summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: imx25-pdk: Provide a regulator for Ethernet PHYFabio Estevam2014-04-301-0/+18
| | | | | | | | GPIO2_3 controls the power to the Ethernet PHY, so provide a regulator node for this. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx25-pdk: Add FEC pinsFabio Estevam2014-04-301-0/+16
| | | | | | | | Instead of relying on the bootloader for configuring the FEC pins, pass the FEC pin configuration via device tree instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx25-pdk: Add UART1 pinsFabio Estevam2014-04-301-0/+16
| | | | | | | | | | UART1 is the console port on mx25pdk board. Add the pin configuration for UART1 port and also pass 'fsl,uart-has-rtscts' to indicate that the port has RTS and CTS pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx25-pdk: Sort the dt nodesFabio Estevam2014-04-301-4/+4
| | | | | | | Keep the dt nodes sorted for better readability. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6qdl-sabresd.dtsi: Add red ledVincent Stehlé2014-04-301-0/+19
| | | | | | | | | | | Make the red gpio led available to the user. This can be toggled with the sysfs for example, or used as a heartbeat or mmc activity light by changing the trigger. Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-som: Enable SSI1Alexander Shiyan2014-04-301-0/+16
| | | | | | | | | This patch adds pin group for Synchronous Serial Interface 1 (SSI1) for PCM-038 module and enables this interface. This change do nothing at the current stage but helps to continue develop sound support. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx27-phytec-phycore-rdk: Add missing pinctrl definition for SPI CS1Alexander Shiyan2014-04-301-0/+7
| | | | | | | This patch adds missing pinctrl definition for SPI chipselect 1. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx: Add alias for ethernet controllerMarek Vasut2014-04-308-0/+8
| | | | | | | | Add alias for FEC ethernet on i.MX to allow bootloaders (like U-Boot) patch-in the MAC address for FEC using this alias. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mbimxsd35: Add sound support.Denis Carikli2014-04-301-0/+9
| | | | | | | | | | | Cc: Eric Bénard <eric@eukrea.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'zynq-dt-fixes-for-3.15' of git://git.xilinx.com/linux-xlnx into fixesArnd Bergmann2014-04-253-0/+167
|\ | | | | | | | | | | | | | | | | | | | | | | | | arm: Xilinx Zynq DT fixes for v3.15 - Enable Zynq I2c - Fix cpufreq DT binding * tag 'zynq-dt-fixes-for-3.15' of git://git.xilinx.com/linux-xlnx: ARM: zynq: dt: Add I2C nodes to Zynq device tree ARM: zynq: DT: Add 'clock-latency' property Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * ARM: zynq: dt: Add I2C nodes to Zynq device treeSoren Brinkmann2014-04-223-0/+166
| | | | | | | | | | | | Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * ARM: zynq: DT: Add 'clock-latency' propertySoren Brinkmann2014-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | Specify the 'clock-latency' property to avoid certain cpufreq governors from refusing to work with the following error: ondemand governor failed, too long transition latency of HW, fallback to performance governor Reported-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge tag 'vexpress/fixes-for-3.15' of ↵Arnd Bergmann2014-04-241-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/pawel.moll/linux into fixes ARM Versatile Express fixes for 3.15 This series contains straight-forward fixes for different Versatile Express infrastructure drivers: - NULL pointer dereference on the error path in the clk driver - out of boundary array access in the dcscb driver - broken restart/power off implementation - mis-interpreted voltage unit in the spc driver * tag 'vexpress/fixes-for-3.15' of git://git.linaro.org/people/pawel.moll/linux: ARM: vexpress/TC2: Convert OPP voltage to uV before storing power/reset: vexpress: Fix restart/power off operation arm/mach-vexpress: array accessed out of bounds clk: vexpress: NULL dereference on error path Includes an update to 3.15-rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | Shiraz has movedViresh Kumar2014-04-181-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | ARM: tegra: remove UART5/UARTE from tegra124.dtsiStephen Warren2014-04-241-13/+0
| | | | | | | | | | | | | | | | | | | | Tegra124 only has 4 UARTs. Parts of the documentation hint at a fifth UART, but this appears to be left-over from earlier SoC documentation. Remove the non-existent DT node for UART5. Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | Merge tag 'omap-for-v3.15/fixes-v2-signed' of ↵Arnd Bergmann2014-04-2414-24/+44
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps, mostly to fix some GPMC, DSS and USB issues for device tree based booting. And turns out BeagleBoard xM A/B needs it's own minimal dts in addition to the related u-boot changes. Also few minor documentation and typo fixes are merged to get them out of the way. * tag 'omap-for-v3.15/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Fix GPMC remap for devices using an offset ARM: OMAP2+: Fix oops for GPMC free ARM: dts: Add support for the BeagleBoard xM A/B ARM: dts: Grammar /that will/it will/ ARM: dts: Grammar /is uses/ is used/ ARM: OMAP2+: Fix config name for USB3 PHY ARM: dts: am335x: update USB DT references ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand ARM: AM335X: EVM: fix pinmux documentation in devicetree ARM: OMAP2+: N900: remove omapdss init for DT boot ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shift ARM: dts: omap5: Add clocks to USB3 PHY node ARM: OMAP2+: hwmod: fix missing braces in _init() ARM: AM43xx: fix dpll init in bypass mode ARM: OMAP3: hwmod data: Correct clock domains for USB modules ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: dts: Add support for the BeagleBoard xM A/BRobert Nelson2014-04-182-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard xM A/B has an inverted usb hub enable line vs the xM C Signed-off-by: Robert Nelson <robertcnelson@gmail.com> [tony@atomide.com: updated for missing bracket] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: dts: Grammar /that will/it will/Geert Uytterhoeven2014-04-185-6/+6
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: dts: Grammar /is uses/ is used/Geert Uytterhoeven2014-04-184-4/+4
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: dts: am335x: update USB DT referencesLeigh Brown2014-04-184-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In "ARM: dts: am33xx: correcting dt node unit address for usb", the usb_ctrl_mod and cppi41dma nodes were updated with the correct register addresses. However, the dts files that reference these nodes were not updated, and those devices are no longer being enabled. This patch corrects the references for the affected dts files. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nandJohan Hovold2014-04-183-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove all remaining uses of gpmc,device-nand that have been added since the property was removed by commit f40739faba8e ("ARM: dts: OMAP2+: Simplify NAND support"). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: AM335X: EVM: fix pinmux documentation in devicetreeWolfram Sang2014-04-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Wrong documentation in pinmux description can be especially confusing. Keep it proper. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: dts: dra7xx-clocks: Correct mcasp2_ahclkx_mux bit-shiftPeter Ujfalusi2014-04-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The correct bit is 24 for AHCLKX. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: dts: omap5: Add clocks to USB3 PHY nodeRoger Quadros2014-04-181-0/+6
| |/ | | | | | | | | | | | | | | | | | | | | The USB3 PHY driver (ti-pipe3) was updated so that the relevant clock phandles are expected in the DT node. Provide the necessary clocks. Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'renesas-fixes-for-v3.15' of ↵Arnd Bergmann2014-04-243-5/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes Updates for v3.15 r8a7791 (R-Car M2) based koelsch board * Correct renesas,gpios to renesas,groups in sd[012] pfc 8a7790 (R-Car H2) based lager board * Correct SND_SOC_DAIFMT_CBx_CFx flags r8a7740 (R-Mobile A1) SoC * Drop address cells from GIC node r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Correct SND_SOC_DAIFMT_CBx_CFx flags sh73a0 (SH-Mobile AG5) SoC * Drop address cells from GIC node * tag 'renesas-fixes-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfc ARM: shmobile: r8a7740: drop address cells from GIC node ARM: shmobile: sh73a0: drop address cells from GIC node ARM: shmobile: armadillo800eva: fixup SND_SOC_DAIFMT_CBx_CFx flags ARM: shmobile: lager: fixup SND_SOC_DAIFMT_CBx_CFx flags Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: shmobile: koelsch: correct renesas,gpios to renesas,groups in sd[012] pfcMagnus Damm2014-04-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typo of renesas,groups in the koeslch dt. The kernel has no renesas,gpios but this should match renesas,groups. Noticed thanks to similar fix for Lager by Rob Taylor and Ben Dooks. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | ARM: shmobile: r8a7740: drop address cells from GIC nodeLucas Stach2014-04-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * | ARM: shmobile: sh73a0: drop address cells from GIC nodeLucas Stach2014-04-151-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | Merge tag 'renesas-dt5-for-v3.15' of ↵Arnd Bergmann2014-04-241-2/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Fifth Round of Renesas ARM Based SoC DT Updates for v3.15 Correct renesas,groups in SDHI nodes of for r8a7790 (R-Car H2) based Lager board. * tag 'renesas-dt5-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: correct renesas,gpios to renesas,groups in sd[02] pfc Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | ARM: shmobile: lager: correct renesas,gpios to renesas,groups in sd[02] pfcRob Taylor2014-04-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix probable typo of renesas,groups in the lager dt. The kernel has no renesas,gpios but this should match renesas,groups. Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk> [ben.dooks@codethink.co.uk: fixup description] Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | | Merge tag 'v3.15-rockchip-fixes1' of ↵Arnd Bergmann2014-04-241-4/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Fixing uart-rx pull settings and a copy'n'paste error in a smp message * tag 'v3.15-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: fix copy'n'paste error in smp error messages ARM: rockchip: rk3188: enable pull-ups on UART RX pins Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: rockchip: rk3188: enable pull-ups on UART RX pinsMax Schwarz2014-04-151-4/+4
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default behaviour of the uart-rx pins on the rk3188 is to be pulled up and a lot of designs use diodes to even prevent them from being raised from the outside. Therefore change the rx-pin settings accordingly. This also fixes a uart receive problem on mass production Radxa Rock boards. Signed-off-by: Max Schwarz <max.schwarz@online.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* | | Merge tag 'imx-fixes-3.15' of ↵Arnd Bergmann2014-04-2418-50/+104
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes The i.MX fixes for 3.15: - A couple of dts changes for the fallout of imx-drm binding update - Parent DI clocks to video PLL for better HDMI support - PCIe interrupt mapping and GIC node fixes - A series of edmqmx6 board fixes - Other small and random fixes on imx5 and imx6 dts * tag 'imx-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: i.MX6: ipu_di_sel clocks can set parent rates ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel ARM: dts: imx: add required #clock-cells for fixed-clock ARM: dts: vybrid: drop address and size cells from GIC node ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 ARM: dts: imx53: fix apparent copy/paste error ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property ARM: dts: imx53-tx53: add IPU DI ports and endpoints ARM: dts: imx6: edmqmx6: add second STMPE ARM: dts: imx6: edmqmx6: USB H1 only supports host mode ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator ARM: dts: imx6: edmqmx6: Fix usbotg id pin ARM: dt: microsom: don't set bit 7 for ethernet mux settings ARM: imx6q-clk: parent lvds_gate from lvds_sel ARM: dts: imx: drop invalid size and address cells properties ARM: dts: mx5: fix wrong stmpe-ts bindings ARM: dts: imx53-m53evk: Fix memory region description ARM: dts: imx53-qsb-common: Fix memory region description ARM: dts: imx6: add PCIe interrupt mapping properties Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | ARM: dts: imx: add required #clock-cells for fixed-clockShawn Guo2014-04-1410-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: vybrid: drop address and size cells from GIC nodeLucas Stach2014-04-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11Fabio Estevam2014-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the bootloader has incorrectly configured the ALT mode of MX6SL_PAD_ECSPI1_SS0 pad, we end up with the following probe error: m25p80 spi0.0: found mr25h256, expected m25p32 m25p80 spi0.0: mr25h256 (32 Kbytes) In order to avoid this issue, add an entry for MX6SL_PAD_ECSPI1_SS0 pad, so that kernel configures the ECSPI chip select as GPIO functionality, which results in correct SPI NOR probe. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx53: fix apparent copy/paste errorLothar Waßmann2014-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'remote-endpoint' property should point back to ipu_di1_lvds1 rather than ipu_di0_lvds0. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' propertyShawn Guo2014-04-142-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit (655b43c staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs), 'crtcs' becomes a dead property. Remove it. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
| * | | ARM: dts: imx53-tx53: add IPU DI ports and endpointsShawn Guo2014-04-141-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent imx-drm device tree binding changes, we need to add IPU DI ports and endpoints for adapting. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Lothar Waßmann <LW@KARO-electronics.de>
| * | | ARM: dts: imx6: edmqmx6: add second STMPELucas Stach2014-04-141-9/+29
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx6: edmqmx6: USB H1 only supports host modeLucas Stach2014-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulatorSascha Hauer2014-04-141-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIO7_12 switches the D+/D- USB lines on and off. When we use this as VBUS regulator it means that USB device mode can never work as VBUS is never turned on in Device mode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx6: edmqmx6: Fix usbotg id pinLucas Stach2014-04-141-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dt: microsom: don't set bit 7 for ethernet mux settingsRussell King2014-04-141-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bit 6,7 are marked as reserved for the ethernet RGMII pins, so avoid setting these bits. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx: drop invalid size and address cells propertiesLucas Stach2014-04-142-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Those two properties should have been set to zero, which is the same as not specifying them. Having address-cells set to 1 causes OF interrupt mapping routines to add 1 to the interrupt-cells property and as result fail because all calculations are off by one. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: mx5: fix wrong stmpe-ts bindingsStefan Agner2014-04-141-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix bindings for STMPE touchscreen controller to match the documented bindings and the actual bindings used by the driver. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx53-m53evk: Fix memory region descriptionFabio Estevam2014-04-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On m53evk there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx53-qsb-common: Fix memory region descriptionFabio Estevam2014-04-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On mx53qsb there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
| * | | ARM: dts: imx6: add PCIe interrupt mapping propertiesLucas Stach2014-04-141-0/+8
| |/ / | | | | | | | | | | | | | | | | | | | | | As defined by the common PCI bindings. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* | | Merge tag 'mvebu-dt-fixes-non-crit-3.15' of ↵Arnd Bergmann2014-04-2412-11/+13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/linux-mvebu into fixes mvebu DT fixes-non-critical (for v3.15-rc1) - kirkwood - add some missing vendor prefixes to keep checkpatch happy - mvebu - add clock ref to mdio node on 370/XP/38x * tag 'mvebu-dt-fixes-non-crit-3.15' of git://git.infradead.org/linux-mvebu: ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x ARM: mvebu: ensure the mdio node has a clock reference on Armada 370/XP ARM: Kirkwood: DT: Add missing vendor prefix ARM: Kirkwood: Fix Atmel vendor prefix Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OpenPOWER on IntegriCloud