summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-lpc32xx
Commit message (Collapse)AuthorAgeFilesLines
* ARM: LPC32xx: Add the motor PWM clockAlban Bedel2012-11-122-0/+9
|
* ARM: LPC32xx: Cleanup irq.cRoland Stigge2012-11-071-5/+0
| | | | | | | | | | | This patch removes the IRQ mask initialization which is already done some lines above. This was actually a bug: The init was supposed to set the bits for the (chained) SUB IRQs. But this is already fixed by the previous patch, doing this implicitely via irq_set_chained_handler(). Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Relocate calls to irq_set_chained_handler()Roland Stigge2012-11-071-4/+4
| | | | | | | | | | | | | | | | | | | This patch fixes the issue of an access to a yet uninitialized data structure at the point where irq_set_chained_handler() was called by moving the respective calls to the end of lpc32xx_init_irq(). The call path was: irq_set_chained_handler() -> __irq_set_handler() -> irq_startup() -> irq_enable() -> desc->irq_data.chip->irq_unmask() at which point lpc32xx_unmask_irq() effectively read desc->irq_data.hwirq which was only later initialized. Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove superfluous irq_alloc_descs()Roland Stigge2012-11-071-9/+1
| | | | | | | This patch removes the call to irq_alloc_descs() which always returns an error since the descriptors are always preallocated already. Signed-off-by: Roland Stigge <stigge@antcom.de>
* Merge tag 'multiplatform' of ↵Linus Torvalds2012-10-011-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
| * Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux ↵Olof Johansson2012-09-201-2/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: move all dtb targets out of Makefile.bootRob Herring2012-09-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
* | | Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-10-013-30/+21
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
| * | | ARM: LPC32xx: Support GPI 28Roland Stigge2012-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the missing gpi28 to the supported GPIOs in the GPI P3 "chip". Signed-off-by: Roland Stigge <stigge@antcom.de>
| * | | ARM: LPC32xx: Platform update for devicetree completion of spi-pl022Roland Stigge2012-09-251-18/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi-pl022 got a further update to its devicetree support, completing properties such that no platform data is necessary anymore. This patch adjusts phy3250.c accordingly: The supplied platform data is deleted. However, OF_DEV_AUXDATA() are still necessary due to device naming ("dev:ssp0"). Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
| * | | ARM: LPC32xx: Board cleanupRoland Stigge2012-09-251-2/+0
| |/ / | | | | | | | | | | | | | | | This patch removes now unnecessary spi includes. Signed-off-by: Roland Stigge <stigge@antcom.de>
| * | ARM: LPC32xx: Remove board specific GPIO initRoland Stigge2012-09-061-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes a board specific GPIO initialization (for MMC power) from the platform initialization. On the reference boards (PHY3250 and EA3250), this separate initialization is not necessary, now reducing board specific initialization in the platform init of phy3250.c. Signed-off-by: Roland Stigge <stigge@antcom.de>
| * | ARM: LPC32xx: Provide DMA filter callbacks via platform dataRoland Stigge2012-09-061-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SLC and MLC NAND drivers now need their dma_filter callbacks via platform data to make them independent of single DMA engine drivers. (This also helps fixing build errors of the SLC and MLC drivers when building as modules because direct access to AMBA dma filter functions isn't available via export.) Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: LPC32xx: Use handle_edge_irq() callback on edge type irqsRoland Stigge2012-09-061-3/+4
| |/ | | | | | | | | | | | | | | irq.c uses handle_level_irq() as the unconditional default handler. This patch uses handle_edge_irq() instead for edge type irqs. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Srinivas Bakki <srinivas.bakki@nxp.com>
* | ARM: lpc32xx: use __iomem pointers for MMIOArnd Bergmann2012-09-192-5/+5
|/ | | | | | | | | ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: Roland Stigge <stigge@antcom.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: LPC32xx: Add PWM clockAlexandre Pereira da Silva2012-07-201-0/+14
| | | | | Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Set system serial based on cpu unique idAlexandre Pereira da Silva2012-07-201-2/+8
| | | | | | | | LPC32xx SoC has a 128 bits unique id that can be used as a system serial number, if none has been provided by atags or dt. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Adjust to pl08x DMA interface changesRoland Stigge2012-07-121-4/+3
| | | | | | | This patch adjusts the LPC32xx platform support to the new pl08x DMA interface, fixing the compile error resulting from changed pl08x structures. Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove unused gpiosAlexandre Pereira da Silva2012-07-011-3/+0
| | | | | | | Remove SPI0_CS, MMC_CD and MMC_WP gpios as they moved to devicetree. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove USB and I2C init from phy3250.cRoland Stigge2012-07-011-12/+0
| | | | | | | | USB and I2C initialization can be removed safely from the board specific phy3250.c, now that initialization moved to the generalized clock.c. Signed-off-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Cleanup USB clock initAlexandre Pereira da Silva2012-07-012-1/+81
| | | | | | | | Move most of usb clock initialization from lpc32xx_udc and ohci-nxp to clock.c. Also adds ohci clocks and otg clocks. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove wrong re-initialization of MMC clock registerRoland Stigge2012-07-011-7/+3
| | | | | | | | | | | This patch fixes a bug, (wrongfully) resetting the value of LPC32XX_CLKPWR_MS_CTRL back to its initial contents (after careful setup). This was discovered only with a board/bootloader combination (EA3250) where the contents of the respective register wasn't already at the correct value on Linux boot. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Add further bits to MMC initRoland Stigge2012-07-011-1/+5
| | | | | | | | This patch makes sure certain MMC bits are cleared as they should for initialization. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Init MMC via clockRoland Stigge2012-07-012-7/+4
| | | | | | | | This patch moves MMC/SD controller initialization from the board specific file phy3250.c to clock.c. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Move i2s1 dma enabling to clock.cAlexandre Pereira da Silva2012-06-142-6/+2
| | | | | | | Move i2s1 dma init to be done when it's clock is enabled. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Move uart6 irda disable to serial.cAlexandre Pereira da Silva2012-06-142-5/+5
| | | | | | | | Move the irda configuration to serial.c where other special cases are handled Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Cleanup board init, remove duplicate clock initAlexandre Pereira da Silva2012-06-141-17/+0
| | | | | | | | Remove SSP0, CLCD and DMA clocks that are already migrated to the clock framework. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove spi chip definitionsAlexandre Pereira da Silva2012-06-141-56/+0
| | | | | | | Leave chipselect and spi devices binding to the devicetree Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove spi chipselect request from board initAlexandre Pereira da Silva2012-06-141-7/+0
| | | | | | | | The lpc32xx spi0 chipselect will be requested directly from the pl022 driver Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Build arch dtbsAlexandre Pereira da Silva2012-06-141-0/+1
| | | | | | | Add ea3250.dtb and phy3250.dtb to the list of dtbs to be built Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use defaultRoland Stigge2012-06-141-2/+0
| | | | | | | | | | ARCH_NR_GPIOS was defined statically to include exactly all SoC specific GPIOs. Now if additional GPIOs need to be added dynamically, e.g. via DT, none are available. Removing the mach specific setting, leaving ARCH_NR_GPIOS to the default of 256 (currently in include/asm-generic/gpio.h). Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: DT conversion of Standard UARTsRoland Stigge2012-06-142-116/+1
| | | | | | | | | | | | This patch switches from static serial driver initialization to devicetree configuration. This way, the Standard UARTs of the LPC32xx SoC can be enabled individually via DT. E.g., instead of Kconfig configuration, the phy3250.dts activates UARTs 3 and 5. Signed-off-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Add MMC controller supportRoland Stigge2012-06-141-4/+39
| | | | | | | | | This patch adds support for the MMC controller of the LPC32xx SoC to the platform initialization via the pl08x primecell driver. Lacking more complete DT support, done via DT auxdata. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Clock adjustment for key matrix controllerRoland Stigge2012-06-141-1/+1
| | | | | | | | The clock.c file needs to be changed to match the automatic device name to its clock. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com>
* ARM: LPC32xx: Add DMA configuration to platform dataRoland Stigge2012-06-141-0/+31
| | | | | | | This patch adds DMA channel configuration to the LPC32xx platform file. The configured DMA signalling is generic for LPC32xx SoC and is not board specific. Signed-off-by: Roland Stigge <stigge@antcom.de>
* ARM: LPC32xx: Remove SLC controller initialization from platform initRoland Stigge2012-06-141-4/+0
| | | | | | | | | Since we now support two MTD NAND controllers (MLC and SLC) for LPC32xx via DT, we don't initialize the SLC controller statically anymore, but do it via the clock setup (see previous patch). Signed-off-by: Roland Stigge <stigge@antcom.de> Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
* ARM: LPC32xx: Clock initialization for NAND controllersRoland Stigge2012-06-141-2/+14
| | | | | | | This patch adds clock initialization for the MLC NAND controller of the LPC32xx SoC and adjusts it for the SLC controller. Signed-off-by: Roland Stigge <stigge@antcom.de>
* Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2012-05-241-1/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
| * gpio/lpc32xx: Add device tree supportRoland Stigge2012-05-181-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds device tree support for gpio-lpc32xx.c. To register the various GPIO banks as (struct) gpio_chips via the same DT gpio-controller, we utilize the adjusted of_xlate API to manipulate the actually used struct gpio_chip. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | ARM: LPC32xx: Move common code to common.cRoland Stigge2012-04-222-13/+13
| | | | | | | | | | | | This patch moves non-boardspecific LPC32xx code to common.c Signed-off-by: Roland Stigge <stigge@antcom.de>
* | ARM: LPC32xx: Device tree supportRoland Stigge2012-04-224-311/+111
| | | | | | | | | | | | This patch does the actual device tree switch for the LPC32xx SoC. Signed-off-by: Roland Stigge <stigge@antcom.de>
* | ARM: LPC32xx: Remove obsolete platform KconfigRoland Stigge2012-04-221-26/+0
| | | | | | | | | | | | | | This patch removes two Kconfig options now unused (the network driver is configured via DT now). Signed-off-by: Roland Stigge <stigge@antcom.de>
* | ARM: LPC32xx: clock.c registration adjustmentRoland Stigge2012-04-221-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adjusts the clocks of the LPC32xx SoC to be picked up correctly by the respective drivers. * AMBA dmaengine * watchdog * I2C * TSC * MMC * Ethernet * ADC * USB Device (All except the pl08xdmac AMBA dmaengine via DT generated device name) Signed-off-by: Roland Stigge <stigge@antcom.de>
* | ARM: LPC32xx: clock.c cleanupRoland Stigge2012-04-221-42/+35
| | | | | | | | | | | | This patch makes use of the default macro CLKDEV_INIT() for clock registration. Signed-off-by: Roland Stigge <stigge@antcom.de>
* | i2c-pnx.c: Remove duplicated i2c.hRoland Stigge2012-04-221-63/+0
| | | | | | | | | | | | | | | | | | | | The platforms using i2c-pnx.c both defined a duplicated i2c.h (used nowhere else). This patch removes those and integrates the contents into the driver itself. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* | i2c-pnx.c: Use resources in platformsRoland Stigge2012-04-221-25/+42
|/ | | | | | | | | As a precondition for device tree conversion, the platforms using i2c-pnx.c are converted to using mem and irq resources instead of platform data. Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-03-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc fixes from Olof Johansson: "This is a first pass of some of the merge window fallout for ARM platforms. Nothing controversial: - A system.h fallout fix for OMAP - PXA fixes for breakage caused by the regulator struct changes - GPIO fixes for OMAP to properly deal with dynamic IRQ allocation - A mismerge in our arm-soc tree of an lpc32xx change for networking - A fix for USB setup on tegra - An undo of __init annotation of display mux setup on OMAP that's needed at runtime" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: pxa: fix build issue on stargate2 ARM: pxa: fix build issue on cm-x300 ARM: pxa: fix build failure for regulator consumer in em-x270.c ARM: LPC32xx: clock.c: Fix lpc-eth clock reference ARM: OMAP: pm: fix compilation break ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit() ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq() ARM: pxa: fix regulator related build fail in magician_defconfig ARM: tegra: Fix device tree AUXDATA for USB/EHCI ARM: OMAP2+: Remove __init from DSI mux functions
| * ARM: LPC32xx: clock.c: Fix lpc-eth clock referenceRoland Stigge2012-03-291-1/+1
| | | | | | | | | | | | | | | | | | | | During a complex merge for v3.4, one line of the commit c20b909be9ba27173294a52d08cab293ec030a2c ("ARM: LPC32xx: Ethernet support") was reverted wrongly ("lpc-eth.0" -> "lpc-net.0") while the other conflicts were merged correctly. This patch re-applies the clock name "lpc-eth.0". Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Olof Johansson <olof@lixom.net>
* | Merge tag 'cleanup2' of ↵Linus Torvalds2012-03-291-27/+0
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
| * ARM: remove bunch of now unused mach/io.h filesRob Herring2012-03-061-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
OpenPOWER on IntegriCloud