summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* arm: kirkwood: convert db-88f6281/db-88f6282 to the Device TreeThomas Petazzoni2013-05-271-6/+7
| | | | | | | | | | | | | | | | | | | This commit converts the Marvell DB-88F6281/DB-88F6282 board to the Device Tree. In fact, the code was supporting two different boards: one with the 6281 SoC variant, and one with the 6282 SoC variant. The difference between the two being that the 6281 has one PCIe interface, and the 6282 has two PCIe interfaces. In order to handle that with the Device Tree, we create a 'kirkwood-db.dtsi' file that contains the definitions common to both boards, and 'kirkwood-db-88f6281.dts' and 'kirkwood-db-88f6282.dts' for the definitions specific to each board. This is similar to what is done for the QNAP TS219 Kirkwood platform. We have kept one single Kconfig option, just like it was before. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* arm: kirkwood: convert ZyXEL NSA310 to use DT for the PCIe interfaceThomas Petazzoni2013-05-271-8/+0
| | | | | | | | | | | | | Now that the PCIe mvebu driver is usable on Kirkwood, use it instead of the legacy PCIe code, since it allows to describe the PCIe interfaces in the Device Tree. Since it was the only device left that prevented this platform to use the Device Tree only, we remove the board-nsa310.c file and the related Kconfig/Makefile bits. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: update Network Space Mini v2 descriptionSimon Guinot2013-04-101-2/+6
| | | | | | | | | | | | | LaCie has released two products under the CloudBox name. The netspace_mini_v2 machine is embedded in the oldest product. The cloudbox machine is embedded in the newest one. In order to allow a CloudBox user to select the right machine support, this patch adds some informations to the netspace_mini_v2 Kconfig description. A comment is also added to the dts file. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: DT board setup for CloudBoxSimon Guinot2013-04-101-0/+7
| | | | | | | | | | | | | | | | | | | | | | This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: sort board entries by ASCII-code orderSimon Guinot2013-04-101-156/+158
| | | | | | | | | This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add support for NETGEAR ReadyNAS Duo v2 using DTArnaud Ebalard2013-03-281-0/+9
| | | | | | | | | | | | Add support for NETGEAR ReadyNAS Duo v2 (Hardware specs available here: http://natisbad.org/NAS/). Almost everything is supported via provided .dts. A board-readynas.c file is nonetheless required for device not only converted to DT (Gbit controller). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Tested-By: Arnaud Ebalard <arno@natisbad.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: convert Guruplug Server Plus to use the device treeWilly Tarreau2013-02-281-0/+7
| | | | | | | | | | Add a device tree entry for the Guruplug Server Plus board. This port was based both on the work done on the dreamplug and the dockstar. It builds, boots and works on my Guruplug Server Plus. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* Merge tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-12-141-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC updates for Marvell mvebu/kirkwood from Olof Johansson: "This is a branch with updates for Marvell's mvebu/kirkwood platforms. They came in late-ish, and were heavily interdependent such that it didn't make sense to split them up across the cross-platform topic branches. So here they are (for the second release in a row) in a branch on their own." * tag 'mvebu' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (88 commits) arm: l2x0: add aurora related properties to OF binding arm: mvebu: add Aurora L2 Cache Controller to the DT arm: mvebu: add L2 cache support dma: mv_xor: fix error handling path dma: mv_xor: fix error checking of irq_of_parse_and_map() dma: mv_xor: use request_irq() instead of devm_request_irq() dma: mv_xor: clear the window override control registers arm: mvebu: fix address decoding armada_cfg_base() function ARM: mvebu: update defconfig with I2C and RTC support ARM: mvebu: Add SATA support for OpenBlocks AX3-4 ARM: mvebu: Add support for the RTC in OpenBlocks AX3-4 ARM: mvebu: Add support for I2C on OpenBlocks AX3-4 ARM: mvebu: Add support for I2C controllers in Armada 370/XP arm: mvebu: Add hardware I/O Coherency support arm: plat-orion: Add coherency attribute when setup mbus target arm: dma mapping: Export a dma ops function arm_dma_set_mask arm: mvebu: Add SMP support for Armada XP arm: mm: Add support for PJ4B cpu and init routines arm: mvebu: Add IPI support via doorbells arm: mvebu: Add initial support for power managmement service unit ...
| * ARM: Kirkwood: switch to DT clock providersAndrew Lunn2012-11-201-0/+2
| | | | | | | | | | | | | | | | | | With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* | ARM: Kirkwood: Enable regulator and fixed regulators.Andrew Lunn2012-11-241-0/+2
| | | | | | | | | | | | | | | | | | A few boards use a GPIO line to enable power to subsystems, eg USB or SATA devices. Pull in the regulator framework as the first step to controlling these GPIO lines are regulators. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: Kirkwood: Convert DNSKW to use gpio-poweroff.Andrew Lunn2012-11-241-0/+3
| | | | | | | | | | | | | | | | Also enable the gpio-poweroff driver when DT is used. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Add Plat'Home OpenBlocks A6 supportNobuhiro Iwamatsu2012-11-221-0/+7
| | | | | | | | | | | | | | | | | | Add support for Plat'Home OpenBlocks A6 using the device tree where possible. This commit supports SATA, USB, ether and serial console. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: Add support for the MPL CEC4Stefan Peter2012-11-211-0/+7
| | | | | | | | | | Signed-off-by: Stefan Peter <s.peter@mpl.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | arm: kirkwood: add support for ZyXEL NSA310Tero Jaasko2012-11-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Andrew > > +#define NSA310_GPIO_LED_ESATA_GREEN 12 > > <..> > > +#define NSA310_GPIO_POWER_OFF 48 > > It looks like most of these are not used. Please remove them. True. Fixed. > > +static struct mtd_partition nsa310_mtd_parts[] = { > > + { > > + .name = "uboot", > > + .offset = 0, > > + .size = 0x100000, > > + .mask_flags = MTD_WRITEABLE, > > + }, { > > <..> > You should be able to put all that into DT. Take a look at Correct. I did the conversion and tested that the partitions can be read with dd and produce exactly the same data before and after conversion. So, the partition offsets at least should be fine. > > +static struct i2c_board_info __initdata nsa310_i2c_info[] = { > > + { I2C_BOARD_INFO("adt7476", 0x2e) }, > > +}; > > You can also do this in DT as well. kirkwood-ts219.dtsi has > > i2c@11000 { > status = "okay"; > clock-frequency = <400000>; Ok, I did convert the i2c definition to use the devicetree. The adt7476 device itself is not at reach of device tree, AFAIK and requires more work at there? Thanks for your valuable comments. Following is a new patch that should address the problems and mistakes you pointed and also some of the pointed by Jason Cooper. The nand and i2c are now defined at DT and I also removed the pointless defines and ARM_APPENDED_DTB. It is based against the Linus' official 3.6 version. Best regards, Tero Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: Kirkwood: new board USI TopkickJason Cooper2012-11-211-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new kirkwood box made by Universal Scientific Industrial, Inc. The product description is here: http://www.usish.com/english/products_topkick1281p2.php It is very similar to the dreamplug and other plug devices, with the exception that it has room for a 2.5" SATA HDD internally. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
* | ARM: kirkwood: DT board setup for Network Space Mini v2Simon Guinot2012-11-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds DT board setup for the LaCie NAS Network Space Mini v2 (aka SafeBox). The hardware characteristics are very close to those of the Network Space Lite v2. The main difference are: - A GPIO fan which is only available on the NS2 Mini. - A single USB host port is wired on the NS2 Mini. The NS2 Lite provides an additional dual-mode USB port (host/device). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: DT board setup for Network Space Lite v2Simon Guinot2012-11-211-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds DT board setup for the LaCie NAS Network Space Lite v2. This board is derived from the Network Space v2 and a lot of hardware characteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Note that the SATA LED is not compatible with the driver leds-ns2. The LED behaviour ("on", "off" or "SATA activity blink") is controlled via a single MPP (21). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | ARM: kirkwood: DT board setup for Network Space v2 and parentsSimon Guinot2012-11-211-0/+21
|/ | | | | | | | | | This patch adds DT board setup for LaCie Network Space v2 and parents, based on the Marvell Kirkwood 6281 SoC. This includes Network Space v2 (Max) and Internet Space v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: initial DTS support for km_kirkwoodValentin Longchamp2012-09-211-0/+7
| | | | | | | | | | | | | | | | This is a first attempt to support the km_kirkwood reference design with a device tree. This km_kirkwood design is present in many Keymile products. It is based on the Marvell Bobcat SOC which integrates a Kirkwood CPU next to a big L2 Ethernet Switch. The Kirkwood in the SOC is very similar to the "normal" one, but there are a few differences. This initial support is minimal: the kernel can boot with network (ge0), serial port and NAND functional. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: DT board setup for Seagate FreeAgent DockstarSebastian Hesselbarth2012-09-211-0/+7
| | | | | | | | This add a DT compatible board specific setup for the Seagate FreeAgent Dockstar. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: Kirkwood: Iomega ix2-200 DT supportAlan M Butler2012-09-211-0/+7
| | | | | | | | | | | | | | | | Add support for the Iomega ix2-200. Led's and buttons working as of kernel 3.6-rc2 the 3 lines in the network interface do seem to be required as removing either causes the network card to not be able to reach the network (at least on my device). Product page: http://go.iomega.com/en/products/network-storage-desktop/storcenter-network-storage-solution/network-hard-drive-ix2-200-cloud/?partner=4735#tech_specsItem_tab Signed-off-by: Alan M Butler <alanbutty12@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add LS-XHL and LS-CHLv2 supportMichael Walle2012-07-271-0/+8
| | | | | | | | Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex NetJosh Coombs2012-07-271-0/+7
| | | | | | | | This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
* ARM: Kirkwood: Add basic device tree support for QNAP TS219.Andrew Lunn2012-07-271-0/+14
| | | | | | | | | The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetreeSimon Baatz2012-05-151-0/+8
| | | | | | | | | | | Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as currently possible in the devicetree files, including the NAND partitions. Use the partition scheme of the original firmware by default. Create a board-ib62x0.c for everything else. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* kirkwood: Add iconnect supportArnaud Patard (Rtp)2012-05-151-0/+6
| | | | | | | | Add support for Iomega Iconnect system. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Tested-By: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: Basic support for DNS-320 and DNS-325Jamie Lentin2012-05-151-0/+8
| | | | | | | | | | | | | | | | | | | Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* ARM: kirkwood: add dreamplug (fdt) support.Jason Cooper2012-02-271-0/+14
| | | | | | | | | | | | | | | | | | | | Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Kirkwood: Add support for 6282 based QNAP devicesMartin Michlmayr2010-12-071-6/+6
| | | | | | | | | | | | Add support for the QNAP NAS devices based on Marvell's 6282 Kirkwood chip (TS-119P+, TS-219P+ and TS-419P+). The differences to the 6281 based devices are: - Ethernet PHY address - GPIOs used for buttons (TS-119P+/TS-219P+) Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: add LaCie d2 Network v2 supportSimon Guinot2010-09-191-0/+6
| | | | | Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: support for Seagate DockStarEric Cooper2010-09-191-0/+6
| | | | | | | | This patch adds support for the Seagate FreeAgent DockStar, a Marvell SheevaPlug variant. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: add LaCie Network Space Max v2 supportSimon Guinot2010-07-161-0/+6
| | | | | Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Marvell OpenRD-Ultimate machine supportDmytro Milinevskyy2010-07-161-0/+7
| | | | | | | | | This patch adds support for the OpenRD Ultimate machine (could be found at http://www.arm.linux.org.uk/developer/machines/list.php?id=2884) Signed-off-by: Dmytro Milinevskyy <milinevskyy@gmail.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: Add support for HP t5325 Thin ClientMartin Michlmayr2010-07-161-0/+6
| | | | | | | | | Add support for the HP t5325 Thin Client. This thin client is based on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB SATA-attached flash and an XGI Volari Z11 GPU. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: add LaCie 5Big Network v2 supportSimon Guinot2010-05-031-0/+6
| | | | Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: add LaCie 2Big Network v2 supportSimon Guinot2010-05-031-0/+6
| | | | Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: Marvell GuruPlug supportSiddarth Gore2010-05-031-0/+6
| | | | | | | | | | | | | | | GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stableRussell King2010-02-251-0/+6
|\
| * [ARM] eSATA SheevaPlug basic board supportJohn Holland2010-02-231-0/+6
| | | | | | | | | | | | | | | | Allow basic eSATA SheevaPlug board configuration and build. Signed-off-by: John Holland <john.holland@cellent-fs.de> Signed-off-by: Nicolas Pitre <nico@marvell.com> --
* | [ARM] Kirkwood: add LaCie Internet Space v2 supportSimon Guinot2010-02-091-0/+6
| | | | | | | | | | | | | | | | | | The Internet and Network Space v2 boards are very close. The only difference is that there is no USB type B plug wired on the Internet Space v2. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | [ARM] kirkwood: combine support for openrd base/client supportAlexander Clouter2010-02-051-0/+11
|/ | | | | | | | | | Inspired by the mach-ep93xx flattening work, there is really not much difference between the OpenRD base and client board support so they should be merged together. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Acked-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: Add LaCie Network Space v2 supportSimon Guinot2009-12-101-0/+6
| | | | | Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Kirkwood: Add QNAP TS-110/TS-210 to Kconfig help textMartin Michlmayr2009-11-131-2/+3
| | | | | | | | | | Add two new models from QNAP to the help text. They are compatible with the TS-119/TS-219 and therefore supported by the current code. The only difference is that they have less RAM (256 MB instead of 512 MB), a slower CPU (800 MHz vs 1.2 GHz) and a plastic case. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Kirkwood: Add support for QNAP TS-41x Turbo NASMartin Michlmayr2009-11-131-0/+7
| | | | | | | | Add support for the QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Kirkwood: Marvell OpenRD-Base board supportDhaval Vasa2009-08-101-0/+6
| | | | | | | | | | | | | | | | | | | | reference: http://open-rd.org http://code.google.com/p/openrd This patch is tested for: 1. Boot from DRAM/NAND flash 2. NAND read/write/erase 3. GbE0 4. USB read/write FIXME: 1. SD/UART1 selection 2. MPP configuration (currently, default) 3. PEX Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Kirkwood: add Marvell 88F6281 GTW GE board supportLennert Buytenhek2009-06-081-0/+6
| | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
* [ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NASMartin Michlmayr2009-03-231-0/+6
| | | | | | | Add support for the QNAP TS-119 and TS-219 Turbo NAS devices. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Kirkwood: Marvell SheevaPlug supportShadi Ammouri2009-03-151-0/+6
| | | | Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] add Marvell Kirkwood (88F6000) SoC supportSaeed Bishara2008-06-221-0/+25
The Marvell Kirkwood (88F6000) is a family of ARM SoCs based on a Shiva CPU core, and features a DDR2 controller, a x1 PCIe interface, a USB 2.0 interface, a SPI controller, a crypto accelerator, a TS interface, and IDMA/XOR engines, and depending on the model, also features one or two Gigabit Ethernet interfaces, two SATA II interfaces, one or two TWSI interfaces, one or two UARTs, a TDM/SLIC interface, a NAND controller, an I2S/SPDIF interface, and an SDIO interface. This patch adds supports for the Marvell DB-88F6281-BP Development Board and the RD-88F6192-NAS and the RD-88F6281 Reference Designs, enabling support for the PCIe interface, the USB interface, the ethernet interfaces, the SATA interfaces, the TWSI interfaces, the UARTs, and the NAND controller. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
OpenPOWER on IntegriCloud