summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7790.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: r8a7790: Add PMU device nodesGeert Uytterhoeven2018-05-141-0/+18
| | | | | | | | | | | | | | | | | | Enable support for the ARM Performance Monitor Units in the Cortex-A15 and Cortex-A7 CPU cores on R-Car H2 by adding device nodes for the two PMUs. New Linux output: hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available hw perfevents: /pmu-1: failed to probe PMU! hw perfevents: /pmu-1: failed to register PMU devices! The last two lines are due to the Cortex-A7 CPU cores being described in DT, but not enabled by the firmware. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Correct mask for GIC PPI interruptsGeert Uytterhoeven2018-05-141-5/+5
| | | | | | | | | | R-Car H2 (r8a7790) contains four Cortex-A15 and four Cortex-A7 cores, hence the second interrupt specifier cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(8)", to make sure interrupts can be delivered to all 8 processor cores. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Fix sort order of VSP1/FDP1 nodesKieran Bingham2018-05-011-9/+9
| | | | | | | | | | | | Commit 5d3b50d3c04d ("ARM: dts: renesas: r8a7790: Add FDP1 instances") introduced the FDP1 for the r8a7790, but broke the sort ordering of the device tree nodes. Move the last VSP up to it's peers to correct the ordering. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: renesas: r8a7790: Add FDP1 instancesLaurent Pinchart2018-04-251-0/+27
| | | | | | | | The r8a7790 has three FDP1 instances. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add watchdog support to SoC dtsiFabrizio Castro2018-04-251-0/+10
| | | | | | | | | | This commit adds watchdog support to the r8a7790 dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Adjust SMP routine sizeFabrizio Castro2018-04-251-1/+1
| | | | | | | | | | | This patch adjusts the definition of the SMP routine size according to the latest changes made by commit: "ARM: shmobile: Add watchdog support" Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: consistently use single space before =Simon Horman2018-02-121-5/+5
| | | | | | | | | | | Consistently use a single space before a =. This patch fixes instances where a tab is used instead. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: sort subnodes of root nodeSimon Horman2018-02-121-52/+52
| | | | | | | | | | Sort subnodes of root node to aid maintenance. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: sort subnodes of soc nodeSimon Horman2018-02-121-733/+733
| | | | | | | | | | | | Sort the subnodes of the soc node to improve maintainability. The sort key is the addresss on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: add soc nodeSimon Horman2018-02-121-1362/+1432
| | | | | | | | | | | | | | | | | | Add soc node to represent the bus and move all nodes with a base address into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car Gen2 SoCs to this scheme. The ordering is derived from simply moving each node with an address up to before any nodes without a base address that occur before the soc node. To improve maintainability follow-up patches will sort subnodes of both the new soc node and the root node. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: consistently use single space after =Simon Horman2018-02-121-37/+38
| | | | | | | | | | | | | | Consistently use a single space after a =. This patch removes instances where a tab or multiple spaces are used instead. It also avoids running over 80 columns in width in one of the lines where whitespace is updated. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Reduce size of thermal registersSimon Horman2018-02-121-1/+1
| | | | | | | | | | | | Reduce size of thermal registers in DT for r8a7790 (R-Car H2) SoC. According to the "User's Manual: Hardware" v2.00 the registers at base 0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the case on the r8a73a4 (R-Mobile APE6). This should not have any runtime affect as mapping granularity is PAGE_SIZE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* Merge tag 'renesas-dt2-for-v4.16' of ↵Olof Johansson2018-01-041-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.16 * r8a7745 (RZ/G1E) SoC - Enable SMP Fabrizio Castro says "Add DT node for the Advanced Power Management Unit (APMU), add the second CPU core, and use "renesas,apmu" as "enable-method"." * r8a7743 (RZ/G1M) SoC - Add node for thermal sensor module with thermal-zone support * r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs - Add: + Renesas Core Match Timer (CMT) support + Renesas Timer Pulse Unit PWM Controller (TPU) support + Renesas PWM Timer Controller (PWM) support * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms - Add sound support * r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs - Allow DTBs of boards of these SoCs to build without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05 + Move nodes which have no reg property out of bus, they don't belong there + Also sort sub-nodes of root node to allow for easier maintenance * r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs - Correct critical CPU temperature Chris Paterson says "The current R-Car Gen2 device trees define the CPU critical temperature as 115°C. The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. This value should also apply to r8a7792 but thermal sensor support has not been added yet." * r8a7740 (R-Mobile A1) SoC - Correct TPU register block size Geert Uytterhoven says "The Timer Pulse Unit has registers that lie outside the declared register block. Enlarge the register block size to fix this. This was probably based on the old platform code, which also assumed a register block size of 0x100." * tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (37 commits) ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS ARM: dts: iwg22d-sodimm: Sound DMA support on DTS ARM: dts: iwg22d-sodimm: Sound PIO support ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec ARM: dts: r8a7745: Add sound support ARM: dts: r8a7745: Add audio DMAC support ARM: dts: r8a7745: Add audio clocks ARM: dts: r8a7740: Correct TPU register block size ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus ARM: dts: r8a7743: sort root sub-nodes alphabetically ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS ARM: dts: iwg20d-q7-common: Sound DMA support on DTS ARM: dts: iwg20d-q7-common: Sound PIO support ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec ARM: dts: r8a7792: move timer node out of bus ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: r8a7790: Correct critical CPU temperatureChris Paterson2017-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The R-Car H2 hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: a8b805f3606f7af7 ("ARM: dts: r8a7790: enable to use thermal-zone") Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | Merge tag 'renesas-dt-for-v4.16' of ↵Arnd Bergmann2017-12-211-11/+12
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v4.16" from Simon Horman: * Convert to named i2c-gpio bindings Geert Uytterhoeven says "Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the more error-prone unnamed variant. This patch series switches all Renesas boards to the new bindings, and adds the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly assumed before..." ... Note that after this series is applied, the i2c-gpio buses are no longer detected when booting new DTBs on old (v4.14 and older) kernels, which should not be an issue. Booting old DTBs on new kernels is not affected." * Update DTS for CMT DT binding rework Geert Uytterhoeven says "This patch series updates the CMT device nodes in the various Renesas DTS files sh_cmt clocksource driver for the recent DT binding rework that was merged in v4.14-rc1 and v4.15-rc1..." * Add SMP support to r8a7794 (R-Car E2) SoC Sergei Shtylyov says "Add the device tree node for the Advanced Power Management Unit (APMU). Use the "enable-method" prop to point out that the APMU should be used for the SMP support." * Correct primary compatible value for eeprom on r7s72100 (RZ/A1H) genmai and r8a7791 (R-Car M2-W) koelsh boards Geert Uytterhoeven says "The Renesas part numbers of the two-wire serial interface EEPROMs do not follow the 24Cxx pattern, but the R1EX24xxx pattern. Hence change the primary compatible values to the appropriate variant of "renesas,r1ex24xxx", like is already done on Gose."" * Move cec_clock to root node on r8a7791 (R-Car M2-W) koelsh board r8a7791 (R-Car M2-W) koelsh board * Use R-Car SDHI and Ether Gen1 and 2 fallback compat strings Use recently posted R-Car SDHI and Ether Gen 1 and 2 fallback compat strings in the DT of Renesas ARM based SoCs. * Add IIC cores to dtsi of r8a7745 (RZ/G1E) SoC * Rework DT architecture for r8a7745 (RZ/G1E) iW-RainboW-G22D development platform and add serial support. Fabrizio Castro says "... define a new DT architecture for the iW-RainboW-G22D SODIMM Development Platform to include the configuration with the HDMI daughter board and to define the serial interfaces." * Add USB function support to r8a7745 (RZ/G1E) iW-RainboW-G22D development platform * Add PCIEC and ttySC3 support to r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM * Add VIN support to r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs * Add CAN and HDMI support to r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms * tag 'renesas-dt-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (61 commits) ARM: dts: alt: Convert to named i2c-gpio bindings ARM: dts: koelsch: Convert to named i2c-gpio bindings ARM: dts: lager: Convert to named i2c-gpio bindings ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings ARM: dts: sh73a0: Remove CMT renesas,channels-mask ARM: dts: r8a7794: Remove CMT renesas,channels-mask ARM: dts: r8a7793: Remove CMT renesas,channels-mask ARM: dts: r8a7791: Remove CMT renesas,channels-mask ARM: dts: r8a7790: Remove CMT renesas,channels-mask ARM: dts: r8a7740: Remove CMT renesas,channels-mask ARM: dts: r8a73a4: Remove CMT renesas,channels-mask ARM: dts: r8a7794: Update CMT compat strings ARM: dts: r8a7793: Update CMT compat strings ARM: dts: r8a7791: Update CMT compat strings ARM: dts: r8a7790: Update CMT compat strings ARM: dts: r8a73a4: Update CMT compat string ARM: dts: r8a7794: Add SMP support ARM: dts: genmai: Correct primary compatible value for eeprom ARM: dts: koelsch: Correct primary compatible value for eeprom ARM: dts: r8a7745: add VIN dt support ...
| * ARM: dts: r8a7790: Remove CMT renesas,channels-maskMagnus Damm2017-11-291-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Update the DTS to remove the now deprecated "renesas,channels-mask" property. The channel information is now kept in the device driver and can easily be determined based on the compat string. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * ARM: dts: r8a7790: Update CMT compat stringsMagnus Damm2017-11-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use recently updated R-Car Gen2 CMT0 and CMT1 compat strings. With this change in place we can keep device-specific configuration in the driver and the driver can be able to support CMT1 specific features. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * ARM: dts: r8a7790: Use R-Car SDHI Gen2 fallback compat stringSimon Horman2017-11-271-4/+8
| | | | | | | | | | | | | | | | | | | | Use newly added R-Car SDHI Gen2 fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * ARM: dts: r8a7790: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* | ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssrArnd Bergmann2017-11-201-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | With the latest dtc, we get many warnings about the missing '#reset-cells' property in these controllers, e.g.: arch/arm/boot/dts/r8a7790-lager.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /can@e6e80000:resets[0]) arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/dma-controller@e6700000:resets[0]) arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (resets_property): Missing property '#reset-cells' in node /soc/clock-controller@e6150000 or bad phandle (referred from /soc/ethernet@e6800000:resets[0]) arch/arm/boot/dts/r8a7793-gose.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /gpio@e6050000:resets[0]) arch/arm/boot/dts/r8a7794-alt.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /i2c@e6500000:resets[0]) arch/arm/boot/dts/r8a7794-silk.dtb: Warning (resets_property): Missing property '#reset-cells' in node /clock-controller@e6150000 or bad phandle (referred from /interrupt-controller@e61c0000:resets[0]) This adds it for the three r8a779x chips that were lacking it. The binding mandates this as <1>, so this is the value I use. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [geert: Add fix for r8a7793.dtsi] Fixes: 34fbd2b12761d111 ("ARM: dts: r8a7790: Add reset control properties") Fixes: 6e11a322f1d7505d ("ARM: dts: r8a7792: Add reset control properties") Fixes: 84fb19e1d201ba86 ("ARM: dts: r8a7793: Add reset control properties") Fixes: 615beb759ca494a4 ("ARM: dts: r8a7794: Add reset control properties") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add clocks for CA7 CPU coresGeert Uytterhoeven2017-10-161-0/+4
| | | | | | | | | | Currently only the CPU cores in the CA15 cluster have clocks properties. Add the missing clocks properties for the CPU cores in the CA7 cluster to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU coresGeert Uytterhoeven2017-10-161-0/+3
| | | | | | | | | | Currently only the primary CPU in the CA15 cluster has a clocks property, while the secondary CPU cores are driven by the same clock. Add the missing clocks properties to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat stringSimon Horman2017-10-161-6/+6
| | | | | | | | | | | | Use newly added R-Car GPIO Gen2 fallback compat string in place of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: add cpu capacity-dmips-mhz informationDietmar Eggemann2017-10-121-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | The following 'capacity-dmips-mhz' dt property values are used: Cortex-A15: 1024, Cortex-A7: 539 They have been derived form the cpu_efficiency values: Cortex-A15: 3891, Cortex-A7: 2048 by scaling them so that the Cortex-A15s (big cores) use 1024. The cpu_efficiency values were originally derived from the "Big.LITTLE Processing with ARM Cortex™-A15 & Cortex-A7" white paper (http://www.cl.cam.ac.uk/~rdm34/big.LITTLE.pdf). Table 1 lists 1.9x (3891/2048) as the Cortex-A15 vs Cortex-A7 performance ratio for the Dhrystone benchmark. The following platform is affected once cpu-invariant accounting support is re-connected to the task scheduler: r8a7790-lager Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Use generic node name for VSP1 nodesGeert Uytterhoeven2017-10-061-4/+4
| | | | | | | Use the preferred generic node name instead of the specific name. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add reset control propertiesGeert Uytterhoeven2017-09-191-0/+76
| | | | | | | | | | | | | | | | | Add properties to describe the reset topology for on-SoC devices: - Add the "#reset-cells" property to the CPG/MSSR device node, - Add resets and reset-names properties to the various device nodes. This allows to reset SoC devices using the Reset Controller API. Note that resets usually match the corresponding module clocks. Exceptions are: - The audio module has resets for the Serial Sound Interfaces only, - The display module has only a single reset for all DU channels, but adding reset properties for the display is postponed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Stop grouping clocks under a "clocks" subnodeGeert Uytterhoeven2017-09-181-71/+66
| | | | | | | | The current practice is to not group clocks under a "clocks" subnode, but just put them together with the other on-SoC devices. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Convert to new CPG/MSSR bindingsGeert Uytterhoeven2017-09-181-460/+97
| | | | | | | | | | | | | Convert the R-Car H2 SoC from the old "Renesas R-Car Gen2 Clock Pulse Generator (CPG)", "Renesas CPG DIV6 Clock", and "Renesas CPG Module Stop (MSTP) Clocks" DT bindings to the new unified "Renesas Clock Pulse Generator / Module Standby and Software Reset" DT bindings. This simplifies the DTS files, and allows to add support for reset control later. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat stringSimon Horman2017-08-171-2/+2
| | | | | | | | | | | Use newly added R-Car SATA Gen2 fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before the fallback compat string is considered. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for vin nodesSimon Horman2017-07-271-4/+4
| | | | | | | | | | | Use R-Car Gen 2 fallback binding for vind nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2 Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Reserve SRAM for the SMP jump stubGeert Uytterhoeven2017-07-271-0/+8
| | | | | | | Reserve SRAM for the jump stub for CPU core bringup. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add Inter Connect RAMGeert Uytterhoeven2017-07-271-0/+10
| | | | | | | R-Car H2 has 2 regions of Inter Connect RAM (72 + 4 KiB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a779x: Fix PCI bus dtc warningsRob Herring2017-06-121-10/+6
| | | | | | | | | | | | | | | The bogus 'device_type = "pci"' confuses dtc, causing lots of totally unrelated warnings. After fixing that, real warnings like arch/arm/boot/dts/r8a7790-lager.dtb: Warning (pci_device_reg): Node /pci@ee090000/usb@0,1 PCI unit address format error, expected "1,0" are left. Correct the unit-addresses and reg properties of the subnodes to fix these. Signed-off-by: Rob Herring <robh@kernel.org> [geert: Improve description] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: update PFC node name to pin-controllerSimon Horman2017-05-151-1/+1
| | | | | | | | | | | | | | The device trees for Renesas SoCs use either pfc or pin-controller as the node name for the PFC device. This patch is intended to take a step towards unifying the node name used as pin-controller which appears to be the more generic of the two and thus more in keeping with the DT specs. My analysis is that this is a user-visible change to the extent that kernel logs, and sysfs entries change from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node nameGeert Uytterhoeven2017-04-051-1/+1
| | | | | | | | | The current practice is to not add _clk suffixes to clock node names in DT, as these names are used as the actual clock names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Correct parent of SSI[0-9] clocksGeert Uytterhoeven2017-04-031-2/+5
| | | | | | | | | | The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: bcde372254386872 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add INTC-SYS clock to device treeGeert Uytterhoeven2017-03-101-3/+6
| | | | | | | | | | | Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVCKuninori Morimoto2017-03-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1. Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0. Because of this, current platform board (using SRC/DVC/SSI) Playback/Capture both will use same Audio-DMAC0 (but it depends on data path). First note is that this "rx" and "tx" are from each IP point, it doesn't mean Playback/Capture. Second note is that Audio DMAC assigned on DT is only for Audio-DMAC, Audio-DMAC-peri-peri has no entry. => Audio-DMAC -> Audio-DMAC-peri-peri -- HW connection Playback case [Mem] => [SRC]--[DVC] -> [SSI]--[Codec] rx ~~~~~~~~~~~~ Capture [Mem] <= [DVC]--[SRC] <- [SSI]--[Codec] tx ~~~~~~~~~~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Remove unit-addresses and regs from integrated cachesGeert Uytterhoeven2017-03-071-4/+2
| | | | | | | | | | The Cortex-A15/A7 cache controllers are integrated controllers, and thus the device nodes representing them should not have unit-addresses or reg properties. Fixes: 2c3de36700d4f3a5 ("ARM: dts: r8a7790: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: DTS: Fix register map for virt-capable GICMarc Zyngier2017-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since everybody copied my own mistake from the DT binding example, let's address all the offenders in one swift go. Most of them got the CPU interface size wrong (4kB, while it should be 8kB), except for both keystone platforms which got the control interface wrong (4kB instead of 8kB). In a few cases where I knew for sure what implementation was used, I've added the "arm,gic-400" compatible string. I'm 99% sure that this is what everyone is using, but short of having the TRM for all the other SoCs, I've left them alone. Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for msiof nodesSimon Horman2017-01-031-4/+8
| | | | | | | | | | | | Use recently added R-Car Gen 2 fallback binding for msiof nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for iic nodesSimon Horman2017-01-031-4/+8
| | | | | | | | | | | | Use recently added R-Car Gen 2 fallback binding for iic nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for i2c nodesSimon Horman2017-01-031-4/+4
| | | | | | | | | | | | Use recently added R-Car Gen 2 fallback binding for i2c nodes in DT for r8a7790 SoC. This has no run-time effect for the current driver as the initialisation sequence is the same for the SoC-specific binding for r8a7790 and the fallback binding for R-Car Gen 2. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Use renesas,rcar-gen2-usb-phy fallback bindingSimon Horman2017-01-031-1/+2
| | | | | | | | | A fallback binding for the Renesas R-Car Gen2 PHY driver was added by commit 7777cb8ba08d ("phy: rcar-gen2: add fallback binding"). This patch makes use of this binding in the DT for the r8a7790 SoC. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2016-12-151-3/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Arnd Bergmann: "Lots of changes as usual, so I'm trying to be brief here. Most of the new hardware support has the respective driver changes merged through other trees or has had it available for a while, so this is where things come together. We get a DT descriptions for a couple of new SoCs, all of them variants of other chips we already support, and usually coming with a new evaluation board: - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices - Qualcomm MDM9615 LTE baseband - NXP imx6ull, the latest and smallest i.MX6 application processor variant - Renesas RZ/G (r8a7743 and r8a7745) application processors - Rockchip PX3, a variant of the rk3188 chip used in Android tablets - Rockchip rk1108 single-core application processor - ST stm32f746 Cortex-M7 based microcontroller - TI DRA71x automotive processors These are commercially available consumer platforms we now support: - Motorola Droid 4 (xt894) mobile phone - Rikomagic MK808 Android TV stick based on Rockchips rx3066 - Cloud Engines PogoPlug v3 based on OX820 - Various Broadcom based wireless devices: - Netgear R8500 router - Tenda AC9 router - TP-LINK Archer C9 V1 - Luxul XAP-1510 Access point - Turris Omnia open hardware router based on Armada 385 And a couple of new boards targeted at developers, makers or industrial integration: - Macnica Sodia development platform for Altera socfpga (Cyclone V) - MicroZed board based on Xilinx Zynq FPGA platforms - TOPEET itop/elite based on exynos4412 - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615 - NextThing CHIP Pro gadget - NanoPi M1 development board - AM571x-IDK industrial board based on TI AM5718 - i.MX6SX UDOO Neo - Boundary Devices Nitrogen6_SOM2 (i.MX6) - Engicam i.CoreM6 - Grinn i.MX6UL liteSOM/liteBoard - Toradex Colibri iMX6 module Other changes: - added peripherals on renesas, davinci, stm32f429, uniphier, sti, mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm, mvebu, allwinner, broadcom, exynos, zynq - Continued fixes for W=1 dtc warnings - The old STiH415/416 SoC support gets removed, these never made it into products and have served their purpose in the kernel as a template for teh newer chips from ST - The exynos4415 dtsi file is removed as nothing uses it. - Intel PXA25x can now be booted using devicetree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits) arm: dts: zynq: Add MicroZed board support ARM: dts: da850: enable high speed for mmc ARM: dts: da850: Add node for pullup/pulldown pinconf ARM: dts: da850: enable memctrl and mstpri nodes per board ARM: dts: da850-lcdk: Add ethernet0 alias to DT ARM: dts: artpec: add pcie support ARM: dts: add support for Turris Omnia devicetree: Add vendor prefix for CZ.NIC ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node ARM: dts: berlin2q-marvell-dmp: fix regulators' name ARM: dts: Add xo to sdhc clock node on qcom platforms ARM: dts: r8a7794: Add device node for PRR ARM: dts: r8a7793: Add device node for PRR ARM: dts: r8a7792: Add device node for PRR ARM: dts: r8a7791: Add device node for PRR ARM: dts: r8a7790: Add device node for PRR ARM: dts: r8a7779: Add device node for PRR ARM: dts: r8a73a4: Add device node for PRR ARM: dts: sk-rzg1e: add Ether support ARM: dts: sk-rzg1e: initial device tree ...
| * ARM: dts: r8a7790: Add device node for PRRGeert Uytterhoeven2016-11-231-0/+5
| | | | | | | | | | | | | | | | Add a device node for the Product Register, which provides SoC product and revision information. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| * ARM: dts: r8a7790: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven2016-11-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | ARM: dts: r8a7790: Add device node for RST moduleGeert Uytterhoeven2016-11-021-0/+5
|/ | | | | | | | Add a device node for the RST module, which provides a.o. reset control and mode pin monitoring. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
* ARM: dts: r8a7790: Remove obsolete vsp1 propertiesGeert Uytterhoeven2016-08-171-23/+0
| | | | | | | | | | As of commit 5aa2eb3c86d4fd16 ("[media] v4l: vsp1: Configure device based on IP version"), the DT properties to identify the exact VSP device instance features are no longer used. Hence remove them. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7790: Add APMU nodesMagnus Damm2016-06-291-0/+13
| | | | | | | | | | Add DT nodes for the Advanced Power Management Units (APMU), and use the enable-method to point out that the APMU should be used for SMP support. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
OpenPOWER on IntegriCloud