summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-imx
Commit message (Collapse)AuthorAgeFilesLines
* Merge remote-tracking branch 'jcooper/irqchip/vybrid' into imx/dtShawn Guo2015-03-301-0/+1
|\
| * irqchip: vf610-mscm-ir: Add support for Vybrid MSCM interrupt routerStefan Agner2015-03-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Vybrid's interrupt router. On VF6xx models, almost all peripherals can be used by either of the two CPU's, the Cortex-A5 or the Cortex-M4. The interrupt router routes the peripheral interrupts to the configured CPU. This IRQ chip driver configures the interrupt router to route the requested interrupt to the CPU the kernel is running on. The driver makes use of the irqdomain hierarchy support. The parent is given by the device tree. This should be one of the two possible parents either ARM GIC or the ARM NVIC interrupt controller. The latter is currently not yet supported. Note that there is no resource control mechnism implemented to avoid concurrent access of the same peripheral. The user needs to make sure to use device trees which assign the peripherals orthogonally. However, this driver warns the user in case the interrupt is already configured for the other CPU. This provides a poor man's resource controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Link: https://lkml.kernel.org/r/1425249689-32354-2-git-send-email-stefan@agner.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | Merge branch 'imx/soc' into imx/dtShawn Guo2015-03-303-2/+222
|\ \
| * | ARM: imx: depend MXC debug board on 3DS machinesStefan Agner2015-03-131-0/+1
| | | | | | | | | | | | | | | | | | | | | Depend the MXC debug board on machines which actually support it. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx6: gpc: Add PU power domain for GPU/VPUPhilipp Zabel2015-03-112-0/+214
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When generic pm domain support is enabled, the PGC can be used to completely gate power to the PU power domain containing GPU3D, GPU2D, and VPU cores. This code triggers the PGC powerdown sequence to disable the GPU/VPU isolation cells and gate power and then disables the PU regulator. To reenable, the reverse powerup sequence is triggered after the PU regulator is enabled again. The GPU and VPU devices in the PU power domain temporarily need to be clocked during powerup, so that the reset machinery can work. [Avoid explicit regulator enabling in probe, unless !PM] Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx6q: clk: Add support for mipi_ipg clock as a shared clock gateLiu Ying2015-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CG8 field of the CCM CCGR3 register is the 'mipi_core_cfg' gate clock, according to the i.MX6q/sdl reference manuals. This clock is actually the gate for several clocks, including the ipg clock's output. The MIPI DSI host controller embedded in the i.MX6q/sdl SoCs takes the ipg clock as the pclk - the APB clock signal . In order to gate/ungate the ipg clock, this patch adds a new shared clock gate named as "mipi_ipg". Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx6q: clk: Add support for mipi_core_cfg clock as a shared clock gateLiu Ying2015-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CG8 field of the CCM CCGR3 register is named as 'mipi_core_cfg' clock, according to the i.MX6q/sdl reference manuals. This clock is actually the gate for several clocks, including the hsi_tx_sel clock's output and the video_27m clock's output. The MIPI DSI host controller embedded in the i.MX6q/sdl SoCs uses the video_27m clock to generate PLL reference clock and MIPI core configuration clock. In order to gate/ungate the two MIPI DSI host controller relevant clocks, this patch adds the mipi_core_cfg clock as a shared clock gate. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx6q: clk: Change hsi_tx clock to be a shared clock gateLiu Ying2015-03-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CG8 field of the CCM CCGR3 register is named as 'mipi_core_cfg' clock, according to the i.MX6q/sdl reference manuals. This clock is actually the gate for several clocks, including the hsi_tx_sel clock's output and the video_27m clock's output. So, this patch changes the hsi_tx clock to be a shared clock gate. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx6q: clk: Change hdmi_isfr clock's parent to be video_27m clockLiu Ying2015-03-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the table 33-1 in the i.MX6Q reference manual, the hdmi_isfr clock's parent should be the video_27m clock. The i.MX6DL reference manual has the same statement. This patch changes the hdmi_isfr clock's parent from the pll3_pfd1_540m clock to the video_27m clock. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: imx6q: clk: Add the video_27m clockLiu Ying2015-03-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch supports the video_27m clock which is a fixed factor clock of the pll3_pfd1_540m clock. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | ARM: vf610: use SMP_ON_UP for Vybrid SoCStefan Agner2015-02-261-0/+1
| |/ | | | | | | | | | | | | | | The Vybrid SoC has only one Cortex-A5 core and hence should select the SMP_ON_UP configuration on a SMP kernel. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Remove imxdi_rtc platform codeFabio Estevam2015-03-133-46/+0
| | | | | | | | | | | | | | | | platform-imxdi_rtc.c is only used by mx25, so it can safely go away now that mx25 has been converted to dt. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Remove "mx25.h" header fileFabio Estevam2015-03-1314-202/+0
| | | | | | | | | | | | | | | | | | | | | | As mx25 has been converted to a dt-only platform, we do not need the "mx25.h" header file anymore. Remove it and also clean up all the mx25 occurences from the platform helper code. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Remove static memory mappingFabio Estevam2015-03-134-96/+19
| | | | | | | | | | | | | | We use dynamic memory mapping when using dt, so remove all the static mappings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Retrieve IIM base from dtFabio Estevam2015-03-131-1/+10
| | | | | | | | | | | | | | We should use dt to retrieve the IIM base address. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Remove mx25_clocks_init()Fabio Estevam2015-03-132-76/+0
| | | | | | | | | | | | | | | | | | mx25_clocks_init() is only used to register the clocks for non-dt platforms. As mx25 has been converted to a dt-only platform, we can safely remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Remove platform code support filesFabio Estevam2015-03-114-709/+1
| | | | | | | | | | | | | | | | As mx25 is a dt-only platform, we can get rid of platform code support files, which are unused now. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Convert to a dt-only platformFabio Estevam2015-03-113-18/+15
| | | | | | | | | | | | | | | | | | As there is no more mx25 board files, we can turn mx25 into a dt-only platform. Rename imx25-dt.c to mach-imx25.c to be consistent with the other i.MX SoCs. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx25: Remove eukrea mx25 board filesFabio Estevam2015-03-114-518/+0
| | | | | | | | | | | | | | | | | | eukrea mx25 is well supported in device tree, so let's get rid of its board files. Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: mx25: Remove mach-mx25_3ds board fileFabio Estevam2015-03-063-286/+0
| | | | | | | | | | | | | | | | imx25-pdk.dts provides a more complete support than the board file version, so let's get rid of the board file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx: Fix trivial typo in commentsYannick Guerrini2015-03-032-2/+2
| | | | | | | | | | | | | | change 'mutliple' to 'multiple' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx: Kconfig: Fix grammar in help textFabio Estevam2015-03-031-2/+2
| | | | | | | | | | | | | | Use "This enables" in the Kconfig help text to fix grammar. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx/iomux-v3: allow pad_list to be constUwe Kleine-König2015-03-0310-11/+13
|/ | | | | | | | Also fix all machine files to make use of it and while at it also make the pad lists __initconst. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: make of_device_ids constUwe Kleine-König2015-02-191-1/+1
| | | | | | | | | | | | | of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs in arch/arm as const, too. While at it also add some __initconst annotations. Acked-by: Jason Cooper <jason@lakedameon.net> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'soc-for-linus' of ↵Linus Torvalds2015-02-1714-21/+181
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Also included are some cleanups where the platform maintainers hadn't separated cleanups from new developent in separate branches. Some of the larger things worth pointing out: - A large set of changes from Alexandre Belloni and Nicolas Ferre preparing at91 platforms for multiplatform and cleaning up quite a bit in the process. - Removal of CSR's "Marco" SoC platform that never made it out to the market. We love seeing these since it means the vendor published support before product was out, which is exactly what we want! New platforms this release are: - Conexant Digicolor (CX92755 SoC) - Hisilicon HiP01 SoC - CSR/sirf Atlas7 SoC - ST STiH418 SoC - Common code changes for Nvidia Tegra132 (64-bit SoC) We're seeing more and more platforms having a harder time labelling changes as cleanups vs new development -- which is a good sign that we've come quite far on the cleanup effort. So over time we might start combining the cleanup and new-development branches more" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits) ARM: at91/trivial: unify functions and machine names ARM: at91: remove at91_dt_initialize and machine init_early() ARM: at91: change board files into SoC files ARM: at91: remove at91_boot_soc ARM: at91: move alternative initial mapping to board-dt-sama5.c ARM: at91: merge all SOC_AT91SAM9xxx ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init() ARM: digicolor: select syscon and timer ARM: zynq: Simplify SLCR initialization ARM: zynq: PM: Fixed simple typo. ARM: zynq: Setup default gpio number for Xilinx Zynq ARM: digicolor: add low level debug support ARM: initial support for Conexant Digicolor CX92755 SoC ARM: OMAP2+: Add dm816x hwmod support ARM: OMAP2+: Add clock domain support for dm816x ARM: OMAP2+: Add board-generic.c entry for ti81xx ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage ARM: at91: remove unused mach/system_rev.h ARM: at91: stop using HAVE_AT91_DBGUx ARM: at91: fix ordering of SRAM and PM initialization ...
| * ARM: clk-imx6q: refine esai_ipg's parentShengjiu Wang2015-01-201-1/+1
| | | | | | | | | | | | | | esai_ipg clock's parent is ahb, not ipg. Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM i.MX6q: unmap memory mapped at imx6q_opp_check_speed_grading()Sebastian Andrzej Siewior2015-01-201-1/+1
| | | | | | | | | | | | | | | | | | imx6q_opp_check_speed_grading() remaps memory to the base variable and never unmaps it. I can't see how this can be of any use later so here I unmap it. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: clk-vf610: Add clock for SNVSSanchayan Maity2015-01-131-0/+2
| | | | | | | | | | | | | | Add support for clock gating of the SNVS peripheral. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: clk-vf610: Add clock for UART4 and UART5Bhuvanchandra DV2015-01-131-0/+2
| | | | | | | | | | | | | | | | | | Add support for clock gating of UART4 and UART5. We use these UART's in a (not yet mainlined) device tree. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: drop CPUIDLE_FLAG_TIME_VALID from cpuidle-imx6sxShawn Guo2015-01-061-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the result of commit b82b6cca4880 ("cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic"), the flag gets removed and hence we see the compile error below. CC arch/arm/mach-imx/cpuidle-imx6sx.o arch/arm/mach-imx/cpuidle-imx6sx.c:69:13: error: ‘CPUIDLE_FLAG_TIME_VALID’ undeclared here (not in a function) Since the behavior of the original flag has been the default, we can simply drop the flag now. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: support arm power off in cpuidle for i.mx6sxAnson Huang2015-01-057-8/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces an independent cpuidle driver for i.MX6SX, and supports arm power off in idle, totally 3 levels of cpuidle are supported as below: 1. ARM WFI; 2. SOC in WAIT mode; 3. SOC in WAIT mode + ARM power off. ARM power off can save at least 5mW power. This patch also replaces imx6q_enable_rbc with imx6_enable_rbc. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: remove unnecessary setting for DSMAnson Huang2015-01-051-1/+0
| | | | | | | | | | | | | | | | | | | | Now we support DSM in OCRAM for all i.MX6 SoCs, the resume entry point is set in asm code of suspend-imx6.S, so no need to set the resume entry point for SRC in pre-suspend flow. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: correct the hardware clock gate setting for shared nodesAnson Huang2015-01-051-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For those clk gates which hold share count, since its is_enabled callback is only checking the share count rather than reading the hardware register setting, in the late phase of kernel bootup, the clk_disable_unused action will NOT handle the scenario of share_count is 0 but the hardware setting is enabled, actually, U-Boot normally enables all clk gates, then those shared clk gates will be always enabled until they are used by some modules. So the problem would be: when kernel boot up, the usecount cat from clk tree is 0, but the clk gates actually is enabled in hardware register, it will confuse user and bring unnecessary power consumption. This patch adds .disable_unused callback and using hardware register check for .is_enabled callback of shared nodes to handle such scenario in late phase of kernel boot up, then the hardware status will match the clk tree info. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM: imx: pllv3: add shift for frequency multiplierStefan Agner2015-01-053-5/+10
| | | | | | | | | | | | | | | | | | | | | | Add shift capabilties for the frequency multiplier (DIV_SELECT) to support Vybrid's USB PLL oddity. The PLL3 and PLL7 are the only PLL control registers which have the DIV_SELECT bit shifted by one. Be aware, there are known documentation errors in the reference manual too. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * ARM vf610: add compatibilty strings of supported Vybrid SoC'sStefan Agner2015-01-051-1/+4
| | | | | | | | | | | | | | | | | | | | The Vybrid SoC family (in the kernel known as vf610) is a familiy of multiple similar SoC's. The VF5xx series comes without secondary Cortex-M4 core, while the second number VFx1x indicates the presence of a L2 cache controller. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: imx6sx: Set PLL2 as parent of QSPI clocksFabio Estevam2015-01-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default qspi2_clk_sel field of register CCM_CS2CDR contains '110' which is marked as 'reserved', so we can't rely on the default value. Provide a proper parent for QSPI clocks to avoid a kernel oops: [ 1.037920] Division by zero in kernel. [ 1.041807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc7-next-20141204-00002-g5aa23e1 #2143 [ 1.050967] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 1.056853] Backtrace: [ 1.059360] [<80011ea0>] (dump_backtrace) from [<8001203c>] (show_stack+0x18/0x1c) [ 1.066982] r6:00000000 r5:00000000 r4:00000000 r3:00000000 [ 1.072754] [<80012024>] (show_stack) from [<806b7100>] (dump_stack+0x88/0xa4) [ 1.080038] [<806b7078>] (dump_stack) from [<80011d20>] (__div0+0x18/0x20) [ 1.086958] r5:be018500 r4:be017c00 [ 1.090600] [<80011d08>] (__div0) from [<802aa418>] (Ldiv0+0x8/0x10) [ 1.097012] [<80504fbc>] (clk_divider_set_rate) from [<80503ddc>] (clk_change_rate+0x14c/0x17c) [ 1.105759] r7:00000000 r6:00000000 r5:be018500 r4:00000000 [ 1.111516] [<80503c90>] (clk_change_rate) from [<80503ea0>] (clk_set_rate+0x94/0x98) [ 1.119391] r8:be7e0368 r7:00000000 r6:be11a000 r5:be018500 r4:00000000 r3:00000000 [ 1.127290] [<80503e0c>] (clk_set_rate) from [<80410558>] (fsl_qspi_probe+0x23c/0x75c) [ 1.135260] r5:be11a010 r4:be350010 [ 1.138900] [<8041031c>] (fsl_qspi_probe) from [<80385a18>] (platform_drv_probe+0x50/0xac) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | ARM: clk-imx6q: fix video divider for rev T0 1.0Gary Bisson2014-12-291-1/+1
|/ | | | | | | | | | | | The post dividers do not work on i.MX6Q rev T0 1.0 so they must be fixed to 1. As the table index was wrong, a divider a of 4 could still be requested which implied the clock not to be set properly. This is the root cause of the HDMI not working at high resolution on rev T0 1.0 of the SoC. Signed-off-by: Gary Bisson <bisson.gary@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2014-12-141-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
| * Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman2014-11-031-1/+0
| |\ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
| | * ARM: mach-imx: drop owner assignment from platform_driversWolfram Sang2014-10-201-1/+0
| | | | | | | | | | | | | | | | | | | | | A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
* | | Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds2014-12-103-5/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
| * | | cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logicDaniel Lezcano2014-11-123-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only place where the time is invalid is when the ACPI_CSTATE_FFH entry method is not set. Otherwise for all the drivers, the time can be correctly measured. Instead of duplicating the CPUIDLE_FLAG_TIME_VALID flag in all the drivers for all the states, just invert the logic by replacing it by the flag CPUIDLE_FLAG_TIME_INVALID, hence we can set this flag only for the acpi idle driver, remove the former flag from all the drivers and invert the logic with this flag in the different governor. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | Merge tag 'soc-for-linus' of ↵Linus Torvalds2014-12-0916-25/+345
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support, notable changes include: - bcm: brcmstb SMP support initial iproc/cygnus support - exynos: Exynos4415 SoC support PMU and suspend support for Exynos5420 PMU support for Exynos3250 pm related maintenance - imx: new LS1021A SoC support vybrid 610 global timer support - integrator: convert to using multiplatform configuration - mediatek: earlyprintk support for mt8127/mt8135 - meson: meson8 soc and l2 cache controller support - mvebu: Armada 38x CPU hotplug support drop support for prerelease Armada 375 Z1 stepping extended suspend support, now works on Armada 370/XP - omap: hwmod related maintenance prcm cleanup - pxa: initial pxa27x DT handling - rockchip: SMP support for rk3288 add cpu frequency scaling support - shmobile: r8a7740 power domain support various small restart, timer, pci apmu changes - sunxi: Allwinner A80 (sun9i) earlyprintk support - ux500: power domain support Overall, a significant chunk of changes, coming mostly from the usual suspects: omap, shmobile, samsung and mvebu, all of which already contain a lot of platform specific code in arch/arm" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits) ARM: mvebu: use the cpufreq-dt platform_data for independent clocks soc: integrator: Add terminating entry for integrator_cm_match ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support ARM: add lolevel debug support for asm9260 ARM: add mach-asm9260 ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf power: reset: imx-snvs-poweroff: add power off driver for i.mx6 ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A ...
| * | | | ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021AArnd Bergmann2014-11-231-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The newly introduced LS1021A SoC selects CONFIG_SOC_FSL, which is originally symbol used for the PowerPC based platforms and guards lots of code that does not build on ARM. This breaks allmodconfig, so let's remove it for now, until either all those drivers are fixed or they use a dependency on IMX instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | ARM: imx: clk-vf610: get input clocks from assigned clocksStefan Agner2014-11-231-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the clock assignment device tree changes, the clocks get initialized properly but the search for those clocks fails with errors: [ 0.000000] i.MX clk 4: register failed with -17 [ 0.000000] i.MX clk 5: register failed with -17 This is because the module can't find those clocks anymore, and tries to initialize fixed clocks with the same name. Get the clock modules input clocks from the assigned clocks by default by using of_clk_get_by_name(). If this function returns not a valid clock, fall back to the old behaviour and search the input clock from the device tree's /clocks/$name node. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | ARM: imx: Add Freescale LS1021A SMP supportJingchang Lu2014-11-234-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale LS1021A SoCs deploy two cortex-A7 processors, this adds bring-up support for the secondary core. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | ARM: imx: Add initial support for Freescale LS1021AJingchang Lu2014-11-233-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LS1021A SoC is a dual-core Cortex-A7 based processor, this adds the initial support for it. Signed-off-by: Jingchang Lu <b35083@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | ARM: imx53: add cpufreq supportLucas Stach2014-11-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instanciate device for the generic cpufreq-dt driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| * | | | ARM: imx53: clk: add ARM clockLucas Stach2014-11-231-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ARM clock is a virtual clock feeding the ARM partition of the SoC. It controls multiple other clocks to ensure the right sequencing when cpufreq changes the CPU clock rate. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | | ARM: imx: add CPU clock typeLucas Stach2014-11-233-1/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements a virtual clock used to abstract away all the steps needed in order to change the ARM clock, so we don't have to push all this clock handling into the cpufreq driver. While it will be used for i.MX53 at first it is generic enough to be used on i.MX6 later on. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
OpenPOWER on IntegriCloud