviewers to ensure that bitshifts and bitmasks are used in the appropriate places. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* omap2/3/4: ioremap omap_globals moduleSantosh Shilimkar2010-02-231-1/+5
| | | | | | | | | | | | | This is a clean-up patch towards dynamic allocation of IO space instead of using harcoded macros to calculate virtual addresses. Also update the sdrc, prcm and control module to allocate iospace dynamically Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNTRajendra Nayak2009-11-111-1/+15
| | | | | | | | | | | | | | | | | | | | Due to an OMAP3 errata (1.142), on HS/EMU devices SDRC should be programed to issue automatic self refresh on timeout of AUTO_CNT = 1 prior to any transition to OFF mode. This is needed only on sil rev's ES3.0 and above. This patch enables the above needed WA in the SDRC power register value stored in scratchpad, so that ROM code restores this value in SDRC POWER on the wakeup path. The original SDRC POWER register value is stored and restored back in omap_sram_idle() function. This fixes some random crashes observed while stressing suspend on HS/EMU devices. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: PM: SDRC auto-refresh workaround for off-modeTero Kristo2009-11-111-2/+7
| | | | | | | | | Errata: ES3.0, ES3.1 SDRC not sending auto-refresh when OMAP wakes-up from OFF mode Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: PM: Fix PLL_MOD CLKEN offset in scratchpadKalle Jokiniemi2009-11-111-1/+1
| | | | | | | | | | | | | | | | | | The CM_CLKEN_PLL register saved in scratchpad memory was wrongly using offset of 0x0004 instead of 0x0000. The effect of this was that boot ROM code would restore the wrong value when waking up from off mode. This wrong value, however, will be overwritten by prcm context restore. Still, a short period of wrong clock settings in CM_CLKEN_PLL remained between ROM code and prcm context restore. This is fixed by the patch. Problem reported by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3 PM: off-mode support for HS/EMU devicesTero Kristo2009-11-111-1/+7
| | | | | | | | | For HS/EMU devices, some additional resources need to be saved/restored for off-mode support. Namely, saving the secure RAM and a pointer to it in the scratchpad. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: PM: SCM context save/restoreRajendra Nayak2009-11-111-2/+155
| | | | | | | | | | | Add context save and restore for the System Control Module to suport off-mode. ETK and debobs definitions added by Peter De Schrijver. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* OMAP3: PM: Populate scratchpad contentsRajendra Nayak2009-11-111-0/+203
| | | | | | | | This patch populates the scratchpad contents as expected by the bootROM code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* omap: headers: Move remaining headers from include/mach to include/platTony Lindgren2009-10-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the remaining headers under plat-omap/include/mach to plat-omap/include/plat. Also search and replace the files using these headers to include using the right path. This was done with: #!/bin/bash mach_dir_old="arch/arm/plat-omap/include/mach" plat_dir_new="arch/arm/plat-omap/include/plat" headers=$(cd $mach_dir_old && ls *.h) omap_dirs="arch/arm/*omap*/ \ drivers/video/omap \ sound/soc/omap" other_files="drivers/leds/leds-ams-delta.c \ drivers/mfd/menelaus.c \ drivers/mfd/twl4030-core.c \ drivers/mtd/nand/ams-delta.c" for header in $headers; do old="#include <mach\/$header" new="#include <plat\/$header" for dir in $omap_dirs; do find $dir -type f -name \*.[chS] | \ xargs sed -i "s/$old/$new/" done find drivers/ -type f -name \*omap*.[chS] | \ xargs sed -i "s/$old/$new/" for file in $other_files; do sed -i "s/$old/$new/" $file done done for header in $(ls $mach_dir_old/*.h); do git mv $header $plat_dir_new/ done Signed-off-by: Tony Lindgren <tony@atomide.com>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-071-2/+2
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omapTony Lindgren2008-07-031-17/+7
| | | | | | | | | | | | New struct omap_globals contains the omap processor specific module bases. Use omap_globals to set the various base addresses to make detecting omap chip type simpler. Also introduce OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS for future multi-omap patches. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2: Add common register access for 24xx and 34xxPaul Walmsley2008-04-141-0/+74
This patch adds common register access for 24xx and 34xx power and clock management in order to share code between 24xx and 34xx. Only change USB platform init code to use new register access, other access will be changed in later patches. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
OpenPOWER on IntegriCloud