summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
Commit message (Expand)AuthorAgeFilesLines
* ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIMAlexander Shiyan2014-02-091-0/+10
* ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHCAlexander Shiyan2014-02-091-0/+15
* ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMICAlexander Shiyan2014-02-091-1/+2
* ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire moduleAlexander Shiyan2014-02-091-0/+12
* ARM: dts: imx27-phytec-phycore-som: Add NFC pin groupAlexander Shiyan2014-02-091-0/+14
* ARM: dts: Add support for the i.MX35.Steffen Trumtrar2014-02-091-0/+359
* ARM: dts: mxs: Add iio-hwmon to mx23 socAlexandre Belloni2014-02-091-1/+6
* ARM: dts: mxs: Add iio-hwmon to mx28 socAlexandre Belloni2014-02-091-0/+5
* ARM: dts: imx27-phytec-phycore-som: Rename file to .dtsiAlexander Shiyan2014-02-093-2/+1
* ARM: dts: imx27-phytec-phycore-som: Add pinctrl for CSPI1 and GPIOs used on m...Alexander Shiyan2014-02-091-0/+12
* ARM: dts: mxs: add #io-channel-cells to mx28 lradcAlexandre Belloni2014-02-091-0/+1
* ARM: i.MX28: dts: rename usbphy pin namesMichael Grzeschik2014-02-098-11/+11
* ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.Denis Carikli2014-02-093-0/+248
* ARM: mxs: Add support for the eukrea-cpuimx28.Eric Bénard2014-02-094-0/+449
* ARM: dts: mxs: Add a new pin config for the usb0 ID.Denis Carikli2014-02-091-0/+11
* ARM: dts: mxs: Add 18bit pin config for lcdif.Denis Carikli2014-02-091-0/+27
* ARM: dts: imx53: Enable AHCI SATA for imx53-qsbRobert Nelson2014-02-091-0/+4
* ARM: dts: i.MX27: Configure GPIOs as "input" by defaultAlexander Shiyan2014-02-091-192/+192
* ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keysGwenhael Goavec-Merou2014-02-091-3/+31
* ARM: dts: apf27dev: Add pwm supportGwenhael Goavec-Merou2014-02-091-0/+11
* ARM: dts: apf28dev: set gpio polarity for usb regulator and pinctrl for regul...Gwenhael Goavec-Merou2014-02-091-0/+13
* ARM: dts: i.MX27 boards: Switch to use standard GPIO and IRQ flags definitionsAlexander Shiyan2014-02-096-16/+20
* ARM: dts: imx27-phytec-phycore-som: Update FEC nodeAlexander Shiyan2014-02-091-0/+16
* ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera moduleAlexander Shiyan2014-02-091-0/+22
* ARM: dts: imx27-phytec-phycore-som: Add on-flash BBT supportAlexander Shiyan2014-02-091-0/+1
* ARM: dts: imx27: imx27-apf27dev: add pinctrl for cspi, i2c, sdhc and framebufferGwenhael Goavec-Merou2014-02-091-0/+89
* ARM: dts: imx27: imx27-apf27: add pinctrl for fec and uart1Gwenhael Goavec-Merou2014-02-091-0/+38
* ARM: dts: imx51-babbage: Define FEC reset pinAlexander Shiyan2014-02-091-0/+3
* ARM: dts: imx51-babbage: Fix chipselect level for dataflash on spi0.1Alexander Shiyan2014-02-091-1/+1
* ARM: dts: imx28-evk: Run I2C0 at 400kHzFabio Estevam2014-02-091-0/+1
* ARM: dts: imx27-apf27dev: fix display sizeGwenhael Goavec-Merou2014-02-091-2/+2
* ARM: dts: imx27 phycore pinctrlMarkus Pargmann2014-02-092-0/+65
* ARM: dts: imx27 phycore move uart1 to rdkMarkus Pargmann2014-02-092-4/+1
* ARM: dts: imx27 phyCARD-S pinctrlMarkus Pargmann2014-02-093-0/+93
* ARM: dts: imx27 iomux device nodeMarkus Pargmann2014-02-091-58/+66
* ARM: dts: imx53: Enable AHCI SATA for M53EVKMarek Vasut2014-02-091-0/+4
* ARM: dts: imx53: Add AHCI SATA DT nodeMarek Vasut2014-02-091-0/+11
* ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitionsAlexander Shiyan2014-02-094-11/+15
* ARM: dts: i.MX51: Move usbphy0 node from AIPS1Alexander Shiyan2014-02-091-7/+13
* ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DTMaxime Ripard2014-02-091-0/+2
* ARM: mxs: cfa10049: Add NAU7802 ADCs to the device treeMaxime Ripard2014-02-091-0/+24
* ARM: dts: imx53: Add USB support for M53EVKMarek Vasut2014-02-091-0/+22
* ARM: dts: imx53: Fix backlight for M53EVKMarek Vasut2014-02-091-2/+12
* ARM: dts: imx53: Fix display pinmux for M53EVKMarek Vasut2014-02-091-12/+34
* ARM: imx50: use clock defines in DTS filesLucas Stach2014-02-091-28/+51
* ARM: imx51: use clock defines in DTS filesLucas Stach2014-02-091-37/+61
* ARM: imx53: use clock defines in DTS filesLucas Stach2014-02-094-48/+80
* ARM: dts: imx27 pin functionsMarkus Pargmann2014-02-091-0/+526
* ARM: imx27-apf27dev: Add sdhci supportGwenhael Goavec-Merou2014-02-091-0/+6
* ARM: dts: i.MX51: Switch to use standard IRQ flags definitionsAlexander Shiyan2014-02-092-1/+2
OpenPOWER on IntegriCloud