summaryrefslogtreecommitdiffstats
path: root/arch/arm/kernel/bios32.c
Commit message (Collapse)AuthorAgeFilesLines
* ARM/PCI: Call pcie_bus_configure_settings() to set MPSMurali Karicheri2014-05-301-0/+12
| | | | | | | | | | | | | | Call pcie_bus_configure_settings() on ARM, like for other platforms. pcie_bus_configure_settings() makes sure the MPS across the bus is uniform and provides the ability to tune the MRSS and MPS to higher performance values. This is particularly important for embedded where there is no firmware to program these PCIe settings for the OS. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Russell King <linux@arm.linux.org.uk> CC: Arnd Bergmann <arnd@arndb.de> CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
* Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2014-04-051-34/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
| * ARM: 7986/1: bios32: use pci_enable_resource to enable PCI resourcesWill Deacon2014-02-251-34/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves bios32 over to using the generic code for enabling PCI resources. Since the core code takes care of bridge resources too, we can also drop the explicit IO and MEMORY enabling for them in the arch code. A side-effect of this change is that we no longer explicitly enable devices when running in PCI_PROBE_ONLY mode. This stays closer to the meaning of the option and prevents us from trying to enable devices without any assigned resources (the core code refuses to enable resources without parents). Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'pci/misc' into nextBjorn Helgaas2014-02-181-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/misc: PCI: Enable INTx if BIOS left them disabled ia64/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device x86/PCI: Set IORESOURCE_ROM_SHADOW only for the default VGA device PCI: Update outdated comment for pcibios_bus_report_status() PCI: Cleanup per-arch list of object files PCI: cpqphp: Fix hex vs decimal typo in cpqhpc_probe() x86/PCI: Fix function definition whitespace x86/PCI: Reword comments x86/PCI: Remove unnecessary local variable initialization PCI: Remove unnecessary list_empty(&pci_pme_list) check
| * | PCI: Update outdated comment for pcibios_bus_report_status()Yijing Wang2014-02-141-1/+1
| |/ | | | | | | | | | | pci_find_device() has been superseded by pci_get_device(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | ARM/PCI: Use list_for_each_entry() for bus traversalYijing Wang2014-02-141-5/+2
|/ | | | | | | Replace list_for_each() + pci_bus_b() with list_for_each_entry(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge tag 'soc-for-linus' of ↵Linus Torvalds2013-09-061-0/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
| * ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pciThomas Petazzoni2013-08-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI drivers may need to adjust the pci_bus structure after it has been allocated by the Linux PCI core. The PCI core allows architectures to implement the pcibios_add_bus() and pcibios_remove_bus() for this purpose. This commit therefore extends the hw_pci and pci_sys_data structures of the ARM PCI core to allow PCI drivers to register ->add_bus() and ->remove_bus() in hw_pci, which will get called when a bus is added or removed from the system. This will be used for example by the Marvell PCIe driver to connect a particular PCI bus with its corresponding MSI chip to handle Message Signaled Interrupts. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Daniel Price <daniel.price@gmail.com> Tested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | PCI: Delay enabling bridges until they're neededYinghai Lu2013-07-251-5/+0
|/ | | | | | | | | | | | | We currently enable PCI bridges after scanning a bus and assigning resources. This is often done in arch code. This patch changes this so we don't enable a bridge until necessary, i.e., until we enable a PCI device behind the bridge. We do this in the generic pci_enable_device() path, so this also removes the arch-specific code to enable bridges. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* ARM: pci: create pci_common_init_dev()Linus Walleij2013-06-031-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When working with device tree support for PCI on ARM you run into a problem when mapping IRQs from the device tree irqmaps: doing this the code in drivers/of/of_pci_irq.c will try to find the OF node on the root bridge and this fails, because bus->dev.of_node is NULL, and that in turn boils down to the fact that pci_set_bus_of_node() has called pcibios_get_phb_of_node() from drivers/pci/of.c to obtain the OF node of the bridge or its parent and none is set and thus NULL is returned. Fix this by adding an additional parent argument API for registering PCI bridges on the ARM architecture called pci_common_init_dev(), and pass along this parent to pci_scan_root_bus() called from pcibios_init_hw() in bios32.c and voila: the IRQ mappings start working: the OF node can be retrieved from the parent. Create the old pci_common_init() as a wrapper around the new call. Cc: Mike Rapoport <mike@compulab.co.il> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmitt <benh@kernel.crashing.org> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: 7683/1: pci: add a align_resource hookThomas Petazzoni2013-04-031-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The PCI specifications says that an I/O region must be aligned on a 4 KB boundary, and a memory region aligned on a 1 MB boundary. However, the Marvell PCIe interfaces rely on address decoding windows (which allow to associate a range of physical addresses with a given device). For PCIe memory windows, those windows are defined with a 1 MB granularity (which matches the PCI specs), but PCIe I/O windows can only be defined with a 64 KB granularity, so they have to be 64 KB aligned. We therefore need to tell the PCI core about this special alignement requirement. The PCI core already calls pcibios_align_resource() in the ARM PCI core, specifically for such purposes. So this patch extends the ARM PCI core so that it calls a ->align_resource() hook registered by the PCI driver, exactly like the existing ->map_irq() and ->swizzle() hooks. A particular PCI driver can register a align_resource() hook, and do its own specific alignement, depending on the specific constraints of the underlying hardware. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7648/1: pci: Allow passing per-controller private dataThierry Reding2013-02-161-0/+3
| | | | | | | | | | | In order to allow drivers to specify private data for each controller, this commit adds a private_data field to the struct hw_pci. This field is an array of nr_controllers pointers that will be used to initialize the private_data field of the corresponding controller's pci_sys_data structure. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 7647/1: pci: Keep pci_common_init() around after initThierry Reding2013-02-161-3/+3
| | | | | | | | When using deferred driver probing, PCI host controller drivers may actually require this function after the init stage. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: drivers: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-10/+8
| | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-10-011-5/+49
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
| * Merge branch 'cleanup/io-pci' into next/cleanupsArnd Bergmann2012-08-131-5/+49
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From Rob Herring <robherring2@gmail.com>: This is the 2nd part of mach/io.h removals. This series removes io.h on platforms with PCI by creating a fixed virtual I/O mapping and a common __io() macro. This version has changed a bit to accommodate Tegra converting its PCIe host to a platform driver. Now the virtual space is only reserved during early boot before .map_io() is called. The mapping is not created until calling pci_ioremap_io which can be done at any point after vmalloc is initialized. I've gone back to fixed 64K windows for each PCI bus. This allows removing all the i/o resource setup from the individually platforms and placing it within the common ARM PCI code. I've only tested versatilepb under qemu (with the model hacked up to actually enable i/o space), so any testing is appreciated. iop3xx and mv78xx0 have some risk of breaking as the PCI bus addresses are moved to 0 from matching the cpu host bus addesss. * cleanup/io-pci: ARM: iop3xx: use fixed PCI i/o mapping ARM: mv78xx0: use fixed pci i/o mapping ARM: iop13xx: use fixed PCI i/o mapping iop13xx: use more regular PCI I/O space handling ARM: orion5x: use fixed PCI i/o mapping ARM: kirkwood: use fixed PCI i/o mapping ARM: dove: use fixed PCI i/o mapping ARM: footbridge: use fixed PCI i/o mapping ARM: shark: use fixed PCI i/o mapping ARM: integrator: remove trailing whitespace on pci_v3.c ARM: integrator: use fixed PCI i/o mapping ARM: tegra: use fixed PCI i/o mapping ARM: versatile: use fixed PCI i/o mapping ARM: move PCI i/o resource setup into common code ARM: Add fixed PCI i/o mapping i2c: iop3xx: use standard gpiolib functions i2c: iop3xx: clean-up trailing whitespace Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: move PCI i/o resource setup into common codeRob Herring2012-07-261-5/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With consolidation of the PCI i/o mappings, the i/o space is being set to start at a PCI bus addr of 0x0 and fixed to 64K per bus. In this case the core ARM PCI setup code can setup the i/o resource. Currently, the resource is only setup if the platform did not setup an i/o resource. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
| | * ARM: Add fixed PCI i/o mappingRob Herring2012-07-251-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a fixed virtual mapping for PCI i/o addresses. The mapping is located at the last 2MB of vmalloc region (0xfee00000-0xff000000). 2MB is used to align with PMD size, but IO_SPACE_LIMIT is 1MB. The space is reserved after .map_io and can be mapped at any time later with pci_ioremap_io. Platforms which need early i/o mapping (e.g. for vga console) can call pci_map_io_early in their .map_io function. This has changed completely from the 1st implementation which only supported creating the static mapping at .map_io. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org>
* | | PCI: Provide a default pcibios_update_irq()Thierry Reding2012-09-181-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Most architectures implement this in exactly the same way. Instead of having each architecture duplicate this function, provide a single implementation in the core and make it a weak symbol so that it can be overridden on architectures where it is required. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | PCI: Discard __init annotations for pci_fixup_irqs() and related functionsThierry Reding2012-09-181-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | Remove the __init annotations in order to keep pci_fixup_irqs() around after init (e.g. for hotplug). This requires the same change for the implementation of pcibios_update_irq() on all architectures. While at it, all __devinit annotations are removed as well, since they will be useless now that HOTPLUG is always on. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge branch 'topic/sebastian-devinit-fixups' into nextBjorn Helgaas2012-06-181-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * topic/sebastian-devinit-fixups: scripts/modpost: check for bad references in .pci.fixups area sh/PCI: move fixup hooks from __init to __devinit powerpc/PCI: move fixup hooks from __init to __devinit frv/PCI: move fixup hooks from __init to __devinit arm/PCI: move fixup hooks from __init to __devinit alpha/PCI: move fixup hooks from __init to __devinit PCI: move fixup hooks from __init to __devinit x86/PCI: move fixup hooks from __init to __devinit
| * | arm/PCI: move fixup hooks from __init to __devinitSebastian Andrzej Siewior2012-06-121-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The fixups are executed once the pci-device is found which is during boot process so __init seems fine as long as the platform does not support hotplug. However it is possible to remove the PCI bus at run time and have it rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call the fixups again. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu2012-06-131-1/+1
|/ | | | | | | | | Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* ARM: PCI: remove per-pci_hw list of busesRussell King2012-05-161-6/+5
| | | | | | | No one uses the per-hw list of buses, so get rid of this. Instead, build the list locally. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: PCI: provide a default bus scan implementationRussell King2012-05-131-1/+5
| | | | | | | | | | Most PCI implementations perform simple root bus scanning. Rather than having each group of platforms provide a duplicated bus scan function, provide the PCI configuration ops structure via the hw_pci structure, and call the root bus scanning function from core ARM PCI code. Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: PCI: get rid of pci_std_swizzle()Russell King2012-05-131-3/+16
| | | | | | | | | | | | | | | | | | Most PCI implementations use the standard PCI swizzle function, which handles the well defined behaviour of PCI-to-PCI bridges which can be found on cards (eg, four port ethernet cards.) Rather than having almost every platform specify the standard swizzle function, make this the default when no swizzle function is supplied. Therefore, a swizzle function only needs to be provided when there is something exceptional which needs to be handled. This gets rid of the swizzle initializer from 47 files, and leaves us with just two platforms specifying a swizzle function: ARM Integrator and Chalice CATS. Acked-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: PCI: remove unused sys->hwRussell King2012-04-261-1/+0
| | | | | | | | | | | Some platforms mark their hw_pci structure as __initdata, which means it will be discarded after init time. Storing pointers to __initdata in long lived data structures is a potential source of problems, and in this case, sys->hw is unused apart from its initialization. So, lets remove this member and its initializer. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: fix bios32.c build warningRussell King2012-03-301-1/+0
| | | | | | | | | arch/arm/kernel/bios32.c: In function 'pcibios_fixup_bus': arch/arm/kernel/bios32.c:302: warning: unused variable 'root' caused by 9f786d033 (arm/PCI: get rid of device resource fixups) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* arm/PCI: don't export pci_flagsBjorn Helgaas2012-03-201-1/+0
| | | | | | | | | | | There's no need to export pci_flags; it's not exported by any other architecture, and no modules reference it. CC: Rob Herring <rob.herring@calxeda.com> CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* arm/PCI: get rid of device resource fixupsBjorn Helgaas2012-02-231-65/+4
| | | | | | | | Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* arm/PCI: use pci_flags PCI_PROBE_ONLY instead of arm-specific flagBjorn Helgaas2012-02-231-3/+2
| | | | | | CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* arm/PCI: remove arch pci_flags definitionBjorn Helgaas2012-02-231-0/+2
| | | | | | | | | | | | | | The PCI core provides a pci_flags definition (currently __weak), so drop the arm definition in favor of that. We EXPORT_SYMBOL(pci_flags) as arm did previously. I'm dubious about this: no other architecture exports it, and I didn't see any modules in the tree that reference it. CC: Rob Herring <rob.herring@calxeda.com> CC: Russell King <linux@arm.linux.org.uk> CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* arm/PCI: convert to pci_scan_root_bus() for correct root bus resourcesBjorn Helgaas2012-01-061-19/+8
| | | | | | | | | | Convert from pci_scan_bus() to pci_scan_root_bus() and remove root bus resource fixups. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: ARM: convert pcibios_set_master() to a non-inlined functionMyron Stowe2012-01-061-0/+7
| | | | | | | | | | | | | | | | | | | | | | | This patch converts ARM's architecture-specific inlined 'pcibios_set_master()' routine to a non-inlined function. This will allow follow on patches to create a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over- ridden by architecture-specific code. Converting 'pci_bios_set_master()' to a non-inlined function will allow ARM's 'pcibios_set_master()' implementation to remain architecture- specific after the generic version is introduced and thus, not change current behavior. Note that ARM also has a non-inlined 'pcibios_set_master()' that is used if CONFIG_PCI_HOST_ITE8152 is defined. This patch does not change any behavior here either. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* arm: convert core files from module.h to export.hPaul Gortmaker2011-10-311-1/+1
| | | | | | | | | | | | Many of the core ARM kernel files are not modules, but just including module.h for exporting symbols. Now these files can use the lighter footprint export.h for this role. There are probably lots more, but ARM files of mach-* and plat-* don't get coverage via a simple yesconfig build. They will have to be cleaned up and tested via using their respective configs. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ARM: pci: always export pcibios_bus_to_resourceArnd Bergmann2011-10-011-5/+4
| | | | | | | | | | | | | | | Some PCI drivers call pcibios_bus_to_resource directly, but it is only exported when CONFIG_HOTPLUG is set, because it was initially mean for pccard support. Moving the export out of the #ifdef lets us avoid these build errors: ERROR: "pcibios_bus_to_resource" [drivers/video/vt8623fb.ko] undefined! ERROR: "pcibios_bus_to_resource" [drivers/video/arkfb.ko] undefined! ERROR: "pcibios_bus_to_resource" [drivers/video/s3fb.ko] undefined! Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* PCI: Make the struct pci_dev * argument of pci_fixup_irqs const.Ralf Baechle2011-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: "David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: Paul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* arm: bios32: Remove non exisiting machine codeThomas Gleixner2011-03-291-25/+0
| | | | | | | The id removal left this machine check in which breaks the build on some platforms. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* ARM: 6608/1: enable bridges in pci_common_init.Colin Tuckley2011-02-231-0/+5
| | | | | | | | | Add a missing call to pci_enable_bridges() so that devices behind bridges get found by the pci bus scan. Signed-off-by: Chris Partington <chris.partington@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6058/1: Add support for PCI domainsAnton Vorontsov2010-04-221-0/+3
| | | | | | | | | | | This patch adds support for PCI domains on ARM platforms. Also, protect asm/mach/pci.h from multiple inclustions, otherwise build fails because of pci_domain_nr() and pci_proc_domain() redefinitions. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* resource/PCI: mark struct resource as constDominik Brodowski2010-02-221-1/+1
| | | | | | | | | | | Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* resource/PCI: align functions now return start of resourceDominik Brodowski2010-02-221-3/+5
| | | | | | | | | | | As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: arm: use generic INTx swizzle from PCI coreBjorn Helgaas2009-01-071-27/+0
| | | | | | | Use the generic pci_common_swizzle() instead of arch-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: arm: use generic pci_swizzle_interrupt_pin()Bjorn Helgaas2009-01-071-3/+3
| | | | | | | | Use the generic pci_swizzle_interrupt_pin() instead of arch-specific code. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* [ARM] Convert asm/io.h to linux/io.hRussell King2008-09-061-1/+1
| | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] 4577/1: ITE 8152 PCI bridge supportMike Rapoport2007-10-151-3/+25
| | | | | | | This patch provides driver for ITE 8152 PCI bridge. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] Resolve PCI section warningsRussell King2007-09-301-2/+2
| | | | | | | | | | | | | | | | | Fix the following (valid) section warnings: WARNING: vmlinux.o(.text+0xf7b5c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bridge') WARNING: vmlinux.o(.text+0xfc5f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_unmap_rom') WARNING: vmlinux.o(.text+0xfc824): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0xfd6d8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd730): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd788): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd7e0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfe024): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe0f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe17c): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* [ARM] arch/arm/kernel/bios32.c: no need to set isa_bridgeAdrian Bunk2006-07-131-11/+0
| | | | | | | | Since this assignment was the only place on !alpha where isa_bridge was touched, it didn't have any effect. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman2006-06-271-3/+3
| | | | | | | | Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud