summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci/gpio.c
Commit message (Collapse)AuthorAgeFilesLines
* Davinci: gpio - use ioremap()Cyril Chemparathy2010-05-131-7/+11
| | | | | | | | | This patch modifies the gpio_base definition in davinci_soc_info to be a physical address, which is then ioremap()ed by the gpio initialization function. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: eliminate pinmux offset verbosityCyril Chemparathy2010-05-061-5/+1
| | | | | | | | | | | Pinmux registers are sequential, and do not need to be enumerated out as they currently are. This reduces code volume and keeps things simple. If some future SoC comes up with a discontiguous register map, PINMUX() can then be expanded with local token pasting. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - fine grained lockingCyril Chemparathy2010-05-061-4/+5
| | | | | | | | | | This patch eliminates the global gpio_lock, and implements a per-controller lock instead. This also switches to irqsave/irqrestore locks in case gpios are manipulated in isr. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - controller type supportCyril Chemparathy2010-05-061-0/+3
| | | | | | | | | | | | | This patch allows for gpio controllers that deviate from those found on traditional davinci socs. davinci_soc_info has an added field to indicate the soc-specific gpio controller type. The gpio initialization code then bails out if necessary. More elements (tnetv107x) to be added later into enum davinci_gpio_type. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - register layout invariant inlinesCyril Chemparathy2010-05-061-3/+38
| | | | | | | | | | | | | | | | | | | | | | This patch renders the inlined gpio accessors in gpio.h independent of the underlying controller's register layout. This is done by including three new fields in davinci_gpio_controller to hold the addresses of the set, clear, and in data registers. Other changes: 1. davinci_gpio_regs structure definition moved to gpio.c. This structure is no longer common across all davinci socs (davinci_gpio_controller is). 2. controller base address calculation code (gpio2controller()) moved to gpio.c as this was no longer necessary for the inline implementation. 3. modified inline range checks to use davinci_soc_info.gpio_num instead of DAVINCI_N_GPIO. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - structs and functions renamedCyril Chemparathy2010-05-061-28/+22
| | | | | | | | | | | | | | | | Renamed gpio types to something more sensible: struct gpio_controller --> struct davinci_gpio_regs struct davinci_gpio --> struct davinci_gpio_controller gpio2controller() --> gpio2regs() irq2controller() --> irq2regs() This change also moves davinci_gpio_controller definition to gpio.h. Eventually, the gpio registers structure will be moved to gpio.c and no longer a common cross-soc definition. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Davinci: gpio - minor cleanupCyril Chemparathy2010-05-061-23/+27
| | | | | | | | | macroized repeated container_of()s to improve readability. unified direction in/out functions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: sparse: gpio: void castingKevin Hilman2010-05-061-9/+18
| | | | | | | | Cleanup usage of void pointers when using genirq. genirq API takes and returns void *, where this GPIO API is using those as __iomem pointers. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: misc cleanups from sparseKevin Hilman2010-05-061-12/+12
| | | | | | | | - Convert data/functions to static - include headers for missing declarations - pointer cleanups: struct foo *__iomem f --> struct foo __iomem *f; Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* DaVinci: remove unneeded #include'sSergei Shtylyov2009-11-251-9/+0
| | | | | | | | | | There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: dm365 gpio irq supportDavid Brownell2009-08-261-6/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support DM365 GPIOs ... primarily by handling non-banked GPIO IRQs: - Flag DM365 chips as using non-banked GPIO interrupts, using a new soc_info field. - Replace the gpio_to_irq() mapping logic. This now uses some runtime infrastructure, keyed off that new soc_info field, which doesn't handle irq_to_gpio(). - Provide a new irq_chip ... GPIO IRQs handled directly by AINTC still need edge triggering managed by the GPIO controller. DM365 chips no longer falsely report 104 GPIO IRQs as they boot. Intelligence about IRQ muxing is missing, so for the moment this only exposes the first eight DM365 GPIOs, which are never muxed. The next eight are muxed, half with Ethernet (which uses most of those pins anyway). Tested on DM355 (10 unbanked IRQs _or_ 104 banked ones) and also on DM365 (16 unbanked ones, only 8 made available). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: Make GPIO code more genericMark A. Greer2009-05-281-25/+14
| | | | | | | | | | | | | | | | | | The current gpio code needs to know the number of gpio irqs there are and what the bank irq number is. To determine those values, it checks the SoC type. It also assumes that the base address and the number of irqs the interrupt controller uses is fixed. To clean up the SoC checks and make it support different base addresses and interrupt controllers, have the SoC-specific code set those values in the soc_info structure and have the gpio code reference them there. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: fixups for banked GPIO interrupt handlingKevin Hilman2009-05-261-1/+3
| | | | | | | | | | | | This patch seems to get me much more reliable performance using the GPIO banked interrupts on dm355 for the dm9000 driver. Changes include: - init GPIO handling along with normal GPIO init - mask the level-sensitive bank IRQ during handling Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: gpio irq enable tweaksDavid Brownell2009-05-261-6/+14
| | | | | | | | | | | | | | | | | Fix two IRQ triggering bugs affecting GPIO IRQs: - Make sure enabling with IRQ_TYPE_NONE ("default, unspecified") isn't a NOP ... default to both edges, at least one must work. - As noted by Kevin Hilman, setting the irq trigger type for a banked gpio interrupt shouldn't enable irqs that are disabled. Since GPIO IRQs haven't been used much yet, it's not clear these bugs could have affected anything. The few current users don't seem to have been obviously suffering from these issues. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* davinci: gpio bugfixesDavid Brownell2009-04-271-23/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the DaVinci GPIO code to work better on non-dm6446 parts, notably the dm355: - Only handle the number of GPIOs the chip actually has. So for example on dm6467, GPIO-42 is the last GPIO, and trying to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446. - Enable GPIO interrupts on each 16-bit GPIO-irq bank ... previously, only the first five were enabled, so GPIO-80 and above (on dm355) wouldn't trigger IRQs. - Use the right IRQ for each GPIO bank. The wrong values were used for dm355 chips, so GPIO IRQs got routed incorrectly. - Handle up to four pairs of 16-bit GPIO banks ... previously only three were handled, so accessing GPIO-96 and up (e.g. on dm355) would oops. - Update several comments that were dm6446-specific. Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs on the DM355 EVM. One thing this doesn't do is handle the way some of the GPIO numbers on dm6467 are reserved but aren't valid as GPIOs. Some bitmap logic could fix that if needed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* Merge branch 'for-rmk' of git://source.mvista.com/git/linux-davinci-2.6.gitRussell King2008-10-091-62/+71
|\ | | | | | | Merge branch 'davinci' into devel
| * ARM: DaVinci: SOC GPIOs use gpiolibDavid Brownell2008-09-171-62/+71
| | | | | | | | | | | | | | | | Switch DaVinci SOC gpios over to using the new GPIO library, so it can access GPIO expanders and other non-SOC GPIOs using the same calls. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* | [ARM] 5298/1: Drop desc_handle_irq()Dmitry Baryshkov2008-10-091-4/+1
|/ | | | | | | | desc_handle_irq() was declared as obsolete since long ago. Replace it with generic_handle_irq() Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2008-08-071-3/+3
| | | | | | This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4457/2: davinci: GPIO supportVladimir Barinov2007-07-121-0/+286
Support GPIO driver for TI DaVinci SoC Signed-off-by: Vladimir Barinov <vbarino@ru.mvista.com> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
OpenPOWER on IntegriCloud